mirror of
https://github.com/suyu-emu/horinux.git
synced 2026-09-21 14:15:21 -07:00
Merge tag 'v3.6-rc6' into x86/cleanups
Merge Linux v3.6-rc6 before applying more cleanups. Signed-off-by: Ingo Molnar <mingo@kernel.org>
This commit is contained in:
Ingo Molnar
@@ -210,3 +210,15 @@ Users:
|
||||
firmware assigned instance number of the PCI
|
||||
device that can help in understanding the firmware
|
||||
intended order of the PCI device.
|
||||
|
||||
What: /sys/bus/pci/devices/.../d3cold_allowed
|
||||
Date: July 2012
|
||||
Contact: Huang Ying <ying.huang@intel.com>
|
||||
Description:
|
||||
d3cold_allowed is bit to control whether the corresponding PCI
|
||||
device can be put into D3Cold state. If it is cleared, the
|
||||
device will never be put into D3Cold state. If it is set, the
|
||||
device may be put into D3Cold state if other requirements are
|
||||
satisfied too. Reading this attribute will show the current
|
||||
value of d3cold_allowed bit. Writing this attribute will set
|
||||
the value of d3cold_allowed bit.
|
||||
|
||||
@@ -5,4 +5,15 @@ Contact: "Ike Panhc <ike.pan@canonical.com>"
|
||||
Description:
|
||||
Control the power of camera module. 1 means on, 0 means off.
|
||||
|
||||
What: /sys/devices/platform/ideapad/fan_mode
|
||||
Date: June 2012
|
||||
KernelVersion: 3.6
|
||||
Contact: "Maxim Mikityanskiy <maxtram95@gmail.com>"
|
||||
Description:
|
||||
Change fan mode
|
||||
There are four available modes:
|
||||
* 0 -> Super Silent Mode
|
||||
* 1 -> Standard Mode
|
||||
* 2 -> Dust Cleaning
|
||||
* 4 -> Efficient Thermal Dissipation Mode
|
||||
|
||||
|
||||
@@ -125,7 +125,7 @@ the structure refers to a radio tuner the
|
||||
<constant>V4L2_TUNER_CAP_NORM</constant> flags can't be used.</para>
|
||||
<para>If multiple frequency bands are supported, then
|
||||
<structfield>capability</structfield> is the union of all
|
||||
<structfield>capability></structfield> fields of each &v4l2-frequency-band;.
|
||||
<structfield>capability</structfield> fields of each &v4l2-frequency-band;.
|
||||
</para></entry>
|
||||
</row>
|
||||
<row>
|
||||
|
||||
@@ -3,15 +3,21 @@
|
||||
biodoc.txt
|
||||
- Notes on the Generic Block Layer Rewrite in Linux 2.5
|
||||
capability.txt
|
||||
- Generic Block Device Capability (/sys/block/<disk>/capability)
|
||||
- Generic Block Device Capability (/sys/block/<device>/capability)
|
||||
cfq-iosched.txt
|
||||
- CFQ IO scheduler tunables
|
||||
data-integrity.txt
|
||||
- Block data integrity
|
||||
deadline-iosched.txt
|
||||
- Deadline IO scheduler tunables
|
||||
ioprio.txt
|
||||
- Block io priorities (in CFQ scheduler)
|
||||
queue-sysfs.txt
|
||||
- Queue's sysfs entries
|
||||
request.txt
|
||||
- The members of struct request (in include/linux/blkdev.h)
|
||||
stat.txt
|
||||
- Block layer statistics in /sys/block/<dev>/stat
|
||||
- Block layer statistics in /sys/block/<device>/stat
|
||||
switching-sched.txt
|
||||
- Switching I/O schedulers at runtime
|
||||
writeback_cache_control.txt
|
||||
|
||||
@@ -1,3 +1,14 @@
|
||||
CFQ (Complete Fairness Queueing)
|
||||
===============================
|
||||
|
||||
The main aim of CFQ scheduler is to provide a fair allocation of the disk
|
||||
I/O bandwidth for all the processes which requests an I/O operation.
