Merge pull request #114 from yenatch/master

Split out files and write comments.

audio/engine.asm

@@ -16,27 +16,27 @@ SoundRestart: ; e8000
 	push bc
 	push af
 	call MusicOff
-	ld hl, $ff24 ; channel control registers
+	ld hl, rNR50 ; channel control registers
 	xor a
-	ld [hli], a ; ff24 ; volume/vin
+	ld [hli], a ; rNR50 ; volume/vin
-	ld [hli], a ; ff25 ; sfx channels
+	ld [hli], a ; rNR51 ; sfx channels
 	ld a, $80 ; all channels on
 	ld [hli], a ; ff26 ; music channels
 
-	ld hl, $ff10 ; sound channel registers
+	ld hl, rNR10 ; sound channel registers
 	ld e, $04 ; number of channels
 .clearsound
 ;   sound channel   1      2      3      4
 	xor a
-	ld [hli], a ; $ff10, $ff15, $ff1a, $ff1f ; sweep = 0
+	ld [hli], a ; rNR10, $ff15, rNR30, $ff1f ; sweep = 0
 
-	ld [hli], a ; $ff11, $ff16, $ff1b, $ff20 ; length/wavepattern = 0
+	ld [hli], a ; rNR11, rNR21, rNR31, rNR41 ; length/wavepattern = 0
 	ld a, $08
-	ld [hli], a ; $ff12, $ff17, $ff1c, $ff21 ; envelope = 0
+	ld [hli], a ; rNR12, rNR22, rNR32, rNR42 ; envelope = 0
 	xor a
-	ld [hli], a ; $ff13, $ff18, $ff1d, $ff22 ; frequency lo = 0
+	ld [hli], a ; rNR13, rNR23, rNR33, rNR43 ; frequency lo = 0
 	ld a, $80
-	ld [hli], a ; $ff14, $ff19, $ff1e, $ff23 ; restart sound (freq hi = 0)
+	ld [hli], a ; rNR14, rNR24, rNR34, rNR44 ; restart sound (freq hi = 0)
 	dec e
 	jr nz, .clearsound
 
@@ -208,10 +208,10 @@ UpdateSound: ; e805c
 	call FadeMusic
 	; write volume to hardware register
 	ld a, [Volume]
-	ld [$ff24], a
+	ld [rNR50], a
 	; write SO on/off to hardware register
 	ld a, [SoundOutput]
-	ld [$ff25], a
+	ld [rNR51], a
 	ret
 ; e8125
 
@@ -251,7 +251,7 @@ UpdateChannels: ; e8125
 	jr z, .asm_e8159
 	;
 	ld a, [SoundInput]
-	ld [$ff10], a
+	ld [rNR10], a
 .asm_e8159
 	bit 5, [hl] ; rest
 	jr nz, .ch1rest
@@ -264,48 +264,48 @@ UpdateChannels: ; e8125
 	jr .asm_e8175
 .asm_e816b
 	ld a, [$c294]
-	ld [$ff13], a
+	ld [rNR13], a
 	ld a, [$c295]
-	ld [$ff14], a
+	ld [rNR14], a
 .asm_e8175
 	bit 0, [hl]
 	ret z
 	ld a, [$c292]
 	ld d, a
-	ld a, [$ff11]
+	ld a, [rNR11]
 	and a, $3f ; sound length
 	or d
-	ld [$ff11], a
+	ld [rNR11], a
 	ret
 .asm_e8184
 	ld a, [$c292]
 	ld d, a
-	ld a, [$ff11]
+	ld a, [rNR11]
 	and a, $3f ; sound length
 	or d
-	ld [$ff11], a
+	ld [rNR11], a
 	ld a, [$c294]
-	ld [$ff13], a
+	ld [rNR13], a
 	ret
 .ch1rest
-	ld a, [$ff26]
+	ld a, [rNR52]
 	and a, %10001110 ; ch1 off
-	ld [$ff26], a
+	ld [rNR52], a
-	ld hl, $ff10
+	ld hl, rNR10
 	call ClearChannel
 	ret
 .asm_e81a2
 	ld hl, $c292
 	ld a, $3f ; sound length
 	or [hl]
-	ld [$ff11], a
+	ld [rNR11], a
 	ld a, [$c293]
-	ld [$ff12], a
+	ld [rNR12], a
 	ld a, [$c294]
-	ld [$ff13], a
+	ld [rNR13], a
 	ld a, [$c295]
 	or a, $80
-	ld [$ff14], a
+	ld [rNR14], a
 	ret
 
