Squash the history to reduce all the noise when rebasing.
Readme correction
Changes to support QUTS-openOCD
Changes to support QUTS-openOCD
Hexagon debug changes
License headers addition
config file update for lanai
Jimtcl submodule version correction
QUTS install instructions
Eud QPM version update in readme
EUD QPM name correction
Removed QUTS library code for EUD Service
Updated hexagon support
Added EUD submodule
Updated makefiles to compile EUD codebase with openocd
Use --enable-eud with configure command to compile with EUD
Added Qualcomm QCS6490 configuration file
Removed QUTS library code for EUD Service
Updated hexagon support
Added EUD submodule
Updated makefiles to compile EUD codebase with openocd if --enable-eud option is added with configure command
Added Qualcomm QCS6490 configuration file
Changes to read and print EUD Revision information
Signed-off-by: Ashi Gupta <quic_ashig@quicinc.com>
Added EUD Adapter option in qcs6490.cfg and updated license information
Signed-off-by: Ashi Gupta <quic_ashig@quicinc.com>
Updated the EUD submodule link and removed the newline character (\) from the target create command in the qcs6490.cfg configuration file
Signed-off-by: Ashi Gupta <quic_ashig@quicinc.com>
Add SWD multidrop setting.
Fix the name of AP #1 to AUX-AP
Set AUX-AP CSW Prot bit[0] to make RISC-V debug accessible on AUX-AP.
Change-Id: I496e07acfe90dd858e4403176a8330d8c1a0b560
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/8752
Tested-by: jenkins
Reviewed-by: zapb <dev@zapb.de>
The helper function 'target_name()' or, better, the log functions
'LOG_TARGET_xxx(target, ...)' should be used in place of taking
the target name directly from 'target->cmd_name'.
Replace the remaining instances in the code.
While there:
- address some indentation,
- drop trailing punctuation in log message,
- replace one LOG WARNING with LOG_TARGET_WARNING.
Change-Id: Ie6cf4c174ffe91b975c983e4697c735766267041
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8806
Tested-by: jenkins
Reviewed-by: zapb <dev@zapb.de>
During 'help' dump, to determine the mode (e.g. COMMAND_CONFIG) of
a command, the current code executes the OpenOCD TCL command
"command mode", while it could directly call the implementation of
the TCL command above.
Factorize jim_command_mode() and call the inner implementation
instead of executing "command mode".
Change-Id: Id8c33d0ed1373b5744dcc3ac354c3e0a88576f75
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8585
Reviewed-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
Tested-by: jenkins
While there:
- drop the command name from the error messages;
- check the returned value from Jim_GetWide() to detect incorrect
numeric values.
Change-Id: I399402ac11b6d459f1771e59e44210aef3e2a637
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8582
Tested-by: jenkins
Reviewed-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
The error message should not report the command name as it
should be already clear from the context.
Change-Id: I219e31be808bf6ff1924ce60f3025fb48ed7b125
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8803
Tested-by: jenkins
In case of incorrect syntax, return ERROR_COMMAND_SYNTAX_ERROR so
the command framework will print the usage string.
Change-Id: I348debc77f470551d54fa77b4da780a48ff539c0
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8802
Tested-by: jenkins
The code of command 'adapter list' is called by command 'adapter
driver' to list the available drivers in case of error.
This dual possible entry points require a conditional check on the
number of command line arguments, reducing the code readability.
Split the command in a simpler code for the command 'adapter list'
that only checks the command line, and move in a common helper the
code that list the drivers.
While there, fix the output and the comments to report 'adapter
driver' instead of 'debug adapters'; we are not parsing the HW to
know which adapter is present.
Change-Id: I17538e86dc4a31a9589d404e49dcc65a29393390
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8672
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
The commit 93f2afa45f ("initial "transport" framework") that
added the transport framework in 2010 was overly optimistic on the
possibility to dynamically add, at runtime, a new adapter and to
specify with the command 'adapter transports' the list of the
transports supported by the new adapter.
Such feature has never become part of OpenOCD, and the command
above has never become useful nor ever been used.
Drop the command 'adapter transports' and its documentation.
Drop the helper 'transport_list_parse', now unused.
Change-Id: Ie3d71c74d068fba802839b116bb9bc9af77cc83d
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8671
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
