of_gpio.h in this driver is solely used as a proxy to other headers.
This is incorrect usage of the of_gpio.h. Replace it .h with what
indeed is used in the code.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
of_gpio.h in this driver is solely used as a proxy to other headers.
This is incorrect usage of the of_gpio.h. Replace it .h with what
indeed is used in the code.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet says:
====================
net: better const qualifier awareness
This is a follow-up of d27d367d3b ("inet: better const qualifier awareness")
Adopting container_of_const() to perform (struct sock *)->(protocol sock *)
operation is allowing us to propagate const qualifier and thus detect
misuses at compile time.
Most conversions are trivial, because most protocols did not adopt yet
const sk pointers where it could make sense.
Only mptcp and tcp patches (end of this series) are requiring small
adjustments.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
We can change tcp_sk() to propagate its argument const qualifier,
thanks to container_of_const().
We have two places where a const sock pointer has to be upgraded
to a write one. We have been using const qualifier for lockless
listeners to clearly identify points where writes could happen.
Add tcp_sk_rw() helper to better document these.
tcp_inbound_md5_hash(), __tcp_grow_window(), tcp_reset_check()
and tcp_rack_reo_wnd() get an additional const qualififer
for their @tp local variables.
smc_check_reset_syn_req() also needs a similar change.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We can change mptcp_sk() to propagate its argument const qualifier,
thanks to container_of_const().
We need to change few things to avoid build errors:
mptcp_set_datafin_timeout() and mptcp_rtx_head() have to accept
non-const sk pointers.
@msk local variable in mptcp_pending_tail() must be const.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Matthieu Baerts <matthieu.baerts@tessares.net>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
We can change [a]x25_sk() to propagate their argument const qualifier,
thanks to container_of_const().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We can change unix_sk() to propagate its argument const qualifier,
thanks to container_of_const().
We need to change dump_common_audit_data() 'struct unix_sock *u'
local var to get a const attribute.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We can change dccp_sk() to propagate its argument const qualifier,
thanks to container_of_const().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We can change raw6_sk() to propagate its argument const qualifier,
thanks to container_of_const().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We can change raw_sk() to propagate const qualifier of its argument,
thanks to container_of_const()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We can change pkt_sk() to propagate const qualifier of its argument,
thanks to container_of_const()
This should avoid some potential errors caused by accidental
(const -> not_const) promotion.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We can change udp_sk() to propagate const qualifier of its argument,
thanks to container_of_const()
This should avoid some potential errors caused by accidental
(const -> not_const) promotion.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Gavin Li says:
====================
net/mlx5e: Add GBP VxLAN HW offload support
Patch-1: Remove unused argument from functions.
Patch-2: Expose helper function vxlan_build_gbp_hdr.
Patch-3: Add helper function for encap_info_equal for tunnels with options.
Patch-4: Preserving the const-ness of the pointer in ip_tunnel_info_opts.
Patch-5: Add HW offloading support for TC flows with VxLAN GBP encap/decap
in mlx ethernet driver.
====================
Link: https://lore.kernel.org/r/20230316070758.83512-1-gavinl@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Change ip_tunnel_info_opts( ) from static function to macro to cast return
value and preserve the const-ness of the pointer.
Signed-off-by: Gavin Li <gavinl@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For tunnels with options, eg, geneve and vxlan with gbp, they share the
same way to compare the headers and options. Extract the code as a common
function for them.
Signed-off-by: Gavin Li <gavinl@nvidia.com>
Reviewed-by: Gavi Teitz <gavi@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Acked-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove unused argument (i.e. u32 vxflags) in vxlan_build_gbp_hdr( ) and
vxlan_build_gpe_hdr( ) function arguments.
Signed-off-by: Gavin Li <gavinl@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
wwan_port_fops_write inputs the SKB parameter to the TX callback of
the WWAN device driver. However, the WWAN device (e.g., t7xx) may
have an MTU less than the size of SKB, causing the TX buffer to be
sliced and copied once more in the WWAN device driver.
This patch implements the slicing in the WWAN subsystem and gives
the WWAN devices driver the option to slice(by frag_len) or not. By
doing so, the additional memory copy is reduced.
Meanwhile, this patch gives WWAN devices driver the option to reserve
headroom in fragments for the device-specific metadata.
Signed-off-by: haozhe chang <haozhe.chang@mediatek.com>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Link: https://lore.kernel.org/r/20230316095826.181904-1-haozhe.chang@mediatek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Klaus Kudielka says:
====================
net: dsa: mv88e6xxx: accelerate C45 scan
Starting with commit 1a136ca2e0 ("net: mdio: scan bus based on bus
capabilities for C22 and C45"), mdiobus_scan_bus_c45() is being called on
buses with MDIOBUS_NO_CAP. On a Turris Omnia (Armada 385, 88E6176 switch),
this causes a significant increase of boot time, from 1.6 seconds, to 6.3
seconds. The boot time stated here is until start of /init.
Further testing revealed that the C45 scan is indeed expensive (around
2.7 seconds, due to a huge number of bus transactions), and called twice.
Two things were suggested:
(1) to move the expensive call of mv88e6xxx_mdios_register() from
mv88e6xxx_probe() to mv88e6xxx_setup().
(2) to mask apparently non-existing phys during probing.
Before that:
Patch #1 prepares the driver to handle the movement of
mv88e6xxx_mdios_register() to mv88e6xxx_setup() for cross-chip DSA trees.
Patch #2 is preparatory code movement, without functional change.
With those changes, boot time on the Turris Omnia is back to normal.
Link: https://lore.kernel.org/lkml/449bde236c08d5ab5e54abd73b645d8b29955894.camel@gmail.com/
====================
Link: https://lore.kernel.org/r/20230315163846.3114-1-klaus.kudielka@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To avoid excessive mdio bus transactions during probing, mask all phy
addresses that do not exist (there is a 1:1 mapping between switch port
number and phy address).
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Klaus Kudielka <klaus.kudielka@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Andy Shevchenko
Bartosz Wawrzyniak
David S. Miller
Eric Dumazet
Jakub Kicinski
Gavin Li
haozhe chang
Harini Katakam
Alex Elder
Klaus Kudielka