rfidrig/ChameleonUltra
0
0
Fork 0
mirror of https://github.com/RfidResearchGroup/ChameleonUltra.git synced 2026-05-12 11:22:59 -07:00
Code Issues Packages Projects Releases Wiki Activity

Add animation modes support

Browse Source
This commit is contained in:
Dominik Szymański
2023-08-10 22:26:22 +02:00
parent c197a0ff05
commit f30ff7054c
15 changed files with 257 additions and 42 deletions
Download Patch File Download Diff File Expand all files Collapse all files
.gitignore
+3 -1
View File
@@ -1,3 +1,5 @@
.idea/
.vscode/
.vs/
.vs/
.DS_Store
firmware/application/Makefile
+1
View File
@@ -11,6 +11,7 @@ SRC_FILES += \
$(PROJ_DIR)/app_cmd.c \
$(PROJ_DIR)/ble_main.c \
$(PROJ_DIR)/rfid_main.c \
$(PROJ_DIR)/settings.c \
$(PROJ_DIR)/usb_main.c \
$(PROJ_DIR)/rgb_marquee.c \
$(PROJ_DIR)/bsp/bsp_delay.c \
firmware/application/src/app_cmd.c
+24
View File
@@ -12,6 +12,7 @@
#include "app_status.h"
#include "tag_persistence.h"
#include "nrf_pwr_mgmt.h"
#include "settings.h"
#define NRF_LOG_MODULE_NAME app_cmd
@@ -80,6 +81,26 @@ data_frame_tx_t* cmd_processor_get_device_address(uint16_t cmd, uint16_t status,
return data_frame_make(cmd, STATUS_DEVICE_SUCCESS, 6, (uint8_t*)(&device_address[0]));
}
data_frame_tx_t* cmd_processor_save_settings(uint16_t cmd, uint16_t status, uint16_t length, uint8_t *data) {
status = settings_save_config();
return data_frame_make(cmd, status, 0, NULL);
}
data_frame_tx_t* cmd_processor_set_animation_mode(uint16_t cmd, uint16_t status, uint16_t length, uint8_t *data) {
if (length == 1) {
settings_set_animation_config(data[0]);
}
else {
status = STATUS_PAR_ERR;
}
return data_frame_make(cmd, status, 0, NULL);
}
data_frame_tx_t* cmd_processor_get_animation_mode(uint16_t cmd, uint16_t status, uint16_t length, uint8_t *data) {
uint8_t animation_mode = settings_get_animation_config();
return data_frame_make(cmd, STATUS_DEVICE_SUCCESS, 1, (uint8_t *)(&animation_mode));
}
#if defined(PROJECT_CHAMELEON_ULTRA)
data_frame_tx_t* cmd_processor_14a_scan(uint16_t cmd, uint16_t status, uint16_t length, uint8_t *data) {
@@ -524,6 +545,9 @@ static cmd_data_map_t m_data_cmd_map[] = {
{ DATA_CMD_ENTER_BOOTLOADER, NULL, cmd_processor_enter_bootloader, NULL },
{ DATA_CMD_GET_DEVICE_CHIP_ID, NULL, cmd_processor_get_device_chip_id, NULL },
{ DATA_CMD_GET_DEVICE_ADDRESS, NULL, cmd_processor_get_device_address, NULL },
{ DATA_CMD_SAVE_SETTINGS, NULL, cmd_processor_save_settings, NULL },
{ DATA_CMD_SET_ANIMATION_MODE, NULL, cmd_processor_set_animation_mode, NULL },
{ DATA_CMD_GET_ANIMATION_MODE, NULL, cmd_processor_get_animation_mode, NULL },
#if defined(PROJECT_CHAMELEON_ULTRA)
firmware/application/src/app_main.c
+37 -19
View File
@@ -36,6 +36,8 @@ NRF_LOG_MODULE_REGISTER();
#include "usb_main.h"
#include "rgb_marquee.h"
#include "settings.h"
// Defining soft timers
APP_TIMER_DEF(m_button_check_timer); // Timer for button debounce
