Merge tag 'usb-4.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
 "Here's a round of USB fixes for 4.0-rc3.

  Nothing major, the usual gadget, xhci and usb-serial fixes and a few
  new device ids as well.

  All have been in linux-next successfully"

* tag 'usb-4.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (36 commits)
  xhci: Workaround for PME stuck issues in Intel xhci
  xhci: fix reporting of 0-sized URBs in control endpoint
  usb: ftdi_sio: Add jtag quirk support for Cyber Cortex AV boards
  USB: ch341: set tty baud speed according to tty struct
  USB: serial: cp210x: Adding Seletek device id's
  USB: pl2303: disable break on shutdown
  USB: mxuport: fix null deref when used as a console
  USB: serial: clean up bus probe error handling
  USB: serial: fix port attribute-creation race
  USB: serial: fix tty-device error handling at probe
  USB: serial: fix potential use-after-free after failed probe
  USB: console: add dummy __module_get
  USB: ftdi_sio: add PIDs for Actisense USB devices
  Revert "USB: serial: make bulk_out_size a lower limit"
  cdc-acm: Add support for Denso cradle CU-321
  usb-storage: support for more than 8 LUNs
  uas: Add US_FL_NO_REPORT_OPCODES for JMicron JMS539
  USB: usbfs: don't leak kernel data in siginfo
  xhci: Clear the host side toggle manually when endpoint is 'soft reset'
  xhci: Allocate correct amount of scratchpad buffers
  ...

drivers/usb/class/cdc-acm.c

@@ -1650,6 +1650,8 @@ static int acm_reset_resume(struct usb_interface *intf)
 
 static const struct usb_device_id acm_ids[] = {
 	/* quirky and broken devices */
+	{ USB_DEVICE(0x076d, 0x0006), /* Denso Cradle CU-321 */
+	.driver_info = NO_UNION_NORMAL, },/* has no union descriptor */
 	{ USB_DEVICE(0x17ef, 0x7000), /* Lenovo USB modem */
 	.driver_info = NO_UNION_NORMAL, },/* has no union descriptor */
 	{ USB_DEVICE(0x0870, 0x0001), /* Metricom GS Modem */

drivers/usb/core/devio.c

@@ -501,6 +501,7 @@ static void async_completed(struct urb *urb)
 	as->status = urb->status;
 	signr = as->signr;
 	if (signr) {
+		memset(&sinfo, 0, sizeof(sinfo));
 		sinfo.si_signo = as->signr;
 		sinfo.si_errno = as->status;
 		sinfo.si_code = SI_ASYNCIO;
@@ -2382,6 +2383,7 @@ static void usbdev_remove(struct usb_device *udev)
 		wake_up_all(&ps->wait);
 		list_del_init(&ps->list);
 		if (ps->discsignr) {
+			memset(&sinfo, 0, sizeof(sinfo));
 			sinfo.si_signo = ps->discsignr;
 			sinfo.si_errno = EPIPE;
 			sinfo.si_code = SI_ASYNCIO;

drivers/usb/dwc3/dwc3-omap.c

@@ -205,6 +205,18 @@ static void dwc3_omap_write_irq0_set(struct dwc3_omap *omap, u32 value)
 						omap->irq0_offset, value);
 }
 
+static void dwc3_omap_write_irqmisc_clr(struct dwc3_omap *omap, u32 value)
+{
+	dwc3_omap_writel(omap->base, USBOTGSS_IRQENABLE_CLR_MISC +
+						omap->irqmisc_offset, value);
+}
+
+static void dwc3_omap_write_irq0_clr(struct dwc3_omap *omap, u32 value)
+{
+	dwc3_omap_writel(omap->base, USBOTGSS_IRQENABLE_CLR_0 -
+						omap->irq0_offset, value);
+}
+
 static void dwc3_omap_set_mailbox(struct dwc3_omap *omap,
 	enum omap_dwc3_vbus_id_status status)
 {
@@ -345,9 +357,23 @@ static void dwc3_omap_enable_irqs(struct dwc3_omap *omap)
 
 static void dwc3_omap_disable_irqs(struct dwc3_omap *omap)
 {
+	u32			reg;
+
 	/* disable all IRQs */
-	dwc3_omap_write_irqmisc_set(omap, 0x00);
-	dwc3_omap_write_irq0_set(omap, 0x00);
+	reg = USBOTGSS_IRQO_COREIRQ_ST;
+	dwc3_omap_write_irq0_clr(omap, reg);
+
+	reg = (USBOTGSS_IRQMISC_OEVT |
+			USBOTGSS_IRQMISC_DRVVBUS_RISE |
+			USBOTGSS_IRQMISC_CHRGVBUS_RISE |
+			USBOTGSS_IRQMISC_DISCHRGVBUS_RISE |
+			USBOTGSS_IRQMISC_IDPULLUP_RISE |
+			USBOTGSS_IRQMISC_DRVVBUS_FALL |
+			USBOTGSS_IRQMISC_CHRGVBUS_FALL |
+			USBOTGSS_IRQMISC_DISCHRGVBUS_FALL |
+			USBOTGSS_IRQMISC_IDPULLUP_FALL);
+
+	dwc3_omap_write_irqmisc_clr(omap, reg);
 }
 
