mirror of
https://github.com/m5stack/m5-docs.git
synced 2026-05-20 10:23:01 -07:00
update some product info
This commit is contained in:
Gitshaoxiang
Binary file not shown.
|
Before Width: | Height: | Size: 30 KiB After Width: | Height: | Size: 143 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 11 KiB After Width: | Height: | Size: 93 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 49 KiB After Width: | Height: | Size: 93 KiB |
@@ -6,11 +6,11 @@
|
||||
|
||||
## Description
|
||||
|
||||
**Watch** is an M5Core watch set. In addition to being a powerful development hardware, the M5Core has a sophisticated look that gives it the possibility to wear smart. The kit is designed for the M5Core series,Compared with the old 3D printing base, the new model uses a mold, which has a qualitative improvement in appearance and quality. in addition to the cool strap. Also equipped with a 700mAh lithium battery, allowing users to have sufficient reliable endurance while using the device.
|
||||
**Watch** is an M5Core watch set. In addition to being a powerful development hardware, the M5Core has a sophisticated look that gives it the possibility to wear smart. The kit is designed for the M5Core series,Compared with the old 3D printing base, the new model uses a mold, which has a qualitative improvement in appearance and quality. in addition to the cool strap. Also equipped with a 650mAh lithium battery, allowing users to have sufficient reliable endurance while using the device.
|
||||
|
||||
## Product Features
|
||||
|
||||
- 700mAh lithium battery
|
||||
- 650mAh lithium battery
|
||||
|
||||
## Weight and Size
|
||||
|
||||
@@ -26,7 +26,7 @@
|
||||
## Include
|
||||
|
||||
- 1x strap base
|
||||
- 1x 700mAh battery
|
||||
- 1x 650mAh battery
|
||||
- 2x telescopic card pin
|
||||
- 2x M3x15 screws
|
||||
- 1x hex wrench
|
||||
|
||||
@@ -45,8 +45,10 @@ M5Stack Basic is consist with two separable parts. The upside part has all kinds
|
||||
|
||||
<table class="table-1">
|
||||
<thead>
|
||||
<tr>
|
||||
<th>Resources</th>
|
||||
<th>Parameter</th>
|
||||
</tr>
|
||||
</thead>
|
||||
<tbody>
|
||||
<tr>
|
||||
|
||||
@@ -343,6 +343,11 @@ For more information about Pin assignment and Pin Remapping, Please refer to [ES
|
||||
<td>2019.7</td>
|
||||
<td>TN screen changed to IPS screen</td>
|
||||
</tr>
|
||||
<tr>
|
||||
<td>2020.3</td>
|
||||
<td>Battery capacity changed from 150mAh to 110mAh</td>
|
||||
<td>/</td>
|
||||
</tr>
|
||||
<tbody>
|
||||
</table>
|
||||
</div>
|
||||
|
||||
@@ -16,10 +16,14 @@
|
||||
|
||||
- Chargable
|
||||
- Battery replaceable
|
||||
- 2200mAh rechargeable battery
|
||||
- Dimensions: 150mm x 25mm x 25mm
|
||||
- Single product weight: 277g
|
||||
|
||||
## Include
|
||||
|
||||
- 1x 18650 HAT（include 2000mAh battery)
|
||||
- 1x 18650 HAT（include 2200mAh battery)
|
||||
|
||||
|
||||
<script>
|
||||
|
||||
|
||||
@@ -49,7 +49,7 @@ The Bugc base needs to be used in conjunction with the M5StickC controller. The
|
||||
## Include
|
||||
|
||||
- 1x BugC base
|
||||
- 1x 16340 Battery(700mAh)
|
||||
- 1x 16340 Battery(750mAh)
|
||||
|
||||
## EasyLoader
|
||||
|
||||
|
||||
@@ -6,7 +6,7 @@
|
||||
|
||||
## Description
|
||||
|
||||
**RoverC** is a programmable, omnidirectional mobile robot base compatible with M5stickC, and can be started by inserting the M5stickC. The main controller of the base is the stm32f030f4 microcontroller. The base comes with N20 worm gear motors which are directly driven by a four-channel motor driver. These motors are connected to mecanum wheels which can move in all directions. In addition, two grove compatible I2C ports are provided to facilitate the expansion for other modules. The base is also compatible with LEGO bricks and can be expanded in structure. A 16340 battery is installed on the back of the base to meet the power and endurance requirements of the car and can be controlled by an independent switch.
