Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull perf updates from Ingo Molnar:
 "Most of the changes are for tooling, the main changes in this cycle were:

   - Improve Intel-PT hardware tracing support, both on the kernel and
     on the tooling side: PTWRITE instruction support, power events for
     C-state tracing, etc. (Adrian Hunter)

   - Add support to measure SMI cost to the x86 architecture, with
     tooling support in 'perf stat' (Kan Liang)

   - Support function filtering in 'perf ftrace', plus related
     improvements (Namhyung Kim)

   - Allow adding and removing fields to the default 'perf script'
     columns, using + or - as field prefixes to do so (Andi Kleen)

   - Allow resolving the DSO name with 'perf script -F brstack{sym,off},dso'
     (Mark Santaniello)

   - Add perf tooling unwind support for PowerPC (Paolo Bonzini)

   - ... and various other improvements as well"

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (84 commits)
  perf auxtrace: Add CPU filter support
  perf intel-pt: Do not use TSC packets for calculating CPU cycles to TSC
  perf intel-pt: Update documentation to include new ptwrite and power events
  perf intel-pt: Add example script for power events and PTWRITE
  perf intel-pt: Synthesize new power and "ptwrite" events
  perf intel-pt: Move code in intel_pt_synth_events() to simplify attr setting
  perf intel-pt: Factor out intel_pt_set_event_name()
  perf intel-pt: Tidy messages into called function intel_pt_synth_event()
  perf intel-pt: Tidy Intel PT evsel lookup into separate function
  perf intel-pt: Join needlessly wrapped lines
  perf intel-pt: Remove unused instructions_sample_period
  perf intel-pt: Factor out common code synthesizing event samples
  perf script: Add synthesized Intel PT power and ptwrite events
  perf/x86/intel: Constify the 'lbr_desc[]' array and make a function static
  perf script: Add 'synth' field for synthesized event payloads
  perf auxtrace: Add itrace option to output power events
  perf auxtrace: Add itrace option to output ptwrite events
  tools include: Add byte-swapping macros to kernel.h
  perf script: Add 'synth' event type for synthesized events
  x86/insn: perf tools: Add new ptwrite instruction
  ...

arch/x86/events/core.c

@@ -1750,6 +1750,8 @@ ssize_t x86_event_sysfs_show(char *page, u64 config, u64 event)
 	return ret;
 }
 
+static struct attribute_group x86_pmu_attr_group;
+
 static int __init init_hw_perf_events(void)
 {
 	struct x86_pmu_quirk *quirk;
@@ -1813,6 +1815,14 @@ static int __init init_hw_perf_events(void)
 			x86_pmu_events_group.attrs = tmp;
 	}
 
+	if (x86_pmu.attrs) {
+		struct attribute **tmp;
+
+		tmp = merge_attr(x86_pmu_attr_group.attrs, x86_pmu.attrs);
+		if (!WARN_ON(!tmp))
+			x86_pmu_attr_group.attrs = tmp;
+	}
+
 	pr_info("... version:                %d\n",     x86_pmu.version);
 	pr_info("... bit width:              %d\n",     x86_pmu.cntval_bits);
 	pr_info("... generic registers:      %d\n",     x86_pmu.num_counters);

arch/x86/events/intel/core.c

@@ -3160,6 +3160,19 @@ err:
 	return -ENOMEM;
 }
 
+static void flip_smm_bit(void *data)
+{
+	unsigned long set = *(unsigned long *)data;
+
+	if (set > 0) {
+		msr_set_bit(MSR_IA32_DEBUGCTLMSR,
+			    DEBUGCTLMSR_FREEZE_IN_SMM_BIT);
+	} else {
+		msr_clear_bit(MSR_IA32_DEBUGCTLMSR,
+			      DEBUGCTLMSR_FREEZE_IN_SMM_BIT);
+	}
+}
+
 static void intel_pmu_cpu_starting(int cpu)
 {
 	struct cpu_hw_events *cpuc = &per_cpu(cpu_hw_events, cpu);
@@ -3174,6 +3187,8 @@ static void intel_pmu_cpu_starting(int cpu)
 
 	cpuc->lbr_sel = NULL;
 
+	flip_smm_bit(&x86_pmu.attr_freeze_on_smi);
+
 	if (!cpuc->shared_regs)
 		return;
 
