Add a `TimerMode` associated type to the `HasHrTimer` trait to
represent the operational mode of the timer, such as absolute or
relative expiration. This new type must implement the `HrTimerMode`
trait, which defines how expiration values are interpreted.
Update the `start()` method to accept an `expires` parameter of type
`<Self::TimerMode as HrTimerMode>::Expires` instead of the fixed `Ktime`.
This enables different timer modes to provide strongly typed expiration
values, such as `Instant<C>` or `Delta`.
The `impl_has_hr_timer` macro is also extended to allow specifying the
`HrTimerMode`. In the following example, it guarantees that the
`start()` method for `Foo` only accepts `Instant<Monotonic>`. Using a
`Delta` or an `Instant` with a different clock source will result in a
compile-time error:
struct Foo {
#[pin]
timer: HrTimer<Self>,
}
impl_has_hr_timer! {
impl HasHrTimer<Self> for Foo {
mode : AbsoluteMode<Monotonic>,
field : self.timer
}
}
This design eliminates runtime mismatches between expires types and
clock sources, and enables stronger type-level guarantees throughout
hrtimer.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250610132823.3457263-5-fujita.tomonori@gmail.com
[ changed conversion method names to `as_*` - Andreas ]
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
Introduce the `HrTimerExpires` trait to represent types that can be
used as expiration values for high-resolution timers. Define a
required method, `into_nanos()`, which returns the expiration time as a
raw nanosecond value suitable for use with C's hrtimer APIs.
Also extend the `HrTimerMode` to use the `HrTimerExpires` trait.
This refactoring is a preparation for enabling hrtimer code to work
uniformly with both absolute and relative expiration modes.
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Link: https://lore.kernel.org/r/20250610132823.3457263-4-fujita.tomonori@gmail.com
[ changed conversion method names to `as_*` - Andreas ]
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
Replace the `HrTimerMode` enum with a trait-based approach that uses
zero-sized types to represent each mode of operation. Each mode now
implements the `HrTimerMode` trait.
This refactoring is a preparation for replacing raw `Ktime` in HrTimer
with the `Instant` and `Delta` types, and for making `HrTimer` generic
over a `ClockSource`.
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Link: https://lore.kernel.org/r/20250610132823.3457263-3-fujita.tomonori@gmail.com
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
Introduce the ktime_get() associated function to the ClockSource
trait, allowing each clock source to specify how it retrieves the
current time. This enables Instant::now() to be implemented
generically using the type-level ClockSource abstraction.
This change enhances the type safety and extensibility of timekeeping
by statically associating time retrieval mechanisms with their
respective clock types. It also reduces the reliance on hardcoded
clock logic within Instant.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Link: https://lore.kernel.org/r/20250610093258.3435874-4-fujita.tomonori@gmail.com
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
Refactor the Instant type to be generic over a ClockSource type
parameter, enabling static enforcement of clock correctness across
APIs that deal with time. Previously, the clock source was implicitly
fixed (typically CLOCK_MONOTONIC), and developers had to ensure
compatibility manually.
This design eliminates runtime mismatches between clock sources, and
enables stronger type-level guarantees throughout the timer subsystem.
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Link: https://lore.kernel.org/r/20250610093258.3435874-3-fujita.tomonori@gmail.com
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
Avoid 64-bit integer division that 32-bit architectures don't
implement generally. This uses ktime_to_us() and ktime_to_ms()
instead.
The time abstraction needs i64 / u32 division so C's div_s64() can be
used but ktime_to_us() and ktime_to_ms() provide a simpler solution
for this time abstraction problem on 32-bit architectures.
32-bit ARM is the only 32-bit architecture currently supported by
Rust. Using the cfg attribute, only 32-bit architectures will call
ktime_to_us() and ktime_to_ms(), while the other 64-bit architectures
will continue to use the current code as-is to avoid the overhead.
