Fix an obscure AB-BA deadlock in get_sb_bdev().
When a superblock is mounted more than once get_sb_bdev() calls
close_bdev_exclusive() to drop the extra bdev reference while holding
s_umount. However, sb->s_umount nests inside bd_mutex during
__invalidate_device() and close_bdev_exclusive() acquires bd_mutex during
blkdev_put(); thus creating an AB-BA deadlock.
This condition doesn't trigger frequently. For this condition to be
visible to lockdep, the filesystem must occupy the whole device (as
__invalidate_device() only grabs bd_mutex for the whole device), the FS
must be mounted more than once and partition rescan should be issued while
the FS is still mounted.
Fix it by dropping s_umount over close_bdev_exclusive().
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Ciprian Docan <docan@eden.rutgers.edu>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Commit 991ea75c (drm: use workqueue instead of slow-work), which made
drm to use wq instead of slow-work, didn't account for the return
value difference between delayed_slow_work_enqueue() and
queue_delayed_work(). The former returns 0 on success and -errno on
failures while the latter never fails and only uses the return value
to indicate whether the work was already pending or not.
This misconversion triggered spurious error messages. Remove the now
unnecessary return value check and error message.
Markus: caught another incorrect conversion in drm_kms_helper_poll_enable()
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Tested-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: David Airlie <airlied@linux.ie>
Cc: dri-devel@lists.freedesktop.org
Commit 6ee0578b (workqueue: mark init_workqueues as early_initcall)
made workqueue SMP initialization depend on workqueue_cpu_callback(),
which however was registered as hotcpu_notifier() and didn't get
called if CONFIG_HOTPLUG_CPU is not set. This made gcwqs on non-boot
CPUs not create their initial workers leading to boot failures. Fix
it by making it a cpu_notifier.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-and-bisected-by: walt <w41ter@gmail.com>
Tested-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Make the following changes to prepare for NCQ command completion
update. Changes made by this patch don't cause any functional
difference.
* sata_fsl_host_intr(): rename the local variable qc_active to
done_mask as that's what it is.
* mv_process_crpb_response(): restructure if clause for easier update.
* nv_adma_interrupt(): drop unnecessary error variable.
* nv_swncq_sdbfis(): drop unnecessary nr_done and return 0 on success.
Typo fix.
* nv_swncq_dmafis(): drop unused return value and return void.
* nv_swncq_host_interrupt(): drop unnecessary return value handling.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ashish Kalra <ashish.kalra@freescale.com>
Cc: Saeed Bishara <saeed@marvell.com>
Cc: Mark Lord <liml@rtr.ca>
Cc: Robert Hancock <hancockr@shaw.ca>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
SIDPR window registers are shared across ports and as each access is
done in two steps, accesses to different ports under EH may race.
This primarily is caused by incorrect host locking in EH context and
should be fixed by defining locking requirements for each EH operation
which can be used during EH and enforcing them but for now work around
the problem by adding a dedicated SIDPR lock and grabbing it for each
SIDPR access.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Mark Knecht <markknecht@gmail.com>
Reported-by: Paul Check <paul@thechecks.ca>
Cc: stable@kernel.org
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Commit 1529c69adc (ata_generic: implement ATA_GEN_* flags and force
enable DMA on MBP 7,1) implemented ATA_GEN_FORCE_DMA for forcing DMA
mode and applied it to CENATEK but forgot to remove the original hard
coded logic. This is removal of redundant logic and doesn't affect
correctness.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
for_each_*cwq_cpu() are similar to regular CPU iterators except that
it also considers the pseudo CPU number used for unbound workqueues.
Explain them.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
MSI delivery from on-board ahci controller doesn't work on K8M800. At
this point, it's unclear whether the culprit is with the ahci
controller or the host bridge. Given the track record and considering
the rather minimal impact of MSI, disabling it seems reasonable.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Rainer Hurtado Navarro <publio.escipion.el.africano@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Implicit slab.h inclusion via percpu.h is about to go away. Make sure
gfp.h or slab.h is included as necessary.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Eric Paris <eparis@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
Replace vhost_workqueue with per-vhost kthread. Other than callback
argument change from struct work_struct * to struct vhost_work *,
there's no visible change to vhost_poll_*() interface.
This conversion is to make each vhost use a dedicated kthread so that
resource control via cgroup can be applied.
Partially based on Sridhar Samudrala's patch.
* Updated to use sub structure vhost_work instead of directly using
vhost_poll at Michael's suggestion.
* Added flusher wake_up() optimization at Michael's suggestion.
Changes by MST:
* Converted atomics/barrier use to a spinlock.
* Create thread on SET_OWNER
* Fix flushing
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Sridhar Samudrala <samudrala.sridhar@gmail.com>
Commit 8b8edefa (fscache: convert object to use workqueue instead of
slow-work) made fscache_exit() call unregister_sysctl_table()
unconditionally breaking build when sysctl is disabled. Fix it by
putting it inside CONFIG_SYSCTL.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: David Howells <dhowells@redhat.com>
Workqueue can now handle high concurrency. Convert gfs to use
workqueue instead of slow-work.
* Steven pointed out that recovery path might be run from allocation
path and thus requires forward progress guarantee without memory
allocation. Create and use gfs_recovery_wq with rescuer. Please
note that forward progress wasn't guaranteed with slow-work.
* Updated to use non-reentrant workqueue.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
Workqueue can now handle high concurrency. Convert drm_crtc_helper to
use system_nrt_wq instead of slow-work. The conversion is mostly
straight forward. One difference is that drm_helper_hpd_irq_event()
no longer blocks and can be called from any context.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: David Airlie <airlied@linux.ie>
Cc: dri-devel@lists.freedesktop.org
Workqueue can now handle high concurrency. Use system_nrt_wq
instead of slow-work.
