mirror of
https://github.com/linux-msm/laptops-kernel.git
synced 2026-08-13 14:19:53 -07:00
d78ddeb8938a366aabfabf60255c1a94de8d8ea1
4379
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 Daniel Borkmann
|
bc308be380 |
bpf: Fix sync_linked_regs regarding BPF_ADD_CONST32 zext propagation
Jenny reported that in sync_linked_regs() the BPF_ADD_CONST32 flag is
checked on known_reg (the register narrowed by a conditional branch)
instead of reg (the linked target register created by an alu32 operation).
Example case with reg:
1. r6 = bpf_get_prandom_u32()
2. r7 = r6 (linked, same id)
3. w7 += 5 (alu32 -- r7 gets BPF_ADD_CONST32, zero-extended by CPU)
4. if w6 < 0xFFFFFFFC goto safe (narrows r6 to [0xFFFFFFFC, 0xFFFFFFFF])
5. sync_linked_regs() propagates to r7 but does NOT call zext_32_to_64()
6. Verifier thinks r7 is [0x100000001, 0x100000004] instead of [1, 4]
Since known_reg above does not have BPF_ADD_CONST32 set above, zext_32_to_64()
is never called on alu32-derived linked registers. This causes the verifier
to track incorrect 64-bit bounds, while the CPU correctly zero-extends the
32-bit result.
The code checking known_reg->id was correct however (see scalars_alu32_wrap
selftest case), but the real fix needs to handle both directions - zext
propagation should be done when either register has BPF_ADD_CONST32, since
the linked relationship involves a 32-bit operation regardless of which
side has the flag.
Example case with known_reg (exercised also by scalars_alu32_wrap):
1. r1 = r0; w1 += 0x100 (alu32 -- r1 gets BPF_ADD_CONST32)
2. if r1 > 0x80 - known_reg = r1 (has BPF_ADD_CONST32), reg = r0 (doesn't)
Hence, fix it by checking for (reg->id | known_reg->id) & BPF_ADD_CONST32.
Moreover, sync_linked_regs() also has a soundness issue when two linked
registers used different ALU widths: one with BPF_ADD_CONST32 and the
other with BPF_ADD_CONST64. The delta relationship between linked registers
assumes the same arithmetic width though. When one register went through
alu32 (CPU zero-extends the 32-bit result) and the other went through
alu64 (no zero-extension), the propagation produces incorrect bounds.
Example:
r6 = bpf_get_prandom_u32() // fully unknown
if r6 >= 0x100000000 goto out // constrain r6 to [0, U32_MAX]
r7 = r6
w7 += 1 // alu32: r7.id = N | BPF_ADD_CONST32
r8 = r6
r8 += 2 // alu64: r8.id = N | BPF_ADD_CONST64
if r7 < 0xFFFFFFFF goto out // narrows r7 to [0xFFFFFFFF, 0xFFFFFFFF]
At the branch on r7, sync_linked_regs() runs with known_reg=r7
(BPF_ADD_CONST32) and reg=r8 (BPF_ADD_CONST64). The delta path
computes:
r8 = r7 + (delta_r8 - delta_r7) = 0xFFFFFFFF + (2 - 1) = 0x100000000
Then, because known_reg->id has BPF_ADD_CONST32, zext_32_to_64(r8) is
called, truncating r8 to [0, 0]. But r8 used a 64-bit ALU op -- the
CPU does NOT zero-extend it. The actual CPU value of r8 is
0xFFFFFFFE + 2 = 0x100000000, not 0. The verifier now underestimates
r8's 64-bit bounds, which is a soundness violation.
Fix sync_linked_regs() by skipping propagation when the two registers
have mixed ALU widths (one BPF_ADD_CONST32, the other BPF_ADD_CONST64).
Lastly, fix regsafe() used for path pruning: the existing checks used
"& BPF_ADD_CONST" to test for offset linkage, which treated
BPF_ADD_CONST32 and BPF_ADD_CONST64 as equivalent.
Fixes:
|
||
 Daniel Wade
|
c845894ebd |
bpf: Fix unsound scalar forking in maybe_fork_scalars() for BPF_OR
maybe_fork_scalars() is called for both BPF_AND and BPF_OR when the
source operand is a constant. When dst has signed range [-1, 0], it
forks the verifier state: the pushed path gets dst = 0, the current
path gets dst = -1.
For BPF_AND this is correct: 0 & K == 0.
For BPF_OR this is wrong: 0 | K == K, not 0.
The pushed path therefore tracks dst as 0 when the runtime value is K,
producing an exploitable verifier/runtime divergence that allows
out-of-bounds map access.
Fix this by passing env->insn_idx (instead of env->insn_idx + 1) to
push_stack(), so the pushed path re-executes the ALU instruction with
dst = 0 and naturally computes the correct result for any opcode.
Fixes:
|
||
 Jenny Guanni Qu
|
c77b30bd1d |
bpf: Fix undefined behavior in interpreter sdiv/smod for INT_MIN
The BPF interpreter's signed 32-bit division and modulo handlers use
the kernel abs() macro on s32 operands. The abs() macro documentation
(include/linux/math.h) explicitly states the result is undefined when
the input is the type minimum. When DST contains S32_MIN (0x80000000),
abs((s32)DST) triggers undefined behavior and returns S32_MIN unchanged
on arm64/x86. This value is then sign-extended to u64 as
0xFFFFFFFF80000000, causing do_div() to compute the wrong result.
