mirror of
https://github.com/linux-msm/laptops-kernel.git
synced 2026-08-13 14:19:53 -07:00
topic/glymur-laptops
369
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 Christian Brauner
|
572417aa0c |
Merge branch 'vfs-7.3.lookup' into vfs.all
Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
 Jori KoolstraandChristian Brauner
|
d350627017 |
vfs: missing inode operation should return a consistent error code
Currently several different error codes are used in the VFS for
situations where the underlying filesystem does not support the
requested inode operation (such as mkdir, tmpfile, create, etc.)
Examples: create returns EACCES, mkdir EPERM, tmpfile EOPNOTSUPP,
fileattr_get ENOIOCTLCMD.
We should provide a sensible unified error code for these situations.
EOPNOTSUPP is already used for this both in the kernel (when lacking
tmpfile support) and in userland (e.g. glibc).[1] Restricting EOPNOTSUPP
to socket operations as POSIX suggests is not the current reality and
this was recently changed in the man page as well.[2]
vfs_fileattr_get|set return ENOIOCTLCMD, but this cannot be changed
since EOPNOTSUPP is already used to by underlying filesystems to indicate
that a flag is not supported. The change to EOPNOTSUPP was reverted by
|
||
|
Christian Brauner
|
79d27fd718 |
arch: hookup fchroot() system call
Wire up the fchroot() system call as number 472 on (nearly) all architectures and sync the mirrored copies of the syscall tables and the asm-generic unistd.h under tools/. Link: https://patch.msgid.link/20260724-work-failfs-v2-5-485dabbae185@kernel.org Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org> |
||
 Linus Torvalds
|
7e0e7bd60d |
Merge tag 'vfs-7.2-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"Features:
- Reduce pipe->mutex contention by pre-allocating pages outside the
lock in anon_pipe_write().
anon_pipe_write() called alloc_page() once per page while holding
pipe->mutex. The allocation can sleep doing direct reclaim and runs
memcg charging, which extends the critical section and stalls any
concurrent reader on the same mutex. Now up to 8 pages are
pre-allocated before the mutex is taken, leftovers are recycled
into the per-pipe tmp_page[] cache before unlock, and any remainder
is released after unlock, keeping the allocator out of the critical
section on both sides. On a writers x readers sweep with 64KB
writes against a 1 MB pipe throughput improves 6-28% and average
write latency drops 5-22%; under memory pressure - when the cost of
holding the mutex across reclaim is highest - throughput improves
21-48% and latency drops 17-33%. The microbenchmark is added to
selftests.
- uaccess/sockptr: fix the ignored_trailing logic in
copy_struct_to_user() to behave as documented and the usize check
in copy_struct_from_sockptr() for user pointers, and add
copy_struct_{from,to}_bounce_buffer() and copy_struct_to_sockptr()
helpers for upcoming users (IPPROTO_SMBDIRECT, IPPROTO_QUIC).
- bpf: add a sleepable bpf_real_inode() kfunc that resolves the real
inode backing a dentry via d_real_inode(). On overlayfs the inode
attached to the dentry doesn't carry the underlying device
information; this is used by the filesystem restriction BPF program
that was merged into systemd.
- docs: add guidelines for submitting new filesystems, motivated by
the maintenance burden abandoned and untestable filesystems impose
on VFS developers, blocking infrastructure work like folio
conversions and iomap migration.
Fixes:
- libfs: set SB_I_NOEXEC and SB_I_NODEV by default in init_pseudo()
and drop the now-redundant assignments in callers. This began as a
one-line dma-buf fix for a path_noexec() warning; a pseudo
filesystem has no reason not to set SB_I_NOEXEC. All init_pseudo()
callers were audited: the only visible effect is on dma-buf where
SB_I_NOEXEC silences the warning.
- Handle set_blocksize() failures in legacy filesystems (bfs, hpfs,
qnx4, jfs, befs, affs, isofs, minix, ntfs3, omfs). Mounting a
device with a sector size > PAGE_SIZE crashed roughly half of them;
the rest had the same missing error handling pattern. Plus a
follow-up releasing the superblock buffer_head when setting the
minix v3 block size fails.
- mount: honour SB_NOUSER in the new mount API.
- fs/fcntl: fix a SOFTIRQ-unsafe lock order in fasync signaling by
switching the process-group paths of send_sigio() and send_sigurg()
from read_lock(&tasklist_lock) to RCU, matching the single-PID
path.
