mirror of
https://github.com/t2linux/kernel.git
synced 2026-04-30 13:48:59 -07:00
Merge 4.18-rc3 into tty-next
We want ths tty core changes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Greg Kroah-Hartman
@@ -324,8 +324,7 @@ Global Attributes
|
||||
|
||||
``intel_pstate`` exposes several global attributes (files) in ``sysfs`` to
|
||||
control its functionality at the system level. They are located in the
|
||||
``/sys/devices/system/cpu/cpufreq/intel_pstate/`` directory and affect all
|
||||
CPUs.
|
||||
``/sys/devices/system/cpu/intel_pstate/`` directory and affect all CPUs.
|
||||
|
||||
Some of them are not present if the ``intel_pstate=per_cpu_perf_limits``
|
||||
argument is passed to the kernel in the command line.
|
||||
@@ -379,6 +378,17 @@ argument is passed to the kernel in the command line.
|
||||
but it affects the maximum possible value of per-policy P-state limits
|
||||
(see `Interpretation of Policy Attributes`_ below for details).
|
||||
|
||||
``hwp_dynamic_boost``
|
||||
This attribute is only present if ``intel_pstate`` works in the
|
||||
`active mode with the HWP feature enabled <Active Mode With HWP_>`_ in
|
||||
the processor. If set (equal to 1), it causes the minimum P-state limit
|
||||
to be increased dynamically for a short time whenever a task previously
|
||||
waiting on I/O is selected to run on a given logical CPU (the purpose
|
||||
of this mechanism is to improve performance).
|
||||
|
||||
This setting has no effect on logical CPUs whose minimum P-state limit
|
||||
is directly set to the highest non-turbo P-state or above it.
|
||||
|
||||
.. _status_attr:
|
||||
|
||||
``status``
|
||||
|
||||
@@ -0,0 +1,23 @@
|
||||
Spreadtrum SC27xx PMIC Vibrator
|
||||
|
||||
Required properties:
|
||||
- compatible: should be "sprd,sc2731-vibrator".
|
||||
- reg: address of vibrator control register.
|
||||
|
||||
Example :
|
||||
|
||||
sc2731_pmic: pmic@0 {
|
||||
compatible = "sprd,sc2731";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <26000000>;
|
||||
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
vibrator@eb4 {
|
||||
compatible = "sprd,sc2731-vibrator";
|
||||
reg = <0xeb4>;
|
||||
};
|
||||
};
|
||||
@@ -441,8 +441,6 @@ prototypes:
|
||||
int (*iterate) (struct file *, struct dir_context *);
|
||||
int (*iterate_shared) (struct file *, struct dir_context *);
|
||||
__poll_t (*poll) (struct file *, struct poll_table_struct *);
|
||||
struct wait_queue_head * (*get_poll_head)(struct file *, __poll_t);
|
||||
__poll_t (*poll_mask) (struct file *, __poll_t);
|
||||
long (*unlocked_ioctl) (struct file *, unsigned int, unsigned long);
|
||||
long (*compat_ioctl) (struct file *, unsigned int, unsigned long);
|
||||
int (*mmap) (struct file *, struct vm_area_struct *);
|
||||
@@ -473,7 +471,7 @@ prototypes:
|
||||
};
|
||||
|
||||
locking rules:
|
||||
All except for ->poll_mask may block.
|
||||
All may block.
|
||||
|
||||
->llseek() locking has moved from llseek to the individual llseek
|
||||
implementations. If your fs is not using generic_file_llseek, you
|
||||
@@ -505,9 +503,6 @@ in sys_read() and friends.
|
||||
the lease within the individual filesystem to record the result of the
|
||||
operation
|
||||
|
||||
->poll_mask can be called with or without the waitqueue lock for the waitqueue
|
||||
returned from ->get_poll_head.
|
||||
|
||||
--------------------------- dquot_operations -------------------------------
|
||||
prototypes:
|
||||
int (*write_dquot) (struct dquot *);
|
||||
|
||||
@@ -857,8 +857,6 @@ struct file_operations {
|
||||
ssize_t (*write_iter) (struct kiocb *, struct iov_iter *);
|
||||
int (*iterate) (struct file *, struct dir_context *);
|
||||
__poll_t (*poll) (struct file *, struct poll_table_struct *);
|
||||
struct wait_queue_head * (*get_poll_head)(struct file *, __poll_t);
|
||||
__poll_t (*poll_mask) (struct file *, __poll_t);
|
||||
long (*unlocked_ioctl) (struct file *, unsigned int, unsigned long);
|
||||
long (*compat_ioctl) (struct file *, unsigned int, unsigned long);
|
||||
int (*mmap) (struct file *, struct vm_area_struct *);
|
||||
@@ -903,17 +901,6 @@ otherwise noted.