@@ -219,22 +221,25 @@ static void system_off_enter(void) {
for (uint8_t i = 0; i < RGB_LIST_NUM; i++) {
nrf_gpio_pin_clear(p_led_array[i]);
}
uint8_t slot = tag_emulation_get_slot();
// Power off animation
uint8_t dir = slot > 3 ? 1 : 0;
uint8_t color = get_color_by_slot(slot);
if (m_reset_source & (NRF_POWER_RESETREAS_NFC_MASK | NRF_POWER_RESETREAS_LPCOMP_MASK)) {
if (m_reset_source & NRF_POWER_RESETREAS_NFC_MASK) {
color = 1;
} else {
color = 2;
uint8_t animation_config = settings_get_animation_config();
if (animation_config == SETTINGS_ANIMATION_FULL) {
uint8_t slot = tag_emulation_get_slot();
// Power off animation
uint8_t dir = slot > 3 ? 1 : 0;
uint8_t color = get_color_by_slot(slot);
if (m_reset_source & (NRF_POWER_RESETREAS_NFC_MASK | NRF_POWER_RESETREAS_LPCOMP_MASK)) {
if (m_reset_source & NRF_POWER_RESETREAS_NFC_MASK) {
color = 1;
} else {
color = 2;
}
}
ledblink5(color, slot, dir ? 7 : 0);
ledblink4(color, dir, 7, 99, 75);
ledblink4(color, !dir, 7, 75, 50);
ledblink4(color, dir, 7, 50, 25);
ledblink4(color, !dir, 7, 25, 0);
}
ledblink5(color, slot, dir ? 7 : 0);
ledblink4(color, dir, 7, 99, 75);
ledblink4(color, !dir, 7, 75, 50);
ledblink4(color, dir, 7, 50, 25);
ledblink4(color, !dir, 7, 25, 0);
rgb_marquee_stop();
}
@@ -346,9 +351,17 @@ static void check_wakeup_src(void) {
advertising_start(); // Turn on Bluetooth radio
// Button wake-up boot animation
ledblink2(color, !dir, 11);
ledblink2(color, dir, 11);
ledblink2(color, !dir, dir ? slot : 7 - slot);
uint8_t animation_config = settings_get_animation_config();
if (animation_config == SETTINGS_ANIMATION_FULL)
{
ledblink2(color, !dir, 11);
ledblink2(color, dir, 11);
ledblink2(color, !dir, dir ? slot : 7 - slot);
}
else if (animation_config == SETTINGS_ANIMATION_MINIMAL) {
ledblink2(color, !dir, dir ? slot : 7 - slot);
}
// The indicator of the current card slot lights up at the end of the animation
light_up_by_slot();
@@ -374,8 +387,11 @@ static void check_wakeup_src(void) {
// 当前是模拟卡事件唤醒系统，我们可以让场强灯先亮起来
TAG_FIELD_LED_ON();
// In the case of field wake-up, only one round of RGB is swept as the power-on animation
ledblink2(color, !dir, dir ? slot : 7 - slot);
uint8_t animation_config = settings_get_animation_config();
if (animation_config == SETTINGS_ANIMATION_FULL) {
// In the case of field wake-up, only one round of RGB is swept as the power-on animation
ledblink2(color, !dir, dir ? slot : 7 - slot);
}
set_slot_light_color(color);
light_up_by_slot();
@@ -517,6 +533,8 @@ int main(void) {
tag_emulation_init(); // Analog card initialization
rgb_marquee_init(); // Light effect initialization
settings_load_config(); // Load settings from flash
// cmd callback register
on_data_frame_complete(on_data_frame_received);
firmware/application/src/data_cmd.h
+3
View File
@@ -20,6 +20,9 @@
#define DATA_CMD_ENTER_BOOTLOADER (1010)
#define DATA_CMD_GET_DEVICE_CHIP_ID (1011)