 .Channel2
@@ -322,31 +322,31 @@ UpdateChannels: ; e8125
 	ret z
 	ld a, [$c292]
 	ld d, a
-	ld a, [$ff16]
+	ld a, [rNR21]
 	and a, $3f ; sound length
 	or d
-	ld [$ff16], a
+	ld [rNR21], a
 	ret
 .asm_e81db ; unused
 	ld a, [$c294]
-	ld [$ff18], a
+	ld [rNR23], a
 	ld a, [$c295]
-	ld [$ff19], a
+	ld [rNR24], a
 	ret
 .asm_e81e6
 	ld a, [$c292]
 	ld d, a
-	ld a, [$ff16]
+	ld a, [rNR21]
 	and a, $3f ; sound length
 	or d
-	ld [$ff16], a
+	ld [rNR21], a
 	ld a, [$c294]
-	ld [$ff18], a
+	ld [rNR23], a
 	ret
 .ch2rest
-	ld a, [$ff26]
+	ld a, [rNR52]
 	and a, %10001101 ; ch2 off
-	ld [$ff26], a
+	ld [rNR52], a
 	ld hl, $ff15
 	call ClearChannel
 	ret
@@ -354,14 +354,14 @@ UpdateChannels: ; e8125
 	ld hl, $c292
 	ld a, $3f ; sound length
 	or [hl]
-	ld [$ff16], a
+	ld [rNR21], a
 	ld a, [$c293]
-	ld [$ff17], a
+	ld [rNR22], a
 	ld a, [$c294]
-	ld [$ff18], a
+	ld [rNR23], a
 	ld a, [$c295]
 	or a, $80 ; initial (restart)
-	ld [$ff19], a
+	ld [rNR24], a
 	ret
 
 .Channel3
@@ -377,34 +377,34 @@ UpdateChannels: ; e8125
 	ret
 .asm_e822f ; unused
 	ld a, [$c294]
-	ld [$ff1d], a
+	ld [rNR33], a
 	ld a, [$c295]
-	ld [$ff1e], a
+	ld [rNR34], a
 	ret
 .asm_e823a
 	ld a, [$c294]
-	ld [$ff1d], a
+	ld [rNR33], a
 	ret
 .ch3rest
-	ld a, [$ff26]
+	ld a, [rNR52]
 	and a, %10001011 ; ch3 off
-	ld [$ff26], a
+	ld [rNR52], a
-	ld hl, $ff1a
+	ld hl, rNR30
 	call ClearChannel
 	ret
 .asm_e824d
 	ld a, $3f
-	ld [$ff1b], a
+	ld [rNR31], a
 	xor a
-	ld [$ff1a], a
+	ld [rNR30], a
 	call .asm_e8268
 	ld a, $80
-	ld [$ff1a], a
+	ld [rNR30], a
 	ld a, [$c294]
-	ld [$ff1d], a
+	ld [rNR33], a
 	ld a, [$c295]
 	or a, $80
-	ld [$ff1e], a
+	ld [rNR34], a
 	ret
 .asm_e8268
 	push hl
@@ -458,7 +458,7 @@ UpdateChannels: ; e8125
 	ld a, [$c293]
 	and a, $f0
 	sla a
-	ld [$ff1c], a
+	ld [rNR32], a
 	ret
 
 .Channel4
@@ -472,24 +472,24 @@ UpdateChannels: ; e8125
 	ret
 .asm_e82c1 ; unused
 	ld a, [$c294]
-	ld [$ff22], a
+	ld [rNR43], a
 	ret
 .ch4rest
-	ld a, [$ff26]
+	ld a, [rNR52]
 	and a, %10000111 ; ch4 off
-	ld [$ff26], a
+	ld [rNR52], a
 	ld hl, $ff1f
 	call ClearChannel
 	ret
 .asm_e82d4
 	ld a, $3f ; sound length
-	ld [$ff20], a
+	ld [rNR41], a
 	ld a, [$c293]
-	ld [$ff21], a
+	ld [rNR42], a
 	ld a, [$c294]
-	ld [$ff22], a
+	ld [rNR43], a
 	ld a, $80
-	ld [$ff23], a
+	ld [rNR44], a
 	ret
 ; e82e7
 