|
||||
activity on this file and (optionally) go to sleep until there
|
||||
is activity. Called by the select(2) and poll(2) system calls
|
||||
|
||||
get_poll_head: Returns the struct wait_queue_head that callers can
|
||||
wait on. Callers need to check the returned events using ->poll_mask
|
||||
once woken. Can return NULL to indicate polling is not supported,
|
||||
or any error code using the ERR_PTR convention to indicate that a
|
||||
grave error occured and ->poll_mask shall not be called.
|
||||
|
||||
poll_mask: return the mask of EPOLL* values describing the file descriptor
|
||||
state. Called either before going to sleep on the waitqueue returned by
|
||||
get_poll_head, or after it has been woken. If ->get_poll_head and
|
||||
->poll_mask are implemented ->poll does not need to be implement.
|
||||
|
||||
unlocked_ioctl: called by the ioctl(2) system call.
|
||||
|
||||
compat_ioctl: called by the ioctl(2) system call when 32 bit system calls
|
||||
|
||||
@@ -430,6 +430,12 @@ This sets the config program's title bar if the config program chooses
|
||||
to use it. It should be placed at the top of the configuration, before any
|
||||
other statement.
|
||||
|
||||
'#' Kconfig source file comment:
|
||||
|
||||
An unquoted '#' character anywhere in a source file line indicates
|
||||
the beginning of a source file comment. The remainder of that line
|
||||
is a comment.
|
||||
|
||||
|
||||
Kconfig hints
|
||||
-------------
|
||||
|
||||
@@ -1,3 +1,4 @@
|
||||
==============================================================
|
||||
Linux* Base Driver for the Intel(R) PRO/100 Family of Adapters
|
||||
==============================================================
|
||||
|
||||
@@ -86,83 +87,84 @@ Event Log Message Level: The driver uses the message level flag to log events
|
||||
Additional Configurations
|
||||
=========================
|
||||
|
||||
Configuring the Driver on Different Distributions
|
||||
-------------------------------------------------
|
||||
Configuring the Driver on Different Distributions
|
||||
-------------------------------------------------
|
||||
|
||||
Configuring a network driver to load properly when the system is started is
|
||||
distribution dependent. Typically, the configuration process involves adding
|
||||
an alias line to /etc/modprobe.d/*.conf as well as editing other system
|
||||
startup scripts and/or configuration files. Many popular Linux
|
||||
distributions ship with tools to make these changes for you. To learn the
|
||||
proper way to configure a network device for your system, refer to your
|
||||
distribution documentation. If during this process you are asked for the
|
||||
driver or module name, the name for the Linux Base Driver for the Intel
|
||||
PRO/100 Family of Adapters is e100.
|
||||
Configuring a network driver to load properly when the system is started
|
||||
is distribution dependent. Typically, the configuration process involves
|
||||
adding an alias line to /etc/modprobe.d/*.conf as well as editing other
|
||||
system startup scripts and/or configuration files. Many popular Linux
|
||||
distributions ship with tools to make these changes for you. To learn
|
||||
the proper way to configure a network device for your system, refer to
|
||||
your distribution documentation. If during this process you are asked
|
||||
for the driver or module name, the name for the Linux Base Driver for
|
||||
the Intel PRO/100 Family of Adapters is e100.
|
||||
|
||||
As an example, if you install the e100 driver for two PRO/100 adapters
|
||||
(eth0 and eth1), add the following to a configuration file in /etc/modprobe.d/
|
||||
As an example, if you install the e100 driver for two PRO/100 adapters
|
||||
(eth0 and eth1), add the following to a configuration file in
|
||||
/etc/modprobe.d/::
|
||||
|
||||
alias eth0 e100
|
||||
alias eth1 e100
|
||||
|
||||
Viewing Link Messages
|
||||
---------------------
|
||||
In order to see link messages and other Intel driver information on your
|
||||
console, you must set the dmesg level up to six. This can be done by
|
||||
entering the following on the command line before loading the e100 driver::
|
||||
Viewing Link Messages
|
||||
---------------------
|
||||
|
||||
In order to see link messages and other Intel driver information on your
|
||||
console, you must set the dmesg level up to six. This can be done by
|
||||
entering the following on the command line before loading the e100
|
||||
driver::
|
||||
|
||||
dmesg -n 6
|
||||
|
||||
If you wish to see all messages issued by the driver, including debug
|
||||
messages, set the dmesg level to eight.