@@ -3595,6 +3610,52 @@ static struct attribute *hsw_events_attrs[] = {
 	NULL
 };
 
+static ssize_t freeze_on_smi_show(struct device *cdev,
+				  struct device_attribute *attr,
+				  char *buf)
+{
+	return sprintf(buf, "%lu\n", x86_pmu.attr_freeze_on_smi);
+}
+
+static DEFINE_MUTEX(freeze_on_smi_mutex);
+
+static ssize_t freeze_on_smi_store(struct device *cdev,
+				   struct device_attribute *attr,
+				   const char *buf, size_t count)
+{
+	unsigned long val;
+	ssize_t ret;
+
+	ret = kstrtoul(buf, 0, &val);
+	if (ret)
+		return ret;
+
+	if (val > 1)
+		return -EINVAL;
+
+	mutex_lock(&freeze_on_smi_mutex);
+
+	if (x86_pmu.attr_freeze_on_smi == val)
+		goto done;
+
+	x86_pmu.attr_freeze_on_smi = val;
+
+	get_online_cpus();
+	on_each_cpu(flip_smm_bit, &val, 1);
+	put_online_cpus();
+done:
+	mutex_unlock(&freeze_on_smi_mutex);
+
+	return count;
+}
+
+static DEVICE_ATTR_RW(freeze_on_smi);
+
+static struct attribute *intel_pmu_attrs[] = {
+	&dev_attr_freeze_on_smi.attr,
+	NULL,
+};
+
 __init int intel_pmu_init(void)
 {
 	union cpuid10_edx edx;
@@ -3641,6 +3702,8 @@ __init int intel_pmu_init(void)
 
 	x86_pmu.max_pebs_events		= min_t(unsigned, MAX_PEBS_EVENTS, x86_pmu.num_counters);
 
+
+	x86_pmu.attrs			= intel_pmu_attrs;
 	/*
 	 * Quirk: v2 perfmon does not report fixed-purpose events, so
 	 * assume at least 3 events, when not running in a hypervisor:

arch/x86/events/intel/lbr.c

@@ -18,7 +18,7 @@ enum {
 	LBR_FORMAT_MAX_KNOWN    = LBR_FORMAT_TIME,
 };
 
-static enum {
+static const enum {
 	LBR_EIP_FLAGS		= 1,
 	LBR_TSX			= 2,
 } lbr_desc[LBR_FORMAT_MAX_KNOWN + 1] = {
@@ -287,7 +287,7 @@ inline u64 lbr_from_signext_quirk_wr(u64 val)
 /*
  * If quirk is needed, ensure sign extension is 61 bits:
  */
-u64 lbr_from_signext_quirk_rd(u64 val)
+static u64 lbr_from_signext_quirk_rd(u64 val)
 {
 	if (static_branch_unlikely(&lbr_from_quirk_key)) {
 		/*

arch/x86/events/perf_event.h

@@ -562,6 +562,9 @@ struct x86_pmu {
 	ssize_t		(*events_sysfs_show)(char *page, u64 config);
 	struct attribute **cpu_events;
 
+	unsigned long	attr_freeze_on_smi;
+	struct attribute **attrs;
+
 	/*
 	 * CPU Hotplug hooks
 	 */

arch/x86/include/asm/msr-index.h

@@ -137,6 +137,8 @@
 #define DEBUGCTLMSR_BTS_OFF_OS		(1UL <<  9)
 #define DEBUGCTLMSR_BTS_OFF_USR		(1UL << 10)
 #define DEBUGCTLMSR_FREEZE_LBRS_ON_PMI	(1UL << 11)
+#define DEBUGCTLMSR_FREEZE_IN_SMM_BIT	14
+#define DEBUGCTLMSR_FREEZE_IN_SMM	(1UL << DEBUGCTLMSR_FREEZE_IN_SMM_BIT)
 
 #define MSR_PEBS_FRONTEND		0x000003f7
 

arch/x86/lib/x86-opcode-map.txt

@@ -1009,7 +1009,7 @@ GrpTable: Grp15
 1: fxstor | RDGSBASE Ry (F3),(11B)
 2: vldmxcsr Md (v1) | WRFSBASE Ry (F3),(11B)
 3: vstmxcsr Md (v1) | WRGSBASE Ry (F3),(11B)
-4: XSAVE
+4: XSAVE | ptwrite Ey (F3),(11B)
 5: XRSTOR | lfence (11B)
 6: XSAVEOPT | clwb (66) | mfence (11B)
 7: clflush | clflushopt (66) | sfence (11B)

kernel/events/core.c

@@ -925,11 +925,6 @@ static inline int is_cgroup_event(struct perf_event *event)
 	return 0;
 }
 
