add a file "how to burn firmware"

en/get-started/how_to_burn_firmware_en.md

@@ -4,6 +4,51 @@ This article will guide you how to burn a right firmware to your board.
 
 ### For MacOS
 
-
+***(Coming soon...)***
 
 ### For Windows
+
+#### 1. Download M5Burner
+
+For downloading M5Burner, visit the [offical website](http://www.m5stack.com) please.
+
+![image](../../_static/getting_started_pics/download_M5Burner.png)
+
+#### 2. Burn the firmware
+
+Unpack the M5Burner tool which you donwloaded for official website just now in any folder, then execute the executable file `M5Burner.exe`.
+
+![image](../../_static/getting_started_pics/burn_firmware_01.png)
+
+
+**Then choice the `serial port` which is connected with your board and the `Baud` which is 921600 following below steps.**
+
+![image](../../_static/getting_started_pics/burn_firmware_02.png)
+
+**1. Choice a right firmware**
+
+a. select `M5Flow-vx.x` option, if you want to program with [M5Flow](http://flow.m5stack.com)
+
+b. select `M5Cam-vx.x (/M5Cam-psram)` option, if you own a ESP32CAM (/ M5CAMERA)
+
+**2. Click `Erase`**
+
+![image](../../_static/getting_started_pics/burn_firmware_06.png)
+
+*If M5Burner shows the information `Hard resetting via RTS pin...` below, it means chip has been erased successfully.*
+
+![image](../../_static/getting_started_pics/burn_firmware_04.png)
+
+
+**3. Click `Burn`**
+
+![image](../../_static/getting_started_pics/burn_firmware_03.png)
+
+*If M5Burner shows the information `Leaving... Staying in bootloader.` below, it means chip has been burnt successfully.*
+
+![image](../../_static/getting_started_pics/burn_firmware_05.png)
+
+#### ***Note:***
+***1. If M5Burner means be busy after clicking `Burn`, please wait for a few minutes. It'll be normal after the firmware has been burnt successfully.***
+
+***2. If the burning procedure has been interrupted(like M5Burner has been closed suddenly...), it's better to burn your board again.***

en/get-started/how_to_burn_firmware_en.rst

@@ -0,0 +1,83 @@
+How to Burn Firmware
+====================
+
+This article will guide you how to burn a right firmware to your board.
+
+For MacOS
+~~~~~~~~~
+
+***(Coming soon...)***
+
+For Windows
+~~~~~~~~~~~
+
+1. Download M5Burner
+^^^^^^^^^^^^^^^^^^^^
+
+For downloading M5Burner, visit the `offical
+website <http://www.m5stack.com>`__ please.
+
+.. figure:: ../../_static/getting_started_pics/download_M5Burner.png
+   :alt: image
+
+   image
+2. Burn the firmware
+^^^^^^^^^^^^^^^^^^^^
+
+Unpack the M5Burner tool which you donwloaded for official website just
+now in any folder, then execute the executable file ``M5Burner.exe``.
+
+.. figure:: ../../_static/getting_started_pics/burn_firmware_01.png
+   :alt: image
+
+   image
+**Then choice the ``serial port`` which is connected with your board and
+the ``Baud`` which is 921600 following below steps.**
+
+.. figure:: ../../_static/getting_started_pics/burn_firmware_02.png
+   :alt: image
+
+   image
+**1. Choice a right firmware**
+
+a. select ``M5Flow-vx.x`` option, if you want to program with
+   `M5Flow <http://flow.m5stack.com>`__
+
+b. select ``M5Cam-vx.x (/M5Cam-psram)`` option, if you own a ESP32CAM (/
+   M5CAMERA)
+
+**2. Click ``Erase``**
+
+.. figure:: ../../_static/getting_started_pics/burn_firmware_06.png
+   :alt: image
+
+   image
+*If M5Burner shows the information ``Hard resetting via RTS pin...``
+below, it means chip has been erased successfully.*
+
+.. figure:: ../../_static/getting_started_pics/burn_firmware_04.png
+   :alt: image
+
+   image
+**3. Click ``Burn``**
+
+.. figure:: ../../_static/getting_started_pics/burn_firmware_03.png
+   :alt: image
+
+   image
+*If M5Burner shows the information ``Leaving... Staying in bootloader.``
+below, it means chip has been burnt successfully.*
+
+.. figure:: ../../_static/getting_started_pics/burn_firmware_05.png
+   :alt: image
+
+   image
+***Note:***
+^^^^^^^^^^^
+
+***1. If M5Burner means be busy after clicking ``Burn``, please wait for
+a few minutes. It'll be normal after the firmware has been burnt
+successfully.***
+
+***2. If the burning procedure has been interrupted(like M5Burner has
+been closed suddenly...), it's better to burn your board again.***