|
||||
**RoverC** is a programmable, omnidirectional mobile robot base compatible with M5stickC, and can be started by inserting the M5stickC. The main controller of the base is the stm32f030f4 microcontroller. The base comes with N20 worm gear motors which are directly driven by a four-channel motor driver. These motors are connected to mecanum wheels which can move in all directions. In addition, two grove compatible I2C ports are provided to facilitate the expansion for other modules. The base is also compatible with LEGO bricks and can be expanded in structure. A 18350 battery is installed on the back of the base to meet the power and endurance requirements of the car and can be controlled by an independent switch.
|
||||
|
||||
<img src="assets\img\product_pics\hat\roverc_hat\roverc_hat_05.webp" width="40%" height="30%">
|
||||
|
||||
@@ -19,7 +19,7 @@
|
||||
- Four-channel motor driver
|
||||
- LEGO compatible
|
||||
- Extra Grove ports for expansion
|
||||
- Equipped with 16340 battery holder
|
||||
- Equipped with 18350(900mAh) battery holder
|
||||
- Flexible movement in all directions
|
||||
- Size: 75mm * 75mm * 55mm
|
||||
- Weight：213g(include Battery)
|
||||
@@ -64,7 +64,7 @@ MotorControl：
|
||||
|
||||
## Package Includes
|
||||
|
||||
- 1x RoverC base(includes 750mAh Battery)
|
||||
- 1x RoverC base(includes 18350(900mAh) Battery)
|
||||
|
||||
## EasyLoader
|
||||
|
||||
@@ -88,6 +88,33 @@ Use alone [here](https://github.com/m5stack/M5-ProductExampleCodes/tree/master/A
|
||||
|
||||
<img src="assets\img\product_pics\hat\roverc_hat\roverC.webp" width="40%" height="30%">
|
||||
|
||||
|
||||
|
||||
## Version Change
|
||||
|
||||
<table>
|
||||
<thead>
|
||||
<tr>
|
||||
<th>Release Date</th>
|
||||
<th>Product Change</th>
|
||||
<th>Note:</th>
|
||||
</tr>
|
||||
</thead>
|
||||
<tbody>
|
||||
<tr>
|
||||
<td>2019.11</td>
|
||||
<td>Initial public release</td>
|
||||
<td>/</td>
|
||||
</tr>
|
||||
<tr>
|
||||
<td>2020.5</td>
|
||||
<td>Battery changed from 16340(750mAh) to 18350(900mAh)</td>
|
||||
<td>/</td>
|
||||
</tr>
|
||||
</tbody>
|
||||
</table>
|
||||
|
||||
|
||||
<script>
|
||||
|
||||
var purchase_link = 'https://m5stack.com/collections/all/products/rovercw-o-m5stickc';
|
||||
|
||||
@@ -6,12 +6,12 @@
|
||||
|
||||
## Description
|
||||
|
||||
**PLUS** is a enhanced M5 module comes with Lipo battery(400mAh), gear potentiometer, IR transmitter, extend PORT B(GPIO Port), PORT C(UART Port) from M5 core and a Microphone soldering pad. Powered with MEGA328, it could be a great upgrade of the hardwre resources by adding up PLUS to your work.
|
||||
**PLUS** is a enhanced M5 module comes with Lipo battery(500mAh), gear potentiometer, IR transmitter, extend PORT B(GPIO Port), PORT C(UART Port) from M5 core and a Microphone soldering pad. Powered with MEGA328, it could be a great upgrade of the hardwre resources by adding up PLUS to your work.
