This patch modifies as little code as possible in order to simplify the
review. Data types that are affected by these changes will be addresses
in following patches.
While at it, apply coding style fixes if these are not too extensive.
Change-Id: Idcbbbbbea2705512201eb326c3e6cef110dbc674
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8413
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
This patch modifies as little code as possible in order to simplify the
review. Data types that are affected by these changes will be addresses
in following patches.
While at it, apply coding style fixes if these are not too extensive.
Change-Id: Ie048b3d472f546fecb6733f17f9d0f17fda40187
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8404
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
This patch modifies as little code as possible in order to simplify the
review. Data types that are affected by these changes will be modified
in following patches.
Change-Id: I83921d70e017095d63547e0bc9fe61779191d9d0
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8403
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The script, originally written for Linux code, skips several tests
on files whose name's extension is not in Perl list
'(h|c|s|S|sh|dtsi|dts)$'.
This causes such tests to not be executed on OpenOCD TCL files and
on Makefile.am and configure.ac.
Modify the script to include the OpenOCD files in the list.
Change-Id: I17c96bf32ee40d9390e60996e176e4e927c00197
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8408
Reviewed-by: Marek Kraus <gamelaster@outlook.com>
Tested-by: jenkins
Adds initial support for the BL702 series of chips, BL702, BL704 and BL706.
No flash bank support yet.
File name bl702.tcl was chosen over bl70x.tcl, because Bouffalo Lab
uses bl702 to mark the whole series in many of their tools.
The ndmreset bit in the RISC-V Debug Module isn't implemented correctly,
so it doesn't trigger a system reset as it should.
To solve this problem, the software reset is implemented
in the reset-assert-pre hook, which uses best reset method I could find.
What is not reset is the GLB core, which handles GPIOs, pinmux, etc.
The reset mechanism has been extensively tested, and works correctly
for both "reset run" and "reset halt", which the latter
halts very early in the BootROM.
Change-Id: I5ced6eb3902d1b9d9c1bba56f817ec5dc3493cb0
Signed-off-by: Marek Kraus <gamelaster@outlook.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8407
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The jimtcl project supports pkg-config, use it for a simpler
configuration of compiler and linker flags and to enforce the minimum
required package version.
Since the jimtcl pkg-config file is not available on all systems, use
AC_CHECK_HEADER() as fallback.
Change-Id: I6fdcc818a8fdd205a126b0a46356434dbe890226
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8383
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Build returns a makeinfo warning:
openocd.texi:5201: warning: `.' or `,' must follow @xref, not f
Add a dummy ',' after '@xref{..}' to silent the warning.
Fixes: 44cfdef0a4 ("server/gdb: Restructure commands")
Change-Id: Ic0bff8fc9b54942ebb72762816686ea7c7881345
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8392
Tested-by: jenkins
Reviewed-by: zapb <dev@zapb.de>
Scan-build is unable to detect that 'target->dbg_msg_enabled' does
not change across the function cortex_m_fast_read_all_regs().
It incorrectly assumes that it can be false at the first check (so
'dcrdr' get not assigned) and it is true later on (when 'dcrdr'
get used).
This triggers a false positive:
src/target/cortex_m.c:338:12: warning:
3rd function call argument is an uninitialized value
[core.CallAndMessage]
retval = mem_ap_write_atomic_u32(armv7m->debug_ap, DCB_DCRDR, dcrdr);
Use a local variable for 'target->dbg_msg_enabled' so scan-build
can track it as not modified.
While there, change the type of 'target->dbg_msg_enabled' to
boolean as there is no reason to use uint32_t.
Change-Id: Icaf1a1b2dea8bc55108182ea440708ab76396cd7
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8391
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
STM32U59/U5Ax devices are similar to U57/U58x devices
with 2 flash banks up to 2 MB each
while at there update STM32U57x/U58x revisions
Change-Id: I7e5c1700acf8c9fda34f660c9274bfd8bcb1381b
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6875
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
As defined in `target/target.h`, `coreid` is the index of the target on
the TAP, so, if an SMP group includes targets from multiple TAPs, it can
not be used as the base for `threadid`.
Change-Id: Ied7cfa42197aaf4908ef6628c6436f28d4856ebe
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7957
Tested-by: jenkins
Reviewed-by: Mark Zhuang <mark.zhuang@spacemit.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Direct memory driver swd native configuration for am62a7, am62p and
J722S SoCs. All three share common memory map for the debug address
map, so there is a strong reuse. However, introduce board file
specific to the board to allow users to directly get started.
Change-Id: I5609925a2e9918fd4c91d9fd40fbee98de27fdbc
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8283
Tested-by: jenkins
Reviewed-by: Vaishnav M A <vaishnav@beagleboard.org>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
Use a command group 'tcl' with subcommands instead of individual
commands with 'tcl_' prefix.
The old commands are still available to ensure backwards compatibility,
but are marked as deprecated.
Change-Id: I1efd8a0e2c1403833f8cb656510a54d5ab0b2740
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8344
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Use a command group 'gdb' with subcommands instead of individual
commands with 'gdb_' prefix.
The old commands are still available to ensure backwards compatibility,
but are marked as deprecated.
Change-Id: I037dc58554e589d5710cf46924e0a00f863aa300
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8336
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Added FT4232HA varianet of FTDI's FT4232H which has a different bcd.
Also added default PID/VID for the FT4243HA to contrib/60-openocd.rules.
And added default PID/VIDs for FTDI's HP ICs to contrib/60-openocd.rules
as this wasn't done previously.
BugLink: https://sourceforge.net/p/openocd/tickets/410/
Change-Id: Ia84b566aa004332d3f7815a3d22ac37eee4f522a
Signed-off-by: Jonathan Forrest <jonyscathe@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8225
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