@@ -535,15 +535,15 @@ Functione8307: ; e8307
 	ld hl, Tablee8350
 .updatehw
 	xor a
-	ld [$ff10], a ; sweep off
+	ld [rNR10], a ; sweep off
 	ld a, [hli]
-	ld [$ff11], a ; sound length / duty cycle
+	ld [rNR11], a ; sound length / duty cycle
 	ld a, [hli]
-	ld [$ff12], a ; ch1 volume envelope
+	ld [rNR12], a ; ch1 volume envelope
 	ld a, [hli]
-	ld [$ff13], a ; ch1 frequency lo
+	ld [rNR13], a ; ch1 frequency lo
 	ld a, [hli]
-	ld [$ff14], a ; ch1 frequency hi
+	ld [rNR14], a ; ch1 frequency hi
 .asm_e8335
 	ld a, d
 	inc a
@@ -1192,7 +1192,7 @@ ParseMusic: ; e85e1
 	jr nz, .ok
 	; ????
 	xor a
-	ld [$ff10], a ; sweep = 0
+	ld [rNR10], a ; sweep = 0
 .ok
 ; stop playing
 	; turn channel off
@@ -2454,56 +2454,56 @@ LoadSFX: ; e8c04
 	jr z, .ch6
 	res 0, [hl] ; turn it off
 	xor a
-	ld [$ff11], a ; length/wavepattern = 0
+	ld [rNR11], a ; length/wavepattern = 0
 	ld a, $08
-	ld [$ff12], a ; envelope = 0
+	ld [rNR12], a ; envelope = 0
 	xor a
-	ld [$ff13], a ; frequency lo = 0
+	ld [rNR13], a ; frequency lo = 0
 	ld a, $80
-	ld [$ff14], a ; restart sound (freq hi = 0)
+	ld [rNR14], a ; restart sound (freq hi = 0)
 	xor a
 	ld [SoundInput], a ; global sound off
-	ld [$ff10], a ; sweep = 0
+	ld [rNR10], a ; sweep = 0
 .ch6
 	ld hl, $c1fe ; ch6 on?
 	bit 0, [hl]
 	jr z, .ch7
 	res 0, [hl] ; turn it off
 	xor a
-	ld [$ff16], a ; length/wavepattern = 0
+	ld [rNR21], a ; length/wavepattern = 0
 	ld a, $08
-	ld [$ff17], a ; envelope = 0
+	ld [rNR22], a ; envelope = 0
 	xor a
-	ld [$ff18], a ; frequency lo = 0
+	ld [rNR23], a ; frequency lo = 0
 	ld a, $80
-	ld [$ff19], a ; restart sound (freq hi = 0)
+	ld [rNR24], a ; restart sound (freq hi = 0)
 .ch7
 	ld hl, $c230 ; ch7 on?
 	bit 0, [hl]
 	jr z, .ch8
 	res 0, [hl] ; turn it off
 	xor a
-	ld [$ff1a], a ; sound mode #3 off
+	ld [rNR30], a ; sound mode #3 off
-	ld [$ff1b], a ; length/wavepattern = 0
+	ld [rNR31], a ; length/wavepattern = 0
 	ld a, $08
-	ld [$ff1c], a ; envelope = 0
+	ld [rNR32], a ; envelope = 0
 	xor a
-	ld [$ff1d], a ; frequency lo = 0
+	ld [rNR33], a ; frequency lo = 0
 	ld a, $80
-	ld [$ff1e], a ; restart sound (freq hi = 0)
+	ld [rNR34], a ; restart sound (freq hi = 0)
 .ch8
 	ld hl, $c262 ; ch8 on?
 	bit 0, [hl]
 	jr z, .chscleared
 	res 0, [hl] ; turn it off
 	xor a
-	ld [$ff20], a ; length/wavepattern = 0
+	ld [rNR41], a ; length/wavepattern = 0
 	ld a, $08
-	ld [$ff21], a ; envelope = 0
+	ld [rNR42], a ; envelope = 0
 	xor a
-	ld [$ff22], a ; frequency lo = 0
+	ld [rNR43], a ; frequency lo = 0
 	ld a, $80
-	ld [$ff23], a ; restart sound (freq hi = 0)
+	ld [rNR44], a ; restart sound (freq hi = 0)
 	xor a
 	ld [NoiseSampleAddressLo], a
 	ld [NoiseSampleAddressHi], a
@@ -3126,13 +3126,13 @@ ChannelPointers: ; e8fd9
 ClearChannels: ; e8fe9
 ; runs ClearChannel for all 4 channels
 ; doesn't seem to be used, but functionally identical to SoundRestart
-	ld hl, $ff24
+	ld hl, rNR50
 	xor a
 	ld [hli], a
 	ld [hli], a
 	ld a, $80
 	ld [hli], a
-	ld hl, $ff10
+	ld hl, rNR10
 	ld e, $04
 .loop
 	call ClearChannel
@@ -3142,19 +3142,19 @@ ClearChannels: ; e8fe9
 ; e8ffe
 
 ClearChannel: ; e8ffe
-; input: hl = beginning hw sound register ($ff10, $ff15, $ff1a, $ff1f)
+; input: hl = beginning hw sound register (rNR10, $ff15, rNR30, $ff1f)
 ; output: 00 00 80 00 80
 
 ;   sound channel   1      2      3      4
 	xor a
-	ld [hli], a ; $ff10, $ff15, $ff1a, $ff1f ; sweep = 0
+	ld [hli], a ; rNR10, $ff15, rNR30, $ff1f ; sweep = 0
 
-	ld [hli], a ; $ff11, $ff16, $ff1b, $ff20 ; length/wavepattern = 0
+	ld [hli], a ; rNR11, rNR21, rNR31, rNR41 ; length/wavepattern = 0
 	ld a, $08
-	ld [hli], a ; $ff12, $ff17, $ff1c, $ff21 ; envelope = 0
+	ld [hli], a ; rNR12, rNR22, rNR32, rNR42 ; envelope = 0
 	xor a
-	ld [hli], a ; $ff13, $ff18, $ff1d, $ff22 ; frequency lo = 0
+	ld [hli], a ; rNR13, rNR23, rNR33, rNR43 ; frequency lo = 0
 	ld a, $80
-	ld [hli], a ; $ff14, $ff19, $ff1e, $ff23 ; restart sound (freq hi = 0)
+	ld [hli], a ; rNR14, rNR24, rNR34, rNR44 ; restart sound (freq hi = 0)
 	ret
 ; e900a