-static inline u64 perf_cgroup_event_cgrp_time(struct perf_event *event)
-{
-	return 0;
-}
-
 static inline void update_cgrp_time_from_event(struct perf_event *event)
 {
 }
@@ -5729,9 +5724,6 @@ static void perf_output_read_one(struct perf_output_handle *handle,
 	__output_copy(handle, values, n * sizeof(u64));
 }
 
-/*
- * XXX PERF_FORMAT_GROUP vs inherited events seems difficult.
- */
 static void perf_output_read_group(struct perf_output_handle *handle,
 			    struct perf_event *event,
 			    u64 enabled, u64 running)
@@ -5776,6 +5768,13 @@ static void perf_output_read_group(struct perf_output_handle *handle,
 #define PERF_FORMAT_TOTAL_TIMES (PERF_FORMAT_TOTAL_TIME_ENABLED|\
 				 PERF_FORMAT_TOTAL_TIME_RUNNING)
 
+/*
+ * XXX PERF_SAMPLE_READ vs inherited events seems difficult.
+ *
+ * The problem is that its both hard and excessively expensive to iterate the
+ * child list, not to mention that its impossible to IPI the children running
+ * on another CPU, from interrupt/NMI context.
+ */
 static void perf_output_read(struct perf_output_handle *handle,
 			     struct perf_event *event)
 {
@@ -9193,7 +9192,7 @@ static int perf_try_init_event(struct pmu *pmu, struct perf_event *event)
 
 static struct pmu *perf_init_event(struct perf_event *event)
 {
-	struct pmu *pmu = NULL;
+	struct pmu *pmu;
 	int idx;
 	int ret;
 
@@ -9462,9 +9461,10 @@ perf_event_alloc(struct perf_event_attr *attr, int cpu,
 	local64_set(&hwc->period_left, hwc->sample_period);
 
 	/*
-	 * we currently do not support PERF_FORMAT_GROUP on inherited events
+	 * We currently do not support PERF_SAMPLE_READ on inherited events.
+	 * See perf_output_read().
 	 */
-	if (attr->inherit && (attr->read_format & PERF_FORMAT_GROUP))
+	if (attr->inherit && (attr->sample_type & PERF_SAMPLE_READ))
 		goto err_ns;
 
 	if (!has_branch_stack(event))
@@ -9477,9 +9477,7 @@ perf_event_alloc(struct perf_event_attr *attr, int cpu,
 	}
 
 	pmu = perf_init_event(event);
-	if (!pmu)
-		goto err_ns;
-	else if (IS_ERR(pmu)) {
+	if (IS_ERR(pmu)) {
 		err = PTR_ERR(pmu);
 		goto err_ns;
 	}
@@ -9492,8 +9490,10 @@ perf_event_alloc(struct perf_event_attr *attr, int cpu,
 		event->addr_filters_offs = kcalloc(pmu->nr_addr_filters,
 						   sizeof(unsigned long),
 						   GFP_KERNEL);
-		if (!event->addr_filters_offs)
+		if (!event->addr_filters_offs) {
+			err = -ENOMEM;
 			goto err_per_task;
+		}
 
 		/* force hw sync on the address filters */
 		event->addr_filters_gen = 1;

tools/include/linux/compiler-gcc.h

@@ -19,3 +19,13 @@
 
 /* &a[0] degrades to a pointer: a different type from an array */
 #define __must_be_array(a)	BUILD_BUG_ON_ZERO(__same_type((a), &(a)[0]))
+
+#define  noinline	__attribute__((noinline))
+
+#define __packed	__attribute__((packed))
+
+#define __noreturn	__attribute__((noreturn))
+
+#define __aligned(x)	__attribute__((aligned(x)))
+#define __printf(a, b)	__attribute__((format(printf, a, b)))
+#define __scanf(a, b)	__attribute__((format(scanf, a, b)))

tools/include/linux/compiler.h

@@ -17,6 +17,10 @@
 # define __always_inline	inline __attribute__((always_inline))
 #endif
 
