Based on the Intel Datasheet for the DH89xxCC PCH, the GPIO driver
is the same as ICH_v5_GPIO, minus the fact the DH89xxCC also has
blink support. However, blink support isn't supported by the GPIO
driver so we should use ICH_v5_GPIO. Tested and working on a Meraki
MX100-HW.
Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
Co-developed-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
On Cherry Trail devices with an AXP288 PMIC the external SD-card slot
used the AXP's DLDO2 as card-voltage and either DLDO3 or GPIO1LDO
(GPIO1 pin in low noise LDO mode) as signal-voltage.
These regulators are turned on/off and in case of the signal-voltage
also have their output-voltage changed by the _PS0 and _PS3 power-
management ACPI methods on the MMC-controllers ACPI fwnode as well as
by the _DSM ACPI method for changing the signal voltage.
The AML code implementing these methods is directly accessing the
PMIC through ACPI I2C OpRegion accesses, instead of using the special
PMIC OpRegion handled by drivers/acpi/pmic/intel_pmic_xpower.c .
This means that the contents of the involved PMIC registers can change
without the change being made through the regmap interface, so regmap
should not cache the contents of these registers.
Mark the regulator power on/off, the regulator voltage control and the
GPIO1 control registers as volatile, to avoid regmap caching them.
Specifically this fixes an issue on some models where the i915 driver
toggles another LDO using the same on/off register on/off through
MIPI sequences (through intel_soc_pmic_exec_mipi_pmic_seq_element())
which then writes back a cached on/off register-value where the
card-voltage is off causing the external sdcard slot to stop working
when the screen goes blank, or comes back on again.
The regulator register-range now marked volatile also includes the
buck regulator control registers. This is done on purpose these are
normally not touched by the AML code, but they are updated directly
by the SoC's PUNIT which means that they may also change without going
through regmap.
Note the AXP288 PMIC is only used on Bay- and Cherry-Trail platforms,
so even though this is an ACPI specific problem there is no need to
make the new volatile ranges conditional since these platforms always
use ACPI.
Fixes: dc91c3b6fe ("mfd: axp20x: Mark AXP20X_VBUS_IPSOUT_MGMT as volatile")
Fixes: cd53216625 ("mfd: axp20x: Fix axp288 volatile ranges")
Reported-and-tested-by: Clamshell <clamfly@163.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Add support for ClockMatrix(TM) and 82P33xxx families of timing
and synchronization devices. The access interface can be either
SPI or I2C. Currently, it will create 2 types of MFD devices,
which are to be used by the corresponding rsmu character device
driver and the PTP hardware clock driver, respectively.
Signed-off-by: Min Li <min.li.xe@renesas.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The kernel recovers in due course from missing Mlocked pages: but there
was no point in calling page_mlock() (formerly known as
try_to_munlock()) on a THP, because nothing got done even when it was
found to be mapped in another VM_LOCKED vma.
It's true that we need to be careful: Mlocked accounting of pte-mapped
THPs is too difficult (so consistently avoided); but Mlocked accounting
of only-pmd-mapped THPs is supposed to work, even when multiple mappings
are mlocked and munlocked or munmapped. Refine the tests.
There is already a VM_BUG_ON_PAGE(PageDoubleMap) in page_mlock(), so
page_mlock_one() does not even have to worry about that complication.