The verifier's abstract interpretation (scalar32_min_max_sdiv) computes
the mathematically correct result for range tracking, creating a
verifier/interpreter mismatch that can be exploited for out-of-bounds
map value access.
Introduce abs_s32() which handles S32_MIN correctly by casting to u32
before negating, avoiding signed overflow entirely. Replace all 8
abs((s32)...) call sites in the interpreter's sdiv32/smod32 handlers.
s32 is the only affected case -- the s64 division/modulo handlers do
not use abs().
Fixes:
|
||
 Ihor Solodrai
|
6c2128505f |
bpf: Fix exception exit lock checking for subprogs
process_bpf_exit_full() passes check_lock = !curframe to
check_resource_leak(), which is false in cases when bpf_throw() is
called from a static subprog. This makes check_resource_leak() to skip
validation of active_rcu_locks, active_preempt_locks, and
active_irq_id on exception exits from subprogs.
At runtime bpf_throw() unwinds the stack via ORC without releasing any
user-acquired locks, which may cause various issues as the result.
Fix by setting check_lock = true for exception exits regardless of
curframe, since exceptions bypass all intermediate frame
cleanup. Update the error message prefix to "bpf_throw" for exception
exits to distinguish them from normal BPF_EXIT.
Fix reject_subprog_with_rcu_read_lock test which was previously
passing for the wrong reason. Test program returned directly from the
subprog call without closing the RCU section, so the error was
triggered by the unclosed RCU lock on normal exit, not by
bpf_throw. Update __msg annotations for affected tests to match the
new "bpf_throw" error prefix.
The spin_lock case is not affected because they are already checked [1]
at the call site in do_check_insn() before bpf_throw can run.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/kernel/bpf/verifier.c?h=v7.0-rc4#n21098
Assisted-by: Claude:claude-opus-4-6
Fixes:
|
||
 Kumar Kartikeya Dwivedi
|
146bd2a87a |
bpf: Release module BTF IDR before module unload
Gregory reported in [0] that the global_map_resize test when run in
repeatedly ends up failing during program load. This stems from the fact
that BTF reference has not dropped to zero after the previous run's
module is unloaded, and the older module's BTF is still discoverable and
visible. Later, in libbpf, load_module_btfs() will find the ID for this
stale BTF, open its fd, and then it will be used during program load
where later steps taking module reference using btf_try_get_module()
fail since the underlying module for the BTF is gone.
Logically, once a module is unloaded, it's associated BTF artifacts
should become hidden. The BTF object inside the kernel may still remain
alive as long its reference counts are alive, but it should no longer be
discoverable.
To fix this, let us call btf_free_id() from the MODULE_STATE_GOING case
for the module unload to free the BTF associated IDR entry, and disable
its discovery once module unload returns to user space. If a race
happens during unload, the outcome is non-deterministic anyway. However,
user space should be able to rely on the guarantee that once it has
synchronously established a successful module unload, no more stale
artifacts associated with this module can be obtained subsequently.
Note that we must be careful to not invoke btf_free_id() in btf_put()
when btf_is_module() is true now. There could be a window where the
module unload drops a non-terminal reference, frees the IDR, but the
same ID gets reused and the second unconditional btf_free_id() ends up
releasing an unrelated entry.
To avoid a special case for btf_is_module() case, set btf->id to zero to
make btf_free_id() idempotent, such that we can unconditionally invoke it
from btf_put(), and also from the MODULE_STATE_GOING case. Since zero is
an invalid IDR, the idr_remove() should be a noop.
Note that we can be sure that by the time we reach final btf_put() for
btf_is_module() case, the btf_free_id() is already done, since the
module itself holds the BTF reference, and it will call this function
for the BTF before dropping its own reference.
[0]: https://lore.kernel.org/bpf/cover.1773170190.git.grbell@redhat.com
Fixes:
|
||
 Sachin Kumar
|
2321a9596d |
bpf: Fix constant blinding for PROBE_MEM32 stores
BPF_ST | BPF_PROBE_MEM32 immediate stores are not handled by
bpf_jit_blind_insn(), allowing user-controlled 32-bit immediates to
survive unblinded into JIT-compiled native code when bpf_jit_harden >= 1.
The root cause is that convert_ctx_accesses() rewrites BPF_ST|BPF_MEM
to BPF_ST|BPF_PROBE_MEM32 for arena pointer stores during verification,
before bpf_jit_blind_constants() runs during JIT compilation. The
blinding switch only matches BPF_ST|BPF_MEM (mode 0x60), not
BPF_ST|BPF_PROBE_MEM32 (mode 0xa0). The instruction falls through
unblinded.
Add BPF_ST|BPF_PROBE_MEM32 cases to bpf_jit_blind_insn() alongside the
existing BPF_ST|BPF_MEM cases. The blinding transformation is identical:
load the blinded immediate into BPF_REG_AX via mov+xor, then convert
the immediate store to a register store (BPF_STX).
