print_n_panic/Microtransactions64
0
0
Fork 0
mirror of https://github.com/Print-and-Panic/Microtransactions64.git synced 2026-01-21 10:17:19 -08:00
Code Issues Packages Projects Releases Wiki Activity

make RNC1 default compression

Browse Source
This commit is contained in:
CrashOveride95
2021-07-17 23:52:02 -04:00
parent 0b91eeb6e6
commit 9e9b4dbde8
2 changed files with 13 additions and 11 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
Makefile
View File

@@ -66,7 +66,7 @@ endif
DEFINES += NO_ERRNO_H=1 NO_GZIP=1
COMPRESS ?= yay0
COMPRESS ?= rnc1
$(eval $(call validate-option,COMPRESS,mio0 yay0 gzip rnc1 rnc2 uncomp))
ifeq ($(COMPRESS),gzip)
DEFINES += GZIP=1

22
README.md
View File

@@ -41,7 +41,17 @@ To target iQue, run make with the ``CONSOLE=bb`` argument.
## Compression
The repository supports using DEFLATE compression instead of Nintendo's Yay0. This boasts a better compression ratio, but at a slight cost to load times.
The repo also supports RNC (Rob Northen Compression). RNC has two methods.
Method 1 is designed to compress as small as possible, while method 2 is designed so that decompression is as fast as possible.
Method 1 is the current default, and is the best all-rounder in terms of speed and ratio.
Both methods are fast. Method 1 has better compression than 2, so I suggest using method 1 if using RNC.
To switch to RNC, run make with either ``COMPRESS=rnc1`` or ``COMPRESS=rnc2``, depending on preferred method.
The repository also supports using DEFLATE compression. This boasts a better compression ratio, but at a slight cost to load times.
On average I'd estimate that the bottleneck on decompression is about 1-2 seconds.
@@ -49,18 +59,10 @@ To switch to gzip, run make with the ``COMPRESS=gzip`` argument.
The repo also supports gziping with ``libdeflate-gzip``. This compresses at a slightly better ratio than standard ``gzip``, with no real downside from a decompression standpoint.
To use ``libdeflate-gzip``, first clone the [repo](https://github.com/ebiggers/libdeflate), then make and make install it.
To use ``libdeflate-gzip``, first clone the [repo](https://github.com/ebiggers/libdeflate), then `make` and `make install` it.
Then run make for sm64 with ``GZIPVER=libdef`` in addition to ``COMPRESS=gzip``
The repo also supports RNC (Rob Northen Compression). RNC has two methods.
Method 1 is designed to compress as small as possible, while method 2 is designed so that decompression is as fast as possible.
Both methods are fast. Method 1 has better compression than 2, so I suggest using method 1 if using RNC.
To switch to RNC, run make with either ``COMPRESS=rnc1`` or ``COMPRESS=rnc2``, depending on preferred method.
The repo also supports building a ROM with no compression.
This is not recommended as it increases ROM size significantly, with little point other than load times decreased to almost nothing.