- vfs: add an FS_USERNS_DELEGATABLE flag and set it for NFS, fixing
delegated NFS mounts (fsopen() in a container with the mount
performed by a privileged daemon) that broke when non-init
s_user_ns was tied to FS_USERNS_MOUNT.
- selftests/namespaces: fix a hang in nsid_test where an unreaped
grandchild kept the TAP pipe write-end open, a waitpid(-1) race in
listns_efault_test, and a false FAIL on kernels without listns()
where the tests should SKIP.
- filelock: fix the break_lease() stub signature for
CONFIG_FILE_LOCKING=n.
- init/initramfs_test: wait for the async initramfs unpacking before
running; the test and do_populate_rootfs() share the parser state.
- fs/coredump: reduce redundant log noise in
validate_coredump_safety().
- iomap: pass the correct length to fserror_report_io() in
__iomap_write_begin().
- backing-file: fix the backing_file_open() kerneldoc.
Cleanups:
- initramfs: refactor the cpio hex header parsing to use hex2bin()
instead of the hand-rolled simple_strntoul() which is reverted, and
extend the initramfs KUnit tests to cover header fields with 0x
prefixes.
- Replace __get_free_pages() and friends with kmalloc()/kzalloc()
across quota, proc, ocfs2/dlm, nilfs2, nfs, nfsd, libfs, jfs, jbd2,
isofs, fuse, select, namespace, configfs, binfmt_misc, bfs, and the
do_mounts init code - part of the larger work of replacing page
allocator calls with kmalloc().
- Use clear_and_wake_up_bit() in unlock_buffer() and
journal_end_buffer_io_sync() instead of open-coding the sequence.
- Drop unused VFS exports: unexport drop_super_exclusive(), remove
start_removing_user_path_at(), and fold __start_removing_path()
into start_removing_path().
- fs/read_write: narrow the __kernel_write() export with
EXPORT_SYMBOL_FOR_MODULES().
- vfs: uapi: retire octal and hex constants in favor of (1 << n) for
the O_ flags. Finding a free bit for a new flag across the
architectures was needlessly hard with the mixed bases.
- dcache: add extra sanity checks of dead dentries in dentry_free()
via a new DENTRY_WARN_ONCE() that also prints d_flags.
- iov_iter: use kmemdup_array() in dup_iter() to harden the
allocation against multiplication overflow.
- fs/pipe: write to ->poll_usage only once.
- vfs: remove an always-taken if-branch in find_next_fd().
- dcache: use kmalloc_flex() for struct external_name in __d_alloc().
- namei: use QSTR() instead of QSTR_INIT() in path_pts().
- sync_file_range: delete dead S_ISLNK code.
- Comment fixes: retire a stale comment in fget_task_next() and fix
assorted spelling mistakes"
* tag 'vfs-7.2-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (73 commits)
backing-file: fix backing_file_open() kerneldoc parameter
iomap: pass the correct len to fserror_report_io in __iomap_write_begin
vfs: add FS_USERNS_DELEGATABLE flag and set it for NFS
filelock: fix break_lease() stub signature for CONFIG_FILE_LOCKING=n
vfs: uapi: retire octal and hex numbers in favor of (1 << n) for O_ flags
bpf: add bpf_real_inode() kfunc
fs/read_write: Do not export __kernel_write() to the entire world
libfs: drop redundant SB_I_NOEXEC/SB_I_NODEV in init_pseudo() callers
libfs: set SB_I_NOEXEC and SB_I_NODEV by default in init_pseudo()
mount: honour SB_NOUSER in the new mount API
fs/fcntl: fix SOFTIRQ-unsafe lock order in fasync signaling
selftests/pipe: add pipe_bench microbenchmark
fs/pipe: pre-allocate pages outside pipe->mutex in anon_pipe_write
fs: retire stale comment in fget_task_next()
fs: fix spelling mistakes in comment
bfs: replace get_zeroed_page() with kzalloc()
binfmt_misc: replace __get_free_page() with kmalloc()
configfs: replace __get_free_pages() with kzalloc()
fs/namespace: use __getname() to allocate mntpath buffer
fs/select: replace __get_free_page() with kmalloc()
...
|
||
|
Jori KoolstraandChristian Brauner
|
0da79c259a |
vfs: uapi: retire octal and hex numbers in favor of (1 << n) for O_ flags
A recent build failure[1] exposed the diffculty of working with the
current octal and hex definitions of O_ flags when trying to find a gap
for a new flag. This difficulty is compounded by the fact that O_ flags
may have architectural specific values.
