mirror of
https://github.com/m5stack/m5-docs.git
synced 2026-05-20 10:23:01 -07:00
Merge branch 'master' of https://github.com/m5stack/m5-docs
This commit is contained in:
vany5921
@@ -6,7 +6,7 @@
|
||||
|
||||
## Description
|
||||
|
||||
**ATOM SWITCH** is a bi-directional control programable switch for the M5ATOM. It can be connected to bi-directional AC circuits for simultaneous on-off control. The on-board relay can support up to 250V / 10A AC(Instantaneous current 16A). Built in step-down module can provide 5V / 1A DC power supply for ATOM. In order to ensure safe use, its DC circuit has overheating and short circuit protection functions. In order to facilitate the use of users in industrial scenarios, an SP485EE level-conversion IC is built in. There are also a set of RS485 interfaces provided for the user to connect RS485 equipment.RS485 has the ability to supply power to ATOM, the support voltage is 9-24V. In addition, a set of PH2.0 interfaces is also provided for connecting I2C peripheral equipment or general I/O equipment. With the Bluetooth and WiFi functions of M5ATOM, you can easily setup a remote control switch. If you have multiple M5ATOM HUB SWITCH modules, you can set them up in parallel through the RS485 interface.
|
||||
**ATOM SWITCH** is a bi-directional control programable switch for the M5ATOM. It can be connected to bi-directional AC circuits for simultaneous on-off control. The on-board relay can support up to 250V / 10A AC(Instantaneous current 16A). Built in step-down module can provide 5V / 1A DC power supply for ATOM. In order to ensure safe use, its DC circuit has overheating and short circuit protection functions. In order to facilitate the use of users in industrial scenarios, an SP485EE level-conversion IC is built in. There are also a set of RS485 interfaces provided for the user to connect RS485 equipment.RS485 has the ability to supply power to ATOM, the support voltage is 9-24V. In addition, a set of HY2.0 interfaces is also provided for connecting I2C peripheral equipment or general I/O equipment. With the Bluetooth and WiFi functions of M5ATOM, you can easily setup a remote control switch. If you have multiple M5ATOM HUB SWITCH modules, you can set them up in parallel through the RS485 interface.
|
||||
|
||||
## Product Features
|
||||
|
||||
@@ -14,7 +14,7 @@
|
||||
- Built-in AC-DC circuit
|
||||
- 2-way relay
|
||||
- Built-in RS485 level-conversion, supporting Modbus
|
||||
- PH2.0 port extend
|
||||
- HY2.0 port extend
|
||||
- Short circuit protection
|
||||
- Remote control via Bluetooth, WiFi and RS485
|
||||
|
||||
@@ -56,7 +56,7 @@
|
||||
</tr>
|
||||
<tr>
|
||||
<td>Interface</td>
|
||||
<td>1x PH2.0(PORT A)， 1x VH3.96 4P(RS485), 2x VH3.96 3P(Relay), 1x VH3.96 3P(AC/DC IN)</td>
|
||||
<td>1x HY2.0(PORT A)， 1x VH3.96 4P(RS485), 2x VH3.96 3P(Relay), 1x VH3.96 3P(AC/DC IN)</td>
|
||||
</tr>
|
||||
<tr>
|
||||
<td>net weight</td>
|
||||
|
||||
@@ -6,7 +6,7 @@
|
||||
|
||||
## Description
|
||||
|
||||
**Atom Lite**, which has a size of only 24*24mm, is a very compact development board in the M5Stack development kit series. It provides more GPIOs for user customization which is very suitable for embedded smart home devices and in making smart toys. The main control adopts the ESP32-PICO chip which comes integrated with Wi-Fi and Bluetooth technologies and has a 4MB of integrated SPI flash memory. Atom Lite board provides an Infra-Red LED, a RGB LED, buttons, and a PH2.0 interface. In addition, it can connect to external sensors and actuators through 6 GPIOs. The on-board Type-C USB interface enables rapid program upload and execution.