One downside of calling the C's functions is that the as_micros/millis
methods can no longer be const fn. We stick with the simpler approach
unless there's a compelling need for a const fn.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250502004524.230553-1-fujita.tomonori@gmail.com
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
Pull Kbuild fixes from Masahiro Yamada:
- Move warnings about linux/export.h from W=1 to W=2
- Fix structure type overrides in gendwarfksyms
* tag 'kbuild-fixes-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
gendwarfksyms: Fix structure type overrides
kbuild: move warnings about linux/export.h from W=1 to W=2
As we always iterate through the entire die_map when expanding
type strings, recursively processing referenced types in
type_expand_child() is not actually necessary. Furthermore,
the type_string kABI rule added in commit c9083467f7
("gendwarfksyms: Add a kABI rule to override type strings") can
fail to override type strings for structures due to a missing
kabi_get_type_string() check in this function.
Fix the issue by dropping the unnecessary recursion and moving
the override check to type_expand(). Note that symbol versions
are otherwise unchanged with this patch.
Fixes: c9083467f7 ("gendwarfksyms: Add a kABI rule to override type strings")
Reported-by: Giuliano Procida <gprocida@google.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Pull block fixes from Jens Axboe:
- Fix for a deadlock on queue freeze with zoned writes
- Fix for zoned append emulation
- Two bio folio fixes, for sparsemem and for very large folios
- Fix for a performance regression introduced in 6.13 when plug
insertion was changed
- Fix for NVMe passthrough handling for polled IO
- Document the ublk auto registration feature
- loop lockdep warning fix
* tag 'block-6.16-20250614' of git://git.kernel.dk/linux:
nvme: always punt polled uring_cmd end_io work to task_work
Documentation: ublk: Separate UBLK_F_AUTO_BUF_REG fallback behavior sublists
block: Fix bvec_set_folio() for very large folios
bio: Fix bio_first_folio() for SPARSEMEM without VMEMMAP
block: use plug request list tail for one-shot backmerge attempt
block: don't use submit_bio_noacct_nocheck in blk_zone_wplug_bio_work
block: Clear BIO_EMULATES_ZONE_APPEND flag on BIO completion
ublk: document auto buffer registration(UBLK_F_AUTO_BUF_REG)
loop: move lo_set_size() out of queue freeze
Pull io_uring fixes from Jens Axboe:
- Fix for a race between SQPOLL exit and fdinfo reading.
It's slim and I was only able to reproduce this with an artificial
delay in the kernel. Followup sparse fix as well to unify the access
to ->thread.
- Fix for multiple buffer peeking, avoiding truncation if possible.
- Run local task_work for IOPOLL reaping when the ring is exiting.
This currently isn't done due to an assumption that polled IO will
never need task_work, but a fix on the block side is going to change
that.
* tag 'io_uring-6.16-20250614' of git://git.kernel.dk/linux:
io_uring: run local task_work from ring exit IOPOLL reaping
io_uring/kbuf: don't truncate end buffer for multiple buffer peeks
io_uring: consistently use rcu semantics with sqpoll thread
io_uring: fix use-after-free of sq->thread in __io_uring_show_fdinfo()
Pull Rust fix from Miguel Ojeda:
- 'hrtimer': fix future compile error when the 'impl_has_hr_timer!'
macro starts to get called
* tag 'rust-fixes-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux:
rust: time: Fix compile error in impl_has_hr_timer macro
Pull misc fixes from Andrew Morton:
"9 hotfixes. 3 are cc:stable and the remainder address post-6.15 issues
or aren't considered necessary for -stable kernels. Only 4 are for MM"
* tag 'mm-hotfixes-stable-2025-06-13-21-56' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: add mmap_prepare() compatibility layer for nested file systems
init: fix build warnings about export.h
MAINTAINERS: add Barry as a THP reviewer
drivers/rapidio/rio_cm.c: prevent possible heap overwrite
mm: close theoretical race where stale TLB entries could linger
mm/vma: reset VMA iterator on commit_merge() OOM failure
docs: proc: update VmFlags documentation in smaps
scatterlist: fix extraneous '@'-sign kernel-doc notation
selftests/mm: skip failed memfd setups in gup_longterm
Pull SCSI fixes from James Bottomley:
"All fixes for drivers.