* Updated is_valid_oplock_break() to not call cifs_oplock_break_put()
as advised by Steve French. It might cause deadlock. Instead,
reference is increased after queueing succeeded and
cifs_oplock_break() briefly grabs GlobalSMBSeslock before putting
the cfile to make sure it doesn't put before the matching get is
finished.
* Anton Blanchard reported that cifs conversion was using now gone
system_single_wq. Use system_nrt_wq which provides non-reentrance
guarantee which is enough and much better.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Steve French <sfrench@samba.org>
Cc: Anton Blanchard <anton@samba.org>
Make fscache operation to use only workqueue instead of combination of
workqueue and slow-work. FSCACHE_OP_SLOW is dropped and
FSCACHE_OP_FAST is renamed to FSCACHE_OP_ASYNC and uses newly added
fscache_op_wq workqueue to execute op->processor().
fscache_operation_init_slow() is dropped and fscache_operation_init()
now takes @processor argument directly.
* Unbound workqueue is used.
* fscache_retrieval_work() is no longer necessary as OP_ASYNC now does
the equivalent thing.
* sysctl fscache.operation_max_active added to control concurrency.
The default value is nr_cpus clamped between 2 and
WQ_UNBOUND_MAX_ACTIVE.
* debugfs support is dropped for now. Tracing API based debug
facility is planned to be added.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: David Howells <dhowells@redhat.com>
Make fscache object state transition callbacks use workqueue instead
of slow-work. New dedicated unbound CPU workqueue fscache_object_wq
is created. get/put callbacks are renamed and modified to take
@object and called directly from the enqueue wrapper and the work
function. While at it, make all open coded instances of get/put to
use fscache_get/put_object().
* Unbound workqueue is used.
* work_busy() output is printed instead of slow-work flags in object
debugging outputs. They mean basically the same thing bit-for-bit.
* sysctl fscache.object_max_active added to control concurrency. The
default value is nr_cpus clamped between 4 and
WQ_UNBOUND_MAX_ACTIVE.
* slow_work_sleep_till_thread_needed() is replaced with fscache
private implementation fscache_object_sleep_till_congested() which
waits on fscache_object_wq congestion.
* debugfs support is dropped for now. Tracing API based debug
facility is planned to be added.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: David Howells <dhowells@redhat.com>
Once a work starts execution, its data contains the cpu number it was
on instead of pointing to cwq. This is added by commit 7a22ad75
(workqueue: carry cpu number in work data once execution starts) to
reliably determine the work was last on even if the workqueue itself
was destroyed inbetween.
Whether data points to a cwq or contains a cpu number was
distinguished by comparing the value against PAGE_OFFSET. The
assumption was that a cpu number should be below PAGE_OFFSET while a
pointer to cwq should be above it. However, on architectures which
use separate address spaces for user and kernel spaces, this doesn't
hold as PAGE_OFFSET is zero.
Fix it by using an explicit flag, WORK_STRUCT_CWQ, to mark what the
data field contains. If the flag is set, it's pointing to a cwq;
otherwise, it contains a cpu number.
Reported on s390 and microblaze during linux-next testing.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Sachin Sant <sachinp@in.ibm.com>
Reported-by: Michal Simek <michal.simek@petalogix.com>
Reported-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Tested-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Tested-by: Michal Simek <monstr@monstr.eu>
All cpumasks are assumed to have cpu 0 permanently set on UP, so it
can't be used to signify whether there's something to be done for the
CPU. workqueue was using cpumask to track which CPU requested rescuer
assistance and this led rescuer thread to think there always are
pending mayday requests on UP, which resulted in infinite busy loops.
This patch fixes the problem by introducing mayday_mask_t and
associated helpers which wrap cpumask on SMP and emulates its behavior
using bitops and unsigned long on UP.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Commit f3421797 (workqueue: implement unbound workqueue) incorrectly
tested CONFIG_SMP as part of a C expression in alloc/free_cwqs(). As
CONFIG_SMP is not defined in UP, this breaks build. Fix it by using
Found during linux-next build test.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
maybe_create_worker() mismanaged locking when worker creation fails
and it has to retry. Fix locking and simplify lock manipulation.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Yong Zhang <yong.zhang@windriver.com>
WQ_SINGLE_CPU combined with @max_active of 1 is used to achieve full
ordering among works queued to a workqueue. The same can be achieved
using WQ_UNBOUND as unbound workqueues always use the gcwq for
WORK_CPU_UNBOUND. As @max_active is always one and benefits from cpu
locality isn't accessible anyway, serving them with unbound workqueues
should be fine.
Drop WQ_SINGLE_CPU support and use WQ_UNBOUND instead. Note that most
single thread workqueue users will be converted to use multithread or
non-reentrant instead and only the ones which require strict ordering
will keep using WQ_UNBOUND + @max_active of 1.
Signed-off-by: Tejun Heo <tj@kernel.org>
This patch implements unbound workqueue which can be specified with
WQ_UNBOUND flag on creation. An unbound workqueue has the following
properties.
* It uses a dedicated gcwq with a pseudo CPU number WORK_CPU_UNBOUND.
This gcwq is always online and disassociated.
* Workers are not bound to any CPU and not concurrency managed. Works
are dispatched to workers as soon as possible and the only applied
limitation is @max_active. IOW, all unbound workqeueues are
implicitly high priority.
Unbound workqueues can be used as simple execution context provider.
Contexts unbound to any cpu are served as soon as possible.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: David Howells <dhowells@redhat.com>
In preparation of WQ_UNBOUND addition, make the following changes.
* Add WORK_CPU_* constants for pseudo cpu id numbers used (currently
only WORK_CPU_NONE) and use them instead of NR_CPUS. This is to
allow another pseudo cpu id for unbound cpu.
* Reorder WQ_* flags.
* Make workqueue_struct->cpu_wq a union which contains a percpu
pointer, regular pointer and an unsigned long value and use
kzalloc/kfree() in UP allocation path. This will be used to
implement unbound workqueues which will use only one cwq on SMPs.