 static u64 dwc3_omap_dma_mask = DMA_BIT_MASK(32);

drivers/usb/gadget/configfs.c

@@ -1161,7 +1161,6 @@ static ssize_t interf_grp_compatible_id_store(struct usb_os_desc *desc,
 	if (desc->opts_mutex)
 		mutex_lock(desc->opts_mutex);
 	memcpy(desc->ext_compat_id, page, l);
-	desc->ext_compat_id[l] = '\0';
 
 	if (desc->opts_mutex)
 		mutex_unlock(desc->opts_mutex);
@@ -1192,7 +1191,6 @@ static ssize_t interf_grp_sub_compatible_id_store(struct usb_os_desc *desc,
 	if (desc->opts_mutex)
 		mutex_lock(desc->opts_mutex);
 	memcpy(desc->ext_compat_id + 8, page, l);
-	desc->ext_compat_id[l + 8] = '\0';
 
 	if (desc->opts_mutex)
 		mutex_unlock(desc->opts_mutex);

drivers/usb/gadget/function/f_hid.c

@@ -569,7 +569,7 @@ fail:
 	return status;
 }
 
-const struct file_operations f_hidg_fops = {
+static const struct file_operations f_hidg_fops = {
 	.owner		= THIS_MODULE,
 	.open		= f_hidg_open,
 	.release	= f_hidg_release,

drivers/usb/gadget/function/f_phonet.c

@@ -417,7 +417,10 @@ static int pn_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
 			return -EINVAL;
 
 		spin_lock(&port->lock);
-		__pn_reset(f);
+
+		if (fp->in_ep->driver_data)
+			__pn_reset(f);
+
 		if (alt == 1) {
 			int i;
 

drivers/usb/gadget/function/f_sourcesink.c

@@ -344,7 +344,7 @@ static struct usb_endpoint_descriptor ss_int_source_desc = {
 	.bInterval =		USB_MS_TO_SS_INTERVAL(GZERO_INT_INTERVAL),
 };
 
-struct usb_ss_ep_comp_descriptor ss_int_source_comp_desc = {
+static struct usb_ss_ep_comp_descriptor ss_int_source_comp_desc = {
 	.bLength =		USB_DT_SS_EP_COMP_SIZE,
 	.bDescriptorType =	USB_DT_SS_ENDPOINT_COMP,
 
@@ -362,7 +362,7 @@ static struct usb_endpoint_descriptor ss_int_sink_desc = {
 	.bInterval =		USB_MS_TO_SS_INTERVAL(GZERO_INT_INTERVAL),
 };
 
-struct usb_ss_ep_comp_descriptor ss_int_sink_comp_desc = {
+static struct usb_ss_ep_comp_descriptor ss_int_sink_comp_desc = {
 	.bLength =		USB_DT_SS_EP_COMP_SIZE,
 	.bDescriptorType =	USB_DT_SS_ENDPOINT_COMP,
 

drivers/usb/gadget/function/f_uac2.c

@@ -54,7 +54,7 @@
 #define UNFLW_CTRL	8
 #define OVFLW_CTRL	10
 
-const char *uac2_name = "snd_uac2";
+static const char *uac2_name = "snd_uac2";
 
 struct uac2_req {
 	struct uac2_rtd_params *pp; /* parent param */
@@ -634,7 +634,7 @@ static struct usb_interface_descriptor std_ac_if_desc = {
 };
 
 /* Clock source for IN traffic */
-struct uac_clock_source_descriptor in_clk_src_desc = {
+static struct uac_clock_source_descriptor in_clk_src_desc = {
 	.bLength = sizeof in_clk_src_desc,
 	.bDescriptorType = USB_DT_CS_INTERFACE,
 
@@ -646,7 +646,7 @@ struct uac_clock_source_descriptor in_clk_src_desc = {
 };
 
 /* Clock source for OUT traffic */
-struct uac_clock_source_descriptor out_clk_src_desc = {
+static struct uac_clock_source_descriptor out_clk_src_desc = {
 	.bLength = sizeof out_clk_src_desc,
 	.bDescriptorType = USB_DT_CS_INTERFACE,
 