battle/magikarp_length.asm

@@ -0,0 +1,220 @@
+CalcMagikarpLength: ; fbbfc
+; Return Magikarp's length (in mm) in MagikarpLength (big endian)
+;
+; input:
+;   de: EnemyMonDVs
+;   bc: PlayerID
+
+; This function is needlessly convoluted, and poorly commented.
+; Reading is discouraged.
+
+; In short, it generates a value between 190 and 1786 using
+; a Magikarp's DVs and its trainer ID. This value is further
+; scrutinized in GetEnemyMon to make longer Magikarp even rarer.
+
+; This is done by calculating the value using operands from
+; a conversion lookup table.
+
+; Our index is calculated by xoring DVs with the trainer ID:
+
+; bc = rrc(rrc(dvs)) xor rrc(id)
+
+; if bc < $a:     MagikarpLength = c + 190
+; if bc >= $ff00: MagikarpLength = c + 1370
+; else:           MagikarpLength = z*100 + (bc-x)/y
+
+; X, Y, and Z depend on the value of b as follows:
+
+; if b = 0:        x =   310,  y =   2,  z =  3
+; if b = 1:        x =   710,  y =   4,  z =  4
+; if b = 2-9:      x =  2710,  y =  20,  z =  5
+; if b = 10-29:    x =  7710,  y =  50,  z =  6
+; if b = 30-68:    x = 17710,  y = 100,  z =  7
+; if b = 69-126:   x = 32710,  y = 150,  z =  8
+; if b = 127-185:  x = 47710,  y = 150,  z =  9
+; if b = 186-224:  x = 57710,  y = 100,  z = 10
+; if b = 225-243:  x = 62710,  y =  50,  z = 11
+; if b = 244-251:  x = 64710,  y =  20,  z = 12
+; if b = 252-253:  x = 65210,  y =   5,  z = 13
+; if b = 254:      x = 65410,  y =   2,  z = 14
+
+; These values represent arbitrary conversion points.
+
+
+; b = rrcrrc(atkdefdv) xor rrc(id[0])
+	
+; id
+	ld h, b
+	ld l, c
+	ld a, [hli]
+	ld b, a
+	ld c, [hl]
+	rrc b
+	rrc c
+	
+; dvs
+	ld a, [de]
+	inc de
+	rrca
+	rrca
+	xor b
+	ld b, a
+	
+; c = rrcrrc(spdspcdv) xor rrc(id[1])
+	
+	ld a, [de]
+	rrca
+	rrca
+	xor c
+	ld c, a
+	
+; if bc < $000a:
+	ld a, b
+	and a
+	jr nz, .loadtable
+	ld a, c
+	cp a, $a
+	jr nc, .loadtable
+	
+; de = hl = bc + $be
+	ld hl, $be
+	add hl, bc
+	ld d, h
+	ld e, l
+	jr .endtable
+	
+.loadtable
+	ld hl, .MagikarpLengthTable
+	ld a, $02
+	ld [$d265], a
+	
+.readtable
+	ld a, [hli]
+	ld e, a
+	ld a, [hli]
+	ld d, a
+	call .BLessThanD
+	jr nc, .advancetable
+	
+; c = bc / [hl]
+	call .BCMinusDE
+	ld a, b
+	ld [$ffb3], a
+	ld a, c
+	ld [$ffb4], a
+	ld a, [hl]
+	ld [$ffb7], a
+	ld b, $02
+	call Divide
+	ld a, [$ffb6]
+	ld c, a
+	
+; de = c + 100 * (2 + number of rows down the table)
+	xor a
+	ld [$ffb4], a
+	ld [$ffb5], a
+	ld a, $64
+	ld [$ffb6], a
+	ld a, [$d265]
+	ld [$ffb7], a
+	call Multiply
+	ld b, $00
+	ld a, [$ffb6]
+	add c
+	ld e, a
+	ld a, [$ffb5]
+	adc b
+	ld d, a
+	jr .endtable
+	
+.advancetable
+	inc hl ; align to next triplet
+	ld a, [$d265]
+	inc a
+	ld [$d265], a
+	cp a, $10
+	jr c, .readtable
+	
+	call .BCMinusDE
+	ld hl, $0640
+	add hl, bc
+	ld d, h
+	ld e, l
+	
+.endtable
+	ld h, d
+	ld l, e
+	add hl, hl
+	add hl, hl
+	add hl, de
+	add hl, hl ; hl = de * 10
+	
+	ld de, $ff02
+	ld a, $ff
+.loop
+	inc a
+	add hl, de ; - 254
+	jr c, .loop
+	
+	ld d, $00
+	
+; mod $0c
+.modloop
+	cp a, $0c
+	jr c, .done
+	sub a, $0c
+	inc d
+	jr .modloop
+	
+.done
+	ld e, a
+	ld hl, MagikarpLength
+	ld [hl], d
+	inc hl
+	ld [hl], e
+	ret
+; fbc9a
+
+.BLessThanD ; fbc9a
+; return carry if b < d
+	ld a, b
+	cp d
+	ret c
+	ret nc
+; fbc9e
+
+.CLessThanE ; fbc9e
+; unused
+	ld a, c
+	cp e
+	ret
+; fbca1
+
+.BCMinusDE ; fbca1
+; bc -= de
+	ld a, c
+	sub e
+	ld c, a
+	ld a, b
+	sbc d
+	ld b, a
+	ret
+; fbca8
+
+.MagikarpLengthTable ; fbca8
+;	     ????, divisor
+	dwb $006e, $01
+	dwb $0136, $02
+	dwb $02c6, $04
+	dwb $0a96, $14
+	dwb $1e1e, $32
+	dwb $452e, $64
+	dwb $7fc6, $96
+	dwb $ba5e, $96
+	dwb $e16e, $64
+	dwb $f4f6, $32
+	dwb $fcc6, $14
+	dwb $feba, $05
+	dwb $ff82, $02
+; fbccf
+