* Move alloc_cwqs() allocation after initialization of wq fields, so
that alloc_cwqs() has access to wq->flags.
* Trivial relocation of wq local variables in freeze functions.
These changes don't cause any functional change.
Signed-off-by: Tejun Heo <tj@kernel.org>
libata has two concurrency related limitations.
a. ata_wq which is used for polling PIO has single thread per CPU. If
there are multiple devices doing polling PIO on the same CPU, they
can't be executed simultaneously.
b. ata_aux_wq which is used for SCSI probing has single thread. In
cases where SCSI probing is stalled for extended period of time
which is possible for ATAPI devices, this will stall all probing.
#a is solved by increasing maximum concurrency of ata_wq. Please note
that polling PIO might be used under allocation path and thus needs to
be served by a separate wq with a rescuer.
#b is solved by using the default wq instead and achieving exclusion
via per-port mutex.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Jeff Garzik <jgarzik@pobox.com>
When there's no pending work to do, worker_thread() goes back to sleep
after waking up without checking whether worker management is
necessary. This means that idle worker exit requests can be ignored
if the gcwq stays empty.
Fix it by making worker_thread() always check whether worker
management is necessary before going to sleep.
Signed-off-by: Tejun Heo <tj@kernel.org>
get_work_gcwq() was incorrectly triggering BUG_ON() if cpu number is
equal to or higher than num_possible_cpus() instead of nr_cpu_ids.
Fix it.
Signed-off-by: Tejun Heo <tj@kernel.org>
When one flusher is cascading to the next flusher, it first sets
wq->first_flusher to the next one and sets up the next flush cycle.
If there's nothing to do for the next cycle, it clears
wq->flush_flusher and proceeds to the one after that.
If the woken up flusher checks wq->first_flusher before it gets
cleared, it will incorrectly assume the role of the first flusher,
which triggers BUG_ON() sanity check.
Fix it by checking wq->first_flusher again after grabbing the mutex.
Signed-off-by: Tejun Heo <tj@kernel.org>
worker_set/clr_flags() assume that if none of NOT_RUNNING flags is set
the worker must be contributing to nr_running which is only true if
the worker is actually running.
As when called from self, it is guaranteed that the worker is running,
those functions can be safely used from the worker itself and they
aren't necessary from other places anyway. Make the following changes
to fix the bug.
* Make worker_set/clr_flags() whine if not called from self.
* Convert all places which called those functions from other tasks to
manipulate flags directly.
* Make trustee_thread() directly clear nr_running after setting
WORKER_ROGUE on all workers. This is the only place where
nr_running manipulation is necessary outside of workers themselves.
* While at it, add sanity check for nr_running in worker_enter_idle().
Signed-off-by: Tejun Heo <tj@kernel.org>
IDE mode of MCP89 on MBP 7,1 doesn't set DMA enable bits in the BMDMA
status register. Make the following changes to work around the problem.
* Instead of using hard coded 1 in id->driver_data as class code
match, use ATA_GEN_CLASS_MATCH and carry the matched id in
host->private_data.
* Instead of matching PCI_VENDOR_ID_CENATEK, use ATA_GEN_FORCE_DMA
flag in id instead.
* Add ATA_GEN_FORCE_DMA to the id entry of MBP 7,1.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Peer Chen <pchen@nvidia.com>
Cc: stable@kernel.org
Reported-by: Anders Østhus <grapz666@gmail.com>
Reported-by: Andreas Graf <andreas_graf@csgraf.de>
Reported-by: Benoit Gschwind <gschwind@gnu-log.net>
Reported-by: Damien Cassou <damien.cassou@gmail.com>
Reported-by: tixetsal@juno.com
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
This patch implements cpu intensive workqueue which can be specified
with WQ_CPU_INTENSIVE flag on creation. Works queued to a cpu
intensive workqueue don't participate in concurrency management. IOW,
it doesn't contribute to gcwq->nr_running and thus doesn't delay
excution of other works.
Note that although cpu intensive works won't delay other works, they
can be delayed by other works. Combine with WQ_HIGHPRI to avoid being
delayed by other works too.
As the name suggests this is useful when using workqueue for cpu
intensive works. Workers executing cpu intensive works are not
considered for workqueue concurrency management and left for the
scheduler to manage.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
This patch implements high priority workqueue which can be specified
with WQ_HIGHPRI flag on creation. A high priority workqueue has the
following properties.
* A work queued to it is queued at the head of the worklist of the
respective gcwq after other highpri works, while normal works are
always appended at the end.
* As long as there are highpri works on gcwq->worklist,
[__]need_more_worker() remains %true and process_one_work() wakes up
another worker before it start executing a work.
The above two properties guarantee that works queued to high priority
workqueues are dispatched to workers and start execution as soon as
possible regardless of the state of other works.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Implement the following utility APIs.
workqueue_set_max_active() : adjust max_active of a wq
workqueue_congested() : test whether a wq is contested
work_cpu() : determine the last / current cpu of a work
work_busy() : query whether a work is busy
* Anton Blanchard fixed missing ret initialization in work_busy().
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Anton Blanchard <anton@samba.org>
This patch makes changes to make new workqueue features available to
its users.
* Now that workqueue is more featureful, there should be a public
workqueue creation function which takes paramters to control them.
Rename __create_workqueue() to alloc_workqueue() and make 0
max_active mean WQ_DFL_ACTIVE. In the long run, all
create_workqueue_*() will be converted over to alloc_workqueue().
* To further unify access interface, rename keventd_wq to system_wq
and export it.
* Add system_long_wq and system_nrt_wq. The former is to host long
running works separately (so that flush_scheduled_work() dosen't
take so long) and the latter guarantees any queued work item is
never executed in parallel by multiple CPUs. These will be used by
future patches to update workqueue users.