@@ -658,7 +658,7 @@ struct uac_clock_source_descriptor out_clk_src_desc = {
 };
 
 /* Input Terminal for USB_OUT */
-struct uac2_input_terminal_descriptor usb_out_it_desc = {
+static struct uac2_input_terminal_descriptor usb_out_it_desc = {
 	.bLength = sizeof usb_out_it_desc,
 	.bDescriptorType = USB_DT_CS_INTERFACE,
 
@@ -672,7 +672,7 @@ struct uac2_input_terminal_descriptor usb_out_it_desc = {
 };
 
 /* Input Terminal for I/O-In */
-struct uac2_input_terminal_descriptor io_in_it_desc = {
+static struct uac2_input_terminal_descriptor io_in_it_desc = {
 	.bLength = sizeof io_in_it_desc,
 	.bDescriptorType = USB_DT_CS_INTERFACE,
 
@@ -686,7 +686,7 @@ struct uac2_input_terminal_descriptor io_in_it_desc = {
 };
 
 /* Ouput Terminal for USB_IN */
-struct uac2_output_terminal_descriptor usb_in_ot_desc = {
+static struct uac2_output_terminal_descriptor usb_in_ot_desc = {
 	.bLength = sizeof usb_in_ot_desc,
 	.bDescriptorType = USB_DT_CS_INTERFACE,
 
@@ -700,7 +700,7 @@ struct uac2_output_terminal_descriptor usb_in_ot_desc = {
 };
 
 /* Ouput Terminal for I/O-Out */
-struct uac2_output_terminal_descriptor io_out_ot_desc = {
+static struct uac2_output_terminal_descriptor io_out_ot_desc = {
 	.bLength = sizeof io_out_ot_desc,
 	.bDescriptorType = USB_DT_CS_INTERFACE,
 
@@ -713,7 +713,7 @@ struct uac2_output_terminal_descriptor io_out_ot_desc = {
 	.bmControls = (CONTROL_RDWR << COPY_CTRL),
 };
 
-struct uac2_ac_header_descriptor ac_hdr_desc = {
+static struct uac2_ac_header_descriptor ac_hdr_desc = {
 	.bLength = sizeof ac_hdr_desc,
 	.bDescriptorType = USB_DT_CS_INTERFACE,
 
@@ -751,7 +751,7 @@ static struct usb_interface_descriptor std_as_out_if1_desc = {
 };
 
 /* Audio Stream OUT Intface Desc */
-struct uac2_as_header_descriptor as_out_hdr_desc = {
+static struct uac2_as_header_descriptor as_out_hdr_desc = {
 	.bLength = sizeof as_out_hdr_desc,
 	.bDescriptorType = USB_DT_CS_INTERFACE,
 
@@ -764,7 +764,7 @@ struct uac2_as_header_descriptor as_out_hdr_desc = {
 };
 
 /* Audio USB_OUT Format */
-struct uac2_format_type_i_descriptor as_out_fmt1_desc = {
+static struct uac2_format_type_i_descriptor as_out_fmt1_desc = {
 	.bLength = sizeof as_out_fmt1_desc,
 	.bDescriptorType = USB_DT_CS_INTERFACE,
 	.bDescriptorSubtype = UAC_FORMAT_TYPE,
@@ -772,7 +772,7 @@ struct uac2_format_type_i_descriptor as_out_fmt1_desc = {
 };
 
 /* STD AS ISO OUT Endpoint */
-struct usb_endpoint_descriptor fs_epout_desc = {
+static struct usb_endpoint_descriptor fs_epout_desc = {
 	.bLength = USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType = USB_DT_ENDPOINT,
 
@@ -782,7 +782,7 @@ struct usb_endpoint_descriptor fs_epout_desc = {
 	.bInterval = 1,
 };
 
-struct usb_endpoint_descriptor hs_epout_desc = {
+static struct usb_endpoint_descriptor hs_epout_desc = {
 	.bLength = USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType = USB_DT_ENDPOINT,
 
@@ -828,7 +828,7 @@ static struct usb_interface_descriptor std_as_in_if1_desc = {
 };
 
 /* Audio Stream IN Intface Desc */
-struct uac2_as_header_descriptor as_in_hdr_desc = {
+static struct uac2_as_header_descriptor as_in_hdr_desc = {
 	.bLength = sizeof as_in_hdr_desc,
 	.bDescriptorType = USB_DT_CS_INTERFACE,
 
@@ -841,7 +841,7 @@ struct uac2_as_header_descriptor as_in_hdr_desc = {
 };
 
