Some MCUs (e.g. the STM32F3) directly expose the internal reset line to
an external pin. When this signal is driven by a push/pull line, it can
actually be inhibited by the external driver. This results in a setup
where the MCU cannot reset itself, for example, by a watchdog timeout or
a sysreset request. To fix this condition, support for open drain output
on the SRST line is required.
Note that because `reset_config srst_open_drain` is the default, all
users of this adapter will switch over to an open drain output unless
explicitly configured otherwise.
Signed-off-by: Alex Crawford <openocd@code.acrawford.com>
Change-Id: I89b39b03aa03f826ed3c45793412780448940bcc
Reviewed-on: https://review.openocd.org/c/openocd/+/6559
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
1. Use TCP_NODELAY, which makes things twice as fast.
2. Get rid of a bunch of unnecessary socket block/non-block calls, which
improves speed another 10% or so.
Change-Id: I415db5746d55374a14564b1973b81e3517f5cb67
Signed-off-by: Tim Newsome <tim@sifive.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6534
Tested-by: jenkins
Reviewed-by: Jan Matyas <matyas@codasip.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The jimtcl API Jim_GetCommand() sets an error message when the
command is not found and flag JIM_ERRMSG is set.
OpenOCD is checking if the command has already been registered,
thus 'command not found' is the desired case.
Pass flag JIM_NONE to prevent jimtcl from setting the error
message.
Change-Id: I3329c2f8722eda0cc9a5f9cbd888a37915b46107
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6562
Tested-by: jenkins
Commit dc7b32ea4a ("armv7m_trace: get rid of the old tpiu code")
is not handling correctly the old 'tpiu' command if it is run
during the config phase (before command 'init').
Move the call to the old event handler 'trace-config' in function
jim_arm_tpiu_swo_enable(), so it is correctly executed after
'init'.
Add the call to the old event handler 'trace-config' also during
jim_arm_tpiu_swo_disable(), to match the old behaviour.
Add more information while alerting that the event 'trace-config'
is deprecated.
Change-Id: If831d9159b4634c74e19c04099d041a6e2be3f2a
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Fixes: dc7b32ea4a ("armv7m_trace: get rid of the old tpiu code")
Reviewed-on: https://review.openocd.org/c/openocd/+/6561
Tested-by: jenkins
Reviewed-by: Karl Palsson <karlp@tweak.net.au>
The initial version of the table dap_part_nums contains only the
part number of the device and not the manufacturer ID.
This causes collisions between devices with same part number but
from different manufacturer.
The table has been extended to include the manufacturer JEDEC code
in commit 2f131d3c30 ("ARM ADIv5: CoreSight ROM decode part
number and designer id").
For two old/legacy table's entries reported without manufacturer
code it was defined a special ANY_ID manufacturer, meaning skip
the check for manufacturer!
The two legacy entries report the comment "from OMAP3 memmap", and
thanks to the associated string has been possible through Google
to identify a Master Report [1] about using OpenOCD with the OMAP3
in a BeagleBoard. The ROM table is printed with OpenOCD command
"dap info 1" at page 8 and reports the Peripheral ID required to
extract the manufacturer ID that, out of any surprise, belong to
Texas Instruments.
Set the two missing manufacturer ID to Texas Instruments JEDEC
code.
Remove the now redundant definition and use of ANY_ID.
While revisiting this old code, remove also the useless comment
"0x113: what?". It was introduced in commit ddade10d4a ("ARM
ADIv5: "dap info" gets more readable") and from the same dump in
[1] it's clearly another element in OMAP3. It is listed as entry
0x8 in the ROM table and there is no further info available.
OpenOCD will anyway list it as:
Designer is 0x017, Texas Instruments
Part is 0x113, Unrecognized
Another link https://elinux.org/BeagleBoardOpenOCD reports the
text "Part number 0x113: This is ????", which sounds familiar!
No public document from Texas Instruments reports what is this
device at address 0x54012000.
[1] Warren Clay Grant - University of Texas at Austin
"Implementation of an Open Source JTAG Debugging Development
Chain for the BeagleBoard ARM® Cortex A-8" - May 2012
Link: https://repositories.lib.utexas.edu/bitstream/handle/2152/ETD-UT-2012-05-5478/GRANT-MASTERS-REPORT.pdf
Change-Id: I7e007addbb5c6e90303e4e8c110c7d27810fbe9c
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6454
Tested-by: jenkins
Reviewed-by: Daniel Goehring <dgoehrin@os.amperecomputing.com>
The complete AP type should include 'class' and 'manufacturer'.
Cleanup the definition of AP type from AP_REG_IDR register.
Include the check of 'class', together with manufacturer and type.
Add the new MEM-AP from ARM IHI0074C.
Change-Id: Ic8db7c040108ba237b54f73b1abe24b8b853699b
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6447
Tested-by: jenkins
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-by: Daniel Goehring <dgoehrin@os.amperecomputing.com>
Several magic numbers related to ARM CoreSight specification
IHI0029E are spread around OpenOCD code.
Define through macros the ARM CoreSight magic numbers and collect
them in a single include file.
Use the new macros wherever possible.
Change-Id: I9b0c1c651ce4ffbaf08d31791ef16e95983ee4cb
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6446
Tested-by: jenkins
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-by: Daniel Goehring <dgoehrin@os.amperecomputing.com>
The include file 'armv7m.h' includes 'arm_adi_v5.h' only to get
the definition of 'struct adiv5_ap', but doesn't need the struct
content.
Reducing the cross dependencies speeds-up the compile time during
code development by avoiding re-compiling file.
Relax the dependency by locally declaring 'struct adiv5_ap' in
'armv7m.h' and remove the include of 'arm_adi_v5.h'.
Fix the other files that have now lost the includes file that
'arm_adi_v5.h' depends from.
Change-Id: Ic0d40b17db6045fa43f348bda83eaf211a6b347d
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6468
Tested-by: jenkins
Reviewed-by: Daniel Goehring <dgoehrin@os.amperecomputing.com>
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
This partially reverts commit 1247eee4e6.
There is no reasonable use cases where work-area should be enabled
and working, and it can't be used for the flash loader.
Instead of introducing driver specific property, users can disable
flash load by disabling work-area, for example by setting it to 0.
But still we keep the function stm32l4_write_block_without_loader
to be used when workarea is not available (no sufficient size or zero)
Change-Id: Ibb046c74df354c6067bac978e8ef7efb47d9fd2b
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6569
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
the echo command is managed through command handler and not jim_handler
to be consistent rename the handler from jim_echo to handle_echo
and update the return values
Fixes: 4747af362d (JIM: document "echo" command)
Change-Id: I5ae87ea802d8430b573fb83daa6b35490b5d5775
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6549
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
We are already at the limit for the number of VID/PID pairs declared
in stlink.cfg and stlink-dap.cfg. Increase the maximum number of pairs
from 8 to 16 to make room for a few more devices.
Signed-off-by: Andreas Sandberg <andreas@sandberg.uk>
Change-Id: Ifad8e7ef67b930edbb5421730f00eb3390812f06
Reviewed-on: https://review.openocd.org/c/openocd/+/6554
Tested-by: jenkins
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The NULL pointers preceded by cast where not detected by the
scripting tools looking for NULL pointer comparison.
Remove them and, while there, further simplify the code and apply
the other coding style rules.
Change-Id: Ia7406122e07ef56ef311579ab0ee7ddb22c8e4b5
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6539
Tested-by: jenkins
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