Replace the hex/octal #defines, which are hard to parse when looking for
free bits, with explicit bit shifts like (1 << 11). Also, add comments
that identify which architectures redefine some of the seemingly free
("cursed") bits in uapi/asm-generic/fcntl.h. These should not be used to
define new O_ flags (for now, at least).
The translastion was done with Claude Opus 4.8, and verified with a
(non-AI) gawk script. The accounting of which architectures claim
which bit-gaps in uapi/asm-generic/fcntl.h is also done by hand.
[1]: https://lore.kernel.org/all/agruPPybCx8q2XcJ@sirena.org.uk/
Assisted-by: Claude:Opus 4.8
Signed-off-by: Jori Koolstra <jkoolstra@xs4all.nl>
Link: https://patch.msgid.link/20260604222405.5382-1-jkoolstra@xs4all.nl
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
|
||
 Dorjoy ChowdhuryandChristian Brauner
|
cf1b04aaef |
openat2: introduce EFTYPE error code
Introduce a new error code EFTYPE for wrong file type operations. EFTYPE is already used in BSD systems like FreeBSD and macOS. This will be used by the upcoming OPENAT2_REGULAR flag support to return a specific error when a path doesn't refer to a regular file. Signed-off-by: Dorjoy Chowdhury <dorjoychy111@gmail.com> Link: https://patch.msgid.link/20260328172314.45807-2-dorjoychy111@gmail.com Reviewed-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Aleksa Sarai <aleksa@amutable.com> Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org> |
||
|
Jori KoolstraandChristian Brauner
|
31cf44efa6 |
vfs: add O_EMPTYPATH to openat(2)/openat2(2)
To get an operable version of an O_PATH file descriptor, it is possible
to use openat(fd, ".", O_DIRECTORY) for directories, but other files
currently require going through open("/proc/<pid>/fd/<nr>"), which
depends on a functioning procfs.
This patch adds the O_EMPTYPATH flag to openat(2)/openat2(2). If passed,
LOOKUP_EMPTY is set at path resolution time.
Note: This implies that you cannot rely anymore on disabling procfs from
being mounted (e.g. inside a container without procfs mounted and with
CAP_SYS_ADMIN dropped) to prevent O_PATH fds from being re-opened
read-write.
Signed-off-by: Jori Koolstra <jkoolstra@xs4all.nl>
Link: https://patch.msgid.link/20260424114611.1678641-2-jkoolstra@xs4all.nl
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
|
||
|
Linus Torvalds
|
36ae1c45b2 |
Merge tag 'sched-core-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Scheduler Kconfig space updates:
- Further consolidate configurable preemption modes (Peter Zijlstra)
Reduce the number of architectures that are allowed to offer
PREEMPT_NONE and PREEMPT_VOLUNTARY, reducing the number of
preemption models from four to just two: 'full' and 'lazy' on
up-to-date architectures (arm64, loongarch, powerpc, riscv, s390,
x86).
None and voluntary are only available as legacy features on
platforms that don't implement lazy preemption yet, or which don't
even support preemption.
The goal is to eventually remove cond_resched() and voluntary
preemption altogether.
RSEQ based 'scheduler time slice extension' support (Thomas Gleixner
and Peter Zijlstra):
This allows a thread to request a time slice extension when it enters
a critical section to avoid contention on a resource when the thread
is scheduled out inside of the critical section.
