Currently, the driver uses phylib to operate PHY by default.
On some boards, the PHY device is separated from the MAC device.
As a result, the hibmcge driver cannot operate the PHY device.
In this patch, the driver determines whether a PHY is available
based on register configuration. If no PHY is available,
the driver will use fixed_phy to register fake phydev.
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Link: https://patch.msgid.link/20250702125716.2875169-2-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since its introduction in commit 6fa01ccd88 ("skbuff: Add pskb_extract()
helper function"), pskb_carve_frag_list() never used the argument @skb.
Drop it and adapt the only caller.
No functional change intended.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since its introduction in commit ce098da149 ("skbuff: Introduce
slab_build_skb()"), __slab_build_skb() never used the @skb argument. Remove
it and adapt both callers.
No functional change intended.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the newly added of_reserved_mem_region_to_resource{_byname}()
functions to handle "memory-region" properties.
The error handling is a bit different for mtk_wed_mcu_load_firmware().
A failed match of the "memory-region-names" would skip the entry, but
then other errors in the lookup and retrieval of the address would not
skip the entry. However, that distinction is not really important.
Either the region is available and usable or it is not. So now, errors
from of_reserved_mem_region_to_resource() are ignored so the region is
simply skipped.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250703183459.2074381-1-robh@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tc_action_net_exit() got an rtnl exclusion in commit
a159d3c4b8 ("net_sched: acquire RTNL in tc_action_net_exit()")
Since then, commit 16af606739 ("net: sched: implement reference
counted action release") made this RTNL exclusion obsolete for
most cases.
Only tcf_action_offload_del() might still require it.
Move the rtnl locking into tcf_idrinfo_destroy() when
an offload action is found.
Most netns do not have actions, yet deleting them is adding a lot
of pressure on RTNL, which is for many the most contended mutex
in the kernel.
We are moving to a per-netns 'rtnl', so tc_action_net_exit()
will not be able to grab 'rtnl' a single time for a batch of netns.
Before the patch:
perf probe -a rtnl_lock
perf record -e probe:rtnl_lock -a /bin/bash -c 'unshare -n "/bin/true"; sleep 1'
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.305 MB perf.data (25 samples) ]
After the patch:
perf record -e probe:rtnl_lock -a /bin/bash -c 'unshare -n "/bin/true"; sleep 1'
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.304 MB perf.data (9 samples) ]
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Vlad Buslov <vladbu@nvidia.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Link: https://patch.msgid.link/20250702071230.1892674-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jeremy Kerr says:
====================
net: mctp: Add support for gateway routing
This series adds a gateway route type for the MCTP core, allowing
non-local EIDs as the match for a route.
Example setup using the mctp tools:
mctp route add 9 via mctpi2c0
mctp neigh add 9 dev mctpi2c0 lladdr 0x1d
mctp route add 10 gw 9
- will route packets to eid 10 through mctpi2c0, using a dest lladdr
of 0x1d (ie, that of the directly-attached eid 9).
The core change to support this is the introduction of a struct
mctp_dst, which represents the result of a route lookup. Since this
involves a bit of surgery through the routing code, we add a few tests
along the way.
We're introducing an ABI change in the new RTM_{NEW,GET,DEL}ROUTE
netlink formats, with the support for a RTA_GATEWAY attribute. Because
we need a network ID specified to fully-qualify a gateway EID, the
RTA_GATEWAY attribute carries the (net, eid) tuple in full:
struct mctp_fq_addr {
unsigned int net;
mctp_eid_t eid;
}
Of course, any questions, comments etc are most welcome.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
====================
Link: https://patch.msgid.link/20250702-dev-forwarding-v5-0-1468191da8a4@codeconstruct.com.au
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This change allows for gateway routing, where a route table entry
may reference a routable endpoint (by network and EID), instead of
routing directly to a netdevice.
We add support for a RTM_GATEWAY attribute for netlink route updates,
with an attribute format of:
struct mctp_fq_addr {
unsigned int net;
mctp_eid_t eid;
}
- we need the net here to uniquely identify the target EID, as we no
longer have the device reference directly (which would provide the net
id in the case of direct routes).
This makes route lookups recursive, as a route lookup that returns a
gateway route must be resolved into a direct route (ie, to a device)
eventually. We provide a limit to the route lookups, to prevent infinite
loop routing.
The route lookup populates a new 'nexthop' field in the dst structure,
which now specifies the key for the neighbour table lookup on device
output, rather than using the packet destination address directly.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Link: https://patch.msgid.link/20250702-dev-forwarding-v5-13-1468191da8a4@codeconstruct.com.au
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The netlink route parsing functions end up setting a bunch of output
variables from the rt attributes. This will get messy when the routes
become more complex.
So, split the rt parsing into two types: a lookup (returning route
target data suitable for a route lookup, like when deleting a route) and
a populate (setting fields of a struct mctp_route).
In doing this, we need to separate the route allocation from
mctp_route_add, so add some comments on the lifetime semantics for the
latter.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Link: https://patch.msgid.link/20250702-dev-forwarding-v5-12-1468191da8a4@codeconstruct.com.au
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jakub Kicinski
Jijie Shao
Faisal Bukhari
Michal Luczaj
Rob Herring (Arm)
Ahelenia Ziemiańska
Colin Ian King
Hannes Reinecke
Wang Liang
Eric Dumazet
Paolo Abeni
Jeremy Kerr