The core change in the error handler is simply to translate an ALUA
specific sense code into a retry the ALUA components can handle and
won't impact any other devices"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: error: alua: I/O errors for ALUA state transitions
scsi: storvsc: Increase the timeouts to storvsc_timeout
scsi: s390: zfcp: Ensure synchronous unit_add
scsi: iscsi: Fix incorrect error path labels for flashnode operations
scsi: mvsas: Fix typos in per-phy comments and SAS cmd port registers
scsi: core: ufs: Fix a hang in the error handler
Pull drm fixes from Dave Airlie:
"Quiet week, only two pull requests came my way, xe has a couple of
fixes and then a bunch of fixes across the board, vc4 probably fixes
the biggest problem:
vc4:
- Fix infinite EPROBE_DEFER loop in vc4 probing
amdxdna:
- Fix amdxdna firmware size
meson:
- modesetting fixes
sitronix:
- Kconfig fix for st7171-i2c
dma-buf:
- Fix -EBUSY WARN_ON_ONCE in dma-buf
udmabuf:
- Use dma_sync_sgtable_for_cpu in udmabuf
xe:
- Fix regression disallowing 64K SVM migration
- Use a bounce buffer for WA BB"
* tag 'drm-fixes-2025-06-14' of https://gitlab.freedesktop.org/drm/kernel:
drm/xe/lrc: Use a temporary buffer for WA BB
udmabuf: use sgtable-based scatterlist wrappers
dma-buf: fix compare in WARN_ON_ONCE
drm/sitronix: st7571-i2c: Select VIDEOMODE_HELPERS
drm/meson: fix more rounding issues with 59.94Hz modes
drm/meson: use vclk_freq instead of pixel_freq in debug print
drm/meson: fix debug log statement when setting the HDMI clocks
drm/vc4: fix infinite EPROBE_DEFER loop
drm/xe/svm: Fix regression disallowing 64K SVM migration
accel/amdxdna: Fix incorrect PSP firmware size
In preparation for needing to shift NVMe passthrough to always use
task_work for polled IO completions, ensure that those are suitably
run at exit time. See commit:
9ce6c9875f ("nvme: always punt polled uring_cmd end_io work to task_work")
for details on why that is necessary.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently NVMe uring_cmd completions will complete locally, if they are
polled. This is done because those completions are always invoked from
task context. And while that is true, there's no guarantee that it's
invoked under the right ring context, or even task. If someone does
NVMe passthrough via multiple threads and with a limited number of
poll queues, then ringA may find completions from ringB. For that case,
completing the request may not be sound.
Always just punt the passthrough completions via task_work, which will
redirect the completion, if needed.
Cc: stable@vger.kernel.org
Fixes: 585079b6e4 ("nvme: wire up async polling for io passthrough commands")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull ACPI fixes from Rafael Wysocki:
"These fix an ACPI APEI error injection driver failure that started to
occur after switching it over to using a faux device, address an EC
driver issue related to invalid ECDT tables, clean up the usage of
mwait_idle_with_hints() in the ACPI PAD driver, add a new IRQ override
quirk, and fix a NULL pointer dereference related to nosmp:
- Update the faux device handling code in the driver core and address
an ACPI APEI error injection driver failure that started to occur
after switching it over to using a faux device on top of that (Dan
Williams)
- Update data types of variables passed as arguments to
mwait_idle_with_hints() in the ACPI PAD (processor aggregator
device) driver to match the function definition after recent
changes (Uros Bizjak)
- Fix a NULL pointer dereference in the ACPI CPPC library that occurs
when nosmp is passed to the kernel in the command line (Yunhui Cui)
- Ignore ECDT tables with an invalid ID string to prevent using an
incorrect GPE for signaling events on some systems (Armin Wolf)
- Add a new IRQ override quirk for MACHENIKE 16P (Wentao Guan)"
* tag 'acpi-6.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: resource: Use IRQ override on MACHENIKE 16P
ACPI: EC: Ignore ECDT tables with an invalid ID string
ACPI: CPPC: Fix NULL pointer dereference when nosmp is used
ACPI: PAD: Update arguments of mwait_idle_with_hints()
ACPI: APEI: EINJ: Do not fail einj_init() on faux_device_create() failure
driver core: faux: Quiet probe failures
driver core: faux: Suppress bind attributes
FUJITA Tomonori
Linus Torvalds
Sami Tolvanen
Masahiro Yamada
Jens Axboe