- Add fields and constants for time slice extension
- Provide static branch for time slice extensions
- Add statistics for time slice extensions
- Add prctl() to enable time slice extensions
- Implement sys_rseq_slice_yield()
- Implement syscall entry work for time slice extensions
- Implement time slice extension enforcement timer
- Reset slice extension when scheduled
- Implement rseq_grant_slice_extension()
- entry: Hook up rseq time slice extension
- selftests: Implement time slice extension test
- Allow registering RSEQ with slice extension
- Move slice_ext_nsec to debugfs
- Lower default slice extension
- selftests/rseq: Add rseq slice histogram script
Scheduler performance/scalability improvements:
- Update rq->avg_idle when a task is moved to an idle CPU, which
improves the scalability of various workloads (Shubhang Kaushik)
- Reorder fields in 'struct rq' for better caching (Blake Jones)
- Fair scheduler SMP NOHZ balancing code speedups (Shrikanth Hegde):
- Move checking for nohz cpus after time check
- Change likelyhood of nohz.nr_cpus
- Remove nohz.nr_cpus and use weight of cpumask instead
- Avoid false sharing for sched_clock_irqtime (Wangyang Guo)
- Cleanups (Yury Norov):
- Drop useless cpumask_empty() in find_energy_efficient_cpu()
- Simplify task_numa_find_cpu()
- Use cpumask_weight_and() in sched_balance_find_dst_group()
DL scheduler updates:
- Add a deadline server for sched_ext tasks (by Andrea Righi and Joel
Fernandes, with fixes by Peter Zijlstra)
RT scheduler updates:
- Skip currently executing CPU in rto_next_cpu() (Chen Jinghuang)
Entry code updates and performance improvements (Jinjie Ruan)
This is part of the scheduler tree in this cycle due to inter-
dependencies with the RSEQ based time slice extension work:
- Remove unused syscall argument from syscall_trace_enter()
- Rework syscall_exit_to_user_mode_work() for architecture reuse
- Add arch_ptrace_report_syscall_entry/exit()
- Inline syscall_exit_work() and syscall_trace_enter()
Scheduler core updates (Peter Zijlstra):
- Rework sched_class::wakeup_preempt() and rq_modified_*()
- Avoid rq->lock bouncing in sched_balance_newidle()
- Rename rcu_dereference_check_sched_domain() =>
rcu_dereference_sched_domain()
- <linux/compiler_types.h>: Add the __signed_scalar_typeof() helper
Fair scheduler updates/refactoring (Peter Zijlstra and Ingo Molnar):
- Fold the sched_avg update
- Change rcu_dereference_check_sched_domain() to rcu-sched
- Switch to rcu_dereference_all()
- Remove superfluous rcu_read_lock()
- Limit hrtick work
- Join two #ifdef CONFIG_FAIR_GROUP_SCHED blocks
- Clean up comments in 'struct cfs_rq'
- Separate se->vlag from se->vprot
- Rename cfs_rq::avg_load to cfs_rq::sum_weight
- Rename cfs_rq::avg_vruntime to ::sum_w_vruntime & helper functions
- Introduce and use the vruntime_cmp() and vruntime_op() wrappers for
wrapped-signed aritmetics
- Sort out 'blocked_load*' namespace noise
Scheduler debugging code updates:
- Export hidden tracepoints to modules (Gabriele Monaco)
- Convert copy_from_user() + kstrtouint() to kstrtouint_from_user()
(Fushuai Wang)
- Add assertions to QUEUE_CLASS (Peter Zijlstra)
- hrtimer: Fix tracing oddity (Thomas Gleixner)
Misc fixes and cleanups:
- Re-evaluate scheduling when migrating queued tasks out of throttled
cgroups (Zicheng Qu)
- Remove task_struct->faults_disabled_mapping (Christoph Hellwig)
- Fix math notation errors in avg_vruntime comment (Zhan Xusheng)
- sched/cpufreq: Use %pe format for PTR_ERR() printing
(zenghongling)"
* tag 'sched-core-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (64 commits)
sched: Re-evaluate scheduling when migrating queued tasks out of throttled cgroups
sched/cpufreq: Use %pe format for PTR_ERR() printing
sched/rt: Skip currently executing CPU in rto_next_cpu()
sched/clock: Avoid false sharing for sched_clock_irqtime
selftests/sched_ext: Add test for DL server total_bw consistency
selftests/sched_ext: Add test for sched_ext dl_server
sched/debug: Fix dl_server (re)start conditions
sched/debug: Add support to change sched_ext server params
sched_ext: Add a DL server for sched_ext tasks
sched/debug: Stop and start server based on if it was active
sched/debug: Fix updating of ppos on server write ops
sched/deadline: Clear the defer params
entry: Inline syscall_exit_work() and syscall_trace_enter()
entry: Add arch_ptrace_report_syscall_entry/exit()
entry: Rework syscall_exit_to_user_mode_work() for architecture reuse
entry: Remove unused syscall argument from syscall_trace_enter()
sched: remove task_struct->faults_disabled_mapping
sched: Update rq->avg_idle when a task is moved to an idle CPU
selftests/rseq: Add rseq slice histogram script
hrtimer: Fix trace oddity
...