(I said the kernel recovers: but would page reclaim be likely to split
THP before rediscovering that it's VM_LOCKED? I've not followed that up)
Fixes: 9a73f61bdb ("thp, mlock: do not mlock PTE-mapped file huge pages")
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Link: https://lore.kernel.org/lkml/cfa154c-d595-406-eb7d-eb9df730f944@google.com/
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull irq fixes from Ingo Molnar:
"Two fixes:
- Fix a MIPS IRQ handling RCU bug
- Remove a DocBook annotation for a parameter that doesn't exist
anymore"
* tag 'irq-urgent-2021-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/mips: Fix RCU violation when using irqdomain lookup on interrupt entry
genirq/irqdesc: Drop excess kernel-doc entry @lookup
Pull scheduler fixes from Ingo Molnar:
"Three fixes:
- Fix load tracking bug/inconsistency
- Fix a sporadic CFS bandwidth constraints enforcement bug
- Fix a uclamp utilization tracking bug for newly woken tasks"
* tag 'sched-urgent-2021-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/uclamp: Ignore max aggregation if rq is idle
sched/fair: Fix CFS bandwidth hrtimer expiry type
sched/fair: Sync load_sum with load_avg after dequeue
Pull perf fixes from Ingo Molnar:
"A fix and a hardware-enablement addition:
- Robustify uncore_snbep's skx_iio_set_mapping()'s error cleanup
- Add cstate event support for Intel ICELAKE_X and ICELAKE_D"
* tag 'perf-urgent-2021-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/uncore: Clean up error handling path of iio mapping
perf/x86/cstate: Add ICELAKE_X and ICELAKE_D support
Pull locking fixes from Ingo Molnar:
- Fix a Sparc crash
- Fix a number of objtool warnings
- Fix /proc/lockdep output on certain configs
- Restore a kprobes fail-safe
* tag 'locking-urgent-2021-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/atomic: sparc: Fix arch_cmpxchg64_local()
kprobe/static_call: Restore missing static_call_text_reserved()
static_call: Fix static_call_text_reserved() vs __init
jump_label: Fix jump_label_text_reserved() vs __init
locking/lockdep: Fix meaningless /proc/lockdep output of lock classes on !CONFIG_PROVE_LOCKING
Pull more SCSI updates from James Bottomley:
"This is a set of minor fixes and clean ups in the core and various
drivers.
The only core change in behaviour is the I/O retry for spinup notify,
but that shouldn't impact anything other than the failing case"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (23 commits)
scsi: virtio_scsi: Add validation for residual bytes from response
scsi: ipr: System crashes when seeing type 20 error
scsi: core: Retry I/O for Notify (Enable Spinup) Required error
scsi: mpi3mr: Fix warnings reported by smatch
scsi: qedf: Add check to synchronize abort and flush
scsi: MAINTAINERS: Add mpi3mr driver maintainers
scsi: libfc: Fix array index out of bound exception
scsi: mvsas: Use DEVICE_ATTR_RO()/RW() macro
scsi: megaraid_mbox: Use DEVICE_ATTR_ADMIN_RO() macro
scsi: qedf: Use DEVICE_ATTR_RO() macro
scsi: qedi: Use DEVICE_ATTR_RO() macro
scsi: message: mptfc: Switch from pci_ to dma_ API
scsi: be2iscsi: Fix some missing space in some messages
scsi: be2iscsi: Fix an error handling path in beiscsi_dev_probe()
scsi: ufs: Fix build warning without CONFIG_PM
scsi: bnx2fc: Remove meaningless bnx2fc_abts_cleanup() return value assignment
scsi: qla2xxx: Add heartbeat check
scsi: virtio_scsi: Do not overwrite SCSI status
scsi: libsas: Add LUN number check in .slave_alloc callback
scsi: core: Inline scsi_mq_alloc_queue()
...
Pull more perf tool updates from Arnaldo Carvalho de Melo:
"New features:
- Enable use of BPF counters with 'perf stat --for-each-cgroup',
using per-CPU 'cgroup-switch' events with an attached BPF program
that does aggregation per-cgroup in the kernel instead of using
per-cgroup perf events.
- Add Topdown metrics L2 events as default events in 'perf stat' for
systems having those events.
Hardware tracing:
- Add a config for max loops without consuming a packet in the Intel
PT packet decoder, set via 'perf config intel-pt.max-loops=N'
Hardware enablement:
- Disable misleading NMI watchdog message in 'perf stat' on hybrid
systems such as Intel Alder Lake.