Signed-off-by: Tejun Heo <tj@kernel.org>
Define WQ_MAX_ACTIVE and create keventd with max_active set to half of
it which means that keventd now can process upto WQ_MAX_ACTIVE / 2 - 1
works concurrently. Unless some combination can result in dependency
loop longer than max_active, deadlock won't happen and thus it's
unnecessary to check whether current_is_keventd() before trying to
schedule a work. Kill current_is_keventd().
(Lockdep annotations are broken. We need lock_map_acquire_read_norecurse())
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Instead of creating a worker for each cwq and putting it into the
shared pool, manage per-cpu workers dynamically.
Works aren't supposed to be cpu cycle hogs and maintaining just enough
concurrency to prevent work processing from stalling due to lack of
processing context is optimal. gcwq keeps the number of concurrent
active workers to minimum but no less. As long as there's one or more
running workers on the cpu, no new worker is scheduled so that works
can be processed in batch as much as possible but when the last
running worker blocks, gcwq immediately schedules new worker so that
the cpu doesn't sit idle while there are works to be processed.
gcwq always keeps at least single idle worker around. When a new
worker is necessary and the worker is the last idle one, the worker
assumes the role of "manager" and manages the worker pool -
ie. creates another worker. Forward-progress is guaranteed by having
dedicated rescue workers for workqueues which may be necessary while
creating a new worker. When the manager is having problem creating a
new worker, mayday timer activates and rescue workers are summoned to
the cpu and execute works which might be necessary to create new
workers.
Trustee is expanded to serve the role of manager while a CPU is being
taken down and stays down. As no new works are supposed to be queued
on a dead cpu, it just needs to drain all the existing ones. Trustee
continues to try to create new workers and summon rescuers as long as
there are pending works. If the CPU is brought back up while the
trustee is still trying to drain the gcwq from the previous offlining,
the trustee will kill all idles ones and tell workers which are still
busy to rebind to the cpu, and pass control over to gcwq which assumes
the manager role as necessary.
Concurrency managed worker pool reduces the number of workers
drastically. Only workers which are necessary to keep the processing
going are created and kept. Also, it reduces cache footprint by
avoiding unnecessarily switching contexts between different workers.
Please note that this patch does not increase max_active of any
workqueue. All workqueues can still only process one work per cpu.
Signed-off-by: Tejun Heo <tj@kernel.org>
Implement worker_{set|clr}_flags() to manipulate worker flags. These
are currently simple wrappers but logics to track the current worker
state and the current level of concurrency will be added.
Signed-off-by: Tejun Heo <tj@kernel.org>
Use gcwq->worklist instead of cwq->worklist and break the strict
association between a cwq and its worker. All works queued on a cpu
are queued on gcwq->worklist and processed by any available worker on
the gcwq.
As there no longer is strict association between a cwq and its worker,
whether a work is executing can now only be determined by calling
[__]find_worker_executing_work().
After this change, the only association between a cwq and its worker
is that a cwq puts a worker into shared worker pool on creation and
kills it on destruction. As all workqueues are still limited to
max_active of one, this means that there are always at least as many
workers as active works and thus there's no danger for deadlock.
The break of strong association between cwqs and workers requires
somewhat clumsy changes to current_is_keventd() and
destroy_workqueue(). Dynamic worker pool management will remove both
clumsy changes. current_is_keventd() won't be necessary at all as the
only reason it exists is to avoid queueing a work from a work which
will be allowed just fine. The clumsy part of destroy_workqueue() is
added because a worker can only be destroyed while idle and there's no
guarantee a worker is idle when its wq is going down. With dynamic
pool management, workers are not associated with workqueues at all and
only idle ones will be submitted to destroy_workqueue() so the code
won't be necessary anymore.
Signed-off-by: Tejun Heo <tj@kernel.org>
With gcwq managing all the workers and work->data pointing to the last
gcwq it was on, non-reentrance can be easily implemented by checking
whether the work is still running on the previous gcwq on queueing.
Implement it.
Signed-off-by: Tejun Heo <tj@kernel.org>
To implement non-reentrant workqueue, the last gcwq a work was
executed on must be reliably obtainable as long as the work structure
is valid even if the previous workqueue has been destroyed.
To achieve this, work->data will be overloaded to carry the last cpu
number once execution starts so that the previous gcwq can be located
reliably. This means that cwq can't be obtained from work after
execution starts but only gcwq.
Implement set_work_{cwq|cpu}(), get_work_[g]cwq() and
clear_work_data() to set work data to the cpu number when starting
execution, access the overloaded work data and clear it after
cancellation.
queue_delayed_work_on() is updated to preserve the last cpu while
in-flight in timer and other callers which depended on getting cwq
from work after execution starts are converted to depend on gcwq
instead.
* Anton Blanchard fixed compile error on powerpc due to missing
linux/threads.h include.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Anton Blanchard <anton@samba.org>
Now that all the workers are tracked by gcwq, we can find which worker
is executing a work from gcwq. Implement find_worker_executing_work()
and make worker track its current_cwq so that we can find things the
other way around. This will be used to implement non-reentrant wqs.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reimplement st (single thread) workqueue so that it's friendly to
shared worker pool. It was originally implemented by confining st
workqueues to use cwq of a fixed cpu and always having a worker for
the cpu. This implementation isn't very friendly to shared worker
pool and suboptimal in that it ends up crossing cpu boundaries often.
Reimplement st workqueue using dynamic single cpu binding and
cwq->limit. WQ_SINGLE_THREAD is replaced with WQ_SINGLE_CPU. In a
single cpu workqueue, at most single cwq is bound to the wq at any
given time. Arbitration is done using atomic accesses to
wq->single_cpu when queueing a work. Once bound, the binding stays
till the workqueue is drained.
Note that the binding is never broken while a workqueue is frozen.
This is because idle cwqs may have works waiting in delayed_works
queue while frozen. On thaw, the cwq is restarted if there are any
delayed works or unbound otherwise.