constants.asm

@@ -3417,6 +3417,11 @@ BATTLETYPE_SUICUNE EQU $0c
 
 
 ; joypad
+BUTTONS    EQU %00010000
+D_PAD      EQU %00100000
+
+AUTO_INPUT EQU $ff
+
 NO_INPUT   EQU %00000000
 BUTTON_A   EQU %00000001
 BUTTON_B   EQU %00000010

gbhw.asm

@@ -0,0 +1,65 @@
+; Graciously aped from http://nocash.emubase.de/pandocs.htm .
+
+rJOYP       EQU $ff00 ; Joypad (R/W)
+rSB         EQU $ff01 ; Serial transfer data (R/W)
+rSC         EQU $ff02 ; Serial Transfer Control (R/W)
+rDIV        EQU $ff04 ; Divider Register (R/W)
+rTIMA       EQU $ff05 ; Timer counter (R/W)
+rTMA        EQU $ff06 ; Timer Modulo (R/W)
+rTAC        EQU $ff07 ; Timer Control (R/W)
+rIF         EQU $ff0f ; Interrupt Flag (R/W)
+rNR10       EQU $ff10 ; Channel 1 Sweep register (R/W)
+rNR11       EQU $ff11 ; Channel 1 Sound length/Wave pattern duty (R/W)
+rNR12       EQU $ff12 ; Channel 1 Volume Envelope (R/W)
+rNR13       EQU $ff13 ; Channel 1 Frequency lo (Write Only)
+rNR14       EQU $ff14 ; Channel 1 Frequency hi (R/W)
+rNR21       EQU $ff16 ; Channel 2 Sound Length/Wave Pattern Duty (R/W)
+rNR22       EQU $ff17 ; Channel 2 Volume Envelope (R/W)
+rNR23       EQU $ff18 ; Channel 2 Frequency lo data (W)
+rNR24       EQU $ff19 ; Channel 2 Frequency hi data (R/W)
+rNR30       EQU $ff1a ; Channel 3 Sound on/off (R/W)
+rNR31       EQU $ff1b ; Channel 3 Sound Length
+rNR32       EQU $ff1c ; Channel 3 Select output level (R/W)
+rNR33       EQU $ff1d ; Channel 3 Frequency's lower data (W)
+rNR34       EQU $ff1e ; Channel 3 Frequency's higher data (R/W)
+rNR41       EQU $ff20 ; Channel 4 Sound Length (R/W)
+rNR42       EQU $ff21 ; Channel 4 Volume Envelope (R/W)
+rNR43       EQU $ff22 ; Channel 4 Polynomial Counter (R/W)
+rNR44       EQU $ff23 ; Channel 4 Counter/consecutive; Inital (R/W)
+rNR50       EQU $ff24 ; Channel control / ON-OFF / Volume (R/W)
+rNR51       EQU $ff25 ; Selection of Sound output terminal (R/W)
+rNR52       EQU $ff26 ; Sound on/off
+rLCDC       EQU $ff40 ; LCD Control (R/W)
+rSTAT       EQU $ff41 ; LCDC Status (R/W)
+rSCY        EQU $ff42 ; Scroll Y (R/W)
+rSCX        EQU $ff43 ; Scroll X (R/W)
+rLY         EQU $ff44 ; LCDC Y-Coordinate (R)
+rLYC        EQU $ff45 ; LY Compare (R/W)
+rDMA        EQU $ff46 ; DMA Transfer and Start Address (W)
+rBGP        EQU $ff47 ; BG Palette Data (R/W) - Non CGB Mode Only
+rOBP0       EQU $ff48 ; Object Palette 0 Data (R/W) - Non CGB Mode Only
+rOBP1       EQU $ff49 ; Object Palette 1 Data (R/W) - Non CGB Mode Only
+rWY         EQU $ff4a ; Window Y Position (R/W)
+rWX         EQU $ff4b ; Window X Position minus 7 (R/W)
+rKEY1       EQU $ff4d ; CGB Mode Only - Prepare Speed Switch
+rVBK        EQU $ff4f ; CGB Mode Only - VRAM Bank
+rHDMA1      EQU $ff51 ; CGB Mode Only - New DMA Source, High
+rHDMA2      EQU $ff52 ; CGB Mode Only - New DMA Source, Low
+rHDMA3      EQU $ff53 ; CGB Mode Only - New DMA Destination, High
+rHDMA4      EQU $ff54 ; CGB Mode Only - New DMA Destination, Low
+rHDMA5      EQU $ff55 ; CGB Mode Only - New DMA Length/Mode/Start
+rRP         EQU $ff56 ; CGB Mode Only - Infrared Communications Port
+rBGPI       EQU $ff68 ; CGB Mode Only - Background Palette Index
+rBGPD       EQU $ff69 ; CGB Mode Only - Background Palette Data
+rOBPI       EQU $ff6a ; CGB Mode Only - Sprite Palette Index
+rOBPD       EQU $ff6b ; CGB Mode Only - Sprite Palette Data
+rUNKNOWN1   EQU $ff6c ; (FEh) Bit 0 (Read/Write) - CGB Mode Only
+rSVBK       EQU $ff70 ; CGB Mode Only - WRAM Bank
+rUNKNOWN2   EQU $ff72 ; (00h) - Bit 0-7 (Read/Write)
+rUNKNOWN3   EQU $ff73 ; (00h) - Bit 0-7 (Read/Write)
+rUNKNOWN4   EQU $ff74 ; (00h) - Bit 0-7 (Read/Write) - CGB Mode Only
+rUNKNOWN5   EQU $ff75 ; (8Fh) - Bit 4-6 (Read/Write)
+rUNKNOWN6   EQU $ff76 ; (00h) - Always 00h (Read Only)
+rUNKNOWN7   EQU $ff77 ; (00h) - Always 00h (Read Only)
+rIE         EQU $ffff ; Interrupt Enable (R/W)
+