- Add a dummy event on hybrid systems to collect metadata records.
- Add 24x7 nest metric events for the Power10 platform.
Fixes:
- Fix event parsing for PMUs starting with the same prefix.
- Fix the 'perf trace' 'trace' alias installation dir.
- Fix buffer size to report iregs in perf script python scripts,
supporting the extended registers in PowerPC.
- Fix overflow in elf_sec__is_text().
- Fix 's' on source line when disasm is empty in the annotation TUI,
accessible via 'perf annotate', 'perf report' and 'perf top'.
- Plug leaks in scandir() returned dirent entries in 'perf test' when
sorting the shell tests.
- Fix --task and --stat with pipe input in 'perf report'.
- Fix 'perf probe' use of debuginfo files by build id.
- If a DSO has both dynsym and symtab ELF sections, read from both
when loading the symbol table, fixing a problem processing Fedora
32 glibc DSOs.
Libraries:
- Add grouping of events to libperf, from code in tools/perf,
allowing libperf users to use that mode.
Misc:
- Filter plt stubs from the 'perf probe --functions' output.
- Update UAPI header copies for asound, DRM, mman-common.h and the
ones affected by the quotactl_fd syscall"
* tag 'perf-tools-for-v5.14-2021-07-10' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (29 commits)
perf test: Add free() calls for scandir() returned dirent entries
libperf: Add tests for perf_evlist__set_leader()
libperf: Remove BUG_ON() from library code in get_group_fd()
libperf: Add group support to perf_evsel__open()
perf tools: Fix pattern matching for same substring in different PMU type
perf record: Add a dummy event on hybrid systems to collect metadata records
perf stat: Add Topdown metrics L2 events as default events
libperf: Adopt evlist__set_leader() from tools/perf as perf_evlist__set_leader()
libperf: Move 'nr_groups' from tools/perf to evlist::nr_groups
libperf: Move 'leader' from tools/perf to perf_evsel::leader
libperf: Move 'idx' from tools/perf to perf_evsel::idx
libperf: Change tests to single static and shared binaries
perf intel-pt: Add a config for max loops without consuming a packet
perf stat: Disable the NMI watchdog message on hybrid
perf vendor events power10: Adds 24x7 nest metric events for power10 platform
perf script python: Fix buffer size to report iregs in perf script
perf trace: Fix the perf trace link location
perf top: Fix overflow in elf_sec__is_text()
perf annotate: Fix 's' on source line when disasm is empty
perf probe: Do not show @plt function by default
...
Commit dbbee9d5cd ("mm/page_alloc: convert per-cpu list protection to
local_lock") folded in a workaround patch for pahole that was unable to
deal with zero-sized percpu structures.
A superior workaround is achieved with commit a0b8200d06 ("kbuild:
skip per-CPU BTF generation for pahole v1.18-v1.21").
This patch reverts the dummy field and the pahole version check.
Fixes: dbbee9d5cd ("mm/page_alloc: convert per-cpu list protection to local_lock")
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull cifs fixes from Steve French:
"13 cifs/smb3 fixes. Most are to address minor issues pointed out by
Coverity.