|
||||
**Atom Lite**, which has a size of only 24*24mm, is a very compact development board in the M5Stack development kit series. It provides more GPIOs for user customization which is very suitable for embedded smart home devices and in making smart toys. The main control adopts the ESP32-PICO chip which comes integrated with Wi-Fi and Bluetooth technologies and has a 4MB of integrated SPI flash memory. Atom Lite board provides an Infra-Red LED, a RGB LED, buttons, and a HY2.0 interface. In addition, it can connect to external sensors and actuators through 6 GPIOs. The on-board Type-C USB interface enables rapid program upload and execution.
|
||||
|
||||
## Product Features
|
||||
|
||||
|
||||
@@ -6,7 +6,7 @@
|
||||
|
||||
## Description
|
||||
|
||||
**ATOM Matrix** , which has a size of only 24 * 24mm, is the most compact development board in the M5Stack development kit series. It provides more GPIO pins and is very suitable for handy and miniature embedded device development. The main control adopts the ESP32-PICO-D4 chip, which comes integrated with Wi-Fi and Bluetooth technologies and has 4MB of integrated SPI flash memory. The Atom board provides an Infra-Red LED along with the 5 * 5 RGB LED matrix on the panel, a built-in IMU sensor (MPU6886), and a PH2.0 interface. A general purpose programmable button is provied below the RGB Led matrix to enable users to add input support to their various projects. The on-board USB interface (Type-C) enables rapid program uploading and execution. One M2 screw hole is provided on the back for mounting the board.
|
||||
**ATOM Matrix** , which has a size of only 24 * 24mm, is the most compact development board in the M5Stack development kit series. It provides more GPIO pins and is very suitable for handy and miniature embedded device development. The main control adopts the ESP32-PICO-D4 chip, which comes integrated with Wi-Fi and Bluetooth technologies and has 4MB of integrated SPI flash memory. The Atom board provides an Infra-Red LED along with the 5 * 5 RGB LED matrix on the panel, a built-in IMU sensor (MPU6886), and a HY2.0 interface. A general purpose programmable button is provied below the RGB Led matrix to enable users to add input support to their various projects. The on-board USB interface (Type-C) enables rapid program uploading and execution. One M2 screw hole is provided on the back for mounting the board.
|
||||
|
||||
<mark>NOTE: We have set the brightness of RGB LED limited to 20. Pls DO NOT set it higher to avoid damaging the LED and acrylic screen.</mark>
|
||||
|
||||
|
||||
@@ -6,7 +6,7 @@
|
||||
|
||||
## Description
|
||||
|
||||
**M5StickT**is an exquisite and compact infrared thermal imaging camera. It adopts the latest FLIR Lepton 3.0 long-wave infrared (LWIR) camera core with an effective resolution of 160 * 120 for a clear and stable image. As it is a large area non-contact infrared sensor, it is a good solution for temperature measurement. Its main control chip is Espressif’s ESP32, which has built-in support for Wi-Fi and Bluetooth connections, and computing speeds of up to 240Mhz. This provides a favorable guarantee for image output with a FPS reaching 7 and above. The screen is 1.14 inches and has a resolution of 135 * 240. The device comes with a rich variety of hardware resources: An on-board 6-axis Inertial Measurement Unit, a digital microphone and a power management chip and a built-in 300mAh battery, all embedded into the device. In terms of interactive operation, two programmable buttons and a rotary encoder are provided. In order to facilitate users to connect more peripherals, a 4 Pin PH2.0 interface with I2C support is provided at the bottom. The body is 3D printed from high quality Black Nylon filament. In addition, an M3 screw hole and a 1/4" screw hole are provided underside for easy mounting.