|
||||
|
||||
CFQ maintains the per process queue for the processes which request I/O
|
||||
operation(syncronous requests). In case of asynchronous requests, all the
|
||||
requests from all the processes are batched together according to their
|
||||
process's I/O priority.
|
||||
|
||||
CFQ ioscheduler tunables
|
||||
========================
|
||||
|
||||
@@ -25,6 +36,72 @@ there are multiple spindles behind single LUN (Host based hardware RAID
|
||||
controller or for storage arrays), setting slice_idle=0 might end up in better
|
||||
throughput and acceptable latencies.
|
||||
|
||||
back_seek_max
|
||||
-------------
|
||||
This specifies, given in Kbytes, the maximum "distance" for backward seeking.
|
||||
The distance is the amount of space from the current head location to the
|
||||
sectors that are backward in terms of distance.
|
||||
|
||||
This parameter allows the scheduler to anticipate requests in the "backward"
|
||||
direction and consider them as being the "next" if they are within this
|
||||
distance from the current head location.
|
||||
|
||||
back_seek_penalty
|
||||
-----------------
|
||||
This parameter is used to compute the cost of backward seeking. If the
|
||||
backward distance of request is just 1/back_seek_penalty from a "front"
|
||||
request, then the seeking cost of two requests is considered equivalent.
|
||||
|
||||
So scheduler will not bias toward one or the other request (otherwise scheduler
|
||||
will bias toward front request). Default value of back_seek_penalty is 2.
|
||||
|
||||
fifo_expire_async
|
||||
-----------------
|
||||
This parameter is used to set the timeout of asynchronous requests. Default
|
||||
value of this is 248ms.
|
||||
|
||||
fifo_expire_sync
|
||||
----------------
|
||||
This parameter is used to set the timeout of synchronous requests. Default
|
||||
value of this is 124ms. In case to favor synchronous requests over asynchronous
|
||||
one, this value should be decreased relative to fifo_expire_async.
|
||||
|
||||
slice_async
|
||||
-----------
|
||||
This parameter is same as of slice_sync but for asynchronous queue. The
|
||||
default value is 40ms.
|
||||
|
||||
slice_async_rq
|
||||
--------------
|
||||
This parameter is used to limit the dispatching of asynchronous request to
|
||||
device request queue in queue's slice time. The maximum number of request that
|
||||
are allowed to be dispatched also depends upon the io priority. Default value
|
||||
for this is 2.
|
||||
|
||||
slice_sync
|
||||
----------
|
||||
When a queue is selected for execution, the queues IO requests are only
|
||||
executed for a certain amount of time(time_slice) before switching to another
|
||||
queue. This parameter is used to calculate the time slice of synchronous
|
||||
queue.
|
||||
|
||||
time_slice is computed using the below equation:-
|
||||
time_slice = slice_sync + (slice_sync/5 * (4 - prio)). To increase the
|
||||
time_slice of synchronous queue, increase the value of slice_sync. Default
|
||||
value is 100ms.
|
||||
|
||||
quantum
|
||||
-------
|
||||
This specifies the number of request dispatched to the device queue. In a
|
||||
queue's time slice, a request will not be dispatched if the number of request
|
||||
in the device exceeds this parameter. This parameter is used for synchronous
|
||||
request.
|
||||
|
||||
In case of storage with several disk, this setting can limit the parallel
|
||||
processing of request. Therefore, increasing the value can imporve the
|
||||
performace although this can cause the latency of some I/O to increase due
|
||||
to more number of requests.
|
||||
|
||||
CFQ IOPS Mode for group scheduling
|
||||
===================================
|
||||
Basic CFQ design is to provide priority based time slices. Higher priority
|
||||
|
||||
@@ -9,20 +9,71 @@ These files are the ones found in the /sys/block/xxx/queue/ directory.
|
||||
Files denoted with a RO postfix are readonly and the RW postfix means
|
||||
read-write.