|
||||
If you wish to see all messages issued by the driver, including debug
|
||||
messages, set the dmesg level to eight.
|
||||
|
||||
NOTE: This setting is not saved across reboots.
|
||||
NOTE: This setting is not saved across reboots.
|
||||
|
||||
ethtool
|
||||
-------
|
||||
|
||||
ethtool
|
||||
-------
|
||||
The driver utilizes the ethtool interface for driver configuration and
|
||||
diagnostics, as well as displaying statistical information. The ethtool
|
||||
version 1.6 or later is required for this functionality.
|
||||
|
||||
The driver utilizes the ethtool interface for driver configuration and
|
||||
diagnostics, as well as displaying statistical information. The ethtool
|
||||
version 1.6 or later is required for this functionality.
|
||||
The latest release of ethtool can be found from
|
||||
https://www.kernel.org/pub/software/network/ethtool/
|
||||
|
||||
The latest release of ethtool can be found from
|
||||
https://www.kernel.org/pub/software/network/ethtool/
|
||||
Enabling Wake on LAN* (WoL)
|
||||
---------------------------
|
||||
WoL is provided through the ethtool* utility. For instructions on
|
||||
enabling WoL with ethtool, refer to the ethtool man page. WoL will be
|
||||
enabled on the system during the next shut down or reboot. For this
|
||||
driver version, in order to enable WoL, the e100 driver must be loaded
|
||||
when shutting down or rebooting the system.
|
||||
|
||||
Enabling Wake on LAN* (WoL)
|
||||
---------------------------
|
||||
WoL is provided through the ethtool* utility. For instructions on enabling
|
||||
WoL with ethtool, refer to the ethtool man page.
|
||||
NAPI
|
||||
----
|
||||
|
||||
WoL will be enabled on the system during the next shut down or reboot. For
|
||||
this driver version, in order to enable WoL, the e100 driver must be
|
||||
loaded when shutting down or rebooting the system.
|
||||
NAPI (Rx polling mode) is supported in the e100 driver.
|
||||
|
||||
NAPI
|
||||
----
|
||||
See https://wiki.linuxfoundation.org/networking/napi for more
|
||||
information on NAPI.
|
||||
|
||||
NAPI (Rx polling mode) is supported in the e100 driver.
|
||||
Multiple Interfaces on Same Ethernet Broadcast Network
|
||||
------------------------------------------------------
|
||||
|
||||
See https://wiki.linuxfoundation.org/networking/napi for more information
|
||||
on NAPI.
|
||||
Due to the default ARP behavior on Linux, it is not possible to have one
|
||||
system on two IP networks in the same Ethernet broadcast domain
|
||||
(non-partitioned switch) behave as expected. All Ethernet interfaces
|
||||
will respond to IP traffic for any IP address assigned to the system.
|
||||
This results in unbalanced receive traffic.
|
||||
|
||||
Multiple Interfaces on Same Ethernet Broadcast Network
|
||||
------------------------------------------------------
|
||||
If you have multiple interfaces in a server, either turn on ARP
|
||||
filtering by
|
||||
|
||||
Due to the default ARP behavior on Linux, it is not possible to have
|
||||
one system on two IP networks in the same Ethernet broadcast domain
|
||||
(non-partitioned switch) behave as expected. All Ethernet interfaces
|
||||
will respond to IP traffic for any IP address assigned to the system.
|
||||
This results in unbalanced receive traffic.
|
||||
(1) entering:: echo 1 > /proc/sys/net/ipv4/conf/all/arp_filter
|
||||
(this only works if your kernel's version is higher than 2.4.5), or
|
||||
|
||||
If you have multiple interfaces in a server, either turn on ARP
|
||||
filtering by
|
||||
|
||||
(1) entering:: echo 1 > /proc/sys/net/ipv4/conf/all/arp_filter
|
||||
(this only works if your kernel's version is higher than 2.4.5), or
|
||||
|
||||
(2) installing the interfaces in separate broadcast domains (either
|
||||
in different switches or in a switch partitioned to VLANs).
|
||||
(2) installing the interfaces in separate broadcast domains (either
|
||||
in different switches or in a switch partitioned to VLANs).