The rewritten STX instruction must preserve the BPF_PROBE_MEM32 mode so
the architecture JIT emits the correct arena addressing (R12-based on
x86-64). Cannot use the BPF_STX_MEM() macro here because it hardcodes
BPF_MEM mode; construct the instruction directly instead.
Fixes:
|
||
 Yazhou Tang
|
a3125bc018 |
bpf: Reset register ID for BPF_END value tracking
When a register undergoes a BPF_END (byte swap) operation, its scalar
value is mutated in-place. If this register previously shared a scalar ID
with another register (e.g., after an `r1 = r0` assignment), this tie must
be broken.
Currently, the verifier misses resetting `dst_reg->id` to 0 for BPF_END.
Consequently, if a conditional jump checks the swapped register, the
verifier incorrectly propagates the learned bounds to the linked register,
leading to false confidence in the linked register's value and potentially
allowing out-of-bounds memory accesses.
Fix this by explicitly resetting `dst_reg->id` to 0 in the BPF_END case
to break the scalar tie, similar to how BPF_NEG handles it via
`__mark_reg_known`.
Fixes:
|
||
 Linus Torvalds
|
8b7f4cd3ac |
Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull bpf fixes from Alexei Starovoitov: - Fix u32/s32 bounds when ranges cross min/max boundary (Eduard Zingerman) - Fix precision backtracking with linked registers (Eduard Zingerman) - Fix linker flags detection for resolve_btfids (Ihor Solodrai) - Fix race in update_ftrace_direct_add/del (Jiri Olsa) - Fix UAF in bpf_trampoline_link_cgroup_shim (Lang Xu) * tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: resolve_btfids: Fix linker flags detection selftests/bpf: add reproducer for spurious precision propagation through calls bpf: collect only live registers in linked regs Revert "selftests/bpf: Update reg_bound range refinement logic" selftests/bpf: test refining u32/s32 bounds when ranges cross min/max boundary bpf: Fix u32/s32 bounds when ranges cross min/max boundary bpf: Fix a UAF issue in bpf_trampoline_link_cgroup_shim ftrace: Add missing ftrace_lock to update_ftrace_direct_add/del |
||
 Eduard Zingerman
|
2658a1720a |
bpf: collect only live registers in linked regs
Fix an inconsistency between func_states_equal() and
collect_linked_regs():
- regsafe() uses check_ids() to verify that cached and current states
have identical register id mapping.
- func_states_equal() calls regsafe() only for registers computed as
live by compute_live_registers().
- clean_live_states() is supposed to remove dead registers from cached
states, but it can skip states belonging to an iterator-based loop.
- collect_linked_regs() collects all registers sharing the same id,
ignoring the marks computed by compute_live_registers().
Linked registers are stored in the state's jump history.
- backtrack_insn() marks all linked registers for an instruction
as precise whenever one of the linked registers is precise.
The above might lead to a scenario:
- There is an instruction I with register rY known to be dead at I.
- Instruction I is reached via two paths: first A, then B.
- On path A:
- There is an id link between registers rX and rY.
- Checkpoint C is created at I.
- Linked register set {rX, rY} is saved to the jump history.
- rX is marked as precise at I, causing both rX and rY
to be marked precise at C.
- On path B:
- There is no id link between registers rX and rY,
otherwise register states are sub-states of those in C.
- Because rY is dead at I, check_ids() returns true.
- Current state is considered equal to checkpoint C,
propagate_precision() propagates spurious precision
mark for register rY along the path B.
- Depending on a program, this might hit verifier_bug()
in the backtrack_insn(), e.g. if rY ∈ [r1..r5]
and backtrack_insn() spots a function call.
The reproducer program is in the next patch.
This was hit by sched_ext scx_lavd scheduler code.
Changes in tests:
- verifier_scalar_ids.c selftests need modification to preserve
some registers as live for __msg() checks.
- exceptions_assert.c adjusted to match changes in the verifier log,
R0 is dead after conditional instruction and thus does not get
range.
- precise.c adjusted to match changes in the verifier log, register r9
is dead after comparison and it's range is not important for test.
