In 2008 the commit 1829361253 ("define resetting
the target into the halted or running state as an atomic operation.")
introduced the target_halt() call to the end of cortex_m3_assert_reset(),
Checkpatch-ignore: GIT_COMMIT_ID
A year later the commit ed36a8d15d
("... Updated halt handling for cortex_m3")
prevented cortex_m3_halt() take any action in case of TARGET_RESET state.
This narrowed the target_halt() called from cortex_m3_assert_reset()
to setting target->halt_issued and storing a time stamp.
Introducing ocd_process_reset(_inner) made the setting of halt_issued
and halt_issued_time useless. The Tcl function waits for halt
of all targets if applicable.
cortex_m_halt() and also target_halt() does not work as expected
if the cached target state is TARGET_RESET (although the core could
be out of reset and ready to be halted, just have not been polled).
Explicit Tcl arp_poll must be issued in many scenarios.
Remove the useless hack.
Also remove the explicit error return from cortex_m_halt_one()
in case of RESET_SRST_PULLS_TRST and asserted srst. If the communication
with the target is gated by any reset, cortex_m_write_debug_halt_mask()
fails. Propagate the error return of this call instead.
Change-Id: I0da05b87f43c3d0facb78e54d8f00c1728fe7c46
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/8098
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
In a corner case when debug_ap is not available,
cortex_m_assert_reset() asserts reset to restore
communication with the target.
Prevent to do so on targets with defer_examine,
as such targets need some special handling to enable them
after reset anyway.
The change makes possible to handle a multicore Cortex-M SoC with
an auxiliary Cortex-M core(s) switched of by default
even with 'reset_config srst_gates_jtag'
Change-Id: I8cec7a816423e588d5e2e4f7904c81c776eddc42
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/8097
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Previously, the gpio_num and chip_num members of adapter_gpio_config
were typed as 'int' and a sentinel value of -1 was used to denote
unconfigured values.
Now, these members are typed as 'unsigned int' to better reflect their
expected value range.
The sentinel value now maps to UINT_MAX as all adapters either define an
upper bound for these members or, in the case of bcm2835gpio, only
operate on a specific chip, in which case the value doesn't matter.
Format specifiers have been left as %d since, when configured, valid
values are within the positive range of 'int'. This allows unconfigured
values to display as a more readable value of -1 instead of UINT_MAX.
Change-Id: Ieb20e5327b2e2e443a8e43d8689cb29538a5c9c1
Signed-off-by: Vincent Fazio <vfazio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8124
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Jlink driver floods the debug log by a message per one poll interval.
Avoid annoying messages, change their logging level to LOG_DEBUG_IO
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Change-Id: I84ea6aa9cdfd44b5985c5393519d1efb7de9530a
Reviewed-on: https://review.openocd.org/c/openocd/+/8116
Reviewed-by: zapb <dev@zapb.de>
Tested-by: jenkins
The target esirisc does not free the allocated memory resources,
causing memory leaks at OpenOCD exit.
Add esirisc_free_reg_cache() and esirisc_deinit_target() and use
them to free all the allocated resources.
Change-Id: I17b8ebff54906fa25a37f2d96c01d010a98cffbd
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8094
Tested-by: jenkins
Reviewed-by: Steven Stallion <sstallion@gmail.com>
The function in question does not need to change target state. It is a
target-type-dependant function, however, IMHO, it is safe to assume that
any target type would not need to change type-independant state of a
target to figure out the arch.
Change-Id: I607cb3aee6529cd5a97bc1200a0226cf6ef43caf
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8093
Tested-by: jenkins
Reviewed-by: Jan Matyas <jan.matyas@codasip.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
There are quite a lot of "getters" in target interface.
They do not change target structure, nevertheless the structure is
passed to these functions via a plain pointer.
The intention is to clarify the purpouse of these functions by passing
the `target` structure as a pointer to constant data.
Change-Id: Ida4a798da94938753b86a293a308d93b091d1bf3
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8092
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
- Example for configuring multiple non-SMP
Xtensa cores e.g. for heterogeneous debug
- JTAG only at this time; DAP out of scope
- Dual-Xtensa Palladium example via VDebug
- Update Xtensa core config examples
Signed-off-by: Ian Thompson <ianst@cadence.com>
Change-Id: I6d2b3d13fa8075416dcd383cf256a3e8582ee1c1
Reviewed-on: https://review.openocd.org/c/openocd/+/8078
Tested-by: jenkins
Reviewed-by: Jacek Wuwer <jacekmw8@gmail.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
This change implements the support for the ARM Debug Interface v6.
The DAP-level interface properly selects the DP Banks and AP address.
Sample ARM configuration DAP and JTAG scripts have been updated.
Change-Id: I7df87ef764bca587697c778810443649a7f46c2b
Signed-off-by: Jacek Wuwer <jacekmw8@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8067
Tested-by: jenkins
Reviewed-by: Ian Thompson <ianst@cadence.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
This file is intended to be included in any user's project that
plans to use OpenOCD awareness for uCOS-III.
It is supposed to be distributed under a license compatible with
the uCOS-III code, that is Apache-2.0 license.
Distribute it under Apache License 2.0.
