One handler, one entry registered disabled, an interpreter per guest
architecture bound to a file one write at a time. The load program picks
one by name per exec:
- an aarch64 binary runs the interpreter bound as "first" and a riscv one
the interpreter bound as "second", from a single entry and a single
handler
- unlinking a bound interpreter and putting a different binary in its
place changes nothing, which is what the binding exists for
- the entry reports what it bound, under the names it bound them as
- a name the entry did not bind fails the exec with -ENOENT rather than
falling back to anything
- activating the entry refuses further binding with -EBUSY, a later
disable does not undo that, and an entry registered without 'D' never
accepted a '+' write to begin with
- a name binds one interpreter, and control characters are refused
- the command has to end at the write, bytes past an embedded nul are
refused
- an entry binds at most 100 interpreters, the next one is refused with
-ENOSPC
The test interpreter prints its argv[0], which is the path the kernel ran
that copy under, so one binary installed at two paths tells the harness
which of them the program picked.
Link: https://patch.msgid.link/20260730-work-binfmt_misc-preopen-v1-8-4a0b0da71f16@kernel.org
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
A magic entry registered with 'D' and the same entry without it, to pin
down what the flag decides and what it leaves alone:
- the entry reports itself disabled and nothing dispatches until '1' is
written to it
- without 'D' it dispatches straight away
- 'D' is not read back among the entry's flags
- enabling and disabling afterwards works as it does for any entry
- 'D' composes with the flags that shape the invocation
- '-1' to the status file removes a staged entry like any other
- a file handle held across a removal cannot resurrect the entry
Put the entry write and read-back helpers into binfmt_misc_common.h.
The bpf suite will need them as well.
Link: https://patch.msgid.link/20260730-work-binfmt_misc-preopen-v1-3-4a0b0da71f16@kernel.org
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
binfmt_flag_supported() returns 0 when the flag is supported and -1
when it is not, so every caller reads backwards:
if (binfmt_flag_supported('T'))
SKIP(return, "kernel without the 'T' flag");
Make it return a bool and flip the callers. errno from a failed probe
is still set for callers that check it.
Link: https://patch.msgid.link/20260730-work-binfmt_misc-preopen-v1-2-4a0b0da71f16@kernel.org
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
An 'F' entry whose interpreter keeps the binfmt_misc superblock alive
pins the instance that owns it forever. Cover both ways to build that:
- an interpreter on the instance's own files, control file and entry
file alike
- and an instance used as an overlayfs lower layer.
Check that an ordinary 'F' registration still succeeds so the fix stays
honest about not changing what 'F' promises.
Link: https://patch.msgid.link/20260728-work-binfmt_misc-selfpin-v1-2-74df5daeca5b@kernel.org
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
Exercise the 'L' flag end to end. The payload runs as the main image
with a copy of the system loader substituted for its PT_INTERP, and
asserts the native identity from inside:
- argv exactly as the caller built it
- no AT_EXECFD
- AT_FLAGS clear
- AT_BASE set but outside its own image
- AT_PHDR/AT_ENTRY inside it
- /proc/self/{exe,comm,stat} and AT_EXECFN all describing the binary
- ETXTBSY on the running binary
- the substituted loader visible in /proc/self/maps under its real path
Magic matching pokes a marker into the ELF header's e_ident padding
(EI_PAD, offset 9), which sits inside the match window and is ignored by
kernel and loader alike. the same binary is also matched by extension.
Two cases cover the paths where the substitution does not happen. A '#!'
file that matched an 'L' entry is claimed by binfmt_script rather than by
binfmt_elf, so the staged substitute has to be released when the
interpreter replaces the file; the test opens the loader for writing
afterwards, which fails with ETXTBSY if the write denial was leaked
instead. A relative interpreter path is rejected at registration for both
'L' and 'C', neither of which may resolve one against the working
directory of whoever runs the binary.
The bpf-side BPF_BINPRM_LOADER path shares all machinery past the flag
mapping. A harness case for it can join the bpf runtime coverage of
the transparent series.
Link: https://patch.msgid.link/20260721-work-bpf-binfmt_misc-ptinterp-v2-20-e57866e4ae0f@kernel.org
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
Verify the identity a transparent dispatch constructs, from both
activation paths.
- binfmt_misc_transparent: registers a magic entry with the static 'T'
flag and execs a matched binary with arguments.