 /* Audio USB_IN Format */
-struct uac2_format_type_i_descriptor as_in_fmt1_desc = {
+static struct uac2_format_type_i_descriptor as_in_fmt1_desc = {
 	.bLength = sizeof as_in_fmt1_desc,
 	.bDescriptorType = USB_DT_CS_INTERFACE,
 	.bDescriptorSubtype = UAC_FORMAT_TYPE,
@@ -849,7 +849,7 @@ struct uac2_format_type_i_descriptor as_in_fmt1_desc = {
 };
 
 /* STD AS ISO IN Endpoint */
-struct usb_endpoint_descriptor fs_epin_desc = {
+static struct usb_endpoint_descriptor fs_epin_desc = {
 	.bLength = USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType = USB_DT_ENDPOINT,
 
@@ -859,7 +859,7 @@ struct usb_endpoint_descriptor fs_epin_desc = {
 	.bInterval = 1,
 };
 
-struct usb_endpoint_descriptor hs_epin_desc = {
+static struct usb_endpoint_descriptor hs_epin_desc = {
 	.bLength = USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType = USB_DT_ENDPOINT,
 
@@ -1563,7 +1563,7 @@ static void afunc_unbind(struct usb_configuration *c, struct usb_function *f)
 		agdev->out_ep->driver_data = NULL;
 }
 
-struct usb_function *afunc_alloc(struct usb_function_instance *fi)
+static struct usb_function *afunc_alloc(struct usb_function_instance *fi)
 {
 	struct audio_dev *agdev;
 	struct f_uac2_opts *opts;

drivers/usb/gadget/function/uvc_v4l2.c

@@ -27,6 +27,7 @@
 #include "uvc.h"
 #include "uvc_queue.h"
 #include "uvc_video.h"
+#include "uvc_v4l2.h"
 
 /* --------------------------------------------------------------------------
  * Requests handling

drivers/usb/gadget/function/uvc_video.c

@@ -21,6 +21,7 @@
 
 #include "uvc.h"
 #include "uvc_queue.h"
+#include "uvc_video.h"
 
 /* --------------------------------------------------------------------------
  * Video codecs

drivers/usb/gadget/legacy/g_ffs.c

@@ -133,7 +133,9 @@ struct gfs_configuration {
 	struct usb_configuration c;
 	int (*eth)(struct usb_configuration *c);
 	int num;
-} gfs_configurations[] = {
+};
+
+static struct gfs_configuration gfs_configurations[] = {
 #ifdef CONFIG_USB_FUNCTIONFS_RNDIS
 	{
 		.eth		= bind_rndis_config,
@@ -278,7 +280,7 @@ static void *functionfs_acquire_dev(struct ffs_dev *dev)
 	if (!try_module_get(THIS_MODULE))
 		return ERR_PTR(-ENOENT);
 	
-	return 0;
+	return NULL;
 }
 
 static void functionfs_release_dev(struct ffs_dev *dev)

drivers/usb/host/xhci-pci.c

@@ -37,6 +37,9 @@
 
 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_XHCI	0x8c31
 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI	0x9c31
+#define PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI		0x22b5
+#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_XHCI		0xa12f
+#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI	0x9d2f
 
 static const char hcd_name[] = "xhci_hcd";
 
@@ -133,6 +136,12 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 		pdev->device == PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI) {
 		xhci->quirks |= XHCI_SPURIOUS_REBOOT;
 	}
+	if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
+		(pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI ||
+		 pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_XHCI ||
+		 pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI)) {
+		xhci->quirks |= XHCI_PME_STUCK_QUIRK;
+	}
 	if (pdev->vendor == PCI_VENDOR_ID_ETRON &&
 			pdev->device == PCI_DEVICE_ID_EJ168) {
 		xhci->quirks |= XHCI_RESET_ON_RESUME;
@@ -159,6 +168,21 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 				"QUIRK: Resetting on resume");
 }
 
+/*
+ * Make sure PME works on some Intel xHCI controllers by writing 1 to clear
+ * the Internal PME flag bit in vendor specific PMCTRL register at offset 0x80a4
+ */
+static void xhci_pme_quirk(struct xhci_hcd *xhci)
+{
+	u32 val;
+	void __iomem *reg;
+
+	reg = (void __iomem *) xhci->cap_regs + 0x80a4;
+	val = readl(reg);
+	writel(val | BIT(28), reg);
+	readl(reg);
+}
+
 /* called during probe() after chip reset completes */
 static int xhci_pci_setup(struct usb_hcd *hcd)
 {
@@ -283,6 +307,9 @@ static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
 	if (xhci->quirks & XHCI_COMP_MODE_QUIRK)
 		pdev->no_d3cold = true;
 