+#ifndef noinline
+#define noinline
+#endif
+
 /* Are two types/vars the same type (ignoring qualifiers)? */
 #ifndef __same_type
 # define __same_type(a, b) __builtin_types_compatible_p(typeof(a), typeof(b))

tools/include/linux/kernel.h

@@ -5,6 +5,8 @@
 #include <stddef.h>
 #include <assert.h>
 #include <linux/compiler.h>
+#include <endian.h>
+#include <byteswap.h>
 
 #ifndef UINT_MAX
 #define UINT_MAX	(~0U)
@@ -68,12 +70,33 @@
 #endif
 #endif
 
-/*
- * Both need more care to handle endianness
- * (Don't use bitmap_copy_le() for now)
- */
-#define cpu_to_le64(x)	(x)
-#define cpu_to_le32(x)	(x)
+#if __BYTE_ORDER == __BIG_ENDIAN
+#define cpu_to_le16 bswap_16
+#define cpu_to_le32 bswap_32
+#define cpu_to_le64 bswap_64
+#define le16_to_cpu bswap_16
+#define le32_to_cpu bswap_32
+#define le64_to_cpu bswap_64
+#define cpu_to_be16
+#define cpu_to_be32
+#define cpu_to_be64
+#define be16_to_cpu
+#define be32_to_cpu
+#define be64_to_cpu
+#else
+#define cpu_to_le16
+#define cpu_to_le32
+#define cpu_to_le64
+#define le16_to_cpu
+#define le32_to_cpu
+#define le64_to_cpu
+#define cpu_to_be16 bswap_16
+#define cpu_to_be32 bswap_32
+#define cpu_to_be64 bswap_64
+#define be16_to_cpu bswap_16
+#define be32_to_cpu bswap_32
+#define be64_to_cpu bswap_64
+#endif
 
 int vscnprintf(char *buf, size_t size, const char *fmt, va_list args);
 int scnprintf(char * buf, size_t size, const char * fmt, ...);

tools/lib/api/fs/fs.c

@@ -387,6 +387,22 @@ int filename__read_str(const char *filename, char **buf, size_t *sizep)
 	return err;
 }
 
+int filename__write_int(const char *filename, int value)
+{
+	int fd = open(filename, O_WRONLY), err = -1;
+	char buf[64];
+
+	if (fd < 0)
+		return err;
+
+	sprintf(buf, "%d", value);
+	if (write(fd, buf, sizeof(buf)) == sizeof(buf))
+		err = 0;
+
+	close(fd);
+	return err;
+}
+
 int procfs__read_str(const char *entry, char **buf, size_t *sizep)
 {
 	char path[PATH_MAX];
@@ -480,3 +496,17 @@ int sysctl__read_int(const char *sysctl, int *value)
 
 	return filename__read_int(path, value);
 }
+
+int sysfs__write_int(const char *entry, int value)
+{
+	char path[PATH_MAX];
+	const char *sysfs = sysfs__mountpoint();
+
+	if (!sysfs)
+		return -1;
+
+	if (snprintf(path, sizeof(path), "%s/%s", sysfs, entry) >= PATH_MAX)
+		return -1;
+
+	return filename__write_int(path, value);
+}

tools/lib/api/fs/fs.h

@@ -31,6 +31,8 @@ int filename__read_int(const char *filename, int *value);
 int filename__read_ull(const char *filename, unsigned long long *value);
 int filename__read_str(const char *filename, char **buf, size_t *sizep);
 
+int filename__write_int(const char *filename, int value);
+
 int procfs__read_str(const char *entry, char **buf, size_t *sizep);
 
 int sysctl__read_int(const char *sysctl, int *value);
@@ -38,4 +40,6 @@ int sysfs__read_int(const char *entry, int *value);
 int sysfs__read_ull(const char *entry, unsigned long long *value);
 int sysfs__read_str(const char *entry, char **buf, size_t *sizep);
 int sysfs__read_bool(const char *entry, bool *value);
+
+int sysfs__write_int(const char *entry, int value);
 #endif /* __API_FS__ */