|
||||
|
||||
add_random (RW)
|
||||
----------------
|
||||
This file allows to trun off the disk entropy contribution. Default
|
||||
value of this file is '1'(on).
|
||||
|
||||
discard_granularity (RO)
|
||||
-----------------------
|
||||
This shows the size of internal allocation of the device in bytes, if
|
||||
reported by the device. A value of '0' means device does not support
|
||||
the discard functionality.
|
||||
|
||||
discard_max_bytes (RO)
|
||||
----------------------
|
||||
Devices that support discard functionality may have internal limits on
|
||||
the number of bytes that can be trimmed or unmapped in a single operation.
|
||||
The discard_max_bytes parameter is set by the device driver to the maximum
|
||||
number of bytes that can be discarded in a single operation. Discard
|
||||
requests issued to the device must not exceed this limit. A discard_max_bytes
|
||||
value of 0 means that the device does not support discard functionality.
|
||||
|
||||
discard_zeroes_data (RO)
|
||||
------------------------
|
||||
When read, this file will show if the discarded block are zeroed by the
|
||||
device or not. If its value is '1' the blocks are zeroed otherwise not.
|
||||
|
||||
hw_sector_size (RO)
|
||||
-------------------
|
||||
This is the hardware sector size of the device, in bytes.
|
||||
|
||||
iostats (RW)
|
||||
-------------
|
||||
This file is used to control (on/off) the iostats accounting of the
|
||||
disk.
|
||||
|
||||
logical_block_size (RO)
|
||||
-----------------------
|
||||
This is the logcal block size of the device, in bytes.
|
||||
|
||||
max_hw_sectors_kb (RO)
|
||||
----------------------
|
||||
This is the maximum number of kilobytes supported in a single data transfer.
|
||||
|
||||
max_integrity_segments (RO)
|
||||
---------------------------
|
||||
When read, this file shows the max limit of integrity segments as
|
||||
set by block layer which a hardware controller can handle.
|
||||
|
||||
max_sectors_kb (RW)
|
||||
-------------------
|
||||
This is the maximum number of kilobytes that the block layer will allow
|
||||
for a filesystem request. Must be smaller than or equal to the maximum
|
||||
size allowed by the hardware.
|
||||
|
||||
max_segments (RO)
|
||||
-----------------
|
||||
Maximum number of segments of the device.
|
||||
|
||||
max_segment_size (RO)
|
||||
---------------------
|
||||
Maximum segment size of the device.
|
||||
|
||||
minimum_io_size (RO)
|
||||
--------------------
|
||||
This is the smallest preferred io size reported by the device.
|
||||
|
||||
nomerges (RW)
|
||||
-------------
|
||||
This enables the user to disable the lookup logic involved with IO
|
||||
@@ -45,11 +96,24 @@ per-block-cgroup request pool. IOW, if there are N block cgroups,
|
||||
each request queue may have upto N request pools, each independently
|
||||
regulated by nr_requests.
|
||||
|
||||
optimal_io_size (RO)
|
||||
--------------------
|
||||
This is the optimal io size reported by the device.
|
||||
|
||||
physical_block_size (RO)
|
||||
------------------------
|
||||
This is the physical block size of device, in bytes.
|
||||
|
||||
read_ahead_kb (RW)
|
||||
------------------
|
||||
Maximum number of kilobytes to read-ahead for filesystems on this block
|
||||
device.
|
||||
|
||||
rotational (RW)
|
||||
---------------
|
||||
This file is used to stat if the device is of rotational type or
|
||||
non-rotational type.