|
||||
|
||||
## Product Features
|
||||
|
||||
- IIC address:(0x62)
|
||||
- 400mAh Battery
|
||||
- 500mAh Battery
|
||||
- Programmable gear potentiometer
|
||||
- IR transmitter
|
||||
- Including PORT B and PORT C
|
||||
|
||||
+37
-11
@@ -16,18 +16,7 @@ Terminal blocks are used to secure and/or terminate wires and, in their simplest
|
||||
|
||||
- 1x HT3.96 connector(4 pins)
|
||||
- 2x Lego cpmpatible holes
|
||||
- Product Size：32.2mm x 24.2mm x 11.2mm
|
||||
- Product weight：7.5g
|
||||
|
||||
### Connector Specifications
|
||||
|
||||
- Type: Plug, Female Sockets
|
||||
- Number of Positions: 4
|
||||
- Positions Per Level: 4
|
||||
- Number of Levels: 1
|
||||
- Pitch: 0.156"（3.96mm）
|
||||
- Header Orientation: -
|
||||
- Mounting Type: Free-hanging
|
||||
|
||||
## Include
|
||||
|
||||
@@ -35,6 +24,43 @@ Terminal blocks are used to secure and/or terminate wires and, in their simplest
|
||||
- 1x Grove Cable
|
||||
- 1x HT3.96 Male Socket
|
||||
|
||||
## Specification
|
||||
|
||||
<table class="table-1">
|
||||
<thead>
|
||||
<tr>
|
||||
<th>Resources</th>
|
||||
<th>Parameter</th>
|
||||
</tr>
|
||||
</thead>
|
||||
<tbody>
|
||||
<tr>
|
||||
<td>Type</td>
|
||||
<td>Pluggable terminal block (female)</td>
|
||||
</tr>
|
||||
<tr>
|
||||
<td>PIN bit</td>
|
||||
<td>4</td>
|
||||
</tr>
|
||||
<tr>
|
||||
<td>Total</td>
|
||||
<td>1 group</td>
|
||||
</tr>
|
||||
<tr>
|
||||
<td>spacing</td>
|
||||
<td>0.156 "(3.96mm)</td>
|
||||
</tr>
|
||||
<tr>
|
||||
<td>Pin specifications</td>
|
||||
<td>180 ° horizontal</td>
|
||||
</tr>
|
||||
<tr>
|
||||
<td>Installation type</td>
|
||||
<td>Inline </td>
|
||||
</tr>
|
||||
</tbody>
|
||||
</table>
|
||||
|
||||
<script>
|
||||
|
||||
var purchase_link = 'https://m5stack.com/collections/m5-unit/products/3-96-transfer-unit';
|
||||
|
||||
+37
-6
@@ -19,16 +19,13 @@ By measuring the amount of static acceleration due to gravity, you can find out
|
||||
|
||||
### Product Features
|
||||
|
||||
- Supply voltage range: 2.0 V to 3.6 V
|
||||
- Ultralow power: as low as 23 µA in measurement mode and 0.1 µA in standby mode at VS = 2.5 V (typical)
|
||||
- Ultralow power
|
||||
- Single tap/double tap detection
|
||||
- Activity/inactivity monitoring
|
||||
- Free-fall detection
|
||||
- I/O voltage range: 1.7 V to VS
|
||||
- I2C digital interfaces
|
||||
- Wide temperature range (−40°C to +85°C)
|
||||
- Product Size：32.2mm x 24.2mm x 8.1mm
|
||||
- Product weight：3.9g
|
||||
- Wide temperature range
|
||||
|
||||
|
||||
## Include
|
||||
|
||||
@@ -41,6 +38,40 @@ By measuring the amount of static acceleration due to gravity, you can find out
|
||||
- Navigation
|
||||
- Orientation sensing
|
||||
|
||||
## Specification
|
||||
|
||||
<table class="table-1">
|
||||
<thead>
|
||||
<tr>
|
||||
<th>Resources</th>
