The SOF compressed offload path accepts codec parameters in
sof_compr_set_params() and forwards them to firmware as
extended data in the SOF IPC stream params message.
However, sof_compr_get_params() still returns success without
filling the snd_codec structure. Since the compress core allocates
that structure zeroed and copies it back to userspace on success,
SNDRV_COMPRESS_GET_PARAMS returns an all-zero codec description
even after the stream has been configured successfully.
The stale TODO in this callback conflates get_params() with capability
discovery. Supported codec enumeration belongs in get_caps() and
get_codec_caps(). get_params() should report the current codec settings.
Cache the codec accepted by sof_compr_set_params() in the per-stream SOF
compress state and return it from sof_compr_get_params().
Fixes: 6324cf901e ("ASoC: SOF: compr: Add compress ops implementation")
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Link: https://patch.msgid.link/20260325-sof-compr-get-params-v1-1-0758815f13c7@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 2458adb8f9 ("SoC: simple-card-utils: set 0Hz to sysclk when
shutdown") sends a 0Hz sysclk request during stream shutdown to clear
codec rate constraints. The rt5640 codec forwards this 0Hz to
clk_set_rate(), which can cause clock controller firmware faults on
platforms where MCLK is SoC-driven (e.g. Tegra) and 0Hz falls below
the hardware minimum rate.
Handle the 0Hz case by clearing the internal sysclk state and
returning early, avoiding the invalid clk_set_rate() call.
Signed-off-by: Sheetal <sheetal@nvidia.com>
Link: https://patch.msgid.link/20260406090547.988966-1-sheetal@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
aravindanilraj0702@gmail.com <aravindanilraj0702@gmail.com> says:
From: Aravind Anilraj <aravindanilraj0702@gmail.com>
This series fixes MCLK resource leaks in the platform_clock_control()
implementations for bytcr_rt5640, bytcr_rt5651, and cht_bsw_rt5672.
In the SND_SOC_DAPM_EVENT_ON() path, clk_prepare_enable() is called to
enable MCLK, but subsequent failures in codec clock configuration (eg:
*_prepare_and_enable_pll1() or snd_soc_dai_set_sysclk()) return without
disabling the clock, leaking a reference.
Patches 1-3 fix this by adding the missing clk_disable_unprepare() calls
in the relevant error paths, ensuring proper symmetry between enable and
disable operations within the EVENT_ON scope.
Patch 4 moves unrelated logging changes into a separate patch and
standardizes error messages.
Export the Q7.8 volume control helpers to allow reuse
by other ASoC drivers. These functions handle 16-bit
signed Q7.8 fixed-point format values for volume controls.
Changes include:
- Rename q78_get_volsw to sdca_asoc_q78_get_volsw
- Rename q78_put_volsw to sdca_asoc_q78_put_volsw
- Add a convenience macro SDCA_SINGLE_Q78_TLV and
SDCA_DOUBLE_Q78_TLV for creating mixer controls
This allows other ASoC drivers to easily implement controls
using the Q7.8 fixed-point format without duplicating code.
Signed-off-by: Niranjan H Y <niranjan.hy@ti.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260401132148.2367-1-niranjan.hy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
component_dais[RSND_MAX_COMPONENT] is initially zero-initialized
and later populated in rsnd_dai_of_node(). However, the existing boundary check:
if (i >= RSND_MAX_COMPONENT)
does not guarantee that the last valid element remains zero. As a result,
the loop can rely on component_dais[RSND_MAX_COMPONENT] being zero,
which may lead to an out-of-bounds access.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 547b02f74e ("ASoC: rsnd: enable multi Component support for Audio Graph Card/Card2")
Signed-off-by: Denis Rastyogin <gerben@altlinux.org>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/20260327103311.459239-1-gerben@altlinux.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com> says:
This patchset contains few fixes for the bugs hit during testing with
Monza EVK platform
- around array out of bounds access on dai ids which keep extending but
the drivers seems to have hardcoded some numbers, fix this and clean
the mess up
- fix few issues discovered while trying to shut down dsp.
- flooding rpmsg with write requests due to not resetting queue pointer,
fix this resetting the pointer in trigger stop.
- possible multiple graph opens which can result in open failures.
Apart from this few new enhancements to the dsp side
- add new LPI MI2S and senary dai entries
- handle pipewire and Displayport issues by moving graph start to
trigger level, which should fix outstanding pipewire and DP issues on
Qualcomm SoCs.
- remove some unnessary loops in hot path
- support early memory map on DSP.
Tested this on top of linux-next on VENTUNO-Q platform.
lpass ports numbers have been added but the afe/apm driver never got
updated with new max port value that it uses to store dai specific data.
There are more than one places these values are cached and always become
out of sync.
This will result in array out of bounds and weird driver behaviour.
To catch such issues, first add a single place where we can define max
port and second add a check in common parsing code which can error
out before corrupting the memory with out of bounds array access.
This should help both avoid and catch these type of mistakes in future.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20260402081118.348071-8-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Kuninori Morimoto
Cássio Gabriel
Ravi Hothi
Sheetal
Mark Brown
Aravind Anilraj
Chancel Liu
Niranjan H Y
Rosen Penev
Charles Keepax
Denis Rastyogin
Vijendar Mukunda
Maciej Strozek
Srinivas Kandagatla
Mohammad Rafi Shaik