+	if (xhci->quirks & XHCI_PME_STUCK_QUIRK)
+		xhci_pme_quirk(xhci);
+
 	return xhci_suspend(xhci, do_wakeup);
 }
 
@@ -313,6 +340,9 @@ static int xhci_pci_resume(struct usb_hcd *hcd, bool hibernated)
 	if (pdev->vendor == PCI_VENDOR_ID_INTEL)
 		usb_enable_intel_xhci_ports(pdev);
 
+	if (xhci->quirks & XHCI_PME_STUCK_QUIRK)
+		xhci_pme_quirk(xhci);
+
 	retval = xhci_resume(xhci, hibernated);
 	return retval;
 }

drivers/usb/host/xhci-plat.c

@@ -83,16 +83,6 @@ static int xhci_plat_probe(struct platform_device *pdev)
 	if (irq < 0)
 		return -ENODEV;
 
-
-	if (of_device_is_compatible(pdev->dev.of_node,
-				    "marvell,armada-375-xhci") ||
-	    of_device_is_compatible(pdev->dev.of_node,
-				    "marvell,armada-380-xhci")) {
-		ret = xhci_mvebu_mbus_init_quirk(pdev);
-		if (ret)
-			return ret;
-	}
-
 	/* Initialize dma_mask and coherent_dma_mask to 32-bits */
 	ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
 	if (ret)
@@ -127,6 +117,15 @@ static int xhci_plat_probe(struct platform_device *pdev)
 			goto put_hcd;
 	}
 
+	if (of_device_is_compatible(pdev->dev.of_node,
+				    "marvell,armada-375-xhci") ||
+	    of_device_is_compatible(pdev->dev.of_node,
+				    "marvell,armada-380-xhci")) {
+		ret = xhci_mvebu_mbus_init_quirk(pdev);
+		if (ret)
+			goto disable_clk;
+	}
+
 	ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
 	if (ret)
 		goto disable_clk;

drivers/usb/host/xhci-ring.c

@@ -1729,7 +1729,7 @@ static void xhci_cleanup_halted_endpoint(struct xhci_hcd *xhci,
 	if (!command)
 		return;
 
-	ep->ep_state |= EP_HALTED;
+	ep->ep_state |= EP_HALTED | EP_RECENTLY_HALTED;
 	ep->stopped_stream = stream_id;
 
 	xhci_queue_reset_ep(xhci, command, slot_id, ep_index);
@@ -1946,7 +1946,7 @@ static int process_ctrl_td(struct xhci_hcd *xhci, struct xhci_td *td,
 	if (event_trb != ep_ring->dequeue) {
 		/* The event was for the status stage */
 		if (event_trb == td->last_trb) {
-			if (td->urb->actual_length != 0) {
+			if (td->urb_length_set) {
 				/* Don't overwrite a previously set error code
 				 */
 				if ((*status == -EINPROGRESS || *status == 0) &&
@@ -1960,7 +1960,13 @@ static int process_ctrl_td(struct xhci_hcd *xhci, struct xhci_td *td,
 					td->urb->transfer_buffer_length;
 			}
 		} else {
-		/* Maybe the event was for the data stage? */
+			/*
+			 * Maybe the event was for the data stage? If so, update
+			 * already the actual_length of the URB and flag it as
+			 * set, so that it is not overwritten in the event for
+			 * the last TRB.
+			 */
+			td->urb_length_set = true;
 			td->urb->actual_length =
 				td->urb->transfer_buffer_length -
 				EVENT_TRB_LEN(le32_to_cpu(event->transfer_len));

drivers/usb/host/xhci.c

@@ -1338,6 +1338,12 @@ int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags)
 		goto exit;
 	}
 
+	/* Reject urb if endpoint is in soft reset, queue must stay empty */
+	if (xhci->devs[slot_id]->eps[ep_index].ep_state & EP_CONFIG_PENDING) {
+		xhci_warn(xhci, "Can't enqueue URB while ep is in soft reset\n");
+		ret = -EINVAL;
+	}
+
 	if (usb_endpoint_xfer_isoc(&urb->ep->desc))
 		size = urb->number_of_packets;
 	else
@@ -2948,23 +2954,36 @@ void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci,
 	}
 }
 