When combined with max_active limit of 1, single cpu workqueue has
exactly the same execution properties as the original single thread
workqueue while allowing sharing of per-cpu workers.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reimplement CPU hotplugging support using trustee thread. On CPU
down, a trustee thread is created and each step of CPU down is
executed by the trustee and workqueue_cpu_callback() simply drives and
waits for trustee state transitions.
CPU down operation no longer waits for works to be drained but trustee
sticks around till all pending works have been completed. If CPU is
brought back up while works are still draining,
workqueue_cpu_callback() tells trustee to step down and tell workers
to rebind to the cpu.
As it's difficult to tell whether cwqs are empty if it's freezing or
frozen, trustee doesn't consider draining to be complete while a gcwq
is freezing or frozen (tracked by new GCWQ_FREEZING flag). Also,
workers which get unbound from their cpu are marked with WORKER_ROGUE.
Trustee based implementation doesn't bring any new feature at this
point but it will be used to manage worker pool when dynamic shared
worker pool is implemented.
Signed-off-by: Tejun Heo <tj@kernel.org>
Implement worker states. After created, a worker is STARTED. While a
worker isn't processing a work, it's IDLE and chained on
gcwq->idle_list. While processing a work, a worker is BUSY and
chained on gcwq->busy_hash. Also, gcwq now counts the number of all
workers and idle ones.
worker_thread() is restructured to reflect state transitions.
cwq->more_work is removed and waking up a worker makes it check for
events. A worker is killed by setting DIE flag while it's IDLE and
waking it up.
This gives gcwq better visibility of what's going on and allows it to
find out whether a work is executing quickly which is necessary to
have multiple workers processing the same cwq.
Signed-off-by: Tejun Heo <tj@kernel.org>
There is one gcwq (global cwq) per each cpu and all cwqs on an cpu
point to it. A gcwq contains a lock to be used by all cwqs on the cpu
and an ida to give IDs to workers belonging to the cpu.
This patch introduces gcwq, moves worker_ida into gcwq and make all
cwqs on the same cpu use the cpu's gcwq->lock instead of separate
locks. gcwq->ida is now protected by gcwq->lock too.
Signed-off-by: Tejun Heo <tj@kernel.org>
Currently, workqueue freezing is implemented by marking the worker
freezeable and calling try_to_freeze() from dispatch loop.
Reimplement it using cwq->limit so that the workqueue is frozen
instead of the worker.
* workqueue_struct->saved_max_active is added which stores the
specified max_active on initialization.
* On freeze, all cwq->max_active's are quenched to zero. Freezing is
complete when nr_active on all cwqs reach zero.
* On thaw, all cwq->max_active's are restored to wq->saved_max_active
and the worklist is repopulated.
This new implementation allows having single shared pool of workers
per cpu.
Signed-off-by: Tejun Heo <tj@kernel.org>
Add cwq->nr_active, cwq->max_active and cwq->delayed_work. nr_active
counts the number of active works per cwq. A work is active if it's
flushable (colored) and is on cwq's worklist. If nr_active reaches
max_active, new works are queued on cwq->delayed_work and activated
later as works on the cwq complete and decrement nr_active.
cwq->max_active can be specified via the new @max_active parameter to
__create_workqueue() and is set to 1 for all workqueues for now. As
each cwq has only single worker now, this double queueing doesn't
cause any behavior difference visible to its users.
This will be used to reimplement freeze/thaw and implement shared
worker pool.
Signed-off-by: Tejun Heo <tj@kernel.org>
A work is linked to the next one by having WORK_STRUCT_LINKED bit set
and these links can be chained. When a linked work is dispatched to a
worker, all linked works are dispatched to the worker's newly added
->scheduled queue and processed back-to-back.
Currently, as there's only single worker per cwq, having linked works
doesn't make any visible behavior difference. This change is to
prepare for multiple shared workers per cpu.
Signed-off-by: Tejun Heo <tj@kernel.org>
Separate out worker thread related information to struct worker from
struct cpu_workqueue_struct and implement helper functions to deal
with the new struct worker. The only change which is visible outside
is that now workqueue worker are all named "kworker/CPUID:WORKERID"
where WORKERID is allocated from per-cpu ida.
This is in preparation of concurrency managed workqueue where shared
multiple workers would be available per cpu.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reimplement workqueue flushing using color coded works. wq has the
current work color which is painted on the works being issued via
cwqs. Flushing a workqueue is achieved by advancing the current work
colors of cwqs and waiting for all the works which have any of the
previous colors to drain.
Currently there are 16 possible colors, one is reserved for no color
and 15 colors are useable allowing 14 concurrent flushes. When color
space gets full, flush attempts are batched up and processed together
when color frees up, so even with many concurrent flushers, the new
implementation won't build up huge queue of flushers which has to be
processed one after another.
Only works which are queued via __queue_work() are colored. Works
which are directly put on queue using insert_work() use NO_COLOR and
don't participate in workqueue flushing. Currently only works used
for work-specific flush fall in this category.
This new implementation leaves only cleanup_workqueue_thread() as the
user of flush_cpu_workqueue(). Just make its users use
flush_workqueue() and kthread_stop() directly and kill
cleanup_workqueue_thread(). As workqueue flushing doesn't use barrier
request anymore, the comment describing the complex synchronization
around it in cleanup_workqueue_thread() is removed together with the
function.
This new implementation is to allow having and sharing multiple
workers per cpu.
Please note that one more bit is reserved for a future work flag by
this patch. This is to avoid shifting bits and updating comments
later.
Signed-off-by: Tejun Heo <tj@kernel.org>
work->data field is used for two purposes. It points to cwq it's
queued on and the lower bits are used for flags. Currently, two bits
are reserved which is always safe as 4 byte alignment is guaranteed on
every architecture. However, future changes will need more flag bits.
On SMP, the percpu allocator is capable of honoring larger alignment
(there are other users which depend on it) and larger alignment works
just fine. On UP, percpu allocator is a thin wrapper around
kzalloc/kfree() and don't honor alignment request.