|
||||
<th>Parameter</th>
|
||||
</tr>
|
||||
</thead>
|
||||
<tbody>
|
||||
<tr>
|
||||
<td> Measurement range </td>
|
||||
<td> ± 16g </td>
|
||||
</tr>
|
||||
<tr>
|
||||
<td> Resolution </td>
|
||||
<td> The resolution of 10-bit fixed resolution increases with the increase of g range, up to 13 bits at ± 16 g </td>
|
||||
</tr>
|
||||
<tr>
|
||||
<td> Power consumption </td>
|
||||
<td> When VS = 2.5 V (typical), as low as 23 µA in measurement mode and 0.1 µA in standby mode </td>
|
||||
</tr>
|
||||
<tr>
|
||||
<td> I / O voltage range </td>
|
||||
<td> 1.7 V to VS </td>
|
||||
</tr>
|
||||
<tr>
|
||||
<td> Working temperature </td>
|
||||
<td> −40 ° C to + 85 ° C </td>
|
||||
</tr>
|
||||
</tbody>
|
||||
</table>
|
||||
|
||||
|
||||
## Dcumentation
|
||||
|
||||
- Datasheet - **[ADXL345](https://m5stack.oss-cn-shenzhen.aliyuncs.com/resource/docs/datasheet/unit/ADXL345_en.pdf)**
|
||||
|
||||
+44
-4
@@ -32,17 +32,57 @@ GAIN = 1, 2, 4, OR 8
|
||||
- Product Size：32.5mm x 24.1mm x 10.2mm
|
||||
- Product weight：5.9g
|
||||
|
||||
## Include
|
||||
|
||||
- 1x ADC unit
|
||||
- 1x GROVE Cable
|
||||
- 1x HT3.96 Male Socket(2 pins)
|
||||
|
||||
## Applications
|
||||
|
||||
- ECG signal acquisition
|
||||
- Blood pressure measurement
|
||||
- Dynamometer
|
||||
|
||||
## Include
|
||||
|
||||
- 1x ADC unit
|
||||
- 1x GROVE Cable
|
||||
- 1x HT3.96 Male Socket(2 pins)
|
||||
## Specification
|
||||
|
||||
<table class="table-1">
|
||||
<thead>
|
||||
<tr>
|
||||
<th>Resources</th>
|
||||
<th>Parameter</th>
|
||||
</tr>
|
||||
</thead>
|
||||
<tbody>
|
||||
<tr>
|
||||
<td> INL </td>
|
||||
<td> The full scale is 0.0125% of the range (maximum value) </td>
|
||||
</tr>
|
||||
<tr>
|
||||
<td> Gain multiple </td>
|
||||
<td> 1, 2, 4, 8 </td>
|
||||
</tr>
|
||||
<tr>
|
||||
<td> Programming rate </td>
|
||||
<td> 8SPS to 128SPS </td>
|
||||
</tr>
|
||||
<tr>
|
||||
<td> Working voltage range </td>
|
||||
<td> 2.7 V to 5.5 V </td>
|
||||
</tr>
|
||||
<tr>
|
||||
<td> Current </td>
|
||||
<td> 90µA </td>
|
||||
</tr>
|
||||
<tr>
|
||||
<td> Noise </td>
|
||||
<td> 4μVp-p </td>
|
||||
</tr>
|
||||
</tbody>
|
||||
</table>
|
||||
|
||||
|
||||
|
||||
## Related Link
|
||||
|
||||
|
||||
@@ -34,6 +34,25 @@ The Unit's Grove interface is black, specify it is an analog interface that shou
|
||||
- 1x ANGLE Unit
|
||||
- 1x Grove Cable
|
||||
|
||||
|
||||
## Specification
|
||||
|
||||
<table class="table-1">
|
||||
<thead>
|
||||
<tr>
|
||||
<th>Resources</th>
|
||||
<th>Parameter</th>
|
||||
</tr>
|
||||
</thead>
|
||||
<tbody>
|
||||
<tr>
|
||||
<td> Output voltage </td>
|
||||
<td> 0 ~ 2500mV </td>
|
||||
</tr>
|
||||
</tbody>
|
||||
</table>
|
||||
|
||||
|
||||
## EasyLoader
|
||||
|
||||
