More instructions decoded:
A5.3.5 Load/store multiple
The preferred PUSH/POP syntax is shown when appropriate.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2539 b42882b7-edfa-0310-969c-e2dbd0fdcd60
More instructions decoded:
A5.3.14 Multiply, and multiply accumulate
A5.3.15 Long multiply, long multiply accumulate, divide
The EABI requires *adjacent* register pairs, but the long multiply
ops can use any pair of registers; interesting.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2538 b42882b7-edfa-0310-969c-e2dbd0fdcd60
More Thumb2 32-bit opcode support:
A5.3.10 Store single data item
Byte, word, halfword. Offset, pre-index, post-index. And
a "make like you're unprivileged" option when using small
immediate offsets.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2537 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Print old-style Thumb NOP instructions as such. (GCC uses "mov r8, r8"
instead of the architected NOP which is new in Thumb2.)
git-svn-id: svn://svn.berlios.de/openocd/trunk@2536 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Make disassembly of the Thumb load-literal instruction show the
address of the literal being loaded (so users can avoid doing
that math themselves). Add and use an Align(PC,4) utility.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2535 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Make the Thumb2 disassembler handle more 32-bit instructions:
A5.3.3 Data processing (plain binary immediate)
These use mostly twelve bit literals, but there are also bitfield
and saturated add primitives.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2534 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Make the Thumb2 disassembler handle more 32-bit instructions:
A5.3.1 Data processing (modified immediate)
My small sample shows GCC likes to use many of these instructions.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2533 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Make the Thumb2 disassembler handle a bunch of 32-bit instructions:
A5.3.4 Branches and miscellaneous control
Note that this shifts some responsabililty out of helper functions,
making the code and layout simpler for 32-bit decoders: they only
need to know how to format the instruction and its parameters.
Also, technical note: with this patch, Thumb1 decoders could now
call the Thumb2 decoder if they wanted to get nicer treatment of
the exiting 32-bit B/BLX instructions.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2532 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Change layout of Thumb disassembly to work better with Thumb2:
- Move opcode to the left, allowing space for four hex bytes:
* after address, two spaces not one tab (taking 6 spaces)
* after 2-byte opcode, four spaces before tab
- Also, after opcode mnemonic use a tab not a space, to make
operands line up
Sample output (after some patches decoding a few 32-bit instructions):
0x00003e5a 0xf4423200 ORR r2, r2, #131072 ; 0x20000
0x00003e5e 0x601a STR r2, [r3, #0x0]
0x00003e60 0x2800 CMP r0, #0x00
0x00003e62 0xd1f3 BNE 0x00003e4c
0x00003e64 0xf008fa38 BL 0x0000c2d8
The affected lines of code now wrap at sane margins too.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2531 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Initial support for disassembling Thumb2 code. This works only for
Cortex-M3 cores so far. Eventually other cores will also need Thumb2
support ... but they don't yet support any kind of disassembly.
- Update the 16-bit Thumb decoder:
* Understand CPS, REV*, SETEND, {U,S}XT{B,H} opcodes added
by ARMv6. (It already seems to treat CPY as MOV.)
* Understand CB, CBNZ, WFI, IT, and other opcodes added by
in Thumb2.
- A new Thumb2 instruction decode routine is provided.
* This has a different signature: pass the target, not the
instruction, so it can fetch a second halfword when needed.
The instruction size is likewise returned to the caller.
* 32-bit instructions are recognized but not yet decoded.
- Start using the current "UAL" syntax in some cases. "SWI" is
renamed as "SVC"; "LDMIA" as "LDM"; "STMIA" as "STM".
- Define a new "cortex_m3 disassemble addr count" command to give
access to this disassembly.
Sanity checked against "objdump -d" output; a bunch of the new
instructions checked out fine.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2530 b42882b7-edfa-0310-969c-e2dbd0fdcd60
1) Only archive NEWS file on major and minor relesae, not bug-fixes.
2) Switch back to correct development branch during final release step.
3) Add do_svn_switch helper to ensure package variables are reloaded.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2516 b42882b7-edfa-0310-969c-e2dbd0fdcd60
giving --disable-parport-ppdev to configure on some platform(s).
git-svn-id: svn://svn.berlios.de/openocd/trunk@2514 b42882b7-edfa-0310-969c-e2dbd0fdcd60