This patch introduces WORK_STRUCT_FLAG_BITS and implements
alloc/free_cwqs() which guarantees max(1 << WORK_STRUCT_FLAG_BITS,
__alignof__(unsigned long long) alignment both on SMP and UP. On SMP,
simply wrapping percpu allocator is enough. On UP, extra space is
allocated so that cwq can be aligned and the original pointer can be
stored after it which is used in the free path.
* Alignment problem on UP is reported by Michal Simek.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Reported-by: Michal Simek <michal.simek@petalogix.com>
Worker management is about to be overhauled. Simplify things by
removing cpu_populated_map, creating workers for all possible cpus and
making single threaded workqueues behave more like multi threaded
ones.
After this patch, all cwqs are always initialized, all workqueues are
linked on the workqueues list and workers for all possibles cpus
always exist. This also makes CPU hotplug support simpler - checking
->cpus_allowed before processing works in worker_thread() and flushing
cwqs on CPU_POST_DEAD are enough.
While at it, make get_cwq() always return the cwq for the specified
cpu, add target_cwq() for cases where single thread distinction is
necessary and drop all direct usage of per_cpu_ptr() on wq->cpu_wq.
Signed-off-by: Tejun Heo <tj@kernel.org>
Strip tracing code from workqueue and remove workqueue tracing. This
is temporary measure till concurrency managed workqueue is complete.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Work flags are about to see more traditional mask handling. Define
WORK_STRUCT_*_BIT as the bit position constant and redefine
WORK_STRUCT_* as bit masks. Also, make WORK_STRUCT_STATIC_* flags
conditional
While at it, re-define these constants as enums and use
WORK_STRUCT_STATIC instead of hard-coding 2 in
WORK_DATA_STATIC_INIT().
Signed-off-by: Tejun Heo <tj@kernel.org>
Currently, __create_workqueue_key() takes @singlethread and
@freezeable paramters and store them separately in workqueue_struct.
Merge them into a single flags parameter and field and use
WQ_FREEZEABLE and WQ_SINGLE_THREAD.
Signed-off-by: Tejun Heo <tj@kernel.org>
Make the following updates in preparation of concurrency managed
workqueue. None of these changes causes any visible behavior
difference.
* Add comments and adjust indentations to data structures and several
functions.
* Rename wq_per_cpu() to get_cwq() and swap the position of two
parameters for consistency. Convert a direct per_cpu_ptr() access
to wq->cpu_wq to get_cwq().
* Add work_static() and Update set_wq_data() such that it sets the
flags part to WORK_STRUCT_PENDING | WORK_STRUCT_STATIC if static |
@extra_flags.
* Move santiy check on work->entry emptiness from queue_work_on() to
__queue_work() which all queueing paths share.
* Make __queue_work() take @cpu and @wq instead of @cwq.
* Restructure flush_work() and __create_workqueue_key() to make them
easier to modify.
Signed-off-by: Tejun Heo <tj@kernel.org>
With stop_machine() converted to use cpu_stop, RT workqueue doesn't
have any user left. Kill RT workqueue support.
Signed-off-by: Tejun Heo <tj@kernel.org>
ACPI works need to be executed on cpu0 and acpi/osl.c achieves this by
creating singlethread workqueue and then binding it to cpu0 from a
work which is quite unorthodox. Make it create regular workqueues and
use queue_work_on() instead. This is in preparation of concurrency
managed workqueue and the extra workers won't be a problem after it's
implemented.
Signed-off-by: Tejun Heo <tj@kernel.org>
Implement kthread_data() which takes @task pointing to a kthread and
returns @data specified when creating the kthread. The caller is
responsible for ensuring the validity of @task when calling this
function.
Signed-off-by: Tejun Heo <tj@kernel.org>
Upcoming workqueue updates will no longer guarantee fixed workqueue to
worker kthread association, so giving RT priority to the irq worker
won't work. Use kthread_worker which guarantees specific kthread
association instead. This also makes setting the priority cleaner.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Andy Walls <awalls@md.metrocast.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: ivtv-devel@ivtvdriver.org
Cc: linux-media@vger.kernel.org
Implement simple work processor for kthread. This is to ease using
kthread. Single thread workqueue used to be used for things like this
but workqueue won't guarantee fixed kthread association anymore to
enable worker sharing.
This can be used in cases where specific kthread association is
necessary, for example, when it should have RT priority or be assigned
to certain cgroup.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Implicit slab.h inclusion via percpu.h is about to go away. Make sure
gfp.h or slab.h is included as necessary.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Implicit slab.h inclusion via percpu.h is about to go away. Make sure
gfp.h or slab.h is included as necessary.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
This patch updates percpu allocator such that it can serve limited
amount of allocation before slab comes online. This is primarily to
allow slab to depend on working percpu allocator.
Two parameters, PERCPU_DYNAMIC_EARLY_SIZE and SLOTS, determine how
much memory space and allocation map slots are reserved. If this
reserved area is exhausted, WARN_ON_ONCE() will trigger and allocation
will fail till slab comes online.
The following changes are made to implement early alloc.
* pcpu_mem_alloc() now checks slab_is_available()
* Chunks are allocated using pcpu_mem_alloc()
* Init paths make sure ai->dyn_size is at least as large as
PERCPU_DYNAMIC_EARLY_SIZE.
* Initial alloc maps are allocated in __initdata and copied to
kmalloc'd areas once slab is online.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Christoph Lameter <cl@linux-foundation.org>
In pcpu_build_alloc_info() and pcpu_embed_first_chunk(), @dyn_size was
ssize_t, -1 meant auto-size, 0 forced 0 and positive meant minimum
size. There's no use case for forcing 0 and the upcoming early alloc
support always requires non-zero dynamic size. Make @dyn_size always
mean minimum dyn_size.