Reported-by: Emil Tsalapatis <emil@etsalapatis.com>
Fixes:
|
||
|
Eduard Zingerman
|
fbc7aef517 |
bpf: Fix u32/s32 bounds when ranges cross min/max boundary
Same as in __reg64_deduce_bounds(), refine s32/u32 ranges in __reg32_deduce_bounds() in the following situations: - s32 range crosses U32_MAX/0 boundary, positive part of the s32 range overlaps with u32 range: 0 U32_MAX | [xxxxxxxxxxxxxx u32 range xxxxxxxxxxxxxx] | |----------------------------|----------------------------| |xxxxx s32 range xxxxxxxxx] [xxxxxxx| 0 S32_MAX S32_MIN -1 - s32 range crosses U32_MAX/0 boundary, negative part of the s32 range overlaps with u32 range: 0 U32_MAX | [xxxxxxxxxxxxxx u32 range xxxxxxxxxxxxxx] | |----------------------------|----------------------------| |xxxxxxxxx] [xxxxxxxxxxxx s32 range | 0 S32_MAX S32_MIN -1 - No refinement if ranges overlap in two intervals. This helps for e.g. consider the following program: call %[bpf_get_prandom_u32]; w0 &= 0xffffffff; if w0 < 0x3 goto 1f; // on fall-through u32 range [3..U32_MAX] if w0 s> 0x1 goto 1f; // on fall-through s32 range [S32_MIN..1] if w0 s< 0x0 goto 1f; // range can be narrowed to [S32_MIN..-1] r10 = 0; 1: ...; The reg_bounds.c selftest is updated to incorporate identical logic, refinement based on non-overflowing range halves: ((x ∩ [0, smax]) ∩ (y ∩ [0, smax])) ∪ ((x ∩ [smin,-1]) ∩ (y ∩ [smin,-1])) Reported-by: Andrea Righi <arighi@nvidia.com> Reported-by: Emil Tsalapatis <emil@etsalapatis.com> Closes: https://lore.kernel.org/bpf/aakqucg4vcujVwif@gpd4/T/ Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com> Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com> Signed-off-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/r/20260306-bpf-32-bit-range-overflow-v3-1-f7f67e060a6b@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
 Christian Loehle
|
7fe44c4388 |
bpf: drop kthread_exit from noreturn_deny
kthread_exit became a macro to do_exit in commit
|
||
 Lang Xu
|
56145d2373 |
bpf: Fix a UAF issue in bpf_trampoline_link_cgroup_shim
The root cause of this bug is that when 'bpf_link_put' reduces the
refcount of 'shim_link->link.link' to zero, the resource is considered
released but may still be referenced via 'tr->progs_hlist' in
'cgroup_shim_find'. The actual cleanup of 'tr->progs_hlist' in
'bpf_shim_tramp_link_release' is deferred. During this window, another
process can cause a use-after-free via 'bpf_trampoline_link_cgroup_shim'.
Based on Martin KaFai Lau's suggestions, I have created a simple patch.
To fix this:
Add an atomic non-zero check in 'bpf_trampoline_link_cgroup_shim'.
Only increment the refcount if it is not already zero.
Testing:
I verified the fix by adding a delay in
'bpf_shim_tramp_link_release' to make the bug easier to trigger:
static void bpf_shim_tramp_link_release(struct bpf_link *link)
{
/* ... */
if (!shim_link->trampoline)
return;
+ msleep(100);
WARN_ON_ONCE(bpf_trampoline_unlink_prog(&shim_link->link,
shim_link->trampoline, NULL));
bpf_trampoline_put(shim_link->trampoline);
}
Before the patch, running a PoC easily reproduced the crash(almost 100%)
with a call trace similar to KaiyanM's report.
After the patch, the bug no longer occurs even after millions of
iterations.
Fixes:
|
||
 Paul Chaignon
|
efc11a6678 |
bpf: Improve bounds when tnum has a single possible value
We're hitting an invariant violation in Cilium that sometimes leads to
BPF programs being rejected and Cilium failing to start [1]. The
following extract from verifier logs shows what's happening:
from 201 to 236: R1=0 R6=ctx() R7=1 R9=scalar(smin=umin=smin32=umin32=3584,smax=umax=smax32=umax32=3840,var_off=(0xe00; 0x100)) R10=fp0
236: R1=0 R6=ctx() R7=1 R9=scalar(smin=umin=smin32=umin32=3584,smax=umax=smax32=umax32=3840,var_off=(0xe00; 0x100)) R10=fp0
; if (magic == MARK_MAGIC_HOST || magic == MARK_MAGIC_OVERLAY || magic == MARK_MAGIC_ENCRYPT) @ bpf_host.c:1337
236: (16) if w9 == 0xe00 goto pc+45 ; R9=scalar(smin=umin=smin32=umin32=3585,smax=umax=smax32=umax32=3840,var_off=(0xe00; 0x100))
237: (16) if w9 == 0xf00 goto pc+1
verifier bug: REG INVARIANTS VIOLATION (false_reg1): range bounds violation u64=[0xe01, 0xe00] s64=[0xe01, 0xe00] u32=[0xe01, 0xe00] s32=[0xe01, 0xe00] var_off=(0xe00, 0x0)
We reach instruction 236 with two possible values for R9, 0xe00 and
0xf00. This is perfectly reflected in the tnum, but of course the ranges
are less accurate and cover [0xe00; 0xf00]. Taking the fallthrough path
at instruction 236 allows the verifier to reduce the range to
[0xe01; 0xf00]. The tnum is however not updated.
With these ranges, at instruction 237, the verifier is not able to
deduce that R9 is always equal to 0xf00. Hence the fallthrough pass is
explored first, the verifier refines the bounds using the assumption
that R9 != 0xf00, and ends up with an invariant violation.
This pattern of impossible branch + bounds refinement is common to all
invariant violations seen so far. The long-term solution is likely to
rely on the refinement + invariant violation check to detect dead
branches, as started by Eduard. To fix the current issue, we need
something with less refactoring that we can backport.