- binfmt_misc_bpf: a handler whose load program sets
BPF_BINPRM_TRANSPARENT.
Both dispatch to a shared asserting interpreter that runs in place of
the binary and checks the contract from the inside:
- AT_FLAGS carries AT_FLAGS_TRANSPARENT_INTERP
- AT_EXECFD refers to the very inode of the binary
- /proc/self/exe resolves to the binary
- argv and /proc/self/cmdline are exactly what the caller passed with
nothing spliced in
- comm is the binary's basename
- the binary is write-denied while it runs
The static test also validates the registration. 'T' combined with 'P'
must be rejected. A kernel that does not know 'T' turns the test into a
skip. The asserting interpreter and the static test build without the
bpf toolchain so the core transparent semantics stay covered on systems
where the bpf cases are skipped.
The flag support probe, the canonical payload argv with the
run_payload() helper that execs it, and the identity assertions (exe
link, comm, write denial) live in binfmt_misc_common.h; the loader
substitution test reuses all of them.
Link: https://patch.msgid.link/20260721-work-bpf-binfmt_misc-ptinterp-v2-13-e57866e4ae0f@kernel.org
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
The test reports its own pass and fail lines, returns a bare 4 for
KSFT_SKIP and runs both cases in one process, so a failure in the first
takes the second with it. It also open-codes the register, unregister,
file-copy and mount helpers that the tests for the upcoming transparent
and loader dispatch modes need again.
Convert it to the kselftest harness: a fixture for the common setup and
teardown, one TEST_F per case so each is reported and isolated
separately, and SKIP() for the root, BTF and binfmt_misc preconditions.
Move the helpers to a shared header on the way, with the register
helper preserving the write's errno so a caller can tell a rejected
flag combination (EINVAL) from a kernel that does not know the flag at
all. The synthetic ELF header gains an e_machine argument and uses the
elf.h constants instead of open-coded numbers.
The fixture no longer mounts bpffs. The handler is attached with
bpf_map__attach_struct_ops() and nothing is ever pinned, the mount was
carried along from a bpftool-based draft. The bpf objects are compiled
with -DBPF_NO_KFUNC_PROTOTYPES - the guard bpftool emits for exactly
this - instead of sed'ing the prototypes out of the generated
vmlinux.h. And the config fragment records the options the binfmt_misc
tests need so a merge-config kernel can run them.
No change in what is tested.
Link: https://patch.msgid.link/20260721-work-bpf-binfmt_misc-ptinterp-v2-7-e57866e4ae0f@kernel.org
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
Exercise the bpf-backed ('B') binfmt_misc handlers end to end. A handler
is a struct binfmt_misc_ops struct_ops map; the test loads and attaches
it (which publishes it by name), activates it with a 'B' entry, and
checks that a matched binary is routed to the interpreter the program
selected via bpf_binprm_set_interp().
Two self-contained cases are covered:
- bpf_interp: the match program matches a synthetic aarch64 ELF header
from the prefetched bprm->buf and the load program routes it to a
fixed interpreter of its choosing.
- nix_origin: the match program parses the program headers to commit
only to a "$ORIGIN/..."-relative PT_INTERP and the load program
resolves it to an interpreter co-located with the binary -- the
relocatable-loader case the kernel ELF loader cannot express. The
relocatable binary is linked with PT_INTERP set to the literal
"$ORIGIN/binfmt_bpf_interp" (-Wl,--dynamic-linker), which the kernel
cannot resolve on its own.
Both route to a small test interpreter that prints a marker, proving the
program-selected interpreter actually ran.
The bpf objects are compiled against the running kernel's BTF: the
Makefile generates vmlinux.h with bpftool and the harness links libbpf.
Override CLANG/BPFTOOL/VMLINUX_BTF/LIBBPF_CFLAGS/LIBBPF_LDLIBS as needed.
The bpf pieces are only built when clang, bpftool, the vmlinux BTF and
libbpf are all present (HAVE_BPF_TOOLCHAIN=y forces them) so the other
exec selftests keep building without a bpf toolchain.
Christian Brauner (Amutable) <brauner@kernel.org> says:
Adapted to the two-op contract: 'B' entries carry the handler name in
the interpreter field, both programs are sleepable, the match programs
decide. nix_origin reads PT_INTERP from the match program and load
returns zero on success. Skip on kernels without binfmt_misc_ops in BTF.