-/* Called when clearing halted device. The core should have sent the control
+/* Called after clearing a halted device. USB core should have sent the control
  * message to clear the device halt condition. The host side of the halt should
- * already be cleared with a reset endpoint command issued when the STALL tx
- * event was received.
- *
- * Context: in_interrupt
+ * already be cleared with a reset endpoint command issued immediately when the
+ * STALL tx event was received.
  */
 
 void xhci_endpoint_reset(struct usb_hcd *hcd,
 		struct usb_host_endpoint *ep)
 {
 	struct xhci_hcd *xhci;
+	struct usb_device *udev;
+	struct xhci_virt_device *virt_dev;
+	struct xhci_virt_ep *virt_ep;
+	struct xhci_input_control_ctx *ctrl_ctx;
+	struct xhci_command *command;
+	unsigned int ep_index, ep_state;
+	unsigned long flags;
+	u32 ep_flag;
 
 	xhci = hcd_to_xhci(hcd);
+	udev = (struct usb_device *) ep->hcpriv;
+	if (!ep->hcpriv)
+		return;
+	virt_dev = xhci->devs[udev->slot_id];
+	ep_index = xhci_get_endpoint_index(&ep->desc);
+	virt_ep = &virt_dev->eps[ep_index];
+	ep_state = virt_ep->ep_state;
 
 	/*
-	 * We might need to implement the config ep cmd in xhci 4.8.1 note:
+	 * Implement the config ep command in xhci 4.6.8 additional note:
 	 * The Reset Endpoint Command may only be issued to endpoints in the
 	 * Halted state. If software wishes reset the Data Toggle or Sequence
 	 * Number of an endpoint that isn't in the Halted state, then software
@@ -2972,9 +2991,72 @@ void xhci_endpoint_reset(struct usb_hcd *hcd,
 	 * for the target endpoint. that is in the Stopped state.
 	 */
 
-	/* For now just print debug to follow the situation */
-	xhci_dbg(xhci, "Endpoint 0x%x ep reset callback called\n",
-		 ep->desc.bEndpointAddress);
+	if (ep_state & SET_DEQ_PENDING || ep_state & EP_RECENTLY_HALTED) {
+		virt_ep->ep_state &= ~EP_RECENTLY_HALTED;
+		xhci_dbg(xhci, "ep recently halted, no toggle reset needed\n");
+		return;
+	}
+
+	/* Only interrupt and bulk ep's use Data toggle, USB2 spec 5.5.4-> */
+	if (usb_endpoint_xfer_control(&ep->desc) ||
+	    usb_endpoint_xfer_isoc(&ep->desc))
+		return;
+
+	ep_flag = xhci_get_endpoint_flag(&ep->desc);
+
+	if (ep_flag == SLOT_FLAG || ep_flag == EP0_FLAG)
+		return;
+
+	command = xhci_alloc_command(xhci, true, true, GFP_NOWAIT);
+	if (!command) {
+		xhci_err(xhci, "Could not allocate xHCI command structure.\n");
+		return;
+	}
+
+	spin_lock_irqsave(&xhci->lock, flags);
+
+	/* block ringing ep doorbell */
+	virt_ep->ep_state |= EP_CONFIG_PENDING;
+
+	/*
+	 * Make sure endpoint ring is empty before resetting the toggle/seq.
+	 * Driver is required to synchronously cancel all transfer request.
+	 *
+	 * xhci 4.6.6 says we can issue a configure endpoint command on a
+	 * running endpoint ring as long as it's idle (queue empty)
+	 */
+
+	if (!list_empty(&virt_ep->ring->td_list)) {
+		dev_err(&udev->dev, "EP not empty, refuse reset\n");
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		goto cleanup;
+	}
+
+	xhci_dbg(xhci, "Reset toggle/seq for slot %d, ep_index: %d\n",
+		 udev->slot_id, ep_index);
+
+	ctrl_ctx = xhci_get_input_control_ctx(command->in_ctx);
+	if (!ctrl_ctx) {
+		xhci_err(xhci, "Could not get input context, bad type. virt_dev: %p, in_ctx %p\n",
+			 virt_dev, virt_dev->in_ctx);
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		goto cleanup;
+	}
+	xhci_setup_input_ctx_for_config_ep(xhci, command->in_ctx,
+					   virt_dev->out_ctx, ctrl_ctx,
+					   ep_flag, ep_flag);
+	xhci_endpoint_copy(xhci, command->in_ctx, virt_dev->out_ctx, ep_index);
+
+	xhci_queue_configure_endpoint(xhci, command, command->in_ctx->dma,
+				     udev->slot_id, false);
+	xhci_ring_cmd_db(xhci);
+	spin_unlock_irqrestore(&xhci->lock, flags);
+
+	wait_for_completion(command->completion);
+
+cleanup:
+	virt_ep->ep_state &= ~EP_CONFIG_PENDING;
+	xhci_free_command(xhci, command);
 }
 