This patch uses the tnum_step helper introduced in the previous patch to
detect the above situation. In particular, three cases are now detected
in the bounds refinement:
1. The u64 range and the tnum only overlap in umin.
u64: ---[xxxxxx]-----
tnum: --xx----------x-
2. The u64 range and the tnum only overlap in the maximum value
represented by the tnum, called tmax.
u64: ---[xxxxxx]-----
tnum: xx-----x--------
3. The u64 range and the tnum only overlap in between umin (excluded)
and umax.
u64: ---[xxxxxx]-----
tnum: xx----x-------x-
To detect these three cases, we call tnum_step(tnum, umin), which
returns the smallest member of the tnum greater than umin, called
tnum_next here. We're in case (1) if umin is part of the tnum and
tnum_next is greater than umax. We're in case (2) if umin is not part of
the tnum and tnum_next is equal to tmax. Finally, we're in case (3) if
umin is not part of the tnum, tnum_next is inferior or equal to umax,
and calling tnum_step a second time gives us a value past umax.
This change implements these three cases. With it, the above bytecode
looks as follows:
0: (85) call bpf_get_prandom_u32#7 ; R0=scalar()
1: (47) r0 |= 3584 ; R0=scalar(smin=0x8000000000000e00,umin=umin32=3584,smin32=0x80000e00,var_off=(0xe00; 0xfffffffffffff1ff))
2: (57) r0 &= 3840 ; R0=scalar(smin=umin=smin32=umin32=3584,smax=umax=smax32=umax32=3840,var_off=(0xe00; 0x100))
3: (15) if r0 == 0xe00 goto pc+2 ; R0=3840
4: (15) if r0 == 0xf00 goto pc+1
4: R0=3840
6: (95) exit
In addition to the new selftests, this change was also verified with
Agni [3]. For the record, the raw SMT is available at [4]. The property
it verifies is that: If a concrete value x is contained in all input
abstract values, after __update_reg_bounds, it will continue to be
contained in all output abstract values.
Link: https://github.com/cilium/cilium/issues/44216 [1]
Link: https://pchaigno.github.io/test-verifier-complexity.html [2]
Link: https://github.com/bpfverif/agni [3]
Link: https://pastebin.com/raw/naCfaqNx [4]
Fixes:
|
||
 Harishankar Vishwanathan
|
76e954155b |
bpf: Introduce tnum_step to step through tnum's members
This commit introduces tnum_step(), a function that, when given t, and a
number z returns the smallest member of t larger than z. The number z
must be greater or equal to the smallest member of t and less than the
largest member of t.
The first step is to compute j, a number that keeps all of t's known
bits, and matches all unknown bits to z's bits. Since j is a member of
the t, it is already a candidate for result. However, we want our result
to be (minimally) greater than z.
There are only two possible cases:
(1) Case j <= z. In this case, we want to increase the value of j and
make it > z.
(2) Case j > z. In this case, we want to decrease the value of j while
keeping it > z.
(Case 1) j <= z
t = xx11x0x0
z = 10111101 (189)
j = 10111000 (184)
^
k
(Case 1.1) Let's first consider the case where j < z. We will address j
== z later.
Since z > j, there had to be a bit position that was 1 in z and a 0 in
j, beyond which all positions of higher significance are equal in j and
z. Further, this position could not have been unknown in a, because the
unknown positions of a match z. This position had to be a 1 in z and
known 0 in t.
Let k be position of the most significant 1-to-0 flip. In our example, k
= 3 (starting the count at 1 at the least significant bit). Setting (to
1) the unknown bits of t in positions of significance smaller than
k will not produce a result > z. Hence, we must set/unset the unknown
bits at positions of significance higher than k. Specifically, we look
for the next larger combination of 1s and 0s to place in those
positions, relative to the combination that exists in z. We can achieve
this by concatenating bits at unknown positions of t into an integer,
adding 1, and writing the bits of that result back into the
corresponding bit positions previously extracted from z.
>From our example, considering only positions of significance greater
than k:
t = xx..x
z = 10..1
+ 1
-----
11..0
This is the exact combination 1s and 0s we need at the unknown bits of t
in positions of significance greater than k. Further, our result must
only increase the value minimally above z. Hence, unknown bits in
positions of significance smaller than k should remain 0. We finally
have,
result = 11110000 (240)
(Case 1.2) Now consider the case when j = z, for example
t = 1x1x0xxx
z = 10110100 (180)
j = 10110100 (180)
Matching the unknown bits of the t to the bits of z yielded exactly z.
To produce a number greater than z, we must set/unset the unknown bits
in t, and *all* the unknown bits of t candidates for being set/unset. We
can do this similar to Case 1.1, by adding 1 to the bits extracted from
the masked bit positions of z. Essentially, this case is equivalent to
Case 1.1, with k = 0.
t = 1x1x0xxx
z = .0.1.100
+ 1
---------
.0.1.101
This is the exact combination of bits needed in the unknown positions of
t. After recalling the known positions of t, we get
result = 10110101 (181)
(Case 2) j > z
t = x00010x1
z = 10000010 (130)
j = 10001011 (139)
^
k
Since j > z, there had to be a bit position which was 0 in z, and a 1 in
j, beyond which all positions of higher significance are equal in j and
z. This position had to be a 0 in z and known 1 in t. Let k be the
position of the most significant 0-to-1 flip. In our example, k = 4.