Build the bpf pieces only when the toolchain is present and gitignore
the generated artifacts.
Signed-off-by: Farid Zakaria <farid.m.zakaria@gmail.com>
Link: https://patch.msgid.link/20260714-work-bpf-binfmt_misc-v2-9-57b7529c002c@kernel.org
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
Pull AT_EXECVE_CHECK selftest fix from Kees Cook:
"Fixes the AT_EXECVE_CHECK selftests which didn't run on old versions
of glibc"
* tag 'AT_EXECVE_CHECK-v6.14-rc1-fix1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
selftests: Handle old glibc without execveat(2)
Pull AT_EXECVE_CHECK from Kees Cook:
- Implement AT_EXECVE_CHECK flag to execveat(2) (Mickaël Salaün)
- Implement EXEC_RESTRICT_FILE and EXEC_DENY_INTERACTIVE securebits
(Mickaël Salaün)
- Add selftests and samples for AT_EXECVE_CHECK (Mickaël Salaün)
* tag 'AT_EXECVE_CHECK-v6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
ima: instantiate the bprm_creds_for_exec() hook
samples/check-exec: Add an enlighten "inc" interpreter and 28 tests
selftests: ktap_helpers: Fix uninitialized variable
samples/check-exec: Add set-exec
selftests/landlock: Add tests for execveat + AT_EXECVE_CHECK
selftests/exec: Add 32 tests for AT_EXECVE_CHECK and exec securebits
security: Add EXEC_RESTRICT_FILE and EXEC_DENY_INTERACTIVE securebits
exec: Add a new AT_EXECVE_CHECK flag to execveat(2)
Add a very simple script interpreter called "inc" that can evaluate two
different commands (one per line):
- "?" to initialize a counter from user's input;
- "+" to increment the counter (which is set to 0 by default).
It is enlighten to only interpret executable files according to
AT_EXECVE_CHECK and the related securebits:
# Executing a script with RESTRICT_FILE is only allowed if the script
# is executable:
./set-exec -f -- ./inc script-exec.inc # Allowed
./set-exec -f -- ./inc script-noexec.inc # Denied
# Executing stdin with DENY_INTERACTIVE is only allowed if stdin is an
# executable regular file:
./set-exec -i -- ./inc -i < script-exec.inc # Allowed
./set-exec -i -- ./inc -i < script-noexec.inc # Denied
# However, a pipe is not executable and it is then denied:
cat script-noexec.inc | ./set-exec -i -- ./inc -i # Denied
# Executing raw data (e.g. command argument) with DENY_INTERACTIVE is
# always denied.
./set-exec -i -- ./inc -c "+" # Denied
./inc -c "$(<script-ask.inc)" # Allowed
# To directly execute a script, we can update $PATH (used by `env`):
PATH="${PATH}:." ./script-exec.inc
# To execute several commands passed as argument:
Add a complete test suite to check the script interpreter against all
possible execution cases:
make TARGETS=exec kselftest-install
./tools/testing/selftests/kselftest_install/run_kselftest.sh
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Link: https://lore.kernel.org/r/20241212174223.389435-8-mic@digikod.net
Signed-off-by: Kees Cook <kees@kernel.org>
In the previous patch we've updated AT_EMPTY_PATH execs to use the dentry
filename. Test for this and just to be sure keeps working with symlinks,
which was a concern in [1], I've added a test for that as well.
The test itself is a bit ugly, because the existing check_execveat_fail()
helpers use a hardcoded envp and argv, and we want to "pass" things via the
environment to test various argument values, but it seemed cleaner than
passing one in everywhere in all the existing tests.
Output looks like:
ok 51 Check success of execveat(6, 'home/tycho/packages/...yyyyyyyyyyyyyyyyyyyy', 0)...
# Check execveat(AT_EMPTY_PATH)'s comm is execveat
ok 52 Check success of execveat(9, '', 4096)...
# Check execveat(AT_EMPTY_PATH)'s comm is execveat
ok 53 Check success of execveat(11, '', 4096)...
# Check execveat(AT_EMPTY_PATH)'s comm is execveat
[ 25.579272] process 'execveat' launched '/dev/fd/9' with NULL argv: empty string added
ok 54 Check success of execveat(9, '', 4096)...