|
||||
|
||||
rq_affinity (RW)
|
||||
----------------
|
||||
If this option is '1', the block layer will migrate request completions to the
|
||||
|
||||
@@ -10,8 +10,8 @@ Required properties:
|
||||
- compatible : Should be "fsl,<chip>-esdhc"
|
||||
|
||||
Optional properties:
|
||||
- fsl,cd-internal : Indicate to use controller internal card detection
|
||||
- fsl,wp-internal : Indicate to use controller internal write protection
|
||||
- fsl,cd-controller : Indicate to use controller internal card detection
|
||||
- fsl,wp-controller : Indicate to use controller internal write protection
|
||||
|
||||
Examples:
|
||||
|
||||
@@ -19,8 +19,8 @@ esdhc@70004000 {
|
||||
compatible = "fsl,imx51-esdhc";
|
||||
reg = <0x70004000 0x4000>;
|
||||
interrupts = <1>;
|
||||
fsl,cd-internal;
|
||||
fsl,wp-internal;
|
||||
fsl,cd-controller;
|
||||
fsl,wp-controller;
|
||||
};
|
||||
|
||||
esdhc@70008000 {
|
||||
|
||||
@@ -9,9 +9,9 @@ Required properties:
|
||||
- regulators: list of regulators provided by this controller, must have
|
||||
property "regulator-compatible" to match their hardware counterparts:
|
||||
sm[0-2], ldo[0-9] and ldo_rtc
|
||||
- sm0-supply: The input supply for the SM0.
|
||||
- sm1-supply: The input supply for the SM1.
|
||||
- sm2-supply: The input supply for the SM2.
|
||||
- vin-sm0-supply: The input supply for the SM0.
|
||||
- vin-sm1-supply: The input supply for the SM1.
|
||||
- vin-sm2-supply: The input supply for the SM2.
|
||||
- vinldo01-supply: The input supply for the LDO1 and LDO2
|
||||
- vinldo23-supply: The input supply for the LDO2 and LDO3
|
||||
- vinldo4-supply: The input supply for the LDO4
|
||||
@@ -30,9 +30,9 @@ Example:
|
||||
#gpio-cells = <2>;
|
||||
gpio-controller;
|
||||
|
||||
sm0-supply = <&some_reg>;
|
||||
sm1-supply = <&some_reg>;
|
||||
sm2-supply = <&some_reg>;
|
||||
vin-sm0-supply = <&some_reg>;
|
||||
vin-sm1-supply = <&some_reg>;
|
||||
vin-sm2-supply = <&some_reg>;
|
||||
vinldo01-supply = <...>;
|
||||
vinldo23-supply = <...>;
|
||||
vinldo4-supply = <...>;
|
||||
|
||||
@@ -579,7 +579,7 @@ Why: KVM tracepoints provide mostly equivalent information in a much more
|
||||
----------------------------
|
||||
|
||||
What: at91-mci driver ("CONFIG_MMC_AT91")
|
||||
When: 3.7
|
||||
When: 3.8
|
||||
Why: There are two mci drivers: at91-mci and atmel-mci. The PDC support
|
||||
was added to atmel-mci as a first step to support more chips.
|
||||
Then at91-mci was kept only for old IP versions (on at91rm9200 and
|
||||
|
||||
@@ -137,6 +137,17 @@ errors=panic|continue|remount-ro
|
||||
without doing anything or remount the partition in
|
||||
read-only mode (default behavior).
|
||||
|
||||
discard -- If set, issues discard/TRIM commands to the block
|
||||
device when blocks are freed. This is useful for SSD devices
|
||||
and sparse/thinly-provisoned LUNs.
|
||||
|
||||
nfs -- This option maintains an index (cache) of directory
|
||||
inodes by i_logstart which is used by the nfs-related code to
|
||||
improve look-ups.
|
||||
|
||||
Enable this only if you want to export the FAT filesystem
|
||||
over NFS
|
||||
|
||||
<bool>: 0,1,yes,no,true,false
|
||||
|
||||
TODO
|
||||
|
||||
@@ -21,6 +21,7 @@ Supported adapters:
|
||||
* Intel DH89xxCC (PCH)
|
||||
* Intel Panther Point (PCH)
|
||||
* Intel Lynx Point (PCH)
|
||||
* Intel Lynx Point-LP (PCH)
|
||||
Datasheets: Publicly available at the Intel website
|
||||
|
||||
On Intel Patsburg and later chipsets, both the normal host SMBus controller
|
||||
|
||||
@@ -51,8 +51,23 @@ Built-in netconsole starts immediately after the TCP stack is
|
||||
initialized and attempts to bring up the supplied dev at the supplied
|
||||
address.