|
||||
|
||||
|
||||
Support
|
||||
|
||||
@@ -1,3 +1,4 @@
|
||||
===========================================================
|
||||
Linux* Base Driver for Intel(R) Ethernet Network Connection
|
||||
===========================================================
|
||||
|
||||
@@ -354,57 +355,58 @@ previously mentioned to force the adapter to the same speed and duplex.
|
||||
Additional Configurations
|
||||
=========================
|
||||
|
||||
Jumbo Frames
|
||||
------------
|
||||
Jumbo Frames support is enabled by changing the MTU to a value larger than
|
||||
the default of 1500. Use the ifconfig command to increase the MTU size.
|
||||
For example::
|
||||
Jumbo Frames
|
||||
------------
|
||||
Jumbo Frames support is enabled by changing the MTU to a value larger
|
||||
than the default of 1500. Use the ifconfig command to increase the MTU
|
||||
size. For example::
|
||||
|
||||
ifconfig eth<x> mtu 9000 up
|
||||
|
||||
This setting is not saved across reboots. It can be made permanent if
|
||||
you add::
|
||||
This setting is not saved across reboots. It can be made permanent if
|
||||
you add::
|
||||
|
||||
MTU=9000
|
||||
|
||||
to the file /etc/sysconfig/network-scripts/ifcfg-eth<x>. This example
|
||||
applies to the Red Hat distributions; other distributions may store this
|
||||
setting in a different location.
|
||||
to the file /etc/sysconfig/network-scripts/ifcfg-eth<x>. This example
|
||||
applies to the Red Hat distributions; other distributions may store this
|
||||
setting in a different location.
|
||||
|
||||
Notes:
|
||||
Degradation in throughput performance may be observed in some Jumbo frames
|
||||
environments. If this is observed, increasing the application's socket buffer
|
||||
size and/or increasing the /proc/sys/net/ipv4/tcp_*mem entry values may help.
|
||||
See the specific application manual and /usr/src/linux*/Documentation/
|
||||
networking/ip-sysctl.txt for more details.
|
||||
Notes: Degradation in throughput performance may be observed in some
|
||||
Jumbo frames environments. If this is observed, increasing the
|
||||
application's socket buffer size and/or increasing the
|
||||
/proc/sys/net/ipv4/tcp_*mem entry values may help. See the specific
|
||||
application manual and /usr/src/linux*/Documentation/
|
||||
networking/ip-sysctl.txt for more details.
|
||||
|
||||
- The maximum MTU setting for Jumbo Frames is 16110. This value coincides
|
||||
with the maximum Jumbo Frames size of 16128.
|
||||
- The maximum MTU setting for Jumbo Frames is 16110. This value
|
||||
coincides with the maximum Jumbo Frames size of 16128.
|
||||
|
||||
- Using Jumbo frames at 10 or 100 Mbps is not supported and may result in
|
||||
poor performance or loss of link.
|
||||
- Using Jumbo frames at 10 or 100 Mbps is not supported and may result
|
||||
in poor performance or loss of link.
|
||||
|
||||
- Adapters based on the Intel(R) 82542 and 82573V/E controller do not
|
||||
support Jumbo Frames. These correspond to the following product names:
|
||||
Intel(R) PRO/1000 Gigabit Server Adapter
|
||||
Intel(R) PRO/1000 PM Network Connection
|
||||
- Adapters based on the Intel(R) 82542 and 82573V/E controller do not
|
||||
support Jumbo Frames. These correspond to the following product names:
|
||||
Intel(R) PRO/1000 Gigabit Server Adapter Intel(R) PRO/1000 PM Network
|
||||
Connection
|
||||
|
||||
ethtool
|
||||
-------
|
||||
The driver utilizes the ethtool interface for driver configuration and
|
||||
diagnostics, as well as displaying statistical information. The ethtool
|
||||
version 1.6 or later is required for this functionality.
|
||||
ethtool
|
||||
-------
|
||||
The driver utilizes the ethtool interface for driver configuration and
|
||||
diagnostics, as well as displaying statistical information. The ethtool
|
||||
version 1.6 or later is required for this functionality.
|
||||
|
||||
The latest release of ethtool can be found from
|
||||
https://www.kernel.org/pub/software/network/ethtool/
|
||||
The latest release of ethtool can be found from
|
||||
https://www.kernel.org/pub/software/network/ethtool/
|
||||
|
||||
Enabling Wake on LAN* (WoL)
|
||||
---------------------------
|
||||
WoL is configured through the ethtool* utility.
