Running the GDB command 'flash-erase' triggers sending the remote
GDB commands 'vFlashErase' (one per flash bank) followed by one
single 'vFlashDone', with no 'vFlashWrite' commands in between.
This causes the field 'gdb_connection->vflash_image' to be NULL
during the execution of 'vFlashDone', triggering a segmentation
fault in OpenOCD.
While parsing 'vFlashDone', check if any image to flash has been
received.
Change-Id: I443021c7a531255b60f2c44c2685e52e3c34b5c8
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8164
Tested-by: jenkins
After commit d9b2607ca0 ("gdb_server: support sparse register
maps"), GDB crashes while requesting the value of 'cpsr' because
the fake register is tagged as not existing.
Change the logic and set all register as existing, while still
limiting the list for the initial GDB request at connect.
Change-Id: I1c4e274c06147683db2a59a8920ae5ccd863e15c
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8163
Tested-by: jenkins
The command substantially complicates support of nRF53/91
series. It was not even properly ported to nRF52.
The informative value is disputable. Who wants to see
e.g. override trim values for radio or unique device ID?
Drop it and simplify the driver.
Change-Id: Ia7fb20ce2ebf16065705c5d18deaf934e58db426
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/8108
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
nrf5_get_probed_chip_if_halted() was somewhat bizarre
combination of functions:
- test if the target is halted is appropriate for flash
erase/write only, certainly not for getting chip info
- getting chip pointer takes place more frequently
and using one temporary variable for dereference
makes no harm
- probing chip is useless at all as the flash
infrastructure always calls auto_probe() before
entering a flash operation
Replace the function by ordinary and readable code.
Change-Id: Ic31f4e33d8b7b36687be3f40bfd0fe913d17b75f
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/8107
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
from Product Specification of nRF52805, 810, 811
820, 833 and 840.
While on it, rename the table to make sure the codes
are valid for nRF52 series only.
Change-Id: Id8f78fd214c5d345d1769378ae546a6be5a183ba
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/8105
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
After 'reset run' or 'reset halt' the loaded application
is expected to manipulate RAMON register to workaround
the known silicon errata.
Moreover, writing to RAMON register from 'reset-end' event
after 'reset run' may collide with application intentions.
Use the workaround in 'reset-init' event only to ensure
correct function of target algorithms.
Change-Id: I7d2d92e6805a05a83676edb46b3163ef39b9a7e4
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/8104
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Use the newer driver name 'nrf5' instead.
While on it set the unused parameters of flash bank
creation to zero.
While on it remove 2 empty comments.
Change-Id: I9cf0eadc5b696e6c8b7e6aec0ea3345967523e87
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/8103
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
On 2008-03-05, before git's age, commit 6d95014674 adds sending
an ACK ('+' char) at GDB connection, before receiving any GDB
remote command that requires to be ACK'ed.
Neither the text added in the commit message ("added ACK upon
connection (send +)") nor in the associated comment ("send ACK to
GDB for debug request") provide an exhaustive explanation for
sending this unsolicited ACK.
This code has never been touched since its introduction.
Analysis of GDB code doesn't show it's required, including old GDB
code.
Running gdbserver (from GDB package) and attaching it with "nc"
shows that gdbserver does not send any ACK to a new connection.
Same for lldb-server.
Drop it!
Change-Id: Id68c352ce44dd85a1ea3d67446e17e2a241ef058
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6768
Tested-by: jenkins
Reviewed-by: Jan Matyas <jan.matyas@codasip.com>
Reviewed-by: Anatoly P <anatoly.parshintsev@syntacore.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
When performing a command queue allocation larger than the default page
size of 1MiB any subsequent allocations will run into an integer under-
flow when checking for the remaining memory left in the current page.
Causing the function returning a pointer past the end of the buffer and
thus creating a buffer overflow.
This has been observed to cause some transfers to Efinix FPGAs to fail,
because another buffer can get corrupted in the process, causing its
respective free() to fail.
Change-Id: Ic5a0e1774e2dbd58f1a05127f14816c8251a7d9c
Signed-off-by: SydMontague <sydmontague@phoenix-staffel.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8126
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
The original documents from Jedec since JEP106BG, do not report
the entry for "21 NXP (Philips)", replaced by "c".
It's clearly a typo.
Keep the line from JEP106BF.01 for "NXP (Philips)".
Change-Id: I293173c4527c2eabebdc33a94cd23d3a557a4618
Signed-off-by: Antonio Borneo <antonio.borneo@st.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8132
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The OpenJTAG driver behaviour always forces a system reset on jtag_init.
The driver was incorrectly assuming that when execute_reset is called
with trst set to 1 - perform a software TAP reset, otherwise perform a
system reset when trst is 0.
The set_state call assumes the that OpenJTAG hardware will perform a
software TLR reset if the target state is TAP_RESET. This is not the
case: the published VHDL will simply find the shortest path to TLR and
not perform a fixed 5 cycle operation with TMS held high.
Fix the code to only perform system resets when srst is 1 in
execute_reset and to force a software TAP reset operation in set_state
when the target state is TAP_RESET.
Change-Id: I7e0f76f8491efefff1ccaeb4b1ae16e722d76df4
Signed-off-by: N S <nlshipp@yahoo.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8121
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Calculate exact size of response expected from OpenJTAG device so that
openjtag_buf_read_standard doesn't spend 5 retry cycles waiting for
data that isn't coming.
Change-Id: Icd010d1fa4453d6592a1f9aed93fb1f01e0a19da
Signed-off-by: N S <nlshipp@yahoo.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8101
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Commit ea2e26f7d5 ("jtag: rewrite jim_jtag_configure() as
COMMAND_HANDLER") breaks the option -event if it is the last of
the command line.
This can be tested, even without any device connected, through:
#> openocd -f board/ti_cc26x0_launchpad.cfg
wrong # args: should be "-event <event-name> <event-body>"
Fix the check on available arguments after -event.
Change-Id: Iec1522238f906d61a888a09a7685acd9ac6442a7
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reported-by: Lorenz Brun <lorenz@brun.one>
Fixes: ea2e26f7d5 ("jtag: rewrite jim_jtag_configure() as COMMAND_HANDLER")
Reviewed-on: https://review.openocd.org/c/openocd/+/8125
Tested-by: jenkins
Reviewed-by: Lorenz Brun <lorenz@brun.one>
LIBUSB_ERROR_INTERRUPTED can happen when (among other things) OpenOCD
process receives a signal like SIGHUP or SIGINT during a call to libusb.
Such situations are expected and should not be treated as an error - the
affected request should just be restarted.
Without this patch applied if a signal arrives during FTDI initialization
procedure we can easily end up (if JTAG speed is low) in situations like
https://review.openocd.org/c/openocd/+/4767. This happens because
fpsse_flush fails due to LIBUSB_ERROR_INTERRUPTED .
It should be noted that the current usage of mpsse_flush should be
revised since it seems that we don't always process error codes returned
by the function.
Change-Id: Ifa063ce828068f8d0371e1c2a864bb6174649848
Signed-off-by: Parshintsev Anatoly <anatoly.parshintsev@syntacore.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7769
Reviewed-by: Tim Newsome <tim@sifive.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