#define DATA_CMD_GET_DEVICE_ADDRESS (1012)
#define DATA_CMD_SAVE_SETTINGS (1013)
#define DATA_CMD_SET_ANIMATION_MODE (1014)
#define DATA_CMD_GET_ANIMATION_MODE (1015)
//
// ******************************************************************
firmware/application/src/rfid/nfctag/tag_emulation.c
+1
View File
@@ -3,6 +3,7 @@
#include "lf_tag_em.h"
#include "nfc_mf1.h"
#include "nfc_ntag.h"
#include "fds_ids.h"
#include "fds_util.h"
#include "tag_emulation.h"
#include "tag_persistence.h"
firmware/application/src/rfid/nfctag/tag_persistence.c
+1 -1
View File
@@ -1,5 +1,5 @@
#include "tag_persistence.h"
#include "fds_ids.h"
#define NRF_LOG_MODULE_NAME tag_persistence
#include "nrf_log.h"
firmware/application/src/rfid/nfctag/tag_persistence.h
-21
View File
@@ -5,27 +5,6 @@
#include "tag_base_type.h"
/*
* 卡槽配置，只有一份，一致即可
*/
#define FDS_CONFIG_RECORD_FILE_KEY 0x1066
#define FDS_CONFIG_RECORD_FILE_ID 0x1066
/*
* 每个卡槽有高低频两种数据，其中key是跟卡槽走的，而id+n就等于数据索引，固定某个索引为指定类型即可
* 每个slot的file_key都不一样
* 每个slot有两种类型的卡片，因此有两个数据ID（当前）
*/
#define FDS_SLOT_TAG_DUMP_FILE_KEY 0x1067
#define FDS_SLOT_TAG_DUMP_FILE_ID 0x1067
/*
* 每个卡槽有高低频两种数据，因此卡槽的昵称也要有两种，其中key是跟卡槽走的，而id+n就等于数据索引，固定某个索引为指定类型即可
*/
#define FDS_SLOT_TAG_NICK_NAME_KEY 0x1068
#define FDS_SLOT_TAG_NICK_NAME_ID 0x1068
typedef struct {
uint16_t key;
uint16_t id;
firmware/application/src/settings.c
+63
View File
@@ -0,0 +1,63 @@
#include <stdbool.h>
#include "crc_utils.h"
#include "app_status.h"
#include "settings.h"
#include "fds_ids.h"
#include "fds_util.h"
#define NRF_LOG_MODULE_NAME settings
#include "nrf_log.h"
#include "nrf_log_ctrl.h"
#include "nrf_log_default_backends.h"
NRF_LOG_MODULE_REGISTER();
static settings_data_t config;
static uint16_t m_config_crc;
void settings_load_config(void)
{
bool ret = fds_read_sync(FDS_SETTINGS_ID, FDS_SETTINGS_KEY, sizeof(config), (uint8_t *)&config);
if (ret) {
// After the reading is complete, we first save a copy of the current CRC, which can be used as a reference for comparison of changes when saving later
calc_14a_crc_lut((uint8_t *)&config, sizeof(config), (uint8_t *)&m_config_crc);
NRF_LOG_INFO("Load config done.");
} else {
NRF_LOG_INFO("config no exists.");
}
}
uint8_t settings_save_config(void)
{
// We are saving the configuration, we need to calculate the crc code of the current configuration to judge whether the following data is updated
uint16_t new_calc_crc;
calc_14a_crc_lut((uint8_t *)&config, sizeof(config), (uint8_t *)&new_calc_crc);
if (new_calc_crc != m_config_crc) { // Before saving, make sure that the configuration has changed
NRF_LOG_INFO("Save tag slot config start.");
bool ret = fds_write_sync(FDS_CONFIG_RECORD_FILE_ID, FDS_CONFIG_RECORD_FILE_KEY, sizeof(config) / 4, (uint8_t *)&config);
if (ret) {
NRF_LOG_INFO("Save tag slot config success.");
m_config_crc = new_calc_crc; // store new CRC so we know that we've updated the configuration