|
||
  Thomas GleixnerandPeter Zijlstra
|
99d2592023 |
rseq: Implement sys_rseq_slice_yield()
Provide a new syscall which has the only purpose to yield the CPU after the kernel granted a time slice extension. sched_yield() is not suitable for that because it unconditionally schedules, but the end of the time slice extension is not required to schedule when the task was already preempted. This also allows to have a strict check for termination to catch user space invoking random syscalls including sched_yield() from a time slice extension region. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://patch.msgid.link/20251215155708.929634896@linutronix.de |
||
 Darrick J. WongandChristian Brauner
|
6025447737 |
uapi: promote EFSCORRUPTED and EUCLEAN to errno.h
Stop definining these privately and instead move them to the uapi errno.h so that they become canonical instead of copy pasta. Cc: linux-api@vger.kernel.org Signed-off-by: Darrick J. Wong <djwong@kernel.org> Link: https://patch.msgid.link/176826402587.3490369.17659117524205214600.stgit@frogsfrogsfrogs Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
Linus Torvalds
|
f2e74ecfba |
Merge tag 'vfs-6.19-rc1.folio' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull folio updates from Christian Brauner: "Add a new folio_next_pos() helper function that returns the file position of the first byte after the current folio. This is a common operation in filesystems when needing to know the end of the current folio. The helper is lifted from btrfs which already had its own version, and is now used across multiple filesystems and subsystems: - btrfs - buffer - ext4 - f2fs - gfs2 - iomap - netfs - xfs - mm This fixes a long-standing bug in ocfs2 on 32-bit systems with files larger than 2GiB. Presumably this is not a common configuration, but the fix is backported anyway. The other filesystems did not have bugs, they were just mildly inefficient. This also introduce uoff_t as the unsigned version of loff_t. A recent commit inadvertently changed a comparison from being unsigned (on 64-bit systems) to being signed (which it had always been on 32-bit systems), leading to sporadic fstests failures. Generally file sizes are restricted to being a signed integer, but in places where -1 is passed to indicate "up to the end of the file", it is convenient to have an unsigned type to ensure comparisons are always unsigned regardless of architecture" * tag 'vfs-6.19-rc1.folio' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: fs: Add uoff_t mm: Use folio_next_pos() xfs: Use folio_next_pos() netfs: Use folio_next_pos() iomap: Use folio_next_pos() gfs2: Use folio_next_pos() f2fs: Use folio_next_pos() ext4: Use folio_next_pos() buffer: Use folio_next_pos() btrfs: Use folio_next_pos() filemap: Add folio_next_pos() |
||
 Matthew Wilcox (Oracle)andChristian Brauner
|
37d369fa97 |
fs: Add uoff_t
In a recent commit, I inadvertently changed a comparison from being an unsigned comparison (on 64-bit systems) to being a signed comparison (which it had always been on 32-bit systems). This led to a sporadic fstests failure. To make sure this comparison is always unsigned, introduce a new type, uoff_t which is the unsigned version of loff_t. Generally file sizes are restricted to being a signed integer, but in these two places it is convenient to pass -1 to indicate "up to the end of the file". Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Link: https://patch.msgid.link/20251123220518.1447261-1-willy@infradead.org Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
Christian Brauner
|
b36d4b6aa8 |
arch: hookup listns() system call
Add the listns() system call to all architectures. Link: https://patch.msgid.link/20251029-work-namespace-nstree-listns-v4-20-2e6f823ebdc0@kernel.org Tested-by: syzbot@syzkaller.appspotmail.com Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
Linus Torvalds
|
8be4d31cb8 |
Merge tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Wrap datapath globals into net_aligned_data, to avoid false sharing
- Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container)
- Add SO_INQ and SCM_INQ support to AF_UNIX
- Add SIOCINQ support to AF_VSOCK
- Add TCP_MAXSEG sockopt to MPTCP
- Add IPv6 force_forwarding sysctl to enable forwarding per interface
- Make TCP validation of whether packet fully fits in the receive
window and the rcv_buf more strict. With increased use of HW
aggregation a single "packet" can be multiple 100s of kB
- Add MSG_MORE flag to optimize large TCP transmissions via sockmap,
improves latency up to 33% for sockmap users
- Convert TCP send queue handling from tasklet to BH workque
- Improve BPF iteration over TCP sockets to see each socket exactly
once
- Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code
- Support enabling kernel threads for NAPI processing on per-NAPI
instance basis rather than a whole device. Fully stop the kernel
NAPI thread when threaded NAPI gets disabled. Previously thread
would stick around until ifdown due to tricky synchronization
- Allow multicast routing to take effect on locally-generated packets
- Add output interface argument for End.X in segment routing
- MCTP: add support for gateway routing, improve bind() handling
- Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink
- Add a new neighbor flag ("extern_valid"), which cedes refresh
responsibilities to userspace. This is needed for EVPN multi-homing
where a neighbor entry for a multi-homed host needs to be synced
across all the VTEPs among which the host is multi-homed
- Support NUD_PERMANENT for proxy neighbor entries
- Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM
- Add sequence numbers to netconsole messages. Unregister
netconsole's console when all net targets are removed. Code
refactoring. Add a number of selftests
- Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol
should be used for an inbound SA lookup
- Support inspecting ref_tracker state via DebugFS
- Don't force bonding advertisement frames tx to ~333 ms boundaries.
