Pull input fixes from Dmitry Torokhov:
- INPUT_PROP_HAPTIC_TOUCHPAD definition added early in 6.18 cycle has
been renamed to INPUT_PROP_PRESSUREPAD to better reflect the kind of
devices it is supposed to be set for
- a new ID for a touchscreen found in Ayaneo Flip DS in Goodix driver
- Goodix driver no longer tries to set reset pin as "input" as it
causes issues when there is no pull up resistor installed on the
board
- fixes for cros_ec_keyb, imx_sc_key, and pegasus-notetaker drivers to
deal with potential out-of-bounds access and memory corruption issues
* tag 'input-for-v6.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: rename INPUT_PROP_HAPTIC_TOUCHPAD to INPUT_PROP_PRESSUREPAD
Input: cros_ec_keyb - fix an invalid memory access
Input: imx_sc_key - fix memory corruption on unload
Input: pegasus-notetaker - fix potential out-of-bounds access
Input: goodix - remove setting of RST pin to input
Input: goodix - add support for ACPI ID GDIX1003
Pull RISC-V fixes from Paul Walmsley:
- Correct the MIPS RISC-V/JEDEC vendor ID
- Fix the system shutdown behavior in the legacy case where
CONFIG_RISCV_SBI_V01 is set, but the firmware implementation
doesn't support the older v0.1 system shutdown method
- Align some tools/ macro definitions with the corresponding
kernel headers
* tag 'riscv-for-linus-6.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
tools: riscv: Fixed misalignment of CSR related definitions
riscv: sbi: Prefer SRST shutdown over legacy
riscv: Update MIPS vendor id to 0x127
Pull selinux fixes from Paul Moore:
"Three SELinux patches for v6.18 to fix issues around accessing the
per-task decision cache that we introduced in v6.16 to help reduce
SELinux overhead on path walks. The problem was that despite the cache
being located in the SELinux "task_security_struct", the parent struct
wasn't actually tied to the task, it was tied to a cred.
Historically SELinux did locate the task_security_struct in the
task_struct's security blob, but it was later relocated to the cred
struct when the cred work happened, as it made the most sense at the
time.
Unfortunately we never did the task_security_struct to
cred_security_struct rename work (avoid code churn maybe? who knows)
because it didn't really matter at the time. However, it suddenly
became a problem when we added a per-task cache to a per-cred object
and didn't notice because of the old, no-longer-correct struct naming.
Thanks to KCSAN for flagging this, as the silly humans running things
forgot that the task_security_struct was a big lie.
This contains three patches, only one of which actually fixes the
problem described above and moves the SELinux decision cache from the
per-cred struct to a newly (re)created per-task struct.
The other two patches, which form the bulk of the diffstat, take care
of the associated renaming tasks so we can hopefully avoid making the
same stupid mistake in the future.
For the record, I did contemplate sending just a fix for the cache,
leaving the renaming patches for the upcoming merge window, but the
type/variable naming ended up being pretty awful and would have made
v6.18 an outlier stuck between the "old" names and the "new" names in
v6.19. The renaming patches are also fairly mechanical/trivial and
shouldn't pose much risk despite their size.
TLDR; naming things may be hard, but if you mess it up bad things
happen"
* tag 'selinux-pr-20251121' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: rename the cred_security_struct variables to "crsec"
selinux: move avdcache to per-task security struct
selinux: rename task_security_struct to cred_security_struct
Pull LoongArch fixes from Huacai Chen:
"Use UAPI types in ptrace UAPI header to fix nolibc ptrace.
Fix CPU name display, NUMA node parsing, kexec/kdump, PCI init and BPF
trampoline"
* tag 'loongarch-fixes-6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: BPF: Disable trampoline for kernel module function trace
LoongArch: Don't panic if no valid cache info for PCI
LoongArch: Mask all interrupts during kexec/kdump
LoongArch: Fix NUMA node parsing with numa_memblks
LoongArch: Consolidate CPU names in /proc/cpuinfo
LoongArch: Use UAPI types in ptrace UAPI header
Pull smb client fixes from Steve French:
- Fix potential memory leak in mount
- Add some missing read tracepoints
- Fix locking issue with directory leases
* tag 'v6.18-rc6-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Add the smb3_read_* tracepoints to SMB1
cifs: fix memory leak in smb3_fs_context_parse_param error path
smb: client: introduce close_cached_dir_locked()
Pull io_uring fix from Jens Axboe:
"Just a single fix for a mixup of arguments for the skb_queue_splice()
call, in the io_uring timestamp retrieval code"
* tag 'io_uring-6.18-20251120' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring/cmd_net: fix wrong argument types for skb_queue_splice()
Pull ata fixes from Niklas Cassel:
- Add a missing refcount decrement in ata_scsi_dev_rescan() when
the device or its queue is not running.
In the case where the device is running, the recount is already
decremented properly (Yihang Li)
- Generate the proper sense code for a Security locked device.
There was a regression caused by a recent change of how sense
data is generated for commands that did not provide any sense
data. This broke system suspend for Security locked devices.
