f35b5d28db
stmhal/pyexec.c: Make raw REPL mode 8-bit clean.
2015-04-19 21:30:49 +01:00
df5d9c77f4
cc3200: Fix bootloader and modpyb after printf overhaul.
...
The bootloader needs string0.c because of memset, memcpy and others,
without string0.c it magically links, but calling any of those
functions results in a hard fault.
In debug mode, modpyb needs printf, and including stdio.h leads to
conflicts due to the redefinitions made in the simplelink drivers.
2015-04-19 20:59:10 +02:00
d8475092d1
qemu-arm: Disable inline asm tests that use floating point.
2015-04-19 15:50:24 +01:00
5008972fef
py/inlinethumb: Support for core floating point instructions.
...
Adds support for the following Thumb2 VFP instructions, via the option
MICROPY_EMIT_INLINE_THUMB_FLOAT:
vcmp
vsqrt
vneg
vcvt_f32_to_s32
vcvt_s32_to_f32
vmrs
vmov
vldr
vstr
vadd
vsub
vmul
vdiv
2015-04-19 15:47:05 +01:00
d8cbbcaa9d
py: Fix builtin ord so that it can handle bytes values >= 0x80.
...
Addresses issue #1188 .
2015-04-19 12:26:46 +01:00
404b68da88
stmhal: Provide ADC capabilities for F401 and F411 MCUs.
...
Simply needed to define which pins have which ADC channel on them.
2015-04-18 22:39:06 +01:00
b42a5050fb
stmhal: Add support for STM32F411 MCU.
2015-04-18 22:15:59 +01:00
3e592531eb
stmhal: For flash storage use same params for F407 as F405.
2015-04-18 22:08:16 +01:00
90e6d0c2ac
stmhal: Add support for Espruino Pico board.
...
To build:
make BOARD=ESPRUINO_PICO
To deploy: short the BOOT0/BTN contact on the back of the board (eg by
drawing over it with a graphite pencil), then hold down BTN while
inserting the board into the USB port. The board should then enter DFU
mode, and the firmware can be downloaded using:
make BOARD=ESPRUINO_PICO deploy
2015-04-18 21:40:59 +01:00
e4b4e5aa31
stmhal: Add stm32f401.ld for linking F401 targets.
2015-04-18 21:40:59 +01:00
0435e76250
stmhal: Make ld and af files configurable within Makefile.
...
Each board now needs an mpconfigboard.mk file which defines AF_FILE and
LD_FILE.
Also moved stm32f405.ld to boards/ directory to keep things organised.
2015-04-18 21:40:59 +01:00
03ec6e4d01
stmhal: Add stm32f401_af.csv, for AF definitions of F401 MCUs.
2015-04-18 21:40:59 +01:00
9253e7bdf7
stmhal: Rename stm32f4xx_af.csv to stm32f405_af.csv.
...
Since this file is only valid for F405 MCUs, not generic F4xx.
2015-04-18 21:40:59 +01:00
6be0bbb886
stmhal: Add support for flash filesystem on F401 MCUs.
...
It uses a 16k cache buffer and so the filesystem size is limited.
2015-04-18 21:40:59 +01:00
5a11086d64
stmhal: Allow extint.c to compile without USB HS support.
2015-04-18 21:40:59 +01:00
d15fe5a6b3
stmhal: Make I2C busses and their pins configurable in mpconfigboard.h.
2015-04-18 21:40:59 +01:00
8892f71dd0
stmhal: Exclude code for UARTs that don't exist in hardware.
2015-04-18 21:40:58 +01:00
73f1a49137
stmhal: Exclude USB HS code when USB HS mode not enabled.
2015-04-18 21:40:58 +01:00
c92c7a69fd
stmhal: Exclude code for those timers that don't exist in the hardware.
2015-04-18 21:40:58 +01:00
7d6595fd18
stmhal: Make LCD initialiser use board pin names instead of cpu names.
2015-04-18 21:40:58 +01:00
50ea86fe8b
stmhal: For pins, define macros mapping board names to cpu names.
2015-04-18 21:40:58 +01:00
2e5704d101
stmhal: Make a HW config option for LED4 being controlled by PWM.
2015-04-18 21:40:58 +01:00
8bdbc20e74
stmhal: Make HSE PLL parameters configurable per board.
2015-04-18 21:40:58 +01:00
23008db6e1
README.md: Add the CC3200 port to the list of additional components.
2015-04-18 19:49:00 +02:00
e3cd154317
stmhal: Add support for sending and receiving CAN RTR messages.
2015-04-18 14:53:00 +01:00
Damien George
Daniel Campora
=
Henrik