Antonio Borneo 5d9dad6de1 stlink: add usb pid for v2.1 without mass storage device ...

New version of ST-Link/V2.1 without mass storage device.
From debug point of view, it is compatible with existing ST-Link/V2.1
It uses a new USB PID because the USB endpoints and interfaces are
different from usual ST-Link/V2.1

Add the new PID in the driver, in the tcl interface script and in the
udev configuration script.

Change-Id: Id2e1b5a5d0347c5d951a86a9cdb76be52cfd4ea3
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4702
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

2018-12-06 10:02:33 +00:00

..

ftdi

interface: adapter configuration for FTDI C232HM

2018-09-10 09:38:06 +01:00

altera-usb-blaster2.cfg

jtag/drivers: add USB-Blaster II

2014-01-20 13:28:02 +00:00

altera-usb-blaster.cfg

tcl: interface: usb blaster I: specify driver explicitly

2018-03-13 08:41:43 +00:00

arm-jtag-ew.cfg

Move TCL script files -- Step 2 of 2:

2009-05-27 06:49:24 +00:00

at91rm9200.cfg

Move TCL script files -- Step 2 of 2:

2009-05-27 06:49:24 +00:00

buspirate.cfg

Add SWD protocol support to buspirate (2nd try)

2018-03-12 14:14:36 +00:00

calao-usb-a9260.cfg

rename jtag_nsrst_delay as adapter_nsrst_delay

2010-03-15 08:41:30 -07:00

chameleon.cfg

Move TCL script files -- Step 2 of 2:

2009-05-27 06:49:24 +00:00

cmsis-dap.cfg

cmsis-dap: add serial number support

2014-10-16 12:30:50 +00:00

dummy.cfg

Move TCL script files -- Step 2 of 2:

2009-05-27 06:49:24 +00:00

estick.cfg

jtag: add opendous and estick support

2012-05-14 09:41:49 +00:00

flashlink.cfg

interface configs: Fix whitespace and other issues.

2011-10-30 02:06:07 +00:00

ft232r.cfg

jtag: drivers: add support for FT232R sync bitbang JTAG interfaces

2018-03-13 08:47:46 +00:00

imx-native.cfg

imx_gpio: add mmap based jtag interface for IMX processors

2017-05-31 08:16:17 +01:00

jlink.cfg

interface/jlink: Fix comment about serial number

2016-04-12 17:03:02 +01:00

jtag_vpi.cfg

jtag_vpi: make the server address configurable

2013-12-31 12:00:49 +00:00

kitprog.cfg

jtag/drivers: Add Cypress KitProg driver

2017-05-12 10:08:43 +01:00

nds32-aice.cfg

aice: add Andes AICE support

2013-06-05 19:27:23 +00:00

opendous.cfg

jtag: add opendous and estick support

2012-05-14 09:41:49 +00:00

openjtag.cfg

Added OpenJTAG Driver

2013-06-05 19:52:15 +00:00

osbdm.cfg

jtag_interface: .speed can be NULL when not needed

2013-02-08 22:33:19 +00:00

parport_dlc5.cfg

interface configs: Fix whitespace and other issues.

2011-10-30 02:06:07 +00:00

parport.cfg

tcl/interface/parport: default to sane value on non-windows systems

2015-04-14 11:42:32 +01:00

raspberrypi2-native.cfg

tcl: interface: harmonise RPi configs

2018-01-30 07:39:24 +00:00

raspberrypi-native.cfg

tcl: interface: harmonise RPi configs

2018-01-30 07:39:24 +00:00

rlink.cfg

Move TCL script files -- Step 2 of 2:

2009-05-27 06:49:24 +00:00

stlink-v1.cfg

jtag: drivers: stlink: handle all versions with single config

2017-12-12 21:13:55 +00:00

stlink-v2-1.cfg

jtag: drivers: stlink: handle all versions with single config

2017-12-12 21:13:55 +00:00

stlink-v2.cfg

jtag: drivers: stlink: handle all versions with single config

2017-12-12 21:13:55 +00:00

stlink.cfg

stlink: add usb pid for v2.1 without mass storage device

2018-12-06 10:02:33 +00:00

sysfsgpio-raspberrypi.cfg

tcl: interface: harmonise RPi configs

2018-01-30 07:39:24 +00:00

ti-icdi.cfg

jtag_interface: .speed can be NULL when not needed

2013-02-08 22:33:19 +00:00

ulink.cfg

interface configs: Add missing URLs and names.

2011-11-03 23:53:26 +00:00

usb-jtag.cfg

Remove support for the GPL incompatible FTDI D2XX library

2016-11-06 09:47:12 +00:00

usbprog.cfg

interface configs: Fix whitespace and other issues.

2011-10-30 02:06:07 +00:00

vsllink.cfg

versaloon driver update

2011-08-16 12:50:38 +01:00

xds110.cfg

jtag/drivers: Add support for TI XDS110 debug probe

2018-05-31 13:25:16 +01:00