m5-docs/docs/en/accessory/watch.md

# Watch

<el-tag effect="plain">SKU:K009-F</el-tag>

<div class="product_pic"><img src="assets\img\product_pics\accessory\watch\watch_01.webp"><img src="assets\img\product_pics\accessory\watch\watch_02.webp"></div>

## Description

**Watch** is an M5Core watch set. In addition to being a powerful development hardware, the M5Core has a sophisticated look that gives it the possibility to wear smart. The kit is designed for the M5Core series,Compared with the old 3D printing base, the new model uses a mold, which has a qualitative improvement in appearance and quality. in addition to the cool strap. Also equipped with a 650mAh lithium battery, allowing users to have sufficient reliable endurance while using the device.

?>Incompatible with M5Stack Core2

## Product Features

- 650mAh lithium battery

## Include

- 1x strap base
- 1x 650mAh battery
- 2x telescopic card pin
- 2x M3x15 screws
- 1x hex wrench
- 1x disassemble screwdriver

## Applications

- smart watch

## Specification

<table>
   <tr style="font-weight:bold">
      <td>Resources</td>
      <td>Parameter</td>
   </tr>
   <tr>
      <td>Watch strap</td>
      <td>260mm x 22mm 18g</td>
   </tr>
   <tr>
      <td>bottom</td>
      <td>54.3mm x 54.3mm x 7mm 25g</td>
   </tr>
   <tr>
      <td>Gross weight</td>
      <td>87g</td>
   </tr>
   <tr>
      <td>Product Size</td>
      <td>54.3 x 54.3 x 7mm</td>
   </tr>
   <tr>
      <td>Package Size</td>
      <td>125 x 67 x 23mm</td>
   </tr>
 </table>


## Assembly step

>Assembling the strap: Insert the matching telescopic card into the strap fixing hole, and have two small holes on both sides of the base of the watch. Place one side of the telescopic card pin into the hole and the other side with the finger. Press and place it. Complete the installation of another strap in the same way.

<img src="assets\img\product_pics\accessory\watch\watch_04.webp" width="80%">

>Install the battery: Plug the lead wire from the battery to the corresponding interface on the host circuit board. After the plug-in is completed, adjust the position of the battery to facilitate the installation of the watch base.

<img src="assets\img\product_pics\accessory\watch\watch_05.webp" width="80%">

>Installation base: According to the position of the BUS bus on the main unit, the watch base is vertically inserted into the main unit and locked with the matching screws to complete the assembly.

<img src="assets\img\product_pics\accessory\watch\watch_06.webp" width="80%">

<script>

   var purchase_link = 'https://m5stack.com/products/development-board-watch-kit-excluding-core';

   anchor_search(purchase_link);
   scrollFunc();

</script>