|
||||
|
||||
The remote host can run either 'netcat -u -l -p <port>',
|
||||
'nc -l -u <port>' or syslogd.
|
||||
The remote host has several options to receive the kernel messages,
|
||||
for example:
|
||||
|
||||
1) syslogd
|
||||
|
||||
2) netcat
|
||||
|
||||
On distributions using a BSD-based netcat version (e.g. Fedora,
|
||||
openSUSE and Ubuntu) the listening port must be specified without
|
||||
the -p switch:
|
||||
|
||||
'nc -u -l -p <port>' / 'nc -u -l <port>' or
|
||||
'netcat -u -l -p <port>' / 'netcat -u -l <port>'
|
||||
|
||||
3) socat
|
||||
|
||||
'socat udp-recv:<port> -'
|
||||
|
||||
Dynamic reconfiguration:
|
||||
========================
|
||||
|
||||
@@ -840,9 +840,9 @@ static unsigned long i2c_pin_configs[] = {
|
||||
|
||||
static struct pinctrl_map __initdata mapping[] = {
|
||||
PIN_MAP_MUX_GROUP("foo-i2c.0", PINCTRL_STATE_DEFAULT, "pinctrl-foo", "i2c0", "i2c0"),
|
||||
PIN_MAP_MUX_CONFIGS_GROUP("foo-i2c.0", PINCTRL_STATE_DEFAULT, "pinctrl-foo", "i2c0", i2c_grp_configs),
|
||||
PIN_MAP_MUX_CONFIGS_PIN("foo-i2c.0", PINCTRL_STATE_DEFAULT, "pinctrl-foo", "i2c0scl", i2c_pin_configs),
|
||||
PIN_MAP_MUX_CONFIGS_PIN("foo-i2c.0", PINCTRL_STATE_DEFAULT, "pinctrl-foo", "i2c0sda", i2c_pin_configs),
|
||||
PIN_MAP_CONFIGS_GROUP("foo-i2c.0", PINCTRL_STATE_DEFAULT, "pinctrl-foo", "i2c0", i2c_grp_configs),
|
||||
PIN_MAP_CONFIGS_PIN("foo-i2c.0", PINCTRL_STATE_DEFAULT, "pinctrl-foo", "i2c0scl", i2c_pin_configs),
|
||||
PIN_MAP_CONFIGS_PIN("foo-i2c.0", PINCTRL_STATE_DEFAULT, "pinctrl-foo", "i2c0sda", i2c_pin_configs),
|
||||
};
|
||||
|
||||
Finally, some devices expect the mapping table to contain certain specific
|
||||
|
||||
@@ -299,11 +299,17 @@ map_hugetlb.c.
|
||||
*******************************************************************
|
||||
|
||||
/*
|
||||
* hugepage-shm: see Documentation/vm/hugepage-shm.c
|
||||
* map_hugetlb: see tools/testing/selftests/vm/map_hugetlb.c
|
||||
*/
|
||||
|
||||
*******************************************************************
|
||||
|
||||
/*
|
||||
* hugepage-mmap: see Documentation/vm/hugepage-mmap.c
|
||||
* hugepage-shm: see tools/testing/selftests/vm/hugepage-shm.c
|
||||
*/
|
||||
|
||||
*******************************************************************
|
||||
|
||||
/*
|
||||
* hugepage-mmap: see tools/testing/selftests/vm/hugepage-mmap.c
|
||||
*/
|
||||
|
||||
@@ -3,6 +3,7 @@ Kernel driver w1_therm
|
||||
|
||||
Supported chips:
|
||||
* Maxim ds18*20 based temperature sensors.
|
||||
* Maxim ds1825 based temperature sensors.