tools/objtool/arch/x86/insn/x86-opcode-map.txt

@@ -1009,7 +1009,7 @@ GrpTable: Grp15
 1: fxstor | RDGSBASE Ry (F3),(11B)
 2: vldmxcsr Md (v1) | WRFSBASE Ry (F3),(11B)
 3: vstmxcsr Md (v1) | WRGSBASE Ry (F3),(11B)
-4: XSAVE
+4: XSAVE | ptwrite Ey (F3),(11B)
 5: XRSTOR | lfence (11B)
 6: XSAVEOPT | clwb (66) | mfence (11B)
 7: clflush | clflushopt (66) | sfence (11B)

tools/perf/Documentation/intel-pt.txt

@@ -108,6 +108,9 @@ approach is available to export the data to a postgresql database.  Refer to
 script export-to-postgresql.py for more details, and to script
 call-graph-from-postgresql.py for an example of using the database.
 
+There is also script intel-pt-events.py which provides an example of how to
+unpack the raw data for power events and PTWRITE.
+
 As mentioned above, it is easy to capture too much data.  One way to limit the
 data captured is to use 'snapshot' mode which is explained further below.
 Refer to 'new snapshot option' and 'Intel PT modes of operation' further below.
@@ -364,6 +367,42 @@ cyc_thresh	Specifies how frequently CYC packets are produced - see cyc
 
 		CYC packets are not requested by default.
 
+pt		Specifies pass-through which enables the 'branch' config term.
+
+		The default config selects 'pt' if it is available, so a user will
+		never need to specify this term.
+
+branch		Enable branch tracing.  Branch tracing is enabled by default so to
+		disable branch tracing use 'branch=0'.
+
+		The default config selects 'branch' if it is available.
+
+ptw		Enable PTWRITE packets which are produced when a ptwrite instruction
+		is executed.
+
+		Support for this feature is indicated by:
+
+			/sys/bus/event_source/devices/intel_pt/caps/ptwrite
+
+		which contains "1" if the feature is supported and
+		"0" otherwise.
+
+fup_on_ptw	Enable a FUP packet to follow the PTWRITE packet.  The FUP packet
+		provides the address of the ptwrite instruction.  In the absence of
+		fup_on_ptw, the decoder will use the address of the previous branch
+		if branch tracing is enabled, otherwise the address will be zero.
+		Note that fup_on_ptw will work even when branch tracing is disabled.
+
+pwr_evt		Enable power events.  The power events provide information about
+		changes to the CPU C-state.
+
+		Support for this feature is indicated by:
+
+			/sys/bus/event_source/devices/intel_pt/caps/power_event_trace
+
+		which contains "1" if the feature is supported and
+		"0" otherwise.
+
 
 new snapshot option
 -------------------
@@ -674,13 +713,15 @@ Having no option is the same as
 
 which, in turn, is the same as
 
-	--itrace=ibxe
+	--itrace=ibxwpe
 
 The letters are:
 
 	i	synthesize "instructions" events
 	b	synthesize "branches" events
 	x	synthesize "transactions" events
+	w	synthesize "ptwrite" events
+	p	synthesize "power" events
 	c	synthesize branches events (calls only)
 	r	synthesize branches events (returns only)
 	e	synthesize tracing error events
@@ -699,7 +740,40 @@ and "r" can be combined to get calls and returns.
 'flags' field can be used in perf script to determine whether the event is a
 tranasaction start, commit or abort.
 
-Error events are new.  They show where the decoder lost the trace.  Error events
+Note that "instructions", "branches" and "transactions" events depend on code
+flow packets which can be disabled by using the config term "branch=0".  Refer
+to the config terms section above.
+
+"ptwrite" events record the payload of the ptwrite instruction and whether
+"fup_on_ptw" was used.  "ptwrite" events depend on PTWRITE packets which are
+recorded only if the "ptw" config term was used.  Refer to the config terms
+section above.  perf script "synth" field displays "ptwrite" information like
+this: "ip: 0 payload: 0x123456789abcdef0"  where "ip" is 1 if "fup_on_ptw" was
+used.
+
+"Power" events correspond to power event packets and CBR (core-to-bus ratio)
+packets.  While CBR packets are always recorded when tracing is enabled, power
+event packets are recorded only if the "pwr_evt" config term was used.  Refer to
+the config terms section above.  The power events record information about
+C-state changes, whereas CBR is indicative of CPU frequency.  perf script
+"event,synth" fields display information like this:
+	cbr:  cbr: 22 freq: 2189 MHz (200%)
+	mwait:  hints: 0x60 extensions: 0x1
+	pwre:  hw: 0 cstate: 2 sub-cstate: 0
+	exstop:  ip: 1
+	pwrx:  deepest cstate: 2 last cstate: 2 wake reason: 0x4
+Where:
+	"cbr" includes the frequency and the percentage of maximum non-turbo
+	"mwait" shows mwait hints and extensions
+	"pwre" shows C-state transitions (to a C-state deeper than C0) and
+	whether	initiated by hardware
+	"exstop" indicates execution stopped and whether the IP was recorded
+	exactly,
+	"pwrx" indicates return to C0
+For more details refer to the Intel 64 and IA-32 Architectures Software
+Developer Manuals.
+
+Error events show where the decoder lost the trace.  Error events
 are quite important.  Users must know if what they are seeing is a complete
 picture or not.
 