While at it, make pcpu_build_alloc_info() static which doesn't have
any external caller as suggested by David Rientjes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Commit 3a101d05 (sched: adjust when cpu_active and cpuset
configurations are updated during cpu on/offlining) added
hotplug notifiers marked with __cpuexit; however, ia64 drops
text in __cpuexit during link unlike x86.
This means that functions which are referenced during init but used
only for cpu hot unplugging afterwards shouldn't be marked with
__cpuexit. Drop __cpuexit from those functions.
Reported-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Tony Luck <tony.luck@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <4C1FDF5B.1040301@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
per_cpu_ptr_to_phys() determines whether the passed in @addr belongs
to the first_chunk or not by just matching the address against the
address range of the base unit (unit0, used by cpu0). When an adress
from another cpu was passed in, it will always determine that the
address doesn't belong to the first chunk even when it does. This
makes the function return a bogus physical address which may lead to
crash.
This problem was discovered by Cliff Wickman while investigating a
crash during kdump on a SGI UV system.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Cliff Wickman <cpw@sgi.com>
Tested-by: Cliff Wickman <cpw@sgi.com>
Cc: stable@kernel.org
Concurrency managed workqueue needs to know when workers are going to
sleep and waking up. Using these two hooks, cmwq keeps track of the
current concurrency level and throttles execution of new works if it's
too high and wakes up another worker from the sleep hook if it becomes
too low.
This patch introduces PF_WQ_WORKER to identify workqueue workers and
adds the following two hooks.
* wq_worker_waking_up(): called when a worker is woken up.
* wq_worker_sleeping(): called when a worker is going to sleep and may
return a pointer to a local task which should be woken up. The
returned task is woken up using try_to_wake_up_local() which is
simplified ttwu which is called under rq lock and can only wake up
local tasks.
Both hooks are currently defined as noop in kernel/workqueue_sched.h.
Later cmwq implementation will replace them with proper
implementation.
These hooks are hard coded as they'll always be enabled.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Ingo Molnar <mingo@elte.hu>
Factor ttwu_activate() and ttwu_woken_up() out of try_to_wake_up().
The factoring out doesn't affect try_to_wake_up() much
code-generation-wise. Depending on configuration options, it ends up
generating the same object code as before or slightly different one
due to different register assignment.
This is to help future implementation of try_to_wake_up_local().
Mike Galbraith suggested rename to ttwu_post_activation() from
ttwu_woken_up() and comment update in try_to_wake_up().
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Ingo Molnar <mingo@elte.hu>
Currently, when a cpu goes down, cpu_active is cleared before
CPU_DOWN_PREPARE starts and cpuset configuration is updated from a
default priority cpu notifier. When a cpu is coming up, it's set
before CPU_ONLINE but cpuset configuration again is updated from the
same cpu notifier.
For cpu notifiers, this presents an inconsistent state. Threads which
a CPU_DOWN_PREPARE notifier expects to be bound to the CPU can be
migrated to other cpus because the cpu is no more inactive.
Fix it by updating cpu_active in the highest priority cpu notifier and
cpuset configuration in the second highest when a cpu is coming up.
Down path is updated similarly. This guarantees that all other cpu
notifiers see consistent cpu_active and cpuset configuration.
cpuset_track_online_cpus() notifier is converted to
cpuset_update_active_cpus() which just updates the configuration and
now called from cpuset_cpu_[in]active() notifiers registered from
sched_init_smp(). If cpuset is disabled, cpuset_update_active_cpus()
degenerates into partition_sched_domains() making separate notifier
for !CONFIG_CPUSETS unnecessary.
This problem is triggered by cmwq. During CPU_DOWN_PREPARE, hotplug
callback creates a kthread and kthread_bind()s it to the target cpu,
and the thread is expected to run on that cpu.
* Ingo's test discovered __cpuinit/exit markups were incorrect.
Fixed.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Menage <menage@google.com>
Commit 96d60303fd (ahci: Turn off DMA engines when there's no device)
implemented stopping DMA engines on empty ports but it used single
sampling of status registers to determine device presence which led to
disabling of DMA engines on occupied ports. Do it after all EH
actions are complete using device presence state determined by EH.
This avoids spurious disabling of DMA engines and simplifies the code.
Signed-off-by: Tejun Heo <tj@kernel.org>
Tested-by: Marc Dionne <marc.c.dionne@gmail.com>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Robert Hancock <hancockrwd@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
JMB362 is a new variant of jmicron controller which is similar to
JMB360 but has two SATA ports instead of one. As there is no PATA
port, single function AHCI mode can be used as in JMB360. Add pci
quirk for JMB362.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Aries Lee <arieslee@jmicron.com>
Cc: stable@kernel.org
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Add Joseph Chan's explanation of the problem and workaround to the
VT6421 magic fix.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Joseph Chan <JosephChan@via.com.tw>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Implement ata_scsi_unlock_native_capacity() which will be called
through SCSI layer when block layer notices that partitions on a
device extend beyond the end of the device. It requests EH to unlock
HPA, waits for completion and returns the current device capacity.
This allows libata to unlock HPA on demand instead of having to decide
whether to unlock upfront. Unlocking on demand is safer than
unlocking by upfront because some BIOSes write private data to the
area beyond HPA limit. This was suggested by Ben Hutchings.
Signed-off-by: Tejun Heo <tj@kernel.org>
Suggested-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
After late HPA unlock, libata kept using the original capacity
ignoring the new larger native capacity. Enlarging device on the fly
doesn't cause any harm. Use the larger native capacity instead. This
will enable on-demand HPA unlocking.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Implement sd_unlock_native_capacity() method which calls into
hostt->unlock_native_capacity() if implemented. This will be invoked
by block layer if partitions extend beyond the end of the device and
can be used to implement, for example, on-demand ATA host protected
area unlocking.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
On mcp55, nIEN gets stuck once set and liteon blueray rom iHOS104-08
violates ATA specification and fails to set I on D2H Reg FIS if nIEN
is set when the command was issued. When the other party is following
the spec, both devices can work fine but when the two flaws are put
together, they can't talk to each other.
mcp55 has its own IRQ masking mechanism and there's no reason to mess
with nIEN in the first place. Fix it by dropping nIEN diddling from
nv_mcp55_freeze/thaw().