Because of the 0-to-1 flip at position k, a member of t can become
greater than z if the bits in positions greater than k are themselves >=
to z. To make that member *minimally* greater than z, the bits in
positions greater than k must be exactly = z. Hence, we simply match all
of t's unknown bits in positions more significant than k to z's bits. In
positions less significant than k, we set all t's unknown bits to 0
to retain minimality.
In our example, in positions of greater significance than k (=4),
t=x000. These positions are matched with z (1000) to produce 1000. In
positions of lower significance than k, t=10x1. All unknown bits are set
to 0 to produce 1001. The final result is:
result = 10001001 (137)
This concludes the computation for a result > z that is a member of t.
The procedure for tnum_step() in this commit implements the idea
described above. As a proof of correctness, we verified the algorithm
against a logical specification of tnum_step. The specification asserts
the following about the inputs t, z and output res that:
1. res is a member of t, and
2. res is strictly greater than z, and
3. there does not exist another value res2 such that
3a. res2 is also a member of t, and
3b. res2 is greater than z
3c. res2 is smaller than res
We checked the implementation against this logical specification using
an SMT solver. The verification formula in SMTLIB format is available
at [1]. The verification returned an "unsat": indicating that no input
assignment exists for which the implementation and the specification
produce different outputs.
In addition, we also automatically generated the logical encoding of the
C implementation using Agni [2] and verified it against the same
specification. This verification also returned an "unsat", confirming
that the implementation is equivalent to the specification. The formula
for this check is also available at [3].
Link: https://pastebin.com/raw/2eRWbiit [1]
Link: https://github.com/bpfverif/agni [2]
Link: https://pastebin.com/raw/EztVbBJ2 [3]
Co-developed-by: Srinivas Narayana <srinivas.narayana@rutgers.edu>
Signed-off-by: Srinivas Narayana <srinivas.narayana@rutgers.edu>
Co-developed-by: Santosh Nagarakatte <santosh.nagarakatte@rutgers.edu>
Signed-off-by: Santosh Nagarakatte <santosh.nagarakatte@rutgers.edu>
Signed-off-by: Harishankar Vishwanathan <harishankar.vishwanathan@gmail.com>
Link: https://lore.kernel.org/r/93fdf71910411c0f19e282ba6d03b4c65f9c5d73.1772225741.git.paul.chaignon@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
||
 Jiayuan Chen
|
1872e75375 |
bpf: Fix race in devmap on PREEMPT_RT
On PREEMPT_RT kernels, the per-CPU xdp_dev_bulk_queue (bq) can be
accessed concurrently by multiple preemptible tasks on the same CPU.
The original code assumes bq_enqueue() and __dev_flush() run atomically
with respect to each other on the same CPU, relying on
local_bh_disable() to prevent preemption. However, on PREEMPT_RT,
local_bh_disable() only calls migrate_disable() (when
PREEMPT_RT_NEEDS_BH_LOCK is not set) and does not disable
preemption, which allows CFS scheduling to preempt a task during
bq_xmit_all(), enabling another task on the same CPU to enter
bq_enqueue() and operate on the same per-CPU bq concurrently.
This leads to several races:
1. Double-free / use-after-free on bq->q[]: bq_xmit_all() snapshots
cnt = bq->count, then iterates bq->q[0..cnt-1] to transmit frames.
If preempted after the snapshot, a second task can call bq_enqueue()
-> bq_xmit_all() on the same bq, transmitting (and freeing) the
same frames. When the first task resumes, it operates on stale
pointers in bq->q[], causing use-after-free.
2. bq->count and bq->q[] corruption: concurrent bq_enqueue() modifying
bq->count and bq->q[] while bq_xmit_all() is reading them.
3. dev_rx/xdp_prog teardown race: __dev_flush() clears bq->dev_rx and
bq->xdp_prog after bq_xmit_all(). If preempted between
bq_xmit_all() return and bq->dev_rx = NULL, a preempting
bq_enqueue() sees dev_rx still set (non-NULL), skips adding bq to
the flush_list, and enqueues a frame. When __dev_flush() resumes,
it clears dev_rx and removes bq from the flush_list, orphaning the
newly enqueued frame.
4. __list_del_clearprev() on flush_node: similar to the cpumap race,
both tasks can call __list_del_clearprev() on the same flush_node,
the second dereferences the prev pointer already set to NULL.
The race between task A (__dev_flush -> bq_xmit_all) and task B
(bq_enqueue -> bq_xmit_all) on the same CPU:
Task A (xdp_do_flush) Task B (ndo_xdp_xmit redirect)
---------------------- --------------------------------
__dev_flush(flush_list)
bq_xmit_all(bq)
cnt = bq->count /* e.g. 16 */
/* start iterating bq->q[] */
<-- CFS preempts Task A -->
bq_enqueue(dev, xdpf)
bq->count == DEV_MAP_BULK_SIZE
bq_xmit_all(bq, 0)
cnt = bq->count /* same 16! */
ndo_xdp_xmit(bq->q[])
/* frames freed by driver */
bq->count = 0
<-- Task A resumes -->
ndo_xdp_xmit(bq->q[])
/* use-after-free: frames already freed! */
Fix this by adding a local_lock_t to xdp_dev_bulk_queue and acquiring
it in bq_enqueue() and __dev_flush(). These paths already run under
local_bh_disable(), so use local_lock_nested_bh() which on non-RT is
a pure annotation with no overhead, and on PREEMPT_RT provides a
per-CPU sleeping lock that serializes access to the bq.
