mirror of
https://github.com/m5stack/M5Stack_MicroPython.git
synced 2026-05-20 10:14:44 -07:00
35 lines
1.2 KiB
Markdown
35 lines
1.2 KiB
Markdown
|
|
## Prebuilt firmwares
|
|
|
|
|
|
Default configuration is used.
|
|
|
|
Available firmwares:
|
|
|
|
| Directory | Description |
|
|
| - | - |
|
|
|**esp32** | MicroPython, single partition layout, 4MB Flash |
|
|
|**esp32_ota** | MicroPython, dual partition layout, OTA enabled, 4MB Flash |
|
|
|**esp32_psram** | MicroPython, single partition layout, 4MB Flash & 4MB SPIRAM |
|
|
|**esp32_psram_ota** | MicroPython, dual partition layout, OTA enabled, 4MB Flash & 4MB SPIRAM |
|
|
|**esp32_all** | MicroPython, single partition layout, 4MB Flash, ALL modules included |
|
|
|**esp32_psram_all** | MicroPython, single partition layout, 4MB Flash & 4MB SPIRAM, ALL modules included |
|
|
|
|
|
|
All firmwares are configured with 1 MB SPIFFS file system.<br>
|
|
Telnet server, FTP server, mDNS and Mqtt are enabled.
|
|
|
|
To flash, use **esptool.py**.<br>
|
|
If you don't have it installed, install it using `pip`:<br>
|
|
`pip install esptool` or `pip3 install esptool`
|
|
|
|
You can use the `flash.sh` script to flash the firmware:<br>
|
|
|
|
Change you working directory to the selected firmware directory (the one containing **MicroPython.bin**) and run:
|
|
|
|
```
|
|
../flash.sh -p <your_comm_port> -b <baud_rate>
|
|
```
|
|
|
|
`-p` & `-b` options are optional, default port is `/dev/ttyUSB0`, default baud rate is `460800`.
|