tools/perf/Documentation/itrace.txt

@@ -3,13 +3,15 @@
 		c	synthesize branches events (calls only)
 		r	synthesize branches events (returns only)
 		x	synthesize transactions events
+		w	synthesize ptwrite events
+		p	synthesize power events
 		e	synthesize error events
 		d	create a debug log
 		g	synthesize a call chain (use with i or x)
 		l	synthesize last branch entries (use with i or x)
 		s       skip initial number of events
 
-	The default is all events i.e. the same as --itrace=ibxe
+	The default is all events i.e. the same as --itrace=ibxwpe
 
 	In addition, the period (default 100000) for instructions events
 	can be specified in units of:
@@ -26,8 +28,8 @@
 	Also the number of last branch entries (default 64, max. 1024) for
 	instructions or transactions events can be specified.
 
-	It is also possible to skip events generated (instructions, branches, transactions)
-	at the beginning. This is useful to ignore initialization code.
+	It is also possible to skip events generated (instructions, branches, transactions,
+	ptwrite, power) at the beginning. This is useful to ignore initialization code.
 
 	--itrace=i0nss1000000
 

tools/perf/Documentation/perf-ftrace.txt

@@ -48,6 +48,39 @@ OPTIONS
 	Ranges of CPUs are specified with -: 0-2.
 	Default is to trace on all online CPUs.
 
+-T::
+--trace-funcs=::
+	Only trace functions given by the argument.  Multiple functions
+	can be given by using this option more than once.  The function
+	argument also can be a glob pattern.  It will be passed to
+	'set_ftrace_filter' in tracefs.
+
+-N::
+--notrace-funcs=::
+	Do not trace functions given by the argument.  Like -T option,
+	this can be used more than once to specify multiple functions
+	(or glob patterns).  It will be passed to 'set_ftrace_notrace'
+	in tracefs.
+
+-G::
+--graph-funcs=::
+	Set graph filter on the given function (or a glob pattern).
+	This is useful for the function_graph tracer only and enables
+	tracing for functions executed from the given function.
+	This can be used more than once to specify multiple functions.
+	It will be passed to 'set_graph_function' in tracefs.
+
+-g::
+--nograph-funcs=::
+	Set graph notrace filter on the given function (or a glob pattern).
+	Like -G option, this is useful for the function_graph tracer only
+	and disables tracing for function executed from the given function.
+	This can be used more than once to specify multiple functions.
+	It will be passed to 'set_graph_notrace' in tracefs.
+
+-D::
+--graph-depth=::
+	Set max depth for function graph tracer to follow
 
 SEE ALSO
 --------

tools/perf/Documentation/perf-script.txt

@@ -116,8 +116,9 @@ OPTIONS
 --fields::
         Comma separated list of fields to print. Options are:
         comm, tid, pid, time, cpu, event, trace, ip, sym, dso, addr, symoff,
-        srcline, period, iregs, brstack, brstacksym, flags, bpf-output, brstackinsn,
-        callindent, insn, insnlen. Field list can be prepended with the type, trace, sw or hw,
+        srcline, period, iregs, brstack, brstacksym, flags, bpf-output, brstackinsn, brstackoff,
+        callindent, insn, insnlen, synth.
+        Field list can be prepended with the type, trace, sw or hw,
         to indicate to which event type the field list applies.
         e.g., -F sw:comm,tid,time,ip,sym  and -F trace:time,cpu,trace
 
@@ -130,6 +131,14 @@ OPTIONS
 	i.e., the specified fields apply to all event types if the type string
 	is not given.
 