Link: https://lore.kernel.org/all/20240925.152228-private.conflict.frozen.trios-TdUGhuI5Sb4v@cyphar.com/ [1]
Signed-off-by: Tycho Andersen <tandersen@netflix.com>
Link: https://lore.kernel.org/r/20241030203732.248767-2-tycho@tycho.pizza
Signed-off-by: Kees Cook <kees@kernel.org>
The name of the "load_address" objects has been modified, but the
corresponding entry in the gitignore file must be updated.
Update the load_address entry in the gitignore file to account for
the new names, adding an exception to keep on tracking load_address.c.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Pull MM updates from Andrew Morton:
- In the series "mm: Avoid possible overflows in dirty throttling" Jan
Kara addresses a couple of issues in the writeback throttling code.
These fixes are also targetted at -stable kernels.
- Ryusuke Konishi's series "nilfs2: fix potential issues related to
reserved inodes" does that. This should actually be in the
mm-nonmm-stable tree, along with the many other nilfs2 patches. My
bad.
- More folio conversions from Kefeng Wang in the series "mm: convert to
folio_alloc_mpol()"
- Kemeng Shi has sent some cleanups to the writeback code in the series
"Add helper functions to remove repeated code and improve readability
of cgroup writeback"
- Kairui Song has made the swap code a little smaller and a little
faster in the series "mm/swap: clean up and optimize swap cache
index".
- In the series "mm/memory: cleanly support zeropage in
vm_insert_page*(), vm_map_pages*() and vmf_insert_mixed()" David
Hildenbrand has reworked the rather sketchy handling of the use of
the zeropage in MAP_SHARED mappings. I don't see any runtime effects
here - more a cleanup/understandability/maintainablity thing.
- Dev Jain has improved selftests/mm/va_high_addr_switch.c's handling
of higher addresses, for aarch64. The (poorly named) series is
"Restructure va_high_addr_switch".
- The core TLB handling code gets some cleanups and possible slight
optimizations in Bang Li's series "Add update_mmu_tlb_range() to
simplify code".
- Jane Chu has improved the handling of our
fake-an-unrecoverable-memory-error testing feature MADV_HWPOISON in
the series "Enhance soft hwpoison handling and injection".
- Jeff Johnson has sent a billion patches everywhere to add
MODULE_DESCRIPTION() to everything. Some landed in this pull.
- In the series "mm: cleanup MIGRATE_SYNC_NO_COPY mode", Kefeng Wang
has simplified migration's use of hardware-offload memory copying.
- Yosry Ahmed performs more folio API conversions in his series "mm:
zswap: trivial folio conversions".
- In the series "large folios swap-in: handle refault cases first",
Chuanhua Han inches us forward in the handling of large pages in the
swap code. This is a cleanup and optimization, working toward the end
objective of full support of large folio swapin/out.
- In the series "mm,swap: cleanup VMA based swap readahead window
calculation", Huang Ying has contributed some cleanups and a possible
fixlet to his VMA based swap readahead code.
- In the series "add mTHP support for anonymous shmem" Baolin Wang has
taught anonymous shmem mappings to use multisize THP. By default this
is a no-op - users must opt in vis sysfs controls. Dramatic
improvements in pagefault latency are realized.
- David Hildenbrand has some cleanups to our remaining use of
page_mapcount() in the series "fs/proc: move page_mapcount() to
fs/proc/internal.h".
- David also has some highmem accounting cleanups in the series
"mm/highmem: don't track highmem pages manually".
- Build-time fixes and cleanups from John Hubbard in the series
"cleanups, fixes, and progress towards avoiding "make headers"".
- Cleanups and consolidation of the core pagemap handling from Barry
Song in the series "mm: introduce pmd|pte_needs_soft_dirty_wp helpers
and utilize them".
- Lance Yang's series "Reclaim lazyfree THP without splitting" has
reduced the latency of the reclaim of pmd-mapped THPs under fairly
common circumstances. A 10x speedup is seen in a microbenchmark.
It does this by punting to aother CPU but I guess that's a win unless
all CPUs are pegged.
- hugetlb_cgroup cleanups from Xiu Jianfeng in the series
"mm/hugetlb_cgroup: rework on cftypes".
- Miaohe Lin's series "Some cleanups for memory-failure" does just that
thing.