}
else
{
NRF_LOG_ERROR("Save tag slot config error.");
return STATUS_FLASH_WRITE_FAIL;
}
} else {
NRF_LOG_INFO("Tag slot config no change.");
}
return STATUS_DEVICE_SUCCESS;
}
uint8_t settings_get_animation_config()
{
return config & 0x3;
}
void settings_set_animation_config(uint8_t value)
{
config &= ~(0x3);
config |= value;
}
firmware/application/src/settings.h
+21
View File
@@ -0,0 +1,21 @@
#ifndef SETTINGS_H
#define SETTINGS_H
#include <stdint.h>
#define SETTINGS_ANIMATION_FULL 0
#define SETTINGS_ANIMATION_MINIMAL 1
#define SETTINGS_ANIMATION_NONE 2
/*
* bits [0-1]: animation config
* bits [2-31]: reserved
*/
typedef uint32_t settings_data_t;
void settings_load_config(void);
uint8_t settings_save_config(void);
uint8_t settings_get_animation_config();
void settings_set_animation_config(uint8_t value);
#endif
firmware/application/src/utils/fds_ids.h
+30
View File
@@ -0,0 +1,30 @@
#ifndef FDS_IDS_H
#define FDS_IDS_H
/*
* 卡槽配置，只有一份，一致即可
*/
#define FDS_CONFIG_RECORD_FILE_KEY 0x1066
#define FDS_CONFIG_RECORD_FILE_ID 0x1066
/*
* 每个卡槽有高低频两种数据，其中key是跟卡槽走的，而id+n就等于数据索引，固定某个索引为指定类型即可
* 每个slot的file_key都不一样
* 每个slot有两种类型的卡片，因此有两个数据ID（当前）
*/
#define FDS_SLOT_TAG_DUMP_FILE_KEY 0x1067
#define FDS_SLOT_TAG_DUMP_FILE_ID 0x1067
/*
* 每个卡槽有高低频两种数据，因此卡槽的昵称也要有两种，其中key是跟卡槽走的，而id+n就等于数据索引，固定某个索引为指定类型即可
*/
#define FDS_SLOT_TAG_NICK_NAME_KEY 0x1068
#define FDS_SLOT_TAG_NICK_NAME_ID 0x1068
/*
* Slot for settings like LED animation mode and future options
*/
#define FDS_SETTINGS_KEY 0x1069
#define FDS_SETTINGS_ID 0x1069
#endif
software/script/chameleon_cli_main.py
+9
View File
@@ -87,6 +87,15 @@ class ChameleonCLI:
'help': "Emulation tag slot.",
},
'dfu': new_uint(chameleon_cli_unit.HWDFU, "Restart application to bootloader mode(Not yet implement dfu)."),
'settings': {
'animation': {
'get': new_uint(chameleon_cli_unit.HWSettingsAnimationGet, "Get current animation mode value"),
'set': new_uint(chameleon_cli_unit.HWSettingsAnimationSet, "Change chameleon animation mode"),
'help': 'Manage wake-up and sleep animation mode'
},
'store': new_uint(chameleon_cli_unit.HWSettingsStore, "Store current settings to flash"),
'help': "Chameleon settings management"
},
'help': "hardware controller",
},
'hf': {
software/script/chameleon_cli_unit.py
+38
View File
@@ -994,3 +994,41 @@ class HWDFU(DeviceRequiredUnit):
print(" - Enter success @.@~")
# let time for comm thread to send dfu cmd and close port
time.sleep(0.1)
class HWSettingsAnimationGet(DeviceRequiredUnit):
def args_parser(self) -> ArgumentParserNoExit or None:
return None
def on_exec(self, args: argparse.Namespace):
resp: chameleon_com.Response = self.cmd_standard.get_settings_animation()
if resp.data[0] == 0:
print("Full animation")
elif resp.data[0] == 1:
print("Minimal animation")
elif resp.data[0] == 2:
print("No animation")
else:
print("Unknown setting value, something failed.")