Change-Id: I51ecd469c8ccdd23a069d21e89b7d90886691395
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7996
Tested-by: jenkins
Add the full text of the Apache-2.0 license to the OpenOCD tree.
It has the same content from:
https://spdx.org/licenses/Apache-2.0.html#licenseText
but reformatted as in the Linux kernel document and added the
required tags for reference and tooling.
While this commit is specific for standalone files, it already
reports the information for dual licensing.
Change-Id: I1fd427256c310ab733fb5d50f344ac52c64a56f5
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8005
Tested-by: jenkins
Reviewed-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Correct GPIO Extender configuration, after reconsideration,
we need to configure the IO extender 0x23 pins as all inputs.
Add more LOG_ERRORs to the code to better track bugs.
Re-organize angie_init function
Change-Id: I1fcf4919ba9ea95576803dd35cce7dafa26853b4
Signed-off-by: Ahmed BOUDJELIDA <aboudjelida@nanoxplore.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8079
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Clang static analyzer warnings
"1st function call argument is an uninitialized value"
on the first libusb_free_transfer() parameter (lines 423, 424)
could turn into a real problem in a corner case:
If allocation of a libusb transfer struct fails, the pointers of not yet
allocated transfers remain uninitialized.
Use calloc() to zero whole struct cmsis_dap_backend_data.
Fixes: fd75e9e542 (jtag/drivers/cmsis_dap_bulk: use asynchronous libusb transfer)
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Change-Id: I0e489757d82d10ed7416c5e8c215e1facc7f8093
Reviewed-on: https://review.openocd.org/c/openocd/+/8045
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The function is used for commands:
- jtag configure
- jtag cget
While there, add the missing .usage field.
Change-Id: I97ddc4898259ddb7fd2d057a997f33a6f4b0e2a8
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8058
Tested-by: jenkins
Before this change, when we send an I2C Bulk data at the same
time while Jtag bitbanging functions execute, the microcontroller
puts JTAG bitbanging on wait and executes all I2C bitbanging
function, which causes problems like loss of Ack in DAP responses
and other errors.
With this commit, When I2C interruption occurs, it sets a variable
to true and continues JTAG bitbanging, when it finish it executes
the I2C bitbang.
Change-Id: Ia80bac21f8a259f4a1176b5346bf74ed0aa6e38b
Signed-off-by: Ahmed BOUDJELIDA <aboudjelida@nanoxplore.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8074
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Add GPIO extender initial configuration that is needed to configure
some important GPIOs and ensure that the dev board is ready to work.
Add i2c_write function that make a write transfer to any slave device.
Give a new Product ID to ANGIE to make it different than the non
programmed ANGIE.
Change-Id: I0a8dacb7fe218145b7d3ed1cb75f106ed6256714
Signed-off-by: Ahmed BOUDJELIDA <aboudjelida@nanoxplore.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8072
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
remove angie_clear_queue function from executing before the
angie_execute_queued_commands function and making it at the
end of the reset function.
Change-Id: Id8a0664fbd5b8f9730545ce0f8f272ae0b0e7e78
Signed-off-by: Ahmed BOUDJELIDA <aboudjelida@nanoxplore.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7990
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
We want to keep the tri-state buffers located between the FPGA
and the board, in 'Z' state until we launch an i2c connection.
We launch an i2c start condition, make the SCL
direction 'OUT' to start the i2c protocol and at the end
of the i2c connection at the stop condition, we re-make
the tri-state buffers at 'Z' state.
Change-Id: Ic597a70d0427832547f6b539864c24ce20a18c64
Signed-off-by: Ahmed BOUDJELIDA <aboudjelida@nanoxplore.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7989
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Send bitstream size to firmware to initialize the GPIF count registers,
since we're going to send this size via GPIF, we need to give the exact
number of bytes to be sent, then the GPIF counter will decrement with
every clock cycle (every byte sent) until reaching zero and stops.
Change-Id: Ib4e8e0f95a6a4a95ef4888ba8a04a0ea45567f5a
Signed-off-by: Ahmed BOUDJELIDA <aboudjelida@nanoxplore.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7988
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Change the GPIF state machine, configuring only one of the 4 waveforms
to generate the clock signal (CCLK) used to program the FPGA, and send
one byte every cycle using an 8-bit bus.
Change-Id: I43cf5480b9d5c40cc2f6a62a52ecfe078b76458e
Signed-off-by: Ahmed BOUDJELIDA <aboudjelida@nanoxplore.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7976
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
clang build triggers an error for an uninitialized value of the
variable 'instr'.
This is a false positive, as the macro
#define MIPS32_CONFIG3_ISA_MASK (3 << MIPS32_CONFIG3_ISA_SHIFT)
guarantees the switch/case already covers all the possible values
with cases 0, 1, 2 and 3.
Silent clang by adding a useless default case to the switch.
While there, fix the indentation of the switch/case accordingly to
OpenOCD coding style.
Change-Id: I0ae316754ce7d091dd8366bf314b8e6ee780e313
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Fixes: 7de4b1202d ("target/mips32: add cpu info detection")
Reviewed-on: https://review.openocd.org/c/openocd/+/8065
Tested-by: jenkins
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
