Merge branch 'master' of github.com:m5stack/m5-docs

docs/en/1515/6060-push.md

@@ -36,7 +36,7 @@ This an application-level module, which implements a motion & robotic control an
       <td>Parameter</td>
    </tr>
    <tr>
-      <td>net weight</td>
+      <td>Net weight</td>
       <td>569g</td>
    </tr>
    <tr>

docs/en/1515/nut.md

@@ -25,7 +25,7 @@
       <td>Parameter</td>
    </tr>
    <tr>
-      <td>net weight</td>
+      <td>Net weight</td>
       <td>7g</td>
    </tr>
    <tr>

docs/en/accessory/485t.md

@@ -25,7 +25,7 @@
       <td>Parameter</td>
    </tr>
    <tr>
-      <td>net weight</td>
+      <td>Net weight</td>
       <td>15g</td>
    </tr>
    <tr>

docs/en/accessory/battery_base.md

@@ -35,7 +35,7 @@ You can wire it with the battery interface on M5camera board. Pay attention to t
       <td>Parameter</td>
    </tr>
    <tr>
-      <td>net weight</td>
+      <td>Net weight</td>
       <td>12g</td>
    </tr>
    <tr>

docs/en/accessory/bus_socket.md

@@ -25,7 +25,7 @@
       <td>Parameter</td>
    </tr>
    <tr>
-      <td>net weight</td>
+      <td>Net weight</td>
       <td>7g</td>
    </tr>
    <tr>

docs/en/accessory/cable/lego_cable.md

@@ -24,7 +24,7 @@
       <td>Parameter</td>
    </tr>
    <tr>
-      <td>net weight</td>
+      <td>Net weight</td>
       <td>3/5/7g</td>
    </tr>
    <tr>

docs/en/accessory/converter/grove2grove.md

@@ -22,7 +22,7 @@
       <td>Parameter</td>
    </tr>
    <tr>
-      <td>net weight</td>
+      <td>Net weight</td>
       <td>6g</td>
    </tr>
    <tr>

docs/en/accessory/converter/grove_t.md

@@ -19,7 +19,7 @@ Notice: **CONNEXT-T** is just a hardware expander, if you are looking for hardwa
       <td>Parameter</td>
    </tr>
    <tr>
-      <td>net weight</td>
+      <td>Net weight</td>
       <td>g</td>
    </tr>
    <tr>

docs/en/accessory/frame.md

@@ -23,7 +23,7 @@
       <td>Parameter</td>
    </tr>
    <tr>
-      <td>net weight</td>
+      <td>Net weight</td>
       <td>20g</td>
    </tr>
    <tr>

docs/en/accessory/glass_panel_repair_kit.md

@@ -30,7 +30,7 @@ As time goes by, the screen surface and buttons of the M5Core may be filled with
       <td>Parameter</td>
    </tr>
    <tr>
-      <td>net weight</td>
+      <td>Net weight</td>
       <td>3g</td>
    </tr>
    <tr>

docs/en/accessory/screw.md

@@ -30,7 +30,7 @@
       <td>Parameter</td>
    </tr>
    <tr>
-      <td>net weight</td>
+      <td>Net weight</td>
       <td>67g</td>
    </tr>
    <tr>

docs/en/accessory/servo_kit.md

@@ -88,7 +88,7 @@
       <td>3cm</td>
    </tr>
    <tr>
-      <td>net weight</td>
+      <td>Net weight</td>
       <td>44g</td>
    </tr>
    <tr>

docs/en/accessory/sg90_servo.md

@@ -26,7 +26,7 @@
       <td>Parameter</td>
    </tr>
    <tr>
-      <td>net weight</td>
+      <td>Net weight</td>
       <td>9g</td>
    </tr>
    <tr>

docs/en/app/ac_socket.md

@@ -56,7 +56,7 @@ Let's break it down a little bit, start with the bottom part.
       <td>Parameter</td>
    </tr>
    <tr>
-      <td>net weight</td>
+      <td>Net weight</td>
       <td>120g</td>
    </tr>
    <tr>

docs/en/app/bala.md

@@ -46,7 +46,7 @@ NOTE: Calibration required for first use！Press and hold the right C key to sta
       <td>Parameter</td>
    </tr>
    <tr>
-      <td>net weight</td>
+      <td>Net weight</td>
       <td>130g</td>
    </tr>
    <tr>

docs/en/app/balac.md

@@ -71,7 +71,7 @@
             <td>16340, 3.7V, 700mAh, Li-ions rechargeable</td>
         </tr>
         <tr>
-            <td>net weight</td>
+            <td>Net weight</td>
             <td>162g</td>
         </tr>
         <tr>