|
||||
**M5StickT**is an exquisite and compact infrared thermal imaging camera. It adopts the latest FLIR Lepton 3.0 long-wave infrared (LWIR) camera core with an effective resolution of 160 * 120 for a clear and stable image. As it is a large area non-contact infrared sensor, it is a good solution for temperature measurement. Its main control chip is Espressif’s ESP32, which has built-in support for Wi-Fi and Bluetooth connections, and computing speeds of up to 240Mhz. This provides a favorable guarantee for image output with a FPS reaching 7 and above. The screen is 1.14 inches and has a resolution of 135 * 240. The device comes with a rich variety of hardware resources: An on-board 6-axis Inertial Measurement Unit, a digital microphone and a power management chip and a built-in 300mAh battery, all embedded into the device. In terms of interactive operation, two programmable buttons and a rotary encoder are provided. In order to facilitate users to connect more peripherals, a 4 Pin HY2.0 interface with I2C support is provided at the bottom. The body is 3D printed from high quality Black Nylon filament. In addition, an M3 screw hole and a 1/4" screw hole are provided underside for easy mounting.
|
||||
|
||||
|
||||
**Power switch operation：**
|
||||
@@ -32,7 +32,7 @@ Press the reset button to power on. The default display screen is RGB display mo
|
||||
- Buttons and dial encoder
|
||||
- IPS LCD(1.14 inch)
|
||||
- built-in Lipo Battery
|
||||
- GROVE/4P PH2.0 Interface
|
||||
- GROVE/4P HY2.0 Interface
|
||||
|
||||
|
||||
## Include
|
||||
@@ -197,11 +197,11 @@ Resolution：135 * 240
|
||||
<tr><td>IPS LCD</td><td>MOSI</td><td>CLK</td><td>DC</td><td>RST</td><td>CS</td></tr>
|
||||
</table>
|
||||
|
||||
**PH2.0 PORT**
|
||||
**HY2.0 PORT**
|
||||
|
||||
<table>
|
||||
<tr><td>ESP32 </td><td>GPIO33</td><td>GPIO32</td><td>5V</td><td>GND</td></tr>
|
||||
<tr><td>PH2.0 port</td><td>SCL</td><td>SDA</td><td>5V</td><td>GND</td></tr>
|
||||
<tr><td>HY2.0 port</td><td>SCL</td><td>SDA</td><td>5V</td><td>GND</td></tr>
|
||||
</table>
|
||||
|
||||
**MIC (SPM1423)**
|
||||
|
||||
@@ -11,7 +11,7 @@ V-Function is a series of **visual recognition** function firmware developed by
|
||||
## Description
|
||||
|
||||
**UNIT-V** is the new AI Camera powered by Kendryte K210 .An edge computing system-on-chip(SoC) with dual-core 64bit RISC-V CPU and state-of-art neural network processor.UNIT-V AI Camera features its integration with machine vision capabilities, featuring the unprocessed acceptability to AI Visioning with high energy efficiency and low cost. We co-oped with Sipeed providing the MicroPython environment makes programming on UNIT-V easier.
|
||||
Support MicroPython development environment, which makes the program code more concise when you use UNIT-V for project development.Equipped with OV2640 (2 megapixel) image sensor, it is an ideal choice for machine vision project.It is equipped with two programmable keys and an RGB LED indicator on the front for convenient status display.At the bottom, there is a PH2.0*4P interface and a type-C interface compatible with grove, which is convenient to connect with the main controllor. Support TF card to expand memory, related material and model file call more convenient.
|
||||
Support MicroPython development environment, which makes the program code more concise when you use UNIT-V for project development.Equipped with OV2640 (2 megapixel) image sensor, it is an ideal choice for machine vision project.It is equipped with two programmable keys and an RGB LED indicator on the front for convenient status display.At the bottom, there is a HY2.0*4P interface and a type-C interface compatible with grove, which is convenient to connect with the main controllor. Support TF card to expand memory, related material and model file call more convenient.