|
||||
|
||||
Author: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
|
||||
|
||||
@@ -15,6 +16,7 @@ supported family codes:
|
||||
W1_THERM_DS18S20 0x10
|
||||
W1_THERM_DS1822 0x22
|
||||
W1_THERM_DS18B20 0x28
|
||||
W1_THERM_DS1825 0x3B
|
||||
|
||||
Support is provided through the sysfs w1_slave file. Each open and
|
||||
read sequence will initiate a temperature conversion then provide two
|
||||
|
||||
@@ -31,7 +31,7 @@ static void keep_alive(void)
|
||||
* or "-e" to enable the card.
|
||||
*/
|
||||
|
||||
void term(int sig)
|
||||
static void term(int sig)
|
||||
{
|
||||
close(fd);
|
||||
fprintf(stderr, "Stopping watchdog ticks...\n");
|
||||
|
||||
+18
-7
@@ -2217,7 +2217,7 @@ S: Maintained
|
||||
F: drivers/scsi/tmscsim.*
|
||||
|
||||
DC395x SCSI driver
|
||||
M: Oliver Neukum <oliver@neukum.name>
|
||||
M: Oliver Neukum <oliver@neukum.org>
|
||||
M: Ali Akcaagac <aliakc@web.de>
|
||||
M: Jamie Lenehan <lenehan@twibble.org>
|
||||
W: http://twibble.org/dist/dc395x/
|
||||
@@ -3388,7 +3388,7 @@ M: "Wolfram Sang (embedded platforms)" <w.sang@pengutronix.de>
|
||||
L: linux-i2c@vger.kernel.org
|
||||
W: http://i2c.wiki.kernel.org/
|
||||
T: quilt kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-i2c/
|
||||
T: git git://git.fluff.org/bjdooks/linux.git
|
||||
T: git git://git.pengutronix.de/git/wsa/linux.git
|
||||
S: Maintained
|
||||
F: Documentation/i2c/
|
||||
F: drivers/i2c/
|
||||
@@ -4537,7 +4537,7 @@ S: Supported
|
||||
F: arch/microblaze/
|
||||
|
||||
MICROTEK X6 SCANNER
|
||||
M: Oliver Neukum <oliver@neukum.name>
|
||||
M: Oliver Neukum <oliver@neukum.org>
|
||||
S: Maintained
|
||||
F: drivers/usb/image/microtek.*
|
||||
|
||||
@@ -7076,7 +7076,7 @@ F: include/linux/mtd/ubi.h
|
||||
F: include/mtd/ubi-user.h
|
||||
|
||||
USB ACM DRIVER
|
||||
M: Oliver Neukum <oliver@neukum.name>
|
||||
M: Oliver Neukum <oliver@neukum.org>
|
||||
L: linux-usb@vger.kernel.org
|
||||
S: Maintained
|
||||
F: Documentation/usb/acm.txt
|
||||
@@ -7097,7 +7097,7 @@ S: Supported
|
||||
F: drivers/block/ub.c
|
||||
|
||||
USB CDC ETHERNET DRIVER
|
||||
M: Oliver Neukum <oliver@neukum.name>
|
||||
M: Oliver Neukum <oliver@neukum.org>
|
||||
L: linux-usb@vger.kernel.org
|
||||
S: Maintained
|
||||
F: drivers/net/usb/cdc_*.c
|
||||
@@ -7170,7 +7170,7 @@ F: drivers/usb/host/isp116x*
|
||||
F: include/linux/usb/isp116x.h
|
||||
|
||||
USB KAWASAKI LSI DRIVER
|
||||
M: Oliver Neukum <oliver@neukum.name>
|
||||
M: Oliver Neukum <oliver@neukum.org>
|
||||
L: linux-usb@vger.kernel.org
|
||||
S: Maintained
|
||||
F: drivers/usb/serial/kl5kusb105.*
|
||||
@@ -7288,6 +7288,12 @@ W: http://www.connecttech.com
|
||||
S: Supported
|
||||
F: drivers/usb/serial/whiteheat*
|
||||
|
||||
USB SMSC75XX ETHERNET DRIVER
|
||||
M: Steve Glendinning <steve.glendinning@shawell.net>
|
||||
L: netdev@vger.kernel.org
|
||||
S: Maintained
|
||||
F: drivers/net/usb/smsc75xx.*
|
||||
|
||||
USB SMSC95XX ETHERNET DRIVER
|
||||
M: Steve Glendinning <steve.glendinning@shawell.net>
|
||||
L: netdev@vger.kernel.org
|
||||
@@ -7670,23 +7676,28 @@ S: Supported
|
||||
F: Documentation/hwmon/wm83??