This was originally reported by Cengiz. Although Cengiz hasn't
verified the fix yet, I could reproduce this problem and verfiy the
fix. Even if Cengiz is experiencing different or additional problems,
this patch is needed.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Cengiz Günay <cgunay@emory.edu>
Cc: stable@kernel.org
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
vt6421 has problems talking to recent WD drives. It causes a lot of
transmission errors while high bandwidth transfer as reported in the
following bugzilla entry.
https://bugzilla.kernel.org/show_bug.cgi?id=15173
Joseph Chan provided the following fix. I don't have any idea what it
does but I can verify the issue is gone with the patch applied.
Signed-off-by: Tejun Heo <tj@kernel.org>
Originally-from: Joseph Chan <JosephChan@via.com.tw>
Reported-by: Jorrit Tijben <sjorrit@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Implicit slab.h inclusion via percpu.h is about to go away. Make sure
gfp.h or slab.h is included as necessary.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Add dump_id libata.force parameter. If specified, libata dumps full
IDENTIFY data during device configuration. This is to aid debugging.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Larry Baker <baker@usgs.gov>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
There are ATAPI devices which raise AN when hit by commands issued by
open(). This leads to infinite loop of AN -> MEDIA_CHANGE uevent ->
udev open() to check media -> AN.
Both ACS and SerialATA standards don't define in which case ATAPI
devices are supposed to raise or not raise AN. They both list media
insertion event as a possible use case for ATAPI ANs but there is no
clear description of what constitutes such events. As such, it seems
a bit too naive to export ANs directly to userland as MEDIA_CHANGE
events without further verification (which should behave similarly to
windows as it apparently is the only thing that some hardware vendors
are testing against).
This patch adds libata.atapi_an module parameter and disables ATAPI AN
by default for now.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Nick Bowler <nbowler@elliptictech.com>
Cc: David Zeuthen <david@fubar.dk>
Cc: stable@kernel.org
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Make BMDMA optional depending on new config variable CONFIG_ATA_BMDMA.
In Kconfig, drivers are grouped into five groups - non-SFF native, SFF
w/ custom DMA interface, SFF w/ BMDMA, PIO-only SFF, and generic
fallback / legacy ones. Kconfig and Makefile are reorganized
according to the groups and ordered alphabetically inside each group.
ata_ioports.bmdma_addr and ata_port.bmdma_prd[_dma] are put into
CONFIG_ATA_BMDMA, as are all bmdma related ops, variables and
functions.
This increase the binary size slightly when BMDMA is enabled but on
both native-only and PIO-only configurations the size is slightly
reduced. Either way, the size difference is insignificant. This
change is more meaningful to signify the separation between SFF and
BMDMA and as a tool to verify the separation.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Now that SFF and BMDMA are completely separate, sata_qstor and
pata_octeon_cf which inherit from ata_sff_port_ops don't need to worry
about BMDMA ops being called. Kill the dummy BMDMA ops.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Separate out ata_pci_bmdma_prepare_host() and ata_pci_bmdma_init_one()
from their SFF counterparts. SFF ones no longer try to initialize
BMDMA or set PCI master.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Separate out BMDMA irq handler from SFF irq handler. The misnamed
host_intr() functions are renamed to ata_sff_port_intr() and
ata_bmdma_port_intr(). Common parts are factored into
__ata_sff_port_intr() and __ata_sff_interrupt() and used by sff and
bmdma interrupt routines.
All BMDMA drivers now use ata_bmdma_interrupt() or
ata_bmdma_port_intr() while all non-BMDMA SFF ones use
ata_sff_interrupt() or ata_sff_port_intr().
For now, ata_pci_sff_init_one() uses ata_bmdma_interrupt() as it's
used by both SFF and BMDMA drivers.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
ata_sff_irq_clear() is BMDMA specific. Rename it to
ata_bmdma_irq_clear(), move it to ata_bmdma_port_ops and make
->sff_irq_clear() optional.
Note: ata_bmdma_irq_clear() is actually only needed by ata_piix and
possibly by sata_sil. This should be moved to respective low
level drivers later.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Now that BMDMA EH ops are separated out from SFF ops, mv5_ops doesn't
have to explicitly reset ->error_handler() and ->post_internal_cmd().
Drop them.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Implicit slab.h inclusion via percpu.h is about to go away. Make sure
gfp.h or slab.h is included as necessary.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Currently, native capacity unlocking is initiated only when a
recognized partition extends beyond the end of the disk. However,
there are several other unhandled cases where truncated capacity can
lead to misdetection of partitions.
* Partition table is fully beyond EOD.
* Partition table is partially beyond EOD (daisy chained ones).
* Recognized partition starts beyond EOD.
This patch updates generic partition check code such that all the
above three cases are handled too. For the first two, @state tracks
whether low level partition check code tried to read beyond EOD during
partition scan and triggers native capacity unlocking accordingly.
The third is now handled similarly to the original unlocking case.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ben Hutchings <ben@decadent.org.uk>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Make the following changes to partition check code.
* Add ->bdev to struct parsed_partitions.
* Introduce read_part_sector() which is a simple wrapper around
read_dev_sector() which takes struct parsed_partitions *state
instead of @bdev.
* For functions which used to take @state and @bdev, drop @bdev. For
functions which used to take @bdev, replace it with @state.
* While updating, drop superflous checks on NULL state/bdev in ldm.c.
This cleans up the API a bit and enables better handling of IO errors
during partition check as the generic partition check code now has
much better visibility into what went wrong in the low level code
paths.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ben Hutchings <ben@decadent.org.uk>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Tejun Heo