|
||||
|
||||
<img src="assets/img/product_pics/unit/unit-v/unit_v_05.webp" width="30%" height="30%">
|
||||
|
||||
@@ -33,7 +33,7 @@ Support MicroPython development environment, which makes the program code more c
|
||||
- Button: button * 2
|
||||
- Indicator light: WS2812 LED
|
||||
- External storage: TF card/Micro SD
|
||||
- Interface: PH2.0/compatible GROVE
|
||||
- Interface: HY2.0/compatible GROVE
|
||||
|
||||
|
||||
## Include
|
||||
|
||||
@@ -6,7 +6,7 @@
|
||||
|
||||
## 描述
|
||||
|
||||
**ATOM HUB SWITCH** 是一款支持ATOM的双路控制可编程开关，可同时接入两路交流/直流电路进行通断控制。内置降压模块可为ATOM提供5V/1A的直流电源，板载继电器最高支持250V/10A市电（16A瞬时电流），为了保障使用安全，其直流电路具备过热与短路保护功能，当电流过大或发生短路时能有效断开电路。为了方便用户在工业场景中使用，我们内置了一颗SP485EE电平转换芯片，提供一组RS485接口供用户连接RS485设备，RS485具备为ATOM供电的能力，支持电压为9-24V。此外还提供了一组PH2.0接口用于连接I2C外设或通用I/O设备。借助于ATOM的蓝牙与WIFI功能，您可以轻松实现远程遥控开关设备，如果您有多个ATOM HUB SWITCH，可以通过RS485接口进行并联。
|
||||
**ATOM HUB SWITCH** 是一款支持ATOM的双路控制可编程开关，可同时接入两路交流/直流电路进行通断控制。内置降压模块可为ATOM提供5V/1A的直流电源，板载继电器最高支持250V/10A市电（16A瞬时电流），为了保障使用安全，其直流电路具备过热与短路保护功能，当电流过大或发生短路时能有效断开电路。为了方便用户在工业场景中使用，我们内置了一颗SP485EE电平转换芯片，提供一组RS485接口供用户连接RS485设备，RS485具备为ATOM供电的能力，支持电压为9-24V。此外还提供了一组HY2.0接口用于连接I2C外设或通用I/O设备。借助于ATOM的蓝牙与WIFI功能，您可以轻松实现远程遥控开关设备，如果您有多个ATOM HUB SWITCH，可以通过RS485接口进行并联。
|
||||
|
||||
## 产品特性
|
||||
|
||||
@@ -14,7 +14,7 @@
|
||||
- 内置AC-DC电路供电
|
||||
- 2路继电器
|
||||
- 内置RS485电平转换，支持Modbus
|
||||
- PH2.0扩展
|
||||
- HY2.0扩展
|
||||
- 短路过热保护
|
||||
- 可通过蓝牙、WIFI、RS485进行遥控
|
||||
|
||||
@@ -56,7 +56,7 @@
|
||||
</tr>
|
||||
<tr>
|
||||
<td>接口</td>
|
||||
<td>1x PH2.0(PORT A)， 1x VH3.96 4P(RS485), 2x VH3.96 3P(Relay), 1x VH3.96 3P(AC/DC IN)</td>
|
||||
<td>1x HY2.0(PORT A)， 1x VH3.96 4P(RS485), 2x VH3.96 3P(Relay), 1x VH3.96 3P(AC/DC IN)</td>
|
||||
</tr>
|
||||
<tr>
|
||||
<td>净重</td>
|
||||
|
||||
@@ -6,7 +6,7 @@
|
||||
|
||||
## 描述
|
||||
|
||||
**ATOM Lite** 是M5Stack开发套件系列中一款非常小巧的开发板，其大小只有24 * 24mm，提供更多GPIO供用户自定义，非常适合做嵌入式的智能硬件开发。主控采用了ESP32-PICO-D4方案，集成Wi-Fi和蓝牙模块，内置3D天线，拥有4MB的SPI闪存，提供Infra-Red、RGB Led、按键和GROVE/PH2.0接口。板载Type-C接口可以快速实现程序上传下载，背面具有一个M2螺丝孔用于固定。
|