- Someone other than SeongJae has developed a DAMON feature in Honggyu
Kim's series "DAMON based tiered memory management for CXL memory".
This adds DAMON features which may be used to help determine the
efficiency of our placement of CXL/PCIe attached DRAM.
- DAMON user API centralization and simplificatio work in SeongJae
Park's series "mm/damon: introduce DAMON parameters online commit
function".
- In the series "mm: page_type, zsmalloc and page_mapcount_reset()"
David Hildenbrand does some maintenance work on zsmalloc - partially
modernizing its use of pageframe fields.
- Kefeng Wang provides more folio conversions in the series "mm: remove
page_maybe_dma_pinned() and page_mkclean()".
- More cleanup from David Hildenbrand, this time in the series
"mm/memory_hotplug: use PageOffline() instead of PageReserved() for
!ZONE_DEVICE". It "enlightens memory hotplug more about PageOffline()
pages" and permits the removal of some virtio-mem hacks.
- Barry Song's series "mm: clarify folio_add_new_anon_rmap() and
__folio_add_anon_rmap()" is a cleanup to the anon folio handling in
preparation for mTHP (multisize THP) swapin.
- Kefeng Wang's series "mm: improve clear and copy user folio"
implements more folio conversions, this time in the area of large
folio userspace copying.
- The series "Docs/mm/damon/maintaier-profile: document a mailing tool
and community meetup series" tells people how to get better involved
with other DAMON developers. From SeongJae Park.
- A large series ("kmsan: Enable on s390") from Ilya Leoshkevich does
that.
- David Hildenbrand sends along more cleanups, this time against the
migration code. The series is "mm/migrate: move NUMA hinting fault
folio isolation + checks under PTL".
- Jan Kara has found quite a lot of strangenesses and minor errors in
the readahead code. He addresses this in the series "mm: Fix various
readahead quirks".
- SeongJae Park's series "selftests/damon: test DAMOS tried regions and
{min,max}_nr_regions" adds features and addresses errors in DAMON's
self testing code.
- Gavin Shan has found a userspace-triggerable WARN in the pagecache
code. The series "mm/filemap: Limit page cache size to that supported
by xarray" addresses this. The series is marked cc:stable.
- Chengming Zhou's series "mm/ksm: cmp_and_merge_page() optimizations
and cleanup" cleans up and slightly optimizes KSM.
- Roman Gushchin has separated the memcg-v1 and memcg-v2 code - lots of
code motion. The series (which also makes the memcg-v1 code
Kconfigurable) are "mm: memcg: separate legacy cgroup v1 code and put
under config option" and "mm: memcg: put cgroup v1-specific memcg
data under CONFIG_MEMCG_V1"
- Dan Schatzberg's series "Add swappiness argument to memory.reclaim"
adds an additional feature to this cgroup-v2 control file.
- The series "Userspace controls soft-offline pages" from Jiaqi Yan
permits userspace to stop the kernel's automatic treatment of
excessive correctable memory errors. In order to permit userspace to
monitor and handle this situation.
- Kefeng Wang's series "mm: migrate: support poison recover from
migrate folio" teaches the kernel to appropriately handle migration
from poisoned source folios rather than simply panicing.
- SeongJae Park's series "Docs/damon: minor fixups and improvements"
does those things.
- In the series "mm/zsmalloc: change back to per-size_class lock"
Chengming Zhou improves zsmalloc's scalability and memory
utilization.
- Vivek Kasireddy's series "mm/gup: Introduce memfd_pin_folios() for
pinning memfd folios" makes the GUP code use FOLL_PIN rather than
bare refcount increments. So these paes can first be moved aside if
they reside in the movable zone or a CMA block.
- Andrii Nakryiko has added a binary ioctl()-based API to
/proc/pid/maps for much faster reading of vma information. The series
is "query VMAs from /proc/<pid>/maps".
- In the series "mm: introduce per-order mTHP split counters" Lance
Yang improves the kernel's presentation of developer information
related to multisize THP splitting.
- Michael Ellerman has developed the series "Reimplement huge pages
without hugepd on powerpc (8xx, e500, book3s/64)". This permits
userspace to use all available huge page sizes.
- In the series "revert unconditional slab and page allocator fault
injection calls" Vlastimil Babka removes a performance-affecting and
not very useful feature from slab fault injection.