Fixes:
|
||
|
Jiayuan Chen
|
869c63d597 |
bpf: Fix race in cpumap on PREEMPT_RT
On PREEMPT_RT kernels, the per-CPU xdp_bulk_queue (bq) can be accessed
concurrently by multiple preemptible tasks on the same CPU.
The original code assumes bq_enqueue() and __cpu_map_flush() run
atomically with respect to each other on the same CPU, relying on
local_bh_disable() to prevent preemption. However, on PREEMPT_RT,
local_bh_disable() only calls migrate_disable() (when
PREEMPT_RT_NEEDS_BH_LOCK is not set) and does not disable
preemption, which allows CFS scheduling to preempt a task during
bq_flush_to_queue(), enabling another task on the same CPU to enter
bq_enqueue() and operate on the same per-CPU bq concurrently.
This leads to several races:
1. Double __list_del_clearprev(): after bq->count is reset in
bq_flush_to_queue(), a preempting task can call bq_enqueue() ->
bq_flush_to_queue() on the same bq when bq->count reaches
CPU_MAP_BULK_SIZE. Both tasks then call __list_del_clearprev()
on the same bq->flush_node, the second call dereferences the
prev pointer that was already set to NULL by the first.
2. bq->count and bq->q[] races: concurrent bq_enqueue() can corrupt
the packet queue while bq_flush_to_queue() is processing it.
The race between task A (__cpu_map_flush -> bq_flush_to_queue) and
task B (bq_enqueue -> bq_flush_to_queue) on the same CPU:
Task A (xdp_do_flush) Task B (cpu_map_enqueue)
---------------------- ------------------------
bq_flush_to_queue(bq)
spin_lock(&q->producer_lock)
/* flush bq->q[] to ptr_ring */
bq->count = 0
spin_unlock(&q->producer_lock)
bq_enqueue(rcpu, xdpf)
<-- CFS preempts Task A --> bq->q[bq->count++] = xdpf
/* ... more enqueues until full ... */
bq_flush_to_queue(bq)
spin_lock(&q->producer_lock)
/* flush to ptr_ring */
spin_unlock(&q->producer_lock)
__list_del_clearprev(flush_node)
/* sets flush_node.prev = NULL */
<-- Task A resumes -->
__list_del_clearprev(flush_node)
flush_node.prev->next = ...
/* prev is NULL -> kernel oops */
Fix this by adding a local_lock_t to xdp_bulk_queue and acquiring it
in bq_enqueue() and __cpu_map_flush(). These paths already run under
local_bh_disable(), so use local_lock_nested_bh() which on non-RT is
a pure annotation with no overhead, and on PREEMPT_RT provides a
per-CPU sleeping lock that serializes access to the bq.
To reproduce, insert an mdelay(100) between bq->count = 0 and
__list_del_clearprev() in bq_flush_to_queue(), then run reproducer
provided by syzkaller.
Fixes:
|
||
|
Kumar Kartikeya Dwivedi
|
baa35b3cb6 |
bpf: Retire rcu_trace_implies_rcu_gp() from local storage
This assumption will always hold going forward, hence just remove the various checks and assume it is true with a comment for the uninformed reader. Reviewed-by: Paul E. McKenney <paulmck@kernel.org> Reviewed-by: Amery Hung <ameryhung@gmail.com> Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Link: https://lore.kernel.org/r/20260227224806.646888-5-memxor@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Kumar Kartikeya Dwivedi
|
f41deee082 |
bpf: Delay freeing fields in local storage
Currently, when use_kmalloc_nolock is false, the freeing of fields for a
local storage selem is done eagerly before waiting for the RCU or RCU
tasks trace grace period to elapse. This opens up a window where the
program which has access to the selem can recreate the fields after the
freeing of fields is done eagerly, causing memory leaks when the element
is finally freed and returned to the kernel.
Make a few changes to address this. First, delay the freeing of fields
until after the grace periods have expired using a __bpf_selem_free_rcu
wrapper which is eventually invoked after transitioning through the
necessary number of grace period waits. Replace usage of the kfree_rcu
with call_rcu to be able to take a custom callback. Finally, care needs
to be taken to extend the rcu barriers for all cases, and not just when
use_kmalloc_nolock is true, as RCU and RCU tasks trace callbacks can be
in flight for either case and access the smap field, which is used to
obtain the BTF record to walk over special fields in the map value.
While we're at it, drop migrate_disable() from bpf_selem_free_rcu, since
migration should be disabled for RCU callbacks already.