|
||||
F: arch/arm/mach-s3c64xx/mach-crag6410*
|
||||
F: drivers/clk/clk-wm83*.c
|
||||
F: drivers/extcon/extcon-arizona.c
|
||||
F: drivers/leds/leds-wm83*.c
|
||||
F: drivers/gpio/gpio-*wm*.c
|
||||
F: drivers/gpio/gpio-arizona.c
|
||||
F: drivers/hwmon/wm83??-hwmon.c
|
||||
F: drivers/input/misc/wm831x-on.c
|
||||
F: drivers/input/touchscreen/wm831x-ts.c
|
||||
F: drivers/input/touchscreen/wm97*.c
|
||||
F: drivers/mfd/wm8*.c
|
||||
F: drivers/mfd/arizona*
|
||||
F: drivers/mfd/wm*.c
|
||||
F: drivers/power/wm83*.c
|
||||
F: drivers/rtc/rtc-wm83*.c
|
||||
F: drivers/regulator/wm8*.c
|
||||
F: drivers/video/backlight/wm83*_bl.c
|
||||
F: drivers/watchdog/wm83*_wdt.c
|
||||
F: include/linux/mfd/arizona/
|
||||
F: include/linux/mfd/wm831x/
|
||||
F: include/linux/mfd/wm8350/
|
||||
F: include/linux/mfd/wm8400*
|
||||
F: include/linux/wm97xx.h
|
||||
F: include/sound/wm????.h
|
||||
F: sound/soc/codecs/arizona.?
|
||||
F: sound/soc/codecs/wm*
|
||||
|
||||
WORKQUEUE
|
||||
|
||||
@@ -1,7 +1,7 @@
|
||||
VERSION = 3
|
||||
PATCHLEVEL = 6
|
||||
SUBLEVEL = 0
|
||||
EXTRAVERSION = -rc2
|
||||
EXTRAVERSION = -rc6
|
||||
NAME = Saber-toothed Squirrel
|
||||
|
||||
# *DOCUMENTATION*
|
||||
|
||||
@@ -18,6 +18,8 @@ config ALPHA
|
||||
select ARCH_HAVE_NMI_SAFE_CMPXCHG
|
||||
select GENERIC_SMP_IDLE_THREAD
|
||||
select GENERIC_CMOS_UPDATE
|
||||
select GENERIC_STRNCPY_FROM_USER
|
||||
select GENERIC_STRNLEN_USER
|
||||
help
|
||||
The Alpha is a 64-bit general-purpose processor designed and
|
||||
marketed by the Digital Equipment Corporation of blessed memory,
|
||||
|
||||
@@ -14,8 +14,8 @@
|
||||
*/
|
||||
|
||||
|
||||
#define ATOMIC_INIT(i) ( (atomic_t) { (i) } )
|
||||
#define ATOMIC64_INIT(i) ( (atomic64_t) { (i) } )
|
||||
#define ATOMIC_INIT(i) { (i) }
|
||||
#define ATOMIC64_INIT(i) { (i) }
|
||||
|
||||
#define atomic_read(v) (*(volatile int *)&(v)->counter)
|
||||
#define atomic64_read(v) (*(volatile long *)&(v)->counter)
|
||||
|
||||
Some files were not shown because too many files have changed in this diff Show More
Reference in New Issue
Block a user