Also includes a packet signing enhancement and mount improvement"
* tag '5.14-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update internal version number
cifs: prevent NULL deref in cifs_compose_mount_options()
SMB3.1.1: Add support for negotiating signing algorithm
cifs: use helpers when parsing uid/gid mount options and validate them
CIFS: Clarify SMB1 code for POSIX Lock
CIFS: Clarify SMB1 code for rename open file
CIFS: Clarify SMB1 code for delete
CIFS: Clarify SMB1 code for SetFileSize
smb3: fix typo in header file
CIFS: Clarify SMB1 code for UnixSetPathInfo
CIFS: Clarify SMB1 code for UnixCreateSymLink
cifs: clarify SMB1 code for UnixCreateHardLink
cifs: make locking consistent around the server session status
Pull i3c updates from Alexandre Belloni:
- two small fixes to the svc driver
* tag 'i3c/for-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c: master: svc: fix doc warning in svc-i3c-master.c
i3c: master: svc: drop free_irq of devm_request_irq allocated irq
Pull thermal updates from Daniel Lezcano:
- Add rk3568 sensor support (Finley Xiao)
- Add missing MODULE_DEVICE_TABLE for the Spreadtrum sensor (Chunyan
Zhang)
- Export additionnal attributes for the int340x thermal processor
(Srinivas Pandruvada)
- Add SC7280 compatible for the tsens driver (Rajeshwari Ravindra
Kamble)
- Fix kernel documentation for thermal_zone_device_unregister() and use
devm_platform_get_and_ioremap_resource() (Yang Yingliang)
- Fix coefficient calculations for the rcar_gen3 sensor driver (Niklas
Söderlund)
- Fix shadowing variable rcar_gen3_ths_tj_1 (Geert Uytterhoeven)
- Add missing of_node_put() for the iMX and Spreadtrum sensors
(Krzysztof Kozlowski)
- Add tegra3 thermal sensor DT bindings (Dmitry Osipenko)
- Stop the thermal zone monitoring when unregistering it to prevent a
temperature update without the 'get_temp' callback (Dmitry Osipenko)
- Add rk3568 DT bindings, convert bindings to yaml schemas and add the
corresponding compatible in the Rockchip sensor (Ezequiel Garcia)
- Add the sc8180x compatible for the Qualcomm tsensor (Bjorn Andersson)
- Use the find_first_zero_bit() function instead of custom code (Andy
Shevchenko)
- Fix the kernel doc for the device cooling device (Yang Li)
- Reorg the processor thermal int340x to set the scene for the PCI mmio
driver (Srinivas Pandruvada)
- Add PCI MMIO driver for the int340x processor thermal driver
(Srinivas Pandruvada)
- Add hwmon sensors for the mediatek sensor (Frank Wunderlich)
- Fix warning for return value reported by Smatch for the int340x
thermal processor (Srinivas Pandruvada)
- Fix wrong register access and decoding for the int340x thermal
processor (Srinivas Pandruvada)
* tag 'thermal-v5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (23 commits)
thermal/drivers/int340x/processor_thermal: Fix tcc setting
thermal/drivers/int340x/processor_thermal: Fix warning for return value
thermal/drivers/mediatek: Add sensors-support
thermal/drivers/int340x/processor_thermal: Add PCI MMIO based thermal driver
thermal/drivers/int340x/processor_thermal: Split enumeration and processing part
thermal: devfreq_cooling: Fix kernel-doc
thermal/drivers/intel/intel_soc_dts_iosf: Switch to use find_first_zero_bit()
dt-bindings: thermal: tsens: Add sc8180x compatible
dt-bindings: rockchip-thermal: Support the RK3568 SoC compatible
dt-bindings: thermal: convert rockchip-thermal to json-schema
thermal/core/thermal_of: Stop zone device before unregistering it
dt-bindings: thermal: Add binding for Tegra30 thermal sensor
thermal/drivers/sprd: Add missing of_node_put for loop iteration
thermal/drivers/imx_sc: Add missing of_node_put for loop iteration
thermal/drivers/rcar_gen3_thermal: Do not shadow rcar_gen3_ths_tj_1
thermal/drivers/rcar_gen3_thermal: Fix coefficient calculations
thermal/drivers/st: Use devm_platform_get_and_ioremap_resource()
thermal/core: Correct function name thermal_zone_device_unregister()
dt-bindings: thermal: tsens: Add compatible string to TSENS binding for SC7280
thermal/drivers/int340x: processor_thermal: Export additional attributes
...
Chris Blake
Fei Shao
Martin Hundebøll
Hans de Goede
Liang Chen
Alex Bee
Min Li
Linus Torvalds
Hugh Dickins
Mel Gorman
Alexandre Belloni