Commit Graph

4687 Commits

Author SHA1 Message Date
Michael Schwingen
1795239cfd actux3.cfg: add function to setup for u-boot debugging
Signed-off-by: Michael Schwingen <michael@schwingen.org>
2011-01-02 21:17:57 +01:00
Michael Schwingen
09a0a69c09 cfi_protect is not implemented on Spansion flashes (many do not even have protection bits). Demote from error to warning, so that common board code can use "flash write_image erase unlock" regardless of the flash type.
Signed-off-by: Michael Schwingen <michael@schwingen.org>
2011-01-02 21:15:27 +01:00
Michael Schwingen
d8ece229f9 non-CFI flash code uses data from CFI structures. Make sure that timeouts are filled in on non-CFI flashes, and print CFI information in all cases, nut just on CFI flashes.
Signed-off-by: Michael Schwingen <michael@schwingen.org>
2011-01-02 21:15:08 +01:00
Jon Povey
d356034f03 svf: implement sleep for RUNTEST min_time
Signed-off-by: Jon Povey <jon.povey@racelogic.co.uk>

min_time was effectively ignored, I needed it to program a Lattice MachXO
which uses a RUNTEST to wait for an erase operation, amongst other things.

With this patch pauses happen and I can program the device with an SVF
generated in LSC ispVM (with "Rev D Standard" checked to suppress
nonstandard LOOP statements)
2011-01-02 20:02:16 +01:00
Jon Povey
18a5a46bd9 svf: fix USAGE and related error reporting
Signed-off-by: Jon Povey <jon.povey@racelogic.co.uk>
2011-01-02 20:01:20 +01:00
Antonio Borneo
093ec6656a NAND/S3CXXXX: remove private "target" copy
Remove "target" form private data, and use
common one in struct nand_block.

Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2011-01-02 19:58:58 +01:00
Antonio Borneo
f49283a062 NAND/ORION: remove private "target" copy
Remove "target" form private data, and use
common one in struct nand_block.

Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2011-01-02 19:58:40 +01:00
Antonio Borneo
5e27647e22 NAND/NUC910: remove private "target" copy
Remove "target" form private data, and use
common one in struct nand_block.

Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2011-01-02 19:58:26 +01:00
Antonio Borneo
457556b146 NAND/MX3: remove private "target" copy
Remove "target" form private data, and use
common one in struct nand_block.

Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2011-01-02 19:58:19 +01:00
Antonio Borneo
b7b9ad755e NAND/MX2: remove private "target" copy
Remove "target" form private data, and use
common one in struct nand_block.

Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2011-01-02 19:57:58 +01:00
Antonio Borneo
35c30e9ee7 NAND/LPC3180: remove private "target" copy
Remove "target" form private data, and use
common one in struct nand_block.

Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2011-01-02 19:57:45 +01:00
Antonio Borneo
3db34f8447 NAND/DAVINCI: remove private "target" copy
Remove "target" form private data, and use
common one in struct nand_block.

Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2011-01-02 19:57:30 +01:00
Antonio Borneo
2e1f2b50fd NAND/AT91SAM9: remove private "target" copy
Remove "target" form private data, and use
common one in struct nand_block.

Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2011-01-02 19:57:15 +01:00
Antonio Borneo
5f3603b8ef NAND/TCL: prepare for common "target" reference
Every NAND driver keeps private copy of "target"
structure.
Prepare infostructure to move private "target"
copy in common/shared struct nand_device.

Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2011-01-02 19:56:59 +01:00
Antonio Borneo
21a1c6ec33 NAND/TCL: fix segfault on syntax error
Fix segfault if incomplete command "nand device dummy"
is executed.

Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2011-01-02 19:54:20 +01:00
Antonio Borneo
7bb79f0f51 NAND/CORE: Comment use of alive_sleep()
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2011-01-02 19:53:55 +01:00
Antonio Borneo
52044a17ce NAND/CORE: Replace decimal dot in messages
Table of NAND devices reports operating voltage.
Replace comma with proper decimal dot.

Øyvind: "." is correct for UK/US, but incorrect for
many other languages. OpenOCD is not localized at this
point, so sticking to "." for US/UK should be OK.

Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2011-01-02 19:52:53 +01:00
Antonio Borneo
b0759dfc53 flash/nand: review NAND driver interface
From struct nand_flash_controller :
- remove unused field register_commands;
- remove field controller_ready, exported but
  never referenced.
Remove dead code pointed by controller_ready.

Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2011-01-02 19:49:36 +01:00
Marek Vasut
0136977c40 CORTEX A8: Fix broken CPU identification
This patch fixes the issue where the OMAP CPU (and possibly others) was mistaken
for iMX51 and therefore had misadjusted debug base.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-12-30 08:19:47 +01:00
Andrew MacIsaac
50e79d60ce Compilation Warnings on OS X 10.5
I received a number of "-Wshadow" related warnings (treated as errors) while
trying to build on OS X Leopard.  In addition, there were two miscellaneous
other warnings in the flash drivers.  Attached are two patches which correct
these issues and the commit messages to accompany them.

My system has the following configuration (taken from uname -a):

Darwin 9.8.0 Darwin Kernel Version 9.8.0: Wed Jul 15 16:55:01 PDT 2009;
root:xnu-1228.15.4~1/RELEASE_I386 i386

=== Werror_patch.txt Commit Message ===
compilation: fixes for -Wshadow warnings on OS X

These changes fix -Wshadow compilation warnings on OS X 10.5.8

Compiled with the following configure command:

../configure --prefix=/usr/local --enable-maintainer-mode --enable-jlink
--enable-ft2232_libftdi

=== flash_patch.txt Commit Message ===
compilation: fixes for flash driver warnings on OS X

These changes fix two compilation warnings on OS X 10.5.8:

../../../../src/flash/nor/at91sam3.c:2767: warning: redundant redeclaration
of 'at91sam3_flash'
../../../../src/flash/nor/at91sam3.c:101: warning: previous declaration of
'at91sam3_flash' was here

and

../../../../src/flash/nor/stmsmi.c:205: warning: format not a string literal
and no format arguments

Compiled with the following configure command:

../configure --prefix=/usr/local --enable-maintainer-mode --enable-jlink
--enable-ft2232_libftdi
===

Andrew
2010-12-29 22:16:28 +01:00
Øyvind Harboe
eea91f71f9 warning: fix warning where GCC didn't catch a doubly declared global structure
Why hasn't earlier versions of GCC caught this? Bug?

Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-12-29 22:14:43 +01:00
Øyvind Harboe
4f9a9b8eba warnings: use more 'const' for char *
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-12-29 22:07:39 +01:00
Øyvind Harboe
8f93c0a3fe target: do not expose error numbers to users
error numbers are only reported at DEBUG log levels and
used internally, they are not part of the user interface.

Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-12-29 20:59:30 +01:00
David Brownell
7cd2617384 initial SWD transport (SWD infrastructure #2)
This piggy backs on JTAG so it's not yet pretty, but that
seems unavoidable so far given today's OpenOCD internals.

SWD init and data transfer  are unfinished and untested, but
that should cause no regressions, and will be addressed by
the time drivers start using this infrastructure.  Checking
in whould get the code working better sooner, and turn up any
structural/architectural issues while they're easier to fix.

The debug adapter drivers will provide simple SWD driver
structs with methods that kick in as needed (instead of JTAG).
So far just one adapter driver has been updated (not yet
ready to use or circulate).

The biggest issues are probably
  - fault handling, where the ARM Debug Interface V5 pipelining
    needs work in both JTAG and SWD modes and
  - missing  rewrite of block I/O code to work on both of our
Cortex-ready transports (Current code is  hard-wired to JTAG);
relates also to the pipelining issue.
  - omitted support to activate/deactivate SWO/SWV trace (this is
    technically trivial, but configuring what to trace is NOT.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
----

 doc/openocd.texi        |   17 ++
 src/jtag/core.c         |    3
 src/jtag/interface.h    |    4
 src/jtag/jtag.h         |    2
 src/jtag/swd.h          |  114 +++++++++++++++++++
 src/jtag/tcl.c          |    2
 src/target/adi_v5_swd.c |  281 ++++++++++++++++++++++++++++++++++++++++++++++--
 src/target/arm_adi_v5.c |    8 +
 src/target/arm_adi_v5.h |    3
 9 files changed, 425 insertions(+), 9 deletions(-)
2010-12-24 18:50:41 -08:00
Spencer Oliver
4994c60083 stm32x : always use valid flash base address
This change matches the previous behaviour of using the known
flash address.

Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-12-23 13:10:15 +00:00