||||
**ATOM Lite** 是M5Stack开发套件系列中一款非常小巧的开发板，其大小只有24 * 24mm，提供更多GPIO供用户自定义，非常适合做嵌入式的智能硬件开发。主控采用了ESP32-PICO-D4方案，集成Wi-Fi和蓝牙模块，内置3D天线，拥有4MB的SPI闪存，提供Infra-Red、RGB Led、按键和GROVE/HY2.0接口。板载Type-C接口可以快速实现程序上传下载，背面具有一个M2螺丝孔用于固定。
|
||||
|
||||
## 产品特性
|
||||
|
||||
|
||||
@@ -8,7 +8,7 @@
|
||||
|
||||
## 描述
|
||||
|
||||
**ATOM Matrix** 是M5Stack开发套件系列中一款非常小巧的开发板，其大小只有24 * 24mm，提供更多GPIO供用户自定义，非常适合做嵌入式的智能硬件。主控采用ESP32-PICO-D4方案，集成Wi-Fi和蓝牙模块，拥有4MB的SPI闪存，板载Infra-Red，面板上有5*5 RGB Led矩阵、内置IMU姿态传感器（MPU6886),在Neo Led矩阵下方隐藏一颗可编程按键，板载Type-C接口可以快速实现程序上传下载，此外还提供一个PH2.0 4P接口用于连接外设。背面具有一个M2螺丝孔用于固定。
|
||||
**ATOM Matrix** 是M5Stack开发套件系列中一款非常小巧的开发板，其大小只有24 * 24mm，提供更多GPIO供用户自定义，非常适合做嵌入式的智能硬件。主控采用ESP32-PICO-D4方案，集成Wi-Fi和蓝牙模块，拥有4MB的SPI闪存，板载Infra-Red，面板上有5*5 RGB Led矩阵、内置IMU姿态传感器（MPU6886),在Neo Led矩阵下方隐藏一颗可编程按键，板载Type-C接口可以快速实现程序上传下载，此外还提供一个HY2.0 4P接口用于连接外设。背面具有一个M2螺丝孔用于固定。
|
||||
|
||||
<mark>注意：RGB LED的亮度限制为20，因此请不要将其设置过高的亮度数值，以免损坏LED和亚克力屏幕。</mark>
|
||||
|
||||
|
||||
@@ -6,7 +6,7 @@
|
||||
|
||||
## 描述
|
||||
|
||||
**M5StickT** 是一款精致小巧的红外热成像仪,采用最新的FLIR Lepton 3.0长波红外（LWIR）摄像头内核,有效分辨率为160*120,成像画面清晰稳定,是大面积非接触式红外测温的优秀解决方案.其主控芯片采用了ESP32,支持WIFI与蓝牙连接,高达240Mhz的运算能力,为图像输出提供了有利保证,FPS达到7+.屏幕为1.14寸,分辨率135 * 240,此外内置硬件资源也较为丰富,在交互操作方面提供了两个可编程按键和一个拨轮编码器.内部板载一个6轴IMU(MPU6886),麦克风(SPM1423),电源管理芯片为AXP192,并内置300mAh电池.为了方便用户连接外设,在侧面提供了一个4P PH2.0接口.机身为黑色尼龙材质通过3D打印而成,此外在机身的下方提供一个M3螺丝孔和一个1/4螺丝孔用于固定.在固件方面,提供了多达5种色彩显示模式,可指定测量最大最小值或中心值,并且显示温度色域范围可调.
|
||||
**M5StickT** 是一款精致小巧的红外热成像仪,采用最新的FLIR Lepton 3.0长波红外（LWIR）摄像头内核,有效分辨率为160*120,成像画面清晰稳定,是大面积非接触式红外测温的优秀解决方案.其主控芯片采用了ESP32,支持WIFI与蓝牙连接,高达240Mhz的运算能力,为图像输出提供了有利保证,FPS达到7+.屏幕为1.14寸,分辨率135 * 240,此外内置硬件资源也较为丰富,在交互操作方面提供了两个可编程按键和一个拨轮编码器.内部板载一个6轴IMU(MPU6886),麦克风(SPM1423),电源管理芯片为AXP192,并内置300mAh电池.为了方便用户连接外设,在侧面提供了一个4P HY2.0接口.机身为黑色尼龙材质通过3D打印而成,此外在机身的下方提供一个M3螺丝孔和一个1/4螺丝孔用于固定.在固件方面,提供了多达5种色彩显示模式,可指定测量最大最小值或中心值,并且显示温度色域范围可调.