class HWSettingsAnimationSet(DeviceRequiredUnit):
def args_parser(self) -> ArgumentParserNoExit or None:
parser = ArgumentParserNoExit()
parser.add_argument('-m', '--mode', type=int, required=True, help="0 is full (default), 1 is minimal (only single pass on button wakeup), 2 is none", choices=[0, 1, 2])
return None
def on_exec(self, args: argparse.Namespace):
mode = args.mode
self.cmd_standard.set_settings_animation(mode)
print("Animation mode change success. Do not forget to store your settings in flash!")
class HWSettingsStore(DeviceRequiredUnit):
def args_parser(self) -> ArgumentParserNoExit or None:
return None
def on_exec(self, args: argparse.Namespace):
print("Storing settings...")
resp: chameleon_com.Response = self.cmd_standard.store_settings()
if resp.status == chameleon_status.Device.STATUS_DEVICE_SUCCESS:
print(" - Store success @.@~")
else:
print(" - Store failed")
software/script/chameleon_cmd.py
+22
View File
@@ -20,6 +20,10 @@ DATA_CMD_ENTER_BOOTLOADER = 1010
DATA_CMD_GET_DEVICE_CHIP_ID = 1011
DATA_CMD_GET_DEVICE_ADDRESS = 1012
DATA_CMD_SAVE_SETTINGS = 1013
DATA_CMD_SET_ANIMATION_MODE = 1014
DATA_CMD_GET_ANIMATION_MODE = 1015
DATA_CMD_SCAN_14A_TAG = 2000
DATA_CMD_MF1_SUPPORT_DETECT = 2001
DATA_CMD_MF1_NT_LEVEL_DETECT = 2002
@@ -424,6 +428,24 @@ class BaseChameleonCMD:
:return:
"""
return self.device.send_cmd_auto(DATA_CMD_ENTER_BOOTLOADER, 0x00, close=True)
def get_settings_animation(self):
"""
Get animation mode value
"""
return self.device.send_cmd_sync(DATA_CMD_GET_ANIMATION_MODE, 0x00, None)
def set_settings_animation(self, value: int):
"""
Set animation mode value
"""
return self.device.send_cmd_sync(DATA_CMD_SET_ANIMATION_MODE, 0x00, bytearray([value]))
def store_settings(self):
"""
Store settings to flash memory
"""
return self.device.send_cmd_sync(DATA_CMD_SAVE_SETTINGS, 0x00)
class NegativeResponseError(Exception):
software/script/chameleon_status.py
+4
View File
@@ -41,6 +41,8 @@ class Device(metaclass=MetaDevice):
STATUS_INVALID_CMD = 0x67 # 无效的指令
STATUS_DEVICE_SUCCESS = 0x68 # 设备相关操作成功执行
STATUS_NOT_IMPLEMENTED = 0x69 # 调用了某些未实现的操作，属于开发者遗漏的错误
STATUS_FLASH_WRITE_FAIL = 0x70 # flash写入失败
STATUS_FLASH_READ_FAIL = 0x71 # flash读取失败
message = {
@@ -68,4 +70,6 @@ message = {
Device.STATUS_INVALID_CMD : "API request fail, cmd invalid",
Device.STATUS_DEVICE_SUCCESS : "Device operation succeeded",
Device.STATUS_NOT_IMPLEMENTED : "Some api not implemented",
Device.STATUS_FLASH_WRITE_FAIL : "Flash write failed",
Device.STATUS_FLASH_READ_FAIL : "Flash read failed"
}