joypad.asm

@@ -0,0 +1,275 @@
+JoypadInt: ; 92e
+; Replaced by Joypad, called from VBlank instead of the useless
+; joypad interrupt.
+
+; This is a placeholder in case the interrupt is somehow enabled.
+	reti
+; 92f
+
+ClearJoypadPublic: ; 92f
+	xor a
+; Pressed this frame (delta)
+	ld [$ffa7], a
+; Currently pressed
+	ld [$ffa8], a
+	ret
+; 935
+
+Joypad: ; 935
+; Read the joypad register and translate it to something more
+; workable for use in-game. There are 8 buttons, so we can use
+; one byte to contain all player input.
+
+; Updates:
+
+; $ffa2: released this frame (delta)
+; $ffa3: pressed this frame (delta)
+; $ffa4: currently pressed
+; $ffa5: pressed so far
+
+; Any of these three bits can be used to disable input.
+	ld a, [$cfbe]
+	and %11010000
+	ret nz
+	
+; If we're saving, input is disabled.
+	ld a, [$c2cd]
+	and a
+	ret nz
+	
+; We can only get four inputs at a time.
+; We take d-pad first for no particular reason.
+	ld a, D_PAD
+	ld [rJOYP], a
+; Read twice to give the request time to take.
+	ld a, [rJOYP]
+	ld a, [rJOYP]
+	
+; The Joypad register output is in the lo nybble (inversed).
+; We make the hi nybble of our new container d-pad input.
+	cpl
+	and $f
+	swap a
+	
+; We'll keep this in b for now.
+	ld b, a
+	
+; Buttons make 8 total inputs (A, B, Select, Start).
+; We can fit this into one byte.
+	ld a, BUTTONS
+	ld [rJOYP], a
+; Wait for input to stabilize.
+	ld a, [rJOYP]
+	ld a, [rJOYP]
+	ld a, [rJOYP]
+	ld a, [rJOYP]
+	ld a, [rJOYP]
+	ld a, [rJOYP]
+; Buttons take the lo nybble.
+	cpl
+	and $f
+	or b
+	ld b, a
+	
+; Reset the joypad register since we're done with it.
+	ld a, $30
+	ld [rJOYP], a
+	
+; To get the delta we xor the last frame's input with the new one.
+	ld a, [$ffa4] ; last frame
+	ld e, a
+	xor b
+	ld d, a
+; Released this frame:
+	and e
+	ld [$ffa2], a
+; Pressed this frame:
+	ld a, d
+	and b
+	ld [$ffa3], a
+	
+; Add any new presses to the list of collective presses:
+	ld c, a
+	ld a, [$ffa5]
+	or c
+	ld [$ffa5], a
+	
+; Currently pressed:
+	ld a, b
+	ld [$ffa4], a
+	
+; Now that we have the input, we can do stuff with it.
+
+; For example, soft reset:
+	and BUTTON_A | BUTTON_B | SELECT | START
+	cp  BUTTON_A | BUTTON_B | SELECT | START
+	jp z, $0150 ; reset
+	
+	ret
+; 984
+
+
+GetJoypadPublic: ; 984
+; Update mirror joypad input from $ffa4 (real input)
+
+; $ffa6: released this frame (delta)
+; $ffa7: pressed this frame (delta)
+; $ffa8: currently pressed
+
+; bit 0 A
+;     1 B
+;     2 SELECT
+;     3 START
+;     4 RIGHT
+;     5 LEFT
+;     6 UP
+;     7 DOWN
+
+	push af
+	push hl
+	push de
+	push bc
+	
+; The player input can be automated using an input stream.
+; See more below.
+	ld a, [InputType]
+	cp a, AUTO_INPUT
+	jr z, .auto
+
+; To get deltas, take this and last frame's input.
+	ld a, [$ffa4] ; real input
+	ld b, a
+	ld a, [$ffa8] ; last frame mirror
+	ld e, a
+	
+; Released this frame:
+	xor b
+	ld d, a
+	and e
+	ld [$ffa6], a
+	
+; Pressed this frame:
+	ld a, d
+	and b
+	ld [$ffa7], a
+	
+; It looks like the collective presses got commented out here.
+	ld c, a
+	
+; Currently pressed:
+	ld a, b
+	ld [$ffa8], a ; frame input
+	
+.quit
+	pop bc
+	pop de
+	pop hl
+	pop af
+	ret	
+
+.auto
+; Use a predetermined input stream (used in the catching tutorial).
+
+; Stream format: [input][duration]
+; A value of $ff will immediately end the stream.
+
+; Read from the input stream.
+	ld a, [$ff9d]
+	push af
+	ld a, [AutoInputBank]
+	rst Bankswitch
+	
+	ld hl, AutoInputAddress
+	ld a, [hli]
+	ld h, [hl]
+	ld l, a
+	
+; We only update when the input duration has expired.
+	ld a, [AutoInputLength]
+	and a
+	jr z, .updateauto
+	
+; Until then, don't change anything.
+	dec a
+	ld [AutoInputLength], a
+	pop af
+	rst Bankswitch
+	jr .quit
+	
+	
+.updateauto
+; An input of $ff will end the stream.
+	ld a, [hli]
+	cp a, $ff
+	jr z, .stopauto
+	ld b, a
+	
+; A duration of $ff will end the stream indefinitely.
+	ld a, [hli]
+	ld [AutoInputLength], a
+	cp a, $ff
+	jr nz, .next
+	
+; The current input is overwritten.
+	dec hl
+	dec hl
+	ld b, NO_INPUT
+	jr .finishauto
+	
+.next
+; On to the next input...
+	ld a, l
+	ld [AutoInputAddress], a
+	ld a, h
+	ld [AutoInputAddress+1], a
+	jr .finishauto
+	
+.stopauto
+	call StopAutoInput
+	ld b, NO_INPUT
+	
+.finishauto
+	pop af
+	rst Bankswitch
+	ld a, b
+	ld [$ffa7], a ; pressed
+	ld [$ffa8], a ; input
+	jr .quit
+; 9ee
+
+
+StartAutoInput: ; 9ee
+; Start reading automated input stream at a:hl.
+	
+	ld [AutoInputBank], a
+	ld a, l
+	ld [AutoInputAddress], a
+	ld a, h
+	ld [AutoInputAddress+1], a
+; Start reading the stream immediately.
+	xor a
+	ld [AutoInputLength], a
+; Reset input mirrors.
+	xor a
+	ld [$ffa7], a ; pressed this frame
+	ld [$ffa6], a ; released this frame
+	ld [$ffa8], a ; currently pressed
+	
+	ld a, AUTO_INPUT
+	ld [InputType], a
+	ret
+; a0a
+
+
+StopAutoInput: ; a0a
+; Clear variables related to automated input.
+	xor a
+	ld [AutoInputBank], a
+	ld [AutoInputAddress], a
+	ld [AutoInputAddress+1], a
+	ld [AutoInputLength], a
+; Back to normal input.
+	ld [InputType], a
+	ret
+; a1b
+

