SYS_FLEN would be called before a write on a descriptor to check its size.
Currently lseek would fail with -1 when given the stdout/stderr descriptor.
Changing to use fstat seems to be the standard way of handling this.
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
ARMv7-M defines a "lockup" state that's entered in certain double
fault sequences which can't be recovered from without external help.
OpenOCD has previously ignored this.
Issue a diagnostic saying the chip has locked up, and force exit
from this state by halting the core. It's not clear this is the
best way to handle lockup; but there should now be less confusion.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Add space missing after the invalid ACK value. On init, say
which AP is being used, and don't assume it's an AHP-AP.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
isspace() parameter must be an integer, else a 'char' gets
used as an array index (sigh).
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
More SVF fixes:
* Treat all content between parentheses as part of the same
parameter; don't (wrongly) treat whitespace as a delimiter.
* Use isspace() to catch that whitespace; it's not all single
spaces, newlines etc are also valid.
* When parsing bitstrings, strip leading whitespace too.
So for example, these are equivalent and should (now) be OK:
"TDI( 1234 )"
"TDI( 1 2 3 4 )"
"TDI(00 12 34 )"
"TDI(
00 12
34)"
[dbrownell@users.sourceforge.net: comment updates; trivial cleanup]
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
If the target and openocd are idling, the log should normally
be silent at level 3. (Given no verbose logging options.)
Signed-off-by: Edgar Grimberg <edgar.grimberg@zylin.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
See http://forum.sparkfun.com/viewtopic.php?p=90983#90983 for discussion;
basically, the SVF parser wrongly expects "TDI (123)" but the space is
optional and it should accept "TDI(123)" too.
In the same way, "TDI(123)TDO(456)" should work too.
Rather than update the command parsing, this just makes sure the expected
spaces are present.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
The breakpoint/watchpoint message was wrong for Feroceon and
Dragonite, which have only one working watchpoint unit.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Summarize most ARM11 and Cortex-A8 updates as "acting much more
like other ARMs", and mention code sharing.
Clarify a few other points, including support for "reset-assert"
on all ARMs except Cortex-M (which doesn't exactly need it).
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
This fixes a bug whereby GDB's breakpoints weren't activated.
The root cause is a confused interface to resume(). Fix by
almost ignoring the "handle breakpoints" parameter; it only
seems related to the case of skipping breakpoint-at-PC.
Update a few coments to clarify what's happening.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Doxygen: don't be needlessly verbose; alphabetically sort members
TODO: add random bits; clarify which manuals are referenced
ARM disassembler: mention a few opcodes that still aren't handled
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Highlight the needs to properly jumper development boards; to
make the OpenOCD configuration match the jumpering; and to have
a usable "reset-init" method when debugging early boot code.
Specific mention of the "ATX Mode" that seems useful on
many i.MX boards, forcing NAND boot.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Update the comments about DP registers and some of the bitfields.
Remove inappropriate (and unused) DP_ZERO declaration.
Add some (currently unused) #defines needed for SWD protocol support,
based on previous patches from Andreas Fritiofson and Simon Qian.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
If GDB halts unexpectedly, print reason: srst assert or power
out detected.
If polling fails, then things are a bit trickier. We do not
want to spam telnet or the log with polling failed messages.
Leave that case be w/a comment in a code for now.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Rather than issuing a halt and then stepi/resume, just
wait for target to halt.
Issue a sterner warning via gdb console that any gdb
register changes will be ignored in this case.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
The "cm3-ftest.cfg" can be used to verify that OpenOCD handles
certain faults correctly:
- Test #1: it ignores faults that it wasn't told to catch
- Test #2: if vector_catch is told to catch, it catches
The "fault.c" generates ASM code to trigger faults, while the
config script loads and runs pre-compiled code.
This covers most, but not all, of the vector_catch options.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Don't give the same names to both flash chips on two OMAP boards.
For OSK, enable DCC downloads (removing a warning).
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Report each region of same-size sectors separately, instead of
incorrectly reporting that every sector has the same size.
This is a longstanding bug on NOR flash chips with non-uniform
sector sizes. It was largely hidden by other bugs in flash
handling. When some of those were recently fixed, this one was
exposed as a regression on str710.
[oyvind.harboe@zylin.com: update the loop to behave on str7 ]
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