 static int xhci_check_streams_endpoint(struct xhci_hcd *xhci,

drivers/usb/host/xhci.h

@@ -1,3 +1,4 @@
+
 /*
  * xHCI host controller driver
  *
@@ -88,9 +89,10 @@ struct xhci_cap_regs {
 #define HCS_IST(p)		(((p) >> 0) & 0xf)
 /* bits 4:7, max number of Event Ring segments */
 #define HCS_ERST_MAX(p)		(((p) >> 4) & 0xf)
+/* bits 21:25 Hi 5 bits of Scratchpad buffers SW must allocate for the HW */
 /* bit 26 Scratchpad restore - for save/restore HW state - not used yet */
-/* bits 27:31 number of Scratchpad buffers SW must allocate for the HW */
-#define HCS_MAX_SCRATCHPAD(p)   (((p) >> 27) & 0x1f)
+/* bits 27:31 Lo 5 bits of Scratchpad buffers SW must allocate for the HW */
+#define HCS_MAX_SCRATCHPAD(p)   ((((p) >> 16) & 0x3e0) | (((p) >> 27) & 0x1f))
 
 /* HCSPARAMS3 - hcs_params3 - bitmasks */
 /* bits 0:7, Max U1 to U0 latency for the roothub ports */
@@ -863,6 +865,8 @@ struct xhci_virt_ep {
 #define EP_HAS_STREAMS		(1 << 4)
 /* Transitioning the endpoint to not using streams, don't enqueue URBs */
 #define EP_GETTING_NO_STREAMS	(1 << 5)
+#define EP_RECENTLY_HALTED	(1 << 6)
+#define EP_CONFIG_PENDING	(1 << 7)
 	/* ----  Related to URB cancellation ---- */
 	struct list_head	cancelled_td_list;
 	struct xhci_td		*stopped_td;
@@ -1288,6 +1292,8 @@ struct xhci_td {
 	struct xhci_segment	*start_seg;
 	union xhci_trb		*first_trb;
 	union xhci_trb		*last_trb;
+	/* actual_length of the URB has already been set */
+	bool			urb_length_set;
 };
 
 /* xHCI command default timeout value */
@@ -1560,6 +1566,7 @@ struct xhci_hcd {
 #define XHCI_SPURIOUS_WAKEUP	(1 << 18)
 /* For controllers with a broken beyond repair streams implementation */
 #define XHCI_BROKEN_STREAMS	(1 << 19)
+#define XHCI_PME_STUCK_QUIRK	(1 << 20)
 	unsigned int		num_active_eps;
 	unsigned int		limit_active_eps;
 	/* There are two roothubs to keep track of bus suspend info for */

drivers/usb/isp1760/isp1760-hcd.c

@@ -1274,7 +1274,7 @@ static void errata2_function(unsigned long data)
 	for (slot = 0; slot < 32; slot++)
 		if (priv->atl_slots[slot].qh && time_after(jiffies,
 					priv->atl_slots[slot].timestamp +
-					SLOT_TIMEOUT * HZ / 1000)) {
+					msecs_to_jiffies(SLOT_TIMEOUT))) {
 			ptd_read(hcd->regs, ATL_PTD_OFFSET, slot, &ptd);
 			if (!FROM_DW0_VALID(ptd.dw0) &&
 					!FROM_DW3_ACTIVE(ptd.dw3))
@@ -1286,7 +1286,7 @@ static void errata2_function(unsigned long data)
 
 	spin_unlock_irqrestore(&priv->lock, spinflags);
 
-	errata2_timer.expires = jiffies + SLOT_CHECK_PERIOD * HZ / 1000;
+	errata2_timer.expires = jiffies + msecs_to_jiffies(SLOT_CHECK_PERIOD);
 	add_timer(&errata2_timer);
 }
 
@@ -1336,7 +1336,7 @@ static int isp1760_run(struct usb_hcd *hcd)
 		return retval;
 
 	setup_timer(&errata2_timer, errata2_function, (unsigned long)hcd);
-	errata2_timer.expires = jiffies + SLOT_CHECK_PERIOD * HZ / 1000;
+	errata2_timer.expires = jiffies + msecs_to_jiffies(SLOT_CHECK_PERIOD);
 	add_timer(&errata2_timer);
 
 	chipid = reg_read32(hcd->regs, HC_CHIP_ID_REG);

drivers/usb/musb/musb_core.c

@@ -1969,10 +1969,6 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
 		goto fail0;
 	}
 
-	pm_runtime_use_autosuspend(musb->controller);
-	pm_runtime_set_autosuspend_delay(musb->controller, 200);
-	pm_runtime_enable(musb->controller);
-
 	spin_lock_init(&musb->lock);
 	musb->board_set_power = plat->set_power;
 	musb->min_power = plat->min_power;
@@ -1991,6 +1987,12 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
 	musb_readl = musb_default_readl;
 	musb_writel = musb_default_writel;
 