pokecrystal.asm

@@ -1,3 +1,4 @@
 INCLUDE "wram.asm"
 INCLUDE "constants.asm"
+INCLUDE "gbhw.asm"
 INCLUDE "main.tx"

vblank.asm

@@ -69,13 +69,13 @@ VBlank0: ; 2b1
 	inc [hl]
 	
 ; advance rng
-	ld a, [$ff04] ; divider
+	ld a, [rDIV]
 	ld b, a
 	ld a, [$ffe1]
 	adc b
 	ld [$ffe1], a
 	
-	ld a, [$ff04] ; divider
+	ld a, [rDIV]
 	ld b, a
 	ld a, [$ffe2]
 	sbc b
@@ -87,16 +87,16 @@ VBlank0: ; 2b1
 	
 ; scroll x
 	ld a, [$ffcf]
-	ld [$ff43], a ; scx
+	ld [rSCX], a
 ; scroll y
 	ld a, [$ffd0]
-	ld [$ff42], a ; scy
+	ld [rSCY], a
 ; window y
 	ld a, [$ffd2]
-	ld [$ff4a], a ; wy
+	ld [rWY], a
 ; window x + 7
 	ld a, [$ffd1]
-	ld [$ff4b], a ; wx
+	ld [rWX], a
 	
 ; some time management is in order
 ; only have time for one of these during vblank
@@ -131,7 +131,7 @@ VBlank0: ; 2b1
 	call $ff80
 ;	403f:
 ;		ld a, $c4
-;		ld [$ff46], a ; oam dma
+;		ld [rDMA], a
 ;		ld a, $28
 ;	.loop
 ;		dec a
@@ -216,11 +216,11 @@ VBlank1: ; 337
 	
 ; scroll x
 	ld a, [$ffcf]
-	ld [$ff43], a ; scx
+	ld [rSCX], a
 	
 ; scroll y
 	ld a, [$ffd0]
-	ld [$ff42], a ; scy
+	ld [rSCY], a
 	
 ; time-sensitive fns
 	call UpdatePals
@@ -233,7 +233,7 @@ VBlank1: ; 337
 	call $ff80
 ;	403f:
 ;		ld a, $c4
-;		ld [$ff46], a ; oam dma
+;		ld [rDMA], a
 ;		ld a, $28
 ;	.loop
 ;		dec a
@@ -246,20 +246,20 @@ VBlank1: ; 337
 	ld [VBlankOccurred], a
 	
