- Enable bootscript templating using `envsubst`.
- Add generic bootscript.
- Fix: `test` does not support `==`, but deceptively returns `true` in case you use it.
- De-duplicate kernel commandline console options.
- Change debug console from ttyS2 to ttyS0
- Remove SERIALCON from board configs
- Set console based on BOOT_SOC
- Enable UART0 in device tree for nanopi-r76s
* Khadas VIM4: U-Boot: Mod bootargs/defconfig and add bootscr support
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
* Khadas VIM4: Pull U-Boot from CoreELEC instead of Khadas
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
* Khadas VIM4: Remove setexpr bootargs sub rootfstype= from boot.cmd
This is no longer required
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
* Meson S4T7: family.conf: Add missing `mkdir -p "${tbasedir}"`
The toolchains fail to download because the dir isn't created
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
* Meson T7: Add rootfstype= to command line
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
* Khadas VIM4: Add extra boot arguments
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
* Remove `viraniac` as maintainer and add `rw` to cmdline
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
* Amlogic T7: Add `fsck.repair=yes` and `rootwait` to cmdline
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
* Amlogic T7: Move `${bootargs}` placement
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
---------
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
Co-authored-by: Igor <igor@armbian.com>
XpressReal(https://xpressreal.io/) is a family of Single Board Computers
developed in collaboration between Fyde Innovations, Radxa and Realtek.
XpressReal T3 is the first product in the family - a small form factor
high performance single board computer powered by the Realtek RTD1619B,
which runs FydeOS/openFyde and Linux!
Now we are adding the awesome Armbian Linux support for XpressReal T3!
This commit introduces some binary files that XpressReal T3 needed:
- firmware/realtek/rtd1619b
These binaries are the firmware for rtd1619b peripherals
(including the audio decoder, video decoder, etc.).
- u-boot-fw.tar.gz
This contains some co-processor firmware,
which needs to be loaded by u-boot in the early stage of boot.
- u-boot-prebuilt.tar.gz
These are hwsettings related files, used for tasks such as DDR initialization.
These files come from the rtd1619b SDK, which has already been open-sourced on our github:
- [firmware](https://github.com/XpressReal/linux-sdk/tree/main/meta-xpressreal/recipes-kernel/linux-firmware/files/rtd1619b)
- [u-boot prebuilts](https://github.com/XpressReal/linux-sdk/tree/main/meta-xpressreal/recipes-bsp/u-boot/files/prebuilt/rtd1619b)
Follow conventional `if-then-else-fi` constructions by not having `else` followed by semicolon. Hush is accepting, but other commonly used shells do not accept this.
- Added FDT resize/trim to allow big DT and overlays and still use
configured load addresses in case `setexpr` not available
- Moved FDT resize and next load address alignment
- Added filename information to load instructions
- Moved all "global" variable determinations to the top of the
bootscript
https://github.com/armbian/build/issues/8178
- Add switch to turn avoidance on/off
- Increment base address before alignment to resolve the oboe
- oboe observed in U-Boot v2021.04 and in particular with DT loading
- Updated names to reflect function better.
- Followed coding style of rest of the file, e.g. `test` instead of `itest` and `if ... ; then`.
- If `setexpr` fails, use configured addresses - either the ones defined in boot.cmd or set by armbianEnv.txt.
Now that upstream U-Boot has support for building K3 boot artifacts
we can drop using the ti-u-boot fork. Switch to v2025.01 and
adjust file names and add new dependencies as needed.
After that, the script successfully loads the DTB file from
two possible paths and overlays. If the file does not exist,
then the default file will be uploaded.
Use the DTB name from the u-boot default for the third
iteration if the provided DTB name was not found. Also
delete the duplicate of the previous iteration.
In the second iteration, we check the path that does not
contain the vendor folder. But this will also be done if
the real path contains the vendor's folder and the vendor's
name is contained in the DTB file name as
fdtfile=allwinner/sun50i-*-bananapi-*.dtb.
However, overlays will not be available.
Remove "allwinner/" from all board configurations that
use the boot script mechanism so that the script works
correctly.
Signed-off-by: The-going <48602507+The-going@users.noreply.github.com>
Tom Urlings
SuperKali
Austin Lane
c0rnelius
Jianfeng Liu
Wei
Igor Pecovnik
Dominik Wójt
Andrew Davis
The-going