|
||||
Enabling Wake on LAN* (WoL)
|
||||
---------------------------
|
||||
WoL is configured through the ethtool* utility.
|
||||
|
||||
WoL will be enabled on the system during the next shut down or reboot.
|
||||
For this driver version, in order to enable WoL, the e1000 driver must be
|
||||
loaded when shutting down or rebooting the system.
|
||||
|
||||
WoL will be enabled on the system during the next shut down or reboot.
|
||||
For this driver version, in order to enable WoL, the e1000 driver must be
|
||||
loaded when shutting down or rebooting the system.
|
||||
|
||||
Support
|
||||
=======
|
||||
|
||||
@@ -48,7 +48,7 @@ void strp_pause(struct strparser *strp)
|
||||
Temporarily pause a stream parser. Message parsing is suspended
|
||||
and no new messages are delivered to the upper layer.
|
||||
|
||||
void strp_pause(struct strparser *strp)
|
||||
void strp_unpause(struct strparser *strp)
|
||||
|
||||
Unpause a paused stream parser.
|
||||
|
||||
|
||||
@@ -226,7 +226,7 @@ $ rm configs/<config name>.<number>/<function>
|
||||
where <config name>.<number> specify the configuration and <function> is
|
||||
a symlink to a function being removed from the configuration, e.g.:
|
||||
|
||||
$ rm configfs/c.1/ncm.usb0
|
||||
$ rm configs/c.1/ncm.usb0
|
||||
|
||||
...
|
||||
...
|
||||
|
||||
+20
-6
@@ -2971,9 +2971,13 @@ N: bcm585*
|
||||
N: bcm586*
|
||||
N: bcm88312
|
||||
N: hr2
|
||||
F: arch/arm64/boot/dts/broadcom/ns2*
|
||||
N: stingray
|
||||
F: arch/arm64/boot/dts/broadcom/northstar2/*
|
||||
F: arch/arm64/boot/dts/broadcom/stingray/*
|
||||
F: drivers/clk/bcm/clk-ns*
|
||||
F: drivers/clk/bcm/clk-sr*
|
||||
F: drivers/pinctrl/bcm/pinctrl-ns*
|
||||
F: include/dt-bindings/clock/bcm-sr*
|
||||
|
||||
BROADCOM KONA GPIO DRIVER
|
||||
M: Ray Jui <rjui@broadcom.com>
|
||||
@@ -5669,7 +5673,7 @@ F: drivers/crypto/caam/
|
||||
F: Documentation/devicetree/bindings/crypto/fsl-sec4.txt
|
||||
|
||||
FREESCALE DIU FRAMEBUFFER DRIVER
|
||||
M: Timur Tabi <timur@tabi.org>
|
||||
M: Timur Tabi <timur@kernel.org>
|
||||
L: linux-fbdev@vger.kernel.org
|
||||
S: Maintained
|
||||
F: drivers/video/fbdev/fsl-diu-fb.*
|
||||
@@ -5769,7 +5773,7 @@ S: Maintained
|
||||
F: drivers/net/wan/fsl_ucc_hdlc*
|
||||
|
||||
FREESCALE QUICC ENGINE UCC UART DRIVER
|
||||
M: Timur Tabi <timur@tabi.org>
|
||||
M: Timur Tabi <timur@kernel.org>
|
||||
L: linuxppc-dev@lists.ozlabs.org
|
||||
S: Maintained
|
||||
F: drivers/tty/serial/ucc_uart.c
|
||||
@@ -5793,7 +5797,7 @@ F: drivers/net/ethernet/freescale/fs_enet/
|
||||
F: include/linux/fs_enet_pd.h
|
||||
|
||||
FREESCALE SOC SOUND DRIVERS
|
||||
M: Timur Tabi <timur@tabi.org>
|
||||
M: Timur Tabi <timur@kernel.org>
|
||||
M: Nicolin Chen <nicoleotsuka@gmail.com>
|
||||
M: Xiubo Li <Xiubo.Lee@gmail.com>
|
||||
R: Fabio Estevam <fabio.estevam@nxp.com>
|
||||
@@ -9882,6 +9886,7 @@ M: Andrew Lunn <andrew@lunn.ch>
|
||||
M: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
|
||||
M: Florian Fainelli <f.fainelli@gmail.com>
|
||||
S: Maintained
|
||||
F: Documentation/devicetree/bindings/net/dsa/
|
||||
F: net/dsa/
|
||||
F: include/net/dsa.h
|
||||
F: include/linux/dsa/
|
||||