+	In addition to overriding fields, it is also possible to add or remove
+	fields from the defaults. For example
+
+		-F -cpu,+insn
+
+	removes the cpu field and adds the insn field. Adding/removing fields
+	cannot be mixed with normal overriding.
+
 	The arguments are processed in the order received. A later usage can
 	reset a prior request. e.g.:
 
@@ -185,6 +194,9 @@ OPTIONS
 	instruction bytes and the instruction length of the current
 	instruction.
 
+	The synth field is used by synthesized events which may be created when
+	Instruction Trace decoding.
+
 	Finally, a user may not set fields to none for all event types.
 	i.e., -F "" is not allowed.
 
@@ -203,6 +215,8 @@ OPTIONS
 	is printed. This is the full execution path leading to the sample. This is only supported when the
 	sample was recorded with perf record -b or -j any.
 
+	The brstackoff field will print an offset into a specific dso/binary.
+
 -k::
 --vmlinux=<file>::
         vmlinux pathname

tools/perf/Documentation/perf-stat.txt

@@ -239,6 +239,20 @@ taskset.
 --no-merge::
 Do not merge results from same PMUs.
 
+--smi-cost::
+Measure SMI cost if msr/aperf/ and msr/smi/ events are supported.
+
+During the measurement, the /sys/device/cpu/freeze_on_smi will be set to
+freeze core counters on SMI.
+The aperf counter will not be effected by the setting.
+The cost of SMI can be measured by (aperf - unhalted core cycles).
+
+In practice, the percentages of SMI cycles is very useful for performance
+oriented analysis. --metric_only will be applied by default.
+The output is SMI cycles%, equals to (aperf - unhalted core cycles) / aperf
+
+Users who wants to get the actual value can apply --no-metric-only.
+
 EXAMPLES
 --------
 

tools/perf/Makefile.config

@@ -61,7 +61,7 @@ endif
 # Disable it on all other architectures in case libdw unwind
 # support is detected in system. Add supported architectures
 # to the check.
-ifneq ($(SRCARCH),$(filter $(SRCARCH),x86 arm))
+ifneq ($(SRCARCH),$(filter $(SRCARCH),x86 arm powerpc))
   NO_LIBDW_DWARF_UNWIND := 1
 endif
 

tools/perf/arch/arm/util/cs-etm.c

@@ -17,6 +17,7 @@
 
 #include <api/fs/fs.h>
 #include <linux/bitops.h>
+#include <linux/compiler.h>
 #include <linux/coresight-pmu.h>
 #include <linux/kernel.h>
 #include <linux/log2.h>
@@ -202,19 +203,18 @@ static int cs_etm_recording_options(struct auxtrace_record *itr,
 		pr_debug2("%s snapshot size: %zu\n", CORESIGHT_ETM_PMU_NAME,
 			  opts->auxtrace_snapshot_size);
 
-	if (cs_etm_evsel) {
-		/*
-		 * To obtain the auxtrace buffer file descriptor, the auxtrace
-		 * event must come first.
-		 */
-		perf_evlist__to_front(evlist, cs_etm_evsel);
-		/*
-		 * In the case of per-cpu mmaps, we need the CPU on the
-		 * AUX event.
-		 */
-		if (!cpu_map__empty(cpus))
-			perf_evsel__set_sample_bit(cs_etm_evsel, CPU);
-	}
+	/*
+	 * To obtain the auxtrace buffer file descriptor, the auxtrace
+	 * event must come first.
+	 */
+	perf_evlist__to_front(evlist, cs_etm_evsel);
+
+	/*
+	 * In the case of per-cpu mmaps, we need the CPU on the
+	 * AUX event.
+	 */
+	if (!cpu_map__empty(cpus))
+		perf_evsel__set_sample_bit(cs_etm_evsel, CPU);
 
 	/* Add dummy event to keep tracking */
 	if (opts->full_auxtrace) {
@@ -583,8 +583,7 @@ static FILE *cs_device__open_file(const char *name)
 
 }
 
-static __attribute__((format(printf, 2, 3)))
-int cs_device__print_file(const char *name, const char *fmt, ...)
+static int __printf(2, 3) cs_device__print_file(const char *name, const char *fmt, ...)
 {
 	va_list args;
 	FILE *file;