>EasyLoader is a concise and fast program writer, which has a built-in case program related to the product. It can be burned to the main control by simple steps to perform a series of function verification. Please install the corresponding driver according to the device type. M5Core host [Please click here to view the CP210X driver installation tutorial](en/arduino/arduino_development), M5StickC/V/T/ATOM series can be used without driver)
|
||||
|
||||
@@ -37,6 +37,32 @@ So,
|
||||
- Fashion Tech
|
||||
- Stem Education
|
||||
|
||||
## Specification
|
||||
|
||||
<table class="table-1">
|
||||
<thead>
|
||||
<tr>
|
||||
<th>Resources</th>
|
||||
<th>Parameter</th>
|
||||
</tr>
|
||||
</thead>
|
||||
<tbody>
|
||||
<tr>
|
||||
<td> Battery capacity </td>
|
||||
<td> 120mA </td>
|
||||
</tr>
|
||||
<tr>
|
||||
<td> RGB LED </td>
|
||||
<td> x 18 </td>
|
||||
</tr>
|
||||
<tr>
|
||||
<td> Communication method </td>
|
||||
<td> UART </td>
|
||||
</tr>
|
||||
</tbody>
|
||||
</table>
|
||||
|
||||
|
||||
## PinMap
|
||||
|
||||
**Mega328 ISP**Download interface Pin foot definition
|
||||
|
||||
+33
-2
@@ -27,8 +27,6 @@ It also can achieve button combination(Sym+Key, Shift+Key, Fn+Key) and output ri
|
||||
- Full-function keyboard, multi-key combination
|
||||
- GROVE interface, support [UIFlow](http://flow.m5stack.com) and [Arduino](http://www.arduino.cc)
|
||||
- Two Lego compatible holes
|
||||
- Product Size：84.6mm x 54.2mm x 6.5mm
|
||||
- Product weight：20.1g
|
||||
|
||||
## Include
|
||||
|
||||
@@ -39,6 +37,39 @@ It also can achieve button combination(Sym+Key, Shift+Key, Fn+Key) and output ri
|
||||
|
||||
- Keyboard peripherals for M5Stack Core
|
||||
|
||||
## Specification
|
||||
|
||||
<table class="table-1">
|
||||
<thead>
|
||||
<tr>
|
||||
<th>Resources</th>
|
||||
<th>Parameter</th>
|
||||
</tr>
|
||||
</thead>
|
||||
<tbody>
|
||||
<tr>
|
||||
<td>Numberofkeys</td>
|
||||
<td>50</td>
|
||||
</tr>
|
||||
<tr>
|
||||
<td>RGBLED</td>
|
||||
<td>x1</td>
|
||||
</tr>
|
||||
<tr>
|
||||
<td>Communicationmethod</td>
|
||||
<td>IIC</td>
|
||||
</tr>
|
||||
<tr>
|
||||
<td>Size</td>
|
||||
<td>84.6mm x 54.2mm x 6.5mm</td>
|
||||
</tr>
|
||||
<tr>
|
||||
<td>Weight</td>
|
||||
<td>20.1g</td>
|
||||
</tr>
|
||||
</tbody>
|
||||
</table>
|
||||
|
||||
## Related Link
|
||||
|
||||
- **[CardKB Firmware](https://github.com/m5stack/M5-ProductExampleCodes/tree/master/Unit/CARDKB/firmware_328p/CardKeyBoard)**
|
||||
|
||||
@@ -23,6 +23,27 @@ Alternative Port: A, B, C
|
||||
- 1x CATEAR Unit
|
||||
- 1x Grove Cable(1m)
|
||||
|
||||
## Specification
|
||||
|
||||
<table class="table-1">
|
||||
<thead>
|
||||
<tr>
|
||||
<th>Resources</th>
|
||||
<th>Parameter</th>
|
||||
</tr>
|
||||
</thead>
|
||||
<tbody>
|
||||
<tr>
|
||||
<td>Numberoflampbeads</td>
|
||||
<td>118</td>
|
||||
</tr>
|
||||
<tr>
|
||||