 ; get requested ints
-	ld a, [$ff0f] ; IF
+	ld a, [rIF]
 	ld b, a
 ; discard requested ints
 	xor a
-	ld [$ff0f], a ; IF
+	ld [rIF], a
 ; enable lcd stat
 	ld a, %10 ; lcd stat
-	ld [$ffff], a ; IE
+	ld [rIE], a
 ; rerequest serial int if applicable (still disabled)
 ; request lcd stat
 	ld a, b
 	and %1000 ; serial
 	or %10 ; lcd stat
-	ld [$ff0f], a ; IF
+	ld [rIF], a
 	
 	ei
 ; update sound
@@ -272,17 +272,17 @@ VBlank1: ; 337
 	di
 	
 ; get requested ints
-	ld a, [$ff0f] ; IF
+	ld a, [rIF]
 	ld b, a
 ; discard requested ints
 	xor a
-	ld [$ff0f], a ; IF
+	ld [rIF], a
 ; enable ints besides joypad
 	ld a, %1111 ; serial timer lcdstat vblank
-	ld [$ffff], a ; IE
+	ld [rIE], a
 ; rerequest ints
 	ld a, b
-	ld [$ff0f], a ; IF
+	ld [rIF], a
 	ret
 ; 37f
 
@@ -297,13 +297,13 @@ UpdatePals: ; 37f
 	
 ; update gb pals
 	ld a, [$cfc7]
-	ld [$ff47], a ; BGP
+	ld [rBGP], a
 	
 	ld a, [$cfc8]
-	ld [$ff48], a ; OBP0
+	ld [rOBP0], a
 	
 	ld a, [$cfc9]
-	ld [$ff49], a ; 0BP1
+	ld [rOBP1], a
 	
 	and a
 	ret
@@ -324,10 +324,10 @@ VBlank3: ; 396
 	
 ; scroll x
 	ld a, [$ffcf]
-	ld [$ff43], a ; scx
+	ld [rSCX], a
 ; scroll y
 	ld a, [$ffd0]
-	ld [$ff42], a ; scy
+	ld [rSCY], a
 	
 ; any pals to update?
 	ld a, [$ffe5]
@@ -342,7 +342,7 @@ VBlank3: ; 396
 	call $ff80
 ;	403f:
 ;		ld a, $c4 ; Sprites / $100
-;		ld [$ff46], a ; oam dma
+;		ld [rDMA], a
 ;		ld a, $28
 ;	.loop
 ;		dec a
@@ -355,15 +355,15 @@ VBlank3: ; 396
 	ld [VBlankOccurred], a
 	
 ; save int flag
-	ld a, [$ff0f] ; IF
+	ld a, [rIF]
 	push af
 ; reset ints
 	xor a
-	ld [$ff0f], a ; IF
+	ld [rIF], a
 ; force lcdstat int during sound update
 	ld a, %10 ; lcd stat
-	ld [$ffff], a ; IE
+	ld [rIE], a
-	ld [$ff0f], a ; IF
+	ld [rIF], a
 	
 	ei
 ; update sound
@@ -376,7 +376,7 @@ VBlank3: ; 396
 	di
 	
 ; request lcdstat
-	ld a, [$ff0f] ; IF
+	ld a, [rIF]
 	ld b, a
 ; and any other ints
 	pop af
@@ -384,13 +384,13 @@ VBlank3: ; 396
 	ld b, a
 ; reset ints
 	xor a
-	ld [$ff0f], a ; IF
+	ld [rIF], a
 ; enable ints besides joypad
 	ld a, %1111 ; serial timer lcdstat vblank
-	ld [$ffff], a ; IE
+	ld [rIE], a
 ; request ints
 	ld a, b
-	ld [$ff0f], a ; IF
+	ld [rIF], a
 	ret
 ; 3df
 
@@ -414,7 +414,7 @@ VBlank4: ; 3df
 	call $ff80
 ;	403f:
 ;		ld a, $c4
-;		ld [$ff46], a ; oam dma
+;		ld [rDMA], a
 ;		ld a, $28
 ;	.loop
 ;		dec a
@@ -456,7 +456,7 @@ VBlank5: ; 400
 	
 ; scroll x
 	ld a, [$ffcf]
-	ld [$ff43], a ; scx
+	ld [rSCX], a
 	
 ; if we can update pals, skip this part
 	call UpdatePalsIfCGB
@@ -475,12 +475,12 @@ VBlank5: ; 400
 	
 ; discard requested ints
 	xor a
-	ld [$ff0f], a ; IF
+	ld [rIF], a
 ; enable lcd stat
 	ld a, %10 ; lcd stat
-	ld [$ffff], a ; IE
+	ld [rIE], a
 ; request lcd stat
-	ld [$ff0f], a ; IF
+	ld [rIF], a
 	
 	ei
 ; update sound
@@ -494,10 +494,10 @@ VBlank5: ; 400
 	
 ; discard requested ints
 	xor a
-	ld [$ff0f], a ; IF
+	ld [rIF], a
 ; enable ints besides joypad
 	ld a, %1111 ; serial timer lcdstat vblank
-	ld [$ffff], a ; IE
+	ld [rIE], a
 	ret
 ; 436
 

wram.asm

@@ -837,11 +837,9 @@ TileSetPalettes: ; d1e6
 	ds 2
 
 Buffer1:
-MagikarpLength:
+MagikarpLength: ; d1ea
-MagikarpLengthHi: ; d1ea
 	ds 1
-Buffer2:
+Buffer2: ; d1eb
-MagikarpLengthLo: ; d1eb
 	ds 1
 
 SECTION "prng2",BSS[$d1fa]