@@ -11476,6 +11481,15 @@ W: http://wireless.kernel.org/en/users/Drivers/p54
|
||||
S: Obsolete
|
||||
F: drivers/net/wireless/intersil/prism54/
|
||||
|
||||
PROC FILESYSTEM
|
||||
R: Alexey Dobriyan <adobriyan@gmail.com>
|
||||
L: linux-kernel@vger.kernel.org
|
||||
L: linux-fsdevel@vger.kernel.org
|
||||
S: Maintained
|
||||
F: fs/proc/
|
||||
F: include/linux/proc_fs.h
|
||||
F: tools/testing/selftests/proc/
|
||||
|
||||
PROC SYSCTL
|
||||
M: "Luis R. Rodriguez" <mcgrof@kernel.org>
|
||||
M: Kees Cook <keescook@chromium.org>
|
||||
@@ -11808,9 +11822,9 @@ F: Documentation/devicetree/bindings/opp/kryo-cpufreq.txt
|
||||
F: drivers/cpufreq/qcom-cpufreq-kryo.c
|
||||
|
||||
QUALCOMM EMAC GIGABIT ETHERNET DRIVER
|
||||
M: Timur Tabi <timur@codeaurora.org>
|
||||
M: Timur Tabi <timur@kernel.org>
|
||||
L: netdev@vger.kernel.org
|
||||
S: Supported
|
||||
S: Maintained
|
||||
F: drivers/net/ethernet/qualcomm/emac/
|
||||
|
||||
QUALCOMM HEXAGON ARCHITECTURE
|
||||
|
||||
@@ -2,7 +2,7 @@
|
||||
VERSION = 4
|
||||
PATCHLEVEL = 18
|
||||
SUBLEVEL = 0
|
||||
EXTRAVERSION = -rc2
|
||||
EXTRAVERSION = -rc3
|
||||
NAME = Merciless Moray
|
||||
|
||||
# *DOCUMENTATION*
|
||||
|
||||
+7
-1
@@ -1245,8 +1245,14 @@ config PCI
|
||||
VESA. If you have PCI, say Y, otherwise N.
|
||||
|
||||
config PCI_DOMAINS
|
||||
bool
|
||||
bool "Support for multiple PCI domains"
|
||||
depends on PCI
|
||||
help
|
||||
Enable PCI domains kernel management. Say Y if your machine
|
||||
has a PCI bus hierarchy that requires more than one PCI
|
||||
domain (aka segment) to be correctly managed. Say N otherwise.
|
||||
|
||||
If you don't know what to do here, say N.
|
||||
|
||||
config PCI_DOMAINS_GENERIC
|
||||
def_bool PCI_DOMAINS
|
||||
|
||||
@@ -139,7 +139,7 @@
|
||||
3700 5
|
||||
3900 6
|
||||
4000 7>;
|
||||
cooling-cells = <2>;
|
||||
#cooling-cells = <2>;
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
|
||||
@@ -216,7 +216,7 @@
|
||||
reg = <0x18008000 0x100>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
interrupts = <GIC_SPI 85 IRQ_TYPE_NONE>;
|
||||
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clock-frequency = <100000>;
|
||||
status = "disabled";
|
||||
};
|
||||
@@ -245,7 +245,7 @@
|
||||
reg = <0x1800b000 0x100>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
interrupts = <GIC_SPI 86 IRQ_TYPE_NONE>;
|
||||
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clock-frequency = <100000>;
|
||||
status = "disabled";
|
||||
};
|
||||
@@ -256,7 +256,7 @@
|
||||
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-map-mask = <0 0 0 0>;
|
||||
interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_NONE>;
|
||||
interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
||||
linux,pci-domain = <0>;
|
||||
|
||||
@@ -278,10 +278,10 @@
|
||||
compatible = "brcm,iproc-msi";
|
||||
msi-controller;
|
||||
interrupt-parent = <&gic>;
|
||||
interrupts = <GIC_SPI 96 IRQ_TYPE_NONE>,
|
||||
<GIC_SPI 97 IRQ_TYPE_NONE>,
|
||||
<GIC_SPI 98 IRQ_TYPE_NONE>,
|
||||
<GIC_SPI 99 IRQ_TYPE_NONE>;
|
||||
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
@@ -291,7 +291,7 @@
|
||||
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-map-mask = <0 0 0 0>;
|
||||
interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_NONE>;
|
||||
interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
||||
linux,pci-domain = <1>;
|
||||
|
||||
@@ -313,10 +313,10 @@
|
||||
compatible = "brcm,iproc-msi";
|
||||
msi-controller;
|
||||
interrupt-parent = <&gic>;
|
||||
interrupts = <GIC_SPI 102 IRQ_TYPE_NONE>,
|
||||
<GIC_SPI 103 IRQ_TYPE_NONE>,
|
||||
<GIC_SPI 104 IRQ_TYPE_NONE>,
|
||||
<GIC_SPI 105 IRQ_TYPE_NONE>;
|
||||
interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
@@ -264,7 +264,7 @@
|
||||
reg = <0x38000 0x50>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
interrupts = <GIC_SPI 95 IRQ_TYPE_NONE>;
|
||||
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clock-frequency = <100000>;
|
||||
};
|
||||
|
||||
@@ -279,7 +279,7 @@
|
||||
reg = <0x3b000 0x50>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
interrupts = <GIC_SPI 96 IRQ_TYPE_NONE>;
|
||||
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clock-frequency = <100000>;
|
||||
};
|
||||
};
|
||||
@@ -300,7 +300,7 @@
|
||||
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-map-mask = <0 0 0 0>;
|
||||
interrupt-map = <0 0 0 0 &gic GIC_SPI 186 IRQ_TYPE_NONE>;
|
||||
interrupt-map = <0 0 0 0 &gic GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
||||
linux,pci-domain = <0>;
|
||||
|
||||
@@ -322,10 +322,10 @@
|
||||
compatible = "brcm,iproc-msi";
|
||||
msi-controller;
|
||||
interrupt-parent = <&gic>;
|
||||
interrupts = <GIC_SPI 182 IRQ_TYPE_NONE>,
|
||||
<GIC_SPI 183 IRQ_TYPE_NONE>,
|
||||
<GIC_SPI 184 IRQ_TYPE_NONE>,
|
||||
<GIC_SPI 185 IRQ_TYPE_NONE>;
|
||||
interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
|
||||
brcm,pcie-msi-inten;
|
||||
};
|
||||
};
|
||||
@@ -336,7 +336,7 @@
|
||||
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-map-mask = <0 0 0 0>;
|
||||
interrupt-map = <0 0 0 0 &gic GIC_SPI 192 IRQ_TYPE_NONE>;
|
||||
interrupt-map = <0 0 0 0 &gic GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
||||
linux,pci-domain = <1>;
|
||||
|
||||
@@ -358,10 +358,10 @@
|
||||
compatible = "brcm,iproc-msi";
|
||||
msi-controller;
|
||||
interrupt-parent = <&gic>;
|
||||
interrupts = <GIC_SPI 188 IRQ_TYPE_NONE>,
|
||||
<GIC_SPI 189 IRQ_TYPE_NONE>,
|
||||
<GIC_SPI 190 IRQ_TYPE_NONE>,
|
||||
<GIC_SPI 191 IRQ_TYPE_NONE>;
|
||||
interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
|
||||
brcm,pcie-msi-inten;
|
||||
};
|
||||
};
|
||||
|
||||
@@ -391,7 +391,7 @@
|
||||
reg = <0x38000 0x50>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
interrupts = <GIC_SPI 89 IRQ_TYPE_NONE>;
|
||||
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clock-frequency = <100000>;
|
||||
dma-coherent;
|
||||
status = "disabled";
|
||||
@@ -496,7 +496,7 @@
|
||||
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-map-mask = <0 0 0 0>;
|
||||
interrupt-map = <0 0 0 0 &gic GIC_SPI 131 IRQ_TYPE_NONE>;
|
||||
interrupt-map = <0 0 0 0 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
||||
linux,pci-domain = <0>;
|
||||
|
||||
@@ -519,10 +519,10 @@
|
||||
compatible = "brcm,iproc-msi";
|
||||
msi-controller;
|
||||
interrupt-parent = <&gic>;
|
||||
interrupts = <GIC_SPI 127 IRQ_TYPE_NONE>,
|
||||