<td>RGBLED</td>
|
||||
<td>SK6812</td>
|
||||
</tr>
|
||||
</tbody>
|
||||
</table>
|
||||
|
||||
## Example
|
||||
|
||||
### 1. Arduino IDE
|
||||
|
||||
+35
-2
@@ -32,8 +32,6 @@ This Unit communicates with the M5Core via the GROVE A interface(I2C). Address i
|
||||
- Detection range: -40℃~85℃
|
||||
- GROVE interface, support [UIFlow](http://flow.m5stack.com) and [Arduino](http://www.arduino.cc)
|
||||
- Two Lego-compatible holes
|
||||
- Product Size：32.2mm x 24.2mm x 8.2mm
|
||||
- Product weight：3.9g
|
||||
|
||||
## Include
|
||||
|
||||
@@ -45,6 +43,41 @@ This Unit communicates with the M5Core via the GROVE A interface(I2C). Address i
|
||||
- Product Color Verification
|
||||
- Color tracking robot
|
||||
|
||||
|
||||
## Specification
|
||||
|
||||
<table class="table-1">
|
||||
<thead>
|
||||
<tr>
|
||||
<th>Resources</th>
|
||||
<th>Parameter</th>
|
||||
</tr>
|
||||
</thead>
|
||||
<tbody>
|
||||
<tr>
|
||||
<td>IC</td>
|
||||
<td>TCS3472</td>
|
||||
</tr>
|
||||
<tr>
|
||||
<td>Workingtemperaturerange</td>
|
||||
<td>-40°C~85°C</td>
|
||||
</tr>
|
||||
<tr>
|
||||
<td>Communicationmethod</td>
|
||||
<td>IIC</td>
|
||||
</tr>
|
||||
<tr>
|
||||
<td>Size</td>
|
||||
<td>32.2x24.2x8.2mm</td>
|
||||
</tr>
|
||||
<tr>
|
||||
<td>Weight</td>
|
||||
<td>3.9g</td>
|
||||
</tr>
|
||||
</tbody>
|
||||
</table>
|
||||
|
||||
|
||||
## Related Link
|
||||
|
||||
- **Datasheet** - [TCS3472](https://m5stack.oss-cn-shenzhen.aliyuncs.com/resource/docs/datasheet/unit/TCS3472_en.pdf)
|
||||
|
||||
@@ -47,9 +47,9 @@ what this software can do?
|
||||
| *Interface* | *OV2640 Pin*| *ESP32Cam* |
|
||||
| :------------------- | :--------:| :--------: |
|
||||
| SCCB Clock | SIOC | IO23 |
|
||||
| SCCB Data | SIOD | IO25 |
|
||||
| SCCB Data | SIOD | IO22 |
|
||||
| System Clock | XCLK | IO27 |
|
||||
| Vertical Sync | VSYNC | IO22 |
|
||||
| Vertical Sync | VSYNC | IO25 |
|
||||
| Horizontal Reference | HREF | IO26 |
|
||||
| Pixel Clock | PCLK | IO21 |
|
||||
| Pixel Data Bit 0 | D2 | IO17 |
|
||||
|
||||
@@ -6,11 +6,11 @@
|
||||
|
||||
## 描述
|
||||
|
||||
**Watch** 是一款M5Core手表套装，M5Core除了是一款功能强大的开发硬件以外，精致的外观赋予了它智能穿戴的可能，该套件专为M5Core系列设计，相比旧款的3D打印底座，新款使用了模具，在外观与质量上都有了质的提升，除了酷炫的表带以外还配备700mAh锂电池，让用户能够在使用设备的同时，有着足够可靠的续航能力.
|
||||
**Watch** 是一款M5Core手表套装，M5Core除了是一款功能强大的开发硬件以外，精致的外观赋予了它智能穿戴的可能，该套件专为M5Core系列设计，相比旧款的3D打印底座，新款使用了模具，在外观与质量上都有了质的提升，除了酷炫的表带以外还配备650mAh锂电池，让用户能够在使用设备的同时，有着足够可靠的续航能力.
|
||||
|
||||
## 产品特性
|
||||
|
||||
- 700mAh锂电池
|
||||
- 650mAh锂电池
|
||||
|
||||
## 重量尺寸
|
||||
|
||||
@@ -27,7 +27,7 @@
|
||||
## 包含
|
||||
|
||||
- 1x 表带底座
|
||||
- 1x 700mAh电池
|
||||
- 1x 650mAh电池
|
||||
- 2x 伸缩卡针
|
||||
- 2x M3x15螺丝
|
||||
- 1x 六角扳手
|
||||
|
||||
Some files were not shown because too many files have changed in this diff Show More
Reference in New Issue
Block a user