Use the TRAX interface DEBUGPC if available.
Otherwise use default stop-and-go profiling.
ESP32-S3, before this patch:
Internal: 8 samples/second
FT2232H: 12 samples/second
After this patch:
Internal: 18ksamples/second
FT2232H: 100ksamples/second
Change-Id: I681f0bccf4263c1e24f38be511e3b3aec8bf4d60
Signed-off-by: Richard Allen <rsaxvc@rsaxvc.net>
Reviewed-on: https://review.openocd.org/c/openocd/+/8431
Reviewed-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Ian Thompson <ianst@cadence.com>
Reviewed-by: Yurii Shutkin <yurii.shutkin@gmail.com>
This updates the flash driver to support more than one bank.
This is required to support the cc1352p7 which has two banks.
This only have been tested on a cc1352p7.
The loader has been built using a gcc-arm-none-eabi-4_8-2014q3
toolchain.
Change-Id: Ia813421ececd96d6e2fd4dae910ad60fcc3d3c88
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8192
Tested-by: jenkins
Reviewed-by: Vaishnav M A <vaishnav@beagleboard.org>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Flash banks created in kinetis_create_missing_banks did not populate
bank->minimal_write_gap. The default value of 0 was interpreted as
FLASH_WRITE_CONTINUOUS. This created unnecessary large padding if your
binary had a gap in the populated flash. It also caused flash errors
when loading with GDB because the erroneously padded pages were not
erased first. Tested using an S32k148 using s32k.cfg.
Change-Id: I9b7af698e29ac2c4f5fc8ecd82fa7f4b1a0d43f1
Signed-off-by: daniellizewski <daniellizewski@geotab.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8463
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Looks like 7f2d3e2925 introduced a regression by incorrectly assigning
threads. The title of the commit message says that the intention was to
"derive threadid from SMP index", this is not what happens, however.
Instead threadid is assigned based on an index of all examined targets
in an SMP group.
This introduces two logical errors.
*Error 1*
Here is the code that assigns threads to harts:
```
foreach_smp_target(head, target->smp_targets) {
struct target *curr = head->target;
if (!target_was_examined(curr))
continue;
threadid_t tid = threads_found + 1;
hwthread_fill_thread(rtos, curr, threads_found, tid);
```
Now, imagine a situation when we have two targets: `target.A` and
`target.B`. Let's assume that `target.A` is NOT examined (it could be
under reset, for example). Then, according to the algorithm when
assigning thread identifiers `target.B` will be assigned tid of 1. The
respected inferior on GDB side will be called `Thread 1`.
Now, imagine that `target.A` activates and succefully examined - OpenOCD
will re-assign thread identifiers. And now on GDB side `Thread 1` will
represent the state of `target.A`. Which is incorrect.
*Error 2*
The reverse mapping between `threadid` and targets does not take the
state of targets into account.
```
static struct target *
hwthread_find_thread(struct target *target, threadid_t thread_id)
...
threadid_t tid = 1;
foreach_smp_target(head, target->smp_targets) {
if (thread_id == tid)
head->target;
++tid;
}
```
So the constructed mapping is incorrect. Since in example above
`Thread 1` will get mapped to `target.A`.
*Solution:*
It seems that threadids should be assigned based on position of the
thread in an smp group disregarding the target state.
Change-Id: Ib93b7ed3bb03696afdf56a105b333e22b9ec69b5
Signed-off-by: Parshintsev Anatoly <anatoly.parshintsev@syntacore.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8471
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Mark Zhuang <mark.zhuang@spacemit.com>
Tested-by: jenkins
Reviewed-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
The _targets has to be global as it is accessed at the end of this file.
This is already the case for setup_a5x {}, assure it is the same way for
setup_crx{} . Without this change, the _targets at the end of this file
is empty in case the Cortex-R is the boot core, fix this.
Change-Id: I4979e3125ec7d93bbd56eee0096ae1d9c5f6a565
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8470
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
virtex2 refresh replaced virtex2 program, but the even older programming
commands like xc6s_program still suggest the old, now-removed program
command. This changes the warnings to suggest the command that is still
there, and also adds some indication that you will need to use the .pld
name instead of the .tap name.
Change-Id: I292da62a95a9b414c69cdb1bba8a28dfd16a7336
Signed-off-by: Adam Novak <interfect@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8468
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Daniel Anselmi <danselmi@gmx.ch>
If no mask is given, the value in the option register is replaced
completely. If a mask is set, only those bits that are set in the mask
are transferred into the option register; the others remain unchanged.
Change-Id: If488a10f92d7dcc0e0f192aef5e67c255fd529c3
Signed-off-by: Ondřej Hošek <ondra.hosek@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8466
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
stm32l4x option_write works like stm32h7x option_write, i.e. expects the
value to write after reg_offset and optionally reg_mask after the value.
Change-Id: I57fb4fb1dbf7f43fe063b48f4db2dd5f2ef0ade0
Signed-off-by: Ondřej Hošek <ondra.hosek@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8464
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Integer values are interpreted by TCL as decimal, binary, octal
or hexadecimal if prepended with '0d', '0b', '0o' or '0x'
respectively.
The case of '0' prefix has been interpreted as octal till TCL 8.6
but is interpreted as part of a decimal number by JimTCL and from
TCL 9.
Align str_to_buf() to latest TCL syntax by:
- addding support for '0d', '0b' and '0o' prefix;
- dropping support for '0' prefix.
Change-Id: I708ef72146d75b7bf429df329a0269cf48700a44
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8465
Tested-by: jenkins
Reviewed-by: Jan Matyas <jan.matyas@codasip.com>
Open output file in binary mode to disable EOL
conversion on Windows (and sometimes cygwin depending
on installation settings and path).
Change-Id: I38276dd1af011ce5781b0264b7cbb08c32a1a2ad
Signed-off-by: Richard Allen <rsaxvc@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8278
Reviewed-by: Karl Palsson <karlp@tweak.au>
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