<GIC_SPI 128 IRQ_TYPE_NONE>,
|
||||
<GIC_SPI 129 IRQ_TYPE_NONE>,
|
||||
<GIC_SPI 130 IRQ_TYPE_NONE>;
|
||||
interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
|
||||
brcm,pcie-msi-inten;
|
||||
};
|
||||
};
|
||||
@@ -533,7 +533,7 @@
|
||||
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-map-mask = <0 0 0 0>;
|
||||
interrupt-map = <0 0 0 0 &gic GIC_SPI 137 IRQ_TYPE_NONE>;
|
||||
interrupt-map = <0 0 0 0 &gic GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
||||
linux,pci-domain = <1>;
|
||||
|
||||
@@ -556,10 +556,10 @@
|
||||
compatible = "brcm,iproc-msi";
|
||||
msi-controller;
|
||||
interrupt-parent = <&gic>;
|
||||
interrupts = <GIC_SPI 133 IRQ_TYPE_NONE>,
|
||||
<GIC_SPI 134 IRQ_TYPE_NONE>,
|
||||
<GIC_SPI 135 IRQ_TYPE_NONE>,
|
||||
<GIC_SPI 136 IRQ_TYPE_NONE>;
|
||||
interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
|
||||
brcm,pcie-msi-inten;
|
||||
};
|
||||
};
|
||||
@@ -570,7 +570,7 @@
|
||||
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-map-mask = <0 0 0 0>;
|
||||
interrupt-map = <0 0 0 0 &gic GIC_SPI 143 IRQ_TYPE_NONE>;
|
||||
interrupt-map = <0 0 0 0 &gic GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
||||
linux,pci-domain = <2>;
|
||||
|
||||
@@ -593,10 +593,10 @@
|
||||
compatible = "brcm,iproc-msi";
|
||||
msi-controller;
|
||||
interrupt-parent = <&gic>;
|
||||
interrupts = <GIC_SPI 139 IRQ_TYPE_NONE>,
|
||||
<GIC_SPI 140 IRQ_TYPE_NONE>,
|
||||
<GIC_SPI 141 IRQ_TYPE_NONE>,
|
||||
<GIC_SPI 142 IRQ_TYPE_NONE>;
|
||||
interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
|
||||
brcm,pcie-msi-inten;
|
||||
};
|
||||
};
|
||||
|
||||
@@ -365,7 +365,7 @@
|
||||
i2c0: i2c@18009000 {
|
||||
compatible = "brcm,iproc-i2c";
|
||||
reg = <0x18009000 0x50>;
|
||||
interrupts = <GIC_SPI 121 IRQ_TYPE_NONE>;
|
||||
interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
clock-frequency = <100000>;
|
||||
|
||||
@@ -549,11 +549,7 @@
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
reg = <0x226000 0x1000>;
|
||||
interrupts = <42 IRQ_TYPE_EDGE_BOTH
|
||||
43 IRQ_TYPE_EDGE_BOTH 44 IRQ_TYPE_EDGE_BOTH
|
||||
45 IRQ_TYPE_EDGE_BOTH 46 IRQ_TYPE_EDGE_BOTH
|
||||
47 IRQ_TYPE_EDGE_BOTH 48 IRQ_TYPE_EDGE_BOTH
|
||||
49 IRQ_TYPE_EDGE_BOTH 50 IRQ_TYPE_EDGE_BOTH>;
|
||||
interrupts = <42 43 44 45 46 47 48 49 50>;
|
||||
ti,ngpio = <144>;
|
||||
ti,davinci-gpio-unbanked = <0>;
|
||||
status = "disabled";
|
||||
|
||||
@@ -90,7 +90,7 @@
|
||||
clocks = <&clks IMX6Q_CLK_ECSPI5>,
|
||||
<&clks IMX6Q_CLK_ECSPI5>;
|
||||
clock-names = "ipg", "per";
|
||||
dmas = <&sdma 11 7 1>, <&sdma 12 7 2>;
|
||||
dmas = <&sdma 11 8 1>, <&sdma 12 8 2>;
|
||||
dma-names = "rx", "tx";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
@@ -1344,7 +1344,7 @@
|
||||
ranges = <0x81000000 0 0 0x08f80000 0 0x00010000 /* downstream I/O */
|
||||
0x82000000 0 0x08000000 0x08000000 0 0x00f00000>; /* non-prefetchable memory */
|
||||
num-lanes = <1>;
|
||||
interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "msi";
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-map-mask = <0 0 0 0x7>;
|
||||
|
||||
Some files were not shown because too many files have changed in this diff Show More
Reference in New Issue
Block a user