|
||||
|
||||
**开关机操作：**
|
||||
|
||||
@@ -32,7 +32,7 @@
|
||||
- 带有拨轮编码器与可编程按键
|
||||
- 内置电源管理芯片
|
||||
- 内置锂电池供电
|
||||
- 支持拓展的GROVE/PH2.0接口
|
||||
- 支持拓展的GROVE/HY2.0接口
|
||||
|
||||
|
||||
## 包含
|
||||
@@ -194,11 +194,11 @@
|
||||
<tr><td>IPS 屏幕</td><td>MOSI</td><td>CLK</td><td>DC</td><td>RST</td><td>CS</td></tr>
|
||||
</table>
|
||||
|
||||
**PH2.0 接口**
|
||||
**HY2.0 接口**
|
||||
|
||||
<table>
|
||||
<tr><td>ESP32 芯片</td><td>GPIO33</td><td>GPIO32</td><td>5V</td><td>GND</td></tr>
|
||||
<tr><td>PH2.0 接口</td><td>SCL</td><td>SDA</td><td>5V</td><td>GND</td></tr>
|
||||
<tr><td>HY2.0 接口</td><td>SCL</td><td>SDA</td><td>5V</td><td>GND</td></tr>
|
||||
</table>
|
||||
|
||||
**麦克风 MIC (SPM1423)**
|
||||
|
||||
@@ -10,7 +10,7 @@ V-Function是由M5Stack团队针对V系列设备开发的多个**视觉识别**
|
||||
|
||||
## 描述
|
||||
|
||||
**UNIT-V**是一款搭载Kendryte K210的AI视觉处理摄像头单元，集成双核64位RISC-V CPU和最先进的神经网络处理器边缘计算片上系统.UNIT-V AI摄像头体积非常小巧，适合嵌入到各种设备当中，具备机器视觉处理能力，支持多种图像识别能力（ 如实时获取被检测目标的大小与坐标 • 实时获取被检测目标的种类），并且能够在低功耗情况下进行卷积神经网络计算，因此UNIT-V会是一个很好的零门槛机器视觉嵌入式解决方案.它支持MicroPython开发环境，这使得你在使用UNIT-V上进行项目开发时，程序代码将会更加精简.搭载OV2640 200万像素图像传感器，是机器视觉项目的理想选择.机身配备两个可编程按键，正面有一颗RGB LED指示灯，方便进行状态显示.底部提供一个兼容GROVE的PH2.0*4P接口和一个TYPE-C接口，可以与主控设备进行连接.支持TF卡扩展内存，相关素材及模型文件调用使用更方便.
|
||||
**UNIT-V**是一款搭载Kendryte K210的AI视觉处理摄像头单元，集成双核64位RISC-V CPU和最先进的神经网络处理器边缘计算片上系统.UNIT-V AI摄像头体积非常小巧，适合嵌入到各种设备当中，具备机器视觉处理能力，支持多种图像识别能力（ 如实时获取被检测目标的大小与坐标 • 实时获取被检测目标的种类），并且能够在低功耗情况下进行卷积神经网络计算，因此UNIT-V会是一个很好的零门槛机器视觉嵌入式解决方案.它支持MicroPython开发环境，这使得你在使用UNIT-V上进行项目开发时，程序代码将会更加精简.搭载OV2640 200万像素图像传感器，是机器视觉项目的理想选择.机身配备两个可编程按键，正面有一颗RGB LED指示灯，方便进行状态显示.底部提供一个兼容GROVE的HY2.0*4P接口和一个TYPE-C接口，可以与主控设备进行连接.支持TF卡扩展内存，相关素材及模型文件调用使用更方便.
|
||||
|
||||
<img src="assets/img/product_pics/unit/unit-v/unit_v_05.webp" width="30%" height="30%">
|
||||
|
||||
|
||||
Reference in New Issue
Block a user