Generate the sense data that the SCSI disk driver expects for a
Security locked device so that system suspend works again (me)
- Set capacity to zero for a Security locked device.
All I/O commands will be aborted by a Security locked device.
Thus, the block layer disk partition scanning will result in
a bunch of, for the user, confusing I/O errors in dmesg during
boot.
Since a Security locked device is unusable anyway, set the capacity
to zero, to avoid the disk partition scanning during boot. We still
create the block device in /dev such that the user may unlock the
device using e.g. hdparm (me)
* tag 'ata-6.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: libata-core: Set capacity to zero for a security locked drive
ata: libata-scsi: Fix system suspend for a security locked drive
ata: libata-scsi: Add missing scsi_device_put() in ata_scsi_dev_rescan()
Pull pin control fixes from Linus Walleij:
- Fix register naming in the Mediatek mt8189 driver
- Select REGMAP_MMIO for the Realtek RTD driver
- Fix the number of items in groups in the Toshiba Visconti driver
- Fix a memory leak in the Cirrus CS42L43 driver
- Fix a deadlock (!) in Qualcomm pinmux configuration
- Fix use of uninitialized memory and list initialization in the S32CC
pin controller
* tag 'pinctrl-v6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
dt-bindings: pinctrl: xlnx,versal-pinctrl: Add missing unevaluatedProperties on '^conf' nodes
pinctrl: s32cc: initialize gpio_pin_config::list after kmalloc()
pinctrl: s32cc: fix uninitialized memory in s32_pinctrl_desc
pinctrl: qcom: msm: Fix deadlock in pinmux configuration
pinctrl: cirrus: Fix fwnode leak in cs42l43_pin_probe()
dt-bindings: pinctrl: toshiba,visconti: Fix number of items in groups
pinctrl: realtek: Select REGMAP_MMIO for RTD driver
pinctrl: mediatek: mt8189: align register base names to dt-bindings ones
pinctrl: mediatek: mt8196: align register base names to dt-bindings ones
Pull gpio fixes from Bartosz Golaszewski:
- fix a use-after-free bug in GPIO character device code
- update MAINTAINERS
* tag 'gpio-fixes-for-v6.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
MAINTAINERS: update my email address
gpio: cdev: make sure the cdev fd is still active before emitting events
Pull drm fixes from Dave Airlie:
"A range of small fixes across the board, the i915 display
disambiguation is probably the biggest otherwise amdgpu and xe as
usual with tegra, nouveau, radeon and a core atomic fix.
Looks mostly normal.
atomic:
- Return error codes on failed blob creation for planes
nouveau:
- Fix memory leak
tegra:
- Fix device ref counting
- Fix pid ref counting
- Revert booting on Pixel C
xe:
- Fix out-of-bounds access with BIT()
- Fix kunit test checking wrong condition
- Drop duplicate kconfig select
- Fix guc2host irq handler with MSI-X
i915:
- Wildcat Lake and Panther Lake detangled for display fixes
amdgpu:
- DTBCLK gating fix
- EDID fetching retry improvements
- HDMI HPD debounce filtering
- DCN 2.0 cursor fix
- DP MST PBN fix
- VPE fix
- GC 11 fix
- PRT fix
- MMIO remap page fix
- SR-IOV fix
radeon:
- Fence deadlock fix"
* tag 'drm-fixes-2025-11-21' of https://gitlab.freedesktop.org/drm/kernel: (25 commits)
drm/amdgpu: Add sriov vf check for VCN per queue reset support.
drm/amdgpu/ttm: Fix crash when handling MMIO_REMAP in PDE flags
drm/amdgpu/vm: Check PRT uAPI flag instead of PTE flag
drm/amdgpu: Skip emit de meta data on gfx11 with rs64 enabled
drm/amd: Skip power ungate during suspend for VPE
drm/plane: Fix create_in_format_blob() return value
drm/xe/irq: Handle msix vector0 interrupt
drm/xe: Remove duplicate DRM_EXEC selection from Kconfig
drm/xe/kunit: Fix forcewake assertion in mocs test
drm/xe: Prevent BIT() overflow when handling invalid prefetch region
drm/radeon: delete radeon_fence_process in is_signaled, no deadlock
drm/amd/display: Fix pbn to kbps Conversion
drm/amd/display: Clear the CUR_ENABLE register on DCN20 on DPP5
drm/amd/display: Add an HPD filter for HDMI
drm/amd/display: Increase DPCD read retries
drm/amd/display: Move sleep into each retry for retrieve_link_cap()
drm/amd/display: Prevent Gating DTBCLK before It Is Properly Latched
drm/i915/xe3: Restrict PTL intel_encoder_is_c10phy() to only PHY A
drm/i915/display: Add definition for wcl as subplatform
drm/pcids: Split PTL pciids group to make wcl subplatform
...
Apparently as of version 2.42, glibc headers define AT_RENAME_NOREPLACE
and some of the other flags for renameat2() and friends in <stdio.h>.
Which would all be fine, except for inexplicable reasons glibc decided
to define them _differently_ from the kernel definitions, which then
makes some of our sample code that includes both kernel headers and user
space headers unhappy, because the compiler will (correctly) complain
about redefining things.
