This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
The divider_round_rate() function is now deprecated, so let's migrate
to divider_determine_rate() instead so that this deprecated API can be
removed.
Note that when the main function itself was migrated to use
determine_rate, this was mistakenly converted to:
req->rate = divider_round_rate(...)
This is invalid in the case when an error occurs since it can set the
rate to a negative value.
Fixes: 27287e3b52 ("phy: ti: phy-j721e-wiz: convert from round_rate() to determine_rate()")
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://patch.msgid.link/20260108-clk-divider-round-rate-v1-25-535a3ed73bf3@redhat.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The driver start registering a regulator, but can still be
enabled even when it is unable to call into the regulator
subsystem:
aarch64-linux-ld: drivers/phy/renesas/phy-rcar-gen3-usb2.o: in function `rcar_gen3_phy_usb2_probe':
phy-rcar-gen3-usb2.c:(.text+0x2884): undefined reference to `devm_regulator_register'
Add a Kconfig dependency to avoid this configuration.
Fixes: b6d7dd1577 ("phy: renesas: rcar-gen3-usb2: Add regulator for OTG VBUS control")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Link: https://patch.msgid.link/20260202095118.1233046-1-arnd@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
With CONFIG_TYPEC=m, this driver cannot be built-in:
arm-linux-gnueabi/bin/arm-linux-gnueabi-ld: drivers/phy/phy-google-usb.o: in function `google_usb_phy_remove':
phy-google-usb.c:(.text+0x24): undefined reference to `typec_switch_unregister'
Add CONFIG_TYPEC as a hard dependency here to force a clean build.
In theory, compile-testing with CONFIG_TYPEC=n would also work, but
that seems pointless.
Fixes: cbce66669c ("phy: Add Google Tensor SoC USB PHY driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260202095655.1289973-1-arnd@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
In order to facilitate introduction of HDMI 2.1 FRL support and to avoid
recomputing the link rate after verifying the HDMI configuration given
as input, extend rk_hdptx_phy_verify_hdmi_config() by providing an
optional output parameter to store the validated configuration.
For improved code readability, also rename the existing hdmi input
parameter.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patch.msgid.link/20260113-phy-hdptx-frl-v6-10-8d5f97419c0b@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
In preparation to support the FRL operation mode which gets configured
via the lanes and rate per lane tuple, switch to a driver specific
struct for configuring the link rate and bpc.
This simplifies and optimizes the implementation by allowing implicit
switches between TMDS and FRL rates, without requiring additional checks
of the active PHY mode followed by recalculations of the link rate when
operating in FRL mode.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patch.msgid.link/20260113-phy-hdptx-frl-v6-9-8d5f97419c0b@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The ->hw_rate member of struct rk_hdptx_phy was mainly used to keep
track of the clock rate programmed in hardware and support implementing
the ->recalc_rate() callback in hdptx_phy_clk_ops.
Computing the clock rate from the actual PHY PLL configuration seems to
work reliably, hence remove the now redundant struct member.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patch.msgid.link/20260113-phy-hdptx-frl-v6-8-8d5f97419c0b@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Drop redundant reg_sequence entries from rk_hdptx_common_cmn_init_seq[],
i.e. those that are either duplicated or overridden in
rk_hdptx_tmds_cmn_init_seq[].
Additionally, a few items do not really belong to the former, hence move
them to the latter. That's mostly a preparatory step for adding FRL
support.
No functional changes intended at this point.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patch.msgid.link/20260113-phy-hdptx-frl-v6-6-8d5f97419c0b@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The problem with the current implementation is that it does not consider
that the USB controller can have multiple PHY handles with different
arguments count, as for example we have in our cn9131 based platform:
"phys = <&cp0_comphy1 0>, <&cp0_utmi0>;".
In such case calling "of_usb_get_dr_mode_by_phy" with -1 (no phy-cells)
leads to not proper phy detection, taking the "marvell,cp110-utmi-phy"
dts definition we can call the "of_usb_get_dr_mode_by_phy" with 0
(#phy-cells = <0>) and safely look for that phy.
Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@belden.com>
Link: https://patch.msgid.link/20260106150643.922110-1-aleksandar.gerasimovski@belden.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Linus Torvalds
Kees Cook
Brian Masney
Jon Hunter
Arnd Bergmann
Vladimir Oltean
Jakub Kicinski
Tommaso Merciai
Cristian Ciocaltea
Thomas Richard
Aleksandar Gerasimovski