+	/* We need musb_read/write functions initialized for PM */
+	pm_runtime_use_autosuspend(musb->controller);
+	pm_runtime_set_autosuspend_delay(musb->controller, 200);
+	pm_runtime_irq_safe(musb->controller);
+	pm_runtime_enable(musb->controller);
+
 	/* The musb_platform_init() call:
 	 *   - adjusts musb->mregs
 	 *   - sets the musb->isr

drivers/usb/musb/musb_dsps.c

@@ -457,12 +457,27 @@ static int dsps_musb_init(struct musb *musb)
 	if (IS_ERR(musb->xceiv))
 		return PTR_ERR(musb->xceiv);
 
+	musb->phy = devm_phy_get(dev->parent, "usb2-phy");
+
 	/* Returns zero if e.g. not clocked */
 	rev = dsps_readl(reg_base, wrp->revision);
 	if (!rev)
 		return -ENODEV;
 
 	usb_phy_init(musb->xceiv);
+	if (IS_ERR(musb->phy))  {
+		musb->phy = NULL;
+	} else {
+		ret = phy_init(musb->phy);
+		if (ret < 0)
+			return ret;
+		ret = phy_power_on(musb->phy);
+		if (ret) {
+			phy_exit(musb->phy);
+			return ret;
+		}
+	}
+
 	setup_timer(&glue->timer, otg_timer, (unsigned long) musb);
 
 	/* Reset the musb */
@@ -502,6 +517,8 @@ static int dsps_musb_exit(struct musb *musb)
 
 	del_timer_sync(&glue->timer);
 	usb_phy_shutdown(musb->xceiv);
+	phy_power_off(musb->phy);
+	phy_exit(musb->phy);
 	debugfs_remove_recursive(glue->dbgfs_root);
 
 	return 0;
@@ -610,7 +627,7 @@ static int dsps_musb_reset(struct musb *musb)
 	struct device *dev = musb->controller;
 	struct dsps_glue *glue = dev_get_drvdata(dev->parent);
 	const struct dsps_musb_wrapper *wrp = glue->wrp;
-	int session_restart = 0;
+	int session_restart = 0, error;
 
 	if (glue->sw_babble_enabled)
 		session_restart = sw_babble_control(musb);
@@ -624,8 +641,14 @@ static int dsps_musb_reset(struct musb *musb)
 		dsps_writel(musb->ctrl_base, wrp->control, (1 << wrp->reset));
 		usleep_range(100, 200);
 		usb_phy_shutdown(musb->xceiv);
+		error = phy_power_off(musb->phy);
+		if (error)
+			dev_err(dev, "phy shutdown failed: %i\n", error);
 		usleep_range(100, 200);
 		usb_phy_init(musb->xceiv);
+		error = phy_power_on(musb->phy);
+		if (error)
+			dev_err(dev, "phy powerup failed: %i\n", error);
 		session_restart = 1;
 	}
 
@@ -687,7 +710,7 @@ static int dsps_create_musb_pdev(struct dsps_glue *glue,
 	struct musb_hdrc_config	*config;
 	struct platform_device *musb;
 	struct device_node *dn = parent->dev.of_node;
-	int ret;
+	int ret, val;
 
 	memset(resources, 0, sizeof(resources));
 	res = platform_get_resource_byname(parent, IORESOURCE_MEM, "mc");
@@ -739,7 +762,10 @@ static int dsps_create_musb_pdev(struct dsps_glue *glue,
 	pdata.mode = get_musb_port_mode(dev);
 	/* DT keeps this entry in mA, musb expects it as per USB spec */
 	pdata.power = get_int_prop(dn, "mentor,power") / 2;
-	config->multipoint = of_property_read_bool(dn, "mentor,multipoint");
+
+	ret = of_property_read_u32(dn, "mentor,multipoint", &val);
+	if (!ret && val)
+		config->multipoint = true;
 
 	ret = platform_device_add_data(musb, &pdata, sizeof(pdata));
 	if (ret) {

drivers/usb/musb/musb_host.c

@@ -2613,7 +2613,7 @@ static const struct hc_driver musb_hc_driver = {
 	.description		= "musb-hcd",
 	.product_desc		= "MUSB HDRC host driver",
 	.hcd_priv_size		= sizeof(struct musb *),
-	.flags			= HCD_USB2 | HCD_MEMORY,
+	.flags			= HCD_USB2 | HCD_MEMORY | HCD_BH,
 
 	/* not using irq handler or reset hooks from usbcore, since
 	 * those must be shared with peripheral code for OTG configs