Now, mixing kernel headers and user space headers is always a somewhat
iffy proposition due to namespacing issues, but it's kind of inevitable
in our sample and selftest code. And this is just glibc being stupid.
Those defines come from the kernel, glibc is exposing the kernel
interfaces, and glibc shouldn't make up some random new expressions for
these values.
It's not like glibc headers changed the actual result values, but they
arbitrarily just decided to use a different expression to describe those
values. The kernel just does
#define AT_RENAME_NOREPLACE 0x0001
while glibc does
# define RENAME_NOREPLACE (1 << 0)
# define AT_RENAME_NOREPLACE RENAME_NOREPLACE
instead. Same value in the end, but very different macro definition.
For absolutely no reason.
This has since been fixed in the glibc development tree, so eventually
we'll end up with the canonical expressions and no clashes. But in the
meantime the broken headers are in the glibc-2.42 release and have made
it out into distributions.
Do a minimal work-around to make the samples build cleanly by just
undefining the affected macros in between the user space header include
and the kernel header includes.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Along with the renaming from task_security_struct to cred_security_struct,
rename the local variables to "crsec" from "tsec". This both fits with
existing conventions and helps distinguish between task and cred related
variables.
No functional changes.
Acked-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
The avdcache is meant to be per-task; move it to a new
task_security_struct that is duplicated per-task.
Cc: stable@vger.kernel.org
Fixes: 5d7ddc59b3 ("selinux: reduce path walk overhead")
Signed-off-by: Stephen Smalley <stephen.smalley.work@gmail.com>
[PM: line length fixes]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Before Linux had cred structures, the SELinux task_security_struct was
per-task and although the structure was switched to being per-cred
long ago, the name was never updated. This change renames it to
cred_security_struct to avoid confusion and pave the way for the
introduction of an actual per-task security structure for SELinux. No
functional change.
Cc: stable@vger.kernel.org
Signed-off-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Pull sched_ext fix from Tejun Heo:
"One low risk and obvious fix: scx_enable() was dereferencing an error
pointer on helper kthread creation failure. Fixed"
* tag 'sched_ext-for-6.18-rc6-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Fix scx_enable() crash on helper kthread creation failure
A crash was observed when the sched_ext selftests runner was
terminated with Ctrl+\ while test 15 was running:
NIP [c00000000028fa58] scx_enable.constprop.0+0x358/0x12b0
LR [c00000000028fa2c] scx_enable.constprop.0+0x32c/0x12b0
Call Trace:
scx_enable.constprop.0+0x32c/0x12b0 (unreliable)
bpf_struct_ops_link_create+0x18c/0x22c
__sys_bpf+0x23f8/0x3044
sys_bpf+0x2c/0x6c
system_call_exception+0x124/0x320
system_call_vectored_common+0x15c/0x2ec
kthread_run_worker() returns an ERR_PTR() on failure rather than NULL,
but the current code in scx_alloc_and_add_sched() only checks for a NULL
helper. Incase of failure on SIGQUIT, the error is not handled in
scx_alloc_and_add_sched() and scx_enable() ends up dereferencing an
error pointer.
Error handling is fixed in scx_alloc_and_add_sched() to propagate
PTR_ERR() into ret, so that scx_enable() jumps to the existing error
path, avoiding random dereference on failure.
Fixes: bff3b5aec1 ("sched_ext: Move disable machinery into scx_sched")
Cc: stable@vger.kernel.org # v6.16+
Reported-and-tested-by: Samir Mulani <samir@linux.ibm.com>
Signed-off-by: Saket Kumar Bhaskar <skb99@linux.ibm.com>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Reviewed-by: Vishal Chourasia <vishalc@linux.ibm.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
If timestamp retriving needs to be retried and the local list of
SKB's already has entries, then it's spliced back into the socket
queue. However, the arguments for the splice helper are transposed,
causing exactly the wrong direction of splicing into the on-stack
list. Fix that up.
Cc: stable@vger.kernel.org
Reported-by: Google Big Sleep <big-sleep-vuln-reports+bigsleep-462435176@google.com>
Fixes: 9e4ed359b8 ("io_uring/netcmd: add tx timestamping cmd support")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull power management fix from Rafael Wysocki:
"Fix a regression introduced during the 6.16 development cycle that may
cause runtime PM to be enabled by mistake for devices that do not
support it (which may lead to some serious trouble) if there is a
system wakeup event during the "late suspend" phase of system suspend"
* tag 'pm-6.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: sleep: core: Fix runtime PM enabling in device_resume_early()
Pull ACPI fix from Rafael Wysocki:
"This fixes EINJV2 support introduced during the 6.17 cycle by
unbreaking the initialization broken by a previous attempted fix,
adding sanity checks for data coming from the platform firmware, and
updating the code to handle injecting legacy error types on an EINJV2
capable systems properly (Tony Luck)"
* tag 'acpi-6.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: APEI: EINJ: Fix EINJV2 initialization and injection
Linus Torvalds
Dave Airlie
Paul Moore
Stephen Smalley
Saket Kumar Bhaskar
Jens Axboe