Fixes:
|
||
|
Kumar Kartikeya Dwivedi
|
ae51772b1e |
bpf: Lose const-ness of map in map_check_btf()
BPF hash map may now use the map_check_btf() callback to decide whether to set a dtor on its bpf_mem_alloc or not. Unlike C++ where members can opt out of const-ness using mutable, we must lose the const qualifier on the callback such that we can avoid the ugly cast. Make the change and adjust all existing users, and lose the comment in hashtab.c. Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Link: https://lore.kernel.org/r/20260227224806.646888-3-memxor@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Kumar Kartikeya Dwivedi
|
1df97a7453 |
bpf: Register dtor for freeing special fields
There is a race window where BPF hash map elements can leak special fields if the program with access to the map value recreates these special fields between the check_and_free_fields done on the map value and its eventual return to the memory allocator. Several ways were explored prior to this patch, most notably [0] tried to use a poison value to reject attempts to recreate special fields for map values that have been logically deleted but still accessible to BPF programs (either while sitting in the free list or when reused). While this approach works well for task work, timers, wq, etc., it is harder to apply the idea to kptrs, which have a similar race and failure mode. Instead, we change bpf_mem_alloc to allow registering destructor for allocated elements, such that when they are returned to the allocator, any special fields created while they were accessible to programs in the mean time will be freed. If these values get reused, we do not free the fields again before handing the element back. The special fields thus may remain initialized while the map value sits in a free list. When bpf_mem_alloc is retired in the future, a similar concept can be introduced to kmalloc_nolock-backed kmem_cache, paired with the existing idea of a constructor. Note that the destructor registration happens in map_check_btf, after the BTF record is populated and (at that point) avaiable for inspection and duplication. Duplication is necessary since the freeing of embedded bpf_mem_alloc can be decoupled from actual map lifetime due to logic introduced to reduce the cost of rcu_barrier()s in mem alloc free path in |
||
 Kohei Enju
|
b7bf516c3e |
bpf: Fix stack-out-of-bounds write in devmap
get_upper_ifindexes() iterates over all upper devices and writes their
indices into an array without checking bounds.
Also the callers assume that the max number of upper devices is
MAX_NEST_DEV and allocate excluded_devices[1+MAX_NEST_DEV] on the stack,
but that assumption is not correct and the number of upper devices could
be larger than MAX_NEST_DEV (e.g., many macvlans), causing a
stack-out-of-bounds write.
Add a max parameter to get_upper_ifindexes() to avoid the issue.
When there are too many upper devices, return -EOVERFLOW and abort the
redirect.
To reproduce, create more than MAX_NEST_DEV(8) macvlans on a device with
an XDP program attached using BPF_F_BROADCAST | BPF_F_EXCLUDE_INGRESS.
Then send a packet to the device to trigger the XDP redirect path.
Reported-by: syzbot+10cc7f13760b31bd2e61@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/698c4ce3.050a0220.340abe.000b.GAE@google.com/T/
Fixes:
|
||
 Kees Cook
|
189f164e57 |
Convert remaining multi-line kmalloc_obj/flex GFP_KERNEL uses
Conversion performed via this Coccinelle script:
// SPDX-License-Identifier: GPL-2.0-only
// Options: --include-headers-for-types --all-includes --include-headers --keep-comments
virtual patch
@gfp depends on patch && !(file in "tools") && !(file in "samples")@
identifier ALLOC = {kmalloc_obj,kmalloc_objs,kmalloc_flex,
kzalloc_obj,kzalloc_objs,kzalloc_flex,
kvmalloc_obj,kvmalloc_objs,kvmalloc_flex,
kvzalloc_obj,kvzalloc_objs,kvzalloc_flex};
@@
ALLOC(...
- , GFP_KERNEL
)
$ make coccicheck MODE=patch COCCI=gfp.cocci
Build and boot tested x86_64 with Fedora 42's GCC and Clang:
Linux version 6.19.0+ (user@host) (gcc (GCC) 15.2.1 20260123 (Red Hat 15.2.1-7), GNU ld version 2.44-12.fc42) #1 SMP PREEMPT_DYNAMIC 1970-01-01
Linux version 6.19.0+ (user@host) (clang version 20.1.8 (Fedora 20.1.8-4.fc42), LLD 20.1.8) #1 SMP PREEMPT_DYNAMIC 1970-01-01
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
Linus Torvalds
|
32a92f8c89 |
Convert more 'alloc_obj' cases to default GFP_KERNEL arguments
This converts some of the visually simpler cases that have been split over multiple lines. I only did the ones that are easy to verify the resulting diff by having just that final GFP_KERNEL argument on the next line. Somebody should probably do a proper coccinelle script for this, but for me the trivial script actually resulted in an assertion failure in the middle of the script. I probably had made it a bit _too_ trivial. So after fighting that far a while I decided to just do some of the syntactically simpler cases with variations of the previous 'sed' scripts. The more syntactically complex multi-line cases would mostly really want whitespace cleanup anyway. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Linus Torvalds
|
323bbfcf1e |
Convert 'alloc_flex' family to use the new default GFP_KERNEL argument
This is the exact same thing as the 'alloc_obj()' version, only much smaller because there are a lot fewer users of the *alloc_flex() interface. As with alloc_obj() version, this was done entirely with mindless brute force, using the same script, except using 'flex' in the pattern rather than 'objs*'. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Linus Torvalds
|
bf4afc53b7 |
Convert 'alloc_obj' family to use the new default GFP_KERNEL argument
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|