* tag 'mm-stable-2024-07-21-14-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (411 commits)
mm/mglru: fix ineffective protection calculation
mm/zswap: fix a white space issue
mm/hugetlb: fix kernel NULL pointer dereference when migrating hugetlb folio
mm/hugetlb: fix possible recursive locking detected warning
mm/gup: clear the LRU flag of a page before adding to LRU batch
mm/numa_balancing: teach mpol_to_str about the balancing mode
mm: memcg1: convert charge move flags to unsigned long long
alloc_tag: fix page_ext_get/page_ext_put sequence during page splitting
lib: reuse page_ext_data() to obtain codetag_ref
lib: add missing newline character in the warning message
mm/mglru: fix overshooting shrinker memory
mm/mglru: fix div-by-zero in vmpressure_calc_level()
mm/kmemleak: replace strncpy() with strscpy()
mm, page_alloc: put should_fail_alloc_page() back behing CONFIG_FAIL_PAGE_ALLOC
mm, slab: put should_failslab() back behind CONFIG_SHOULD_FAILSLAB
mm: ignore data-race in __swap_writepage
hugetlbfs: ensure generic_hugetlb_get_unmapped_area() returns higher address than mmap_min_addr
mm: shmem: rename mTHP shmem counters
mm: swap_state: use folio_alloc_mpol() in __read_swap_cache_async()
mm/migrate: putback split folios when numa hint migration fails
...
The p_align values in PT_LOAD were ignored for static PIE executables
(i.e. ET_DYN without PT_INTERP). This is because there is no way to
request a non-fixed mmap region with a specific alignment. ET_DYN with
PT_INTERP uses a separate base address (ELF_ET_DYN_BASE) and binfmt_elf
performs the ASLR itself, which means it can also apply alignment. For
the mmap region, the address selection happens deep within the vm_mmap()
implementation (when the requested address is 0).
The earlier attempt to implement this:
commit 9630f0d60f ("fs/binfmt_elf: use PT_LOAD p_align values for static PIE")
commit 925346c129 ("fs/binfmt_elf: fix PT_LOAD p_align values for loaders")
did not take into account the different base address origins, and were
eventually reverted:
aeb7923733 ("revert "fs/binfmt_elf: use PT_LOAD p_align values for static PIE"")
In order to get the correct alignment from an mmap base, binfmt_elf must
perform a 0-address load first, then tear down the mapping and perform
alignment on the resulting address. Since this is slightly more overhead,
only do this when it is needed (i.e. the alignment is not the default
ELF alignment). This does, however, have the benefit of being able to
use MAP_FIXED_NOREPLACE, to avoid potential collisions.
With this fixed, enable the static PIE self tests again.
Reported-by: H.J. Lu <hjl.tools@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=215275
Link: https://lore.kernel.org/r/20240508173149.677910-3-keescook@chromium.org
Signed-off-by: Kees Cook <kees@kernel.org>
After commit 4d1cd3b2c5 ("tools/testing/selftests/exec: fix link
error"), the load address alignment tests tried to build statically.
This was silently ignored in some cases. However, after attempting to
further fix the build by switching to "-static-pie", the test started
failing. This appears to be due to non-PT_INTERP ET_DYN execs ("static
PIE") not doing alignment correctly, which remains unfixed[1]. See commit
aeb7923733 ("revert "fs/binfmt_elf: use PT_LOAD p_align values for
static PIE"") for more details.
Provide rules to build both static and non-static PIE binaries, improve
debug reporting, and perform several test steps instead of a single
all-or-nothing test. However, do not actually enable static-pie tests;
alignment specification is only supported for ET_DYN with PT_INTERP
("regular PIE").
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215275 [1]
Link: https://lore.kernel.org/r/20240508173149.677910-1-keescook@chromium.org
Signed-off-by: Kees Cook <kees@kernel.org>
Use ksft_exit_fail_perror() to print the value of errno and its string
form. This is the first user of the ksft_exit_fail_perror() and proves
the usefulness of this API.
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Christian Brauner
Farid ZakariaandChristian Brauner
Bala-Vignesh-ReddyandAndrew Morton
Linus Torvalds
Mickaël SalaünandKees Cook
Tycho AndersenandKees Cook
Javier CarrascoandShuah Khan
Chang YuandShuah Khan
Edward LiawandAndrew Morton
Muhammad Usama AnjumandShuah Khan
Kees Cook