Add broadcast_neighbor option to send ARP/ND on all bonded links
- Allow providing upcall pid for the 'execute' command in openvswitch
- Remove DCCP support from Netfilter's conntrack
- Disallow multiple packet duplications in the queuing layer
- Prevent use of deprecated iptables code on PREEMPT_RT
Driver API:
- Support RSS and hashing configuration over ethtool Netlink
- Add dedicated ethtool callbacks for getting and setting hashing
fields
- Add support for power budget evaluation strategy in PSE /
Power-over-Ethernet. Generate Netlink events for overcurrent etc
- Support DPLL phase offset monitoring across all device inputs.
Support providing clock reference and SYNC over separate DPLL
inputs
- Support traffic classes in devlink rate API for bandwidth
management
- Remove rtnl_lock dependency from UDP tunnel port configuration
Device drivers:
- Add a new Broadcom driver for 800G Ethernet (bnge)
- Add a standalone driver for Microchip ZL3073x DPLL
- Remove IBM's NETIUCV device driver
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support zero-copy Tx of DMABUF memory
- take page size into account for page pool recycling rings
- Intel (100G, ice, idpf):
- idpf: XDP and AF_XDP support preparations
- idpf: add flow steering
- add link_down_events statistic
- clean up the TSPLL code
- preparations for live VM migration
- nVidia/Mellanox:
- support zero-copy Rx/Tx interfaces (DMABUF and io_uring)
- optimize context memory usage for matchers
- expose serial numbers in devlink info
- support PCIe congestion metrics
- Meta (fbnic):
- add 25G, 50G, and 100G link modes to phylink
- support dumping FW logs
- Marvell/Cavium:
- support for CN20K generation of the Octeon chips
- Amazon:
- add HW clock (without timestamping, just hypervisor time access)
- Ethernet virtual:
- VirtIO net:
- support segmentation of UDP-tunnel-encapsulated packets
- Google (gve):
- support packet timestamping and clock synchronization
- Microsoft vNIC:
- add handler for device-originated servicing events
- allow dynamic MSI-X vector allocation
- support Tx bandwidth clamping
- Ethernet NICs consumer, and embedded:
- AMD:
- amd-xgbe: hardware timestamping and PTP clock support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- use napi_complete_done() return value to support NAPI polling
- add support for re-starting auto-negotiation
- Broadcom switches (b53):
- support BCM5325 switches
- add bcm63xx EPHY power control
- Synopsys (stmmac):
- lots of code refactoring and cleanups
- TI:
- icssg-prueth: read firmware-names from device tree
- icssg: PRP offload support
- Microchip:
- lan78xx: convert to PHYLINK for improved PHY and MAC management
- ksz: add KSZ8463 switch support
- Intel:
- support similar queue priority scheme in multi-queue and
time-sensitive networking (taprio)
- support packet pre-emption in both
- RealTek (r8169):
- enable EEE at 5Gbps on RTL8126
- Airoha:
- add PPPoE offload support
- MDIO bus controller for Airoha AN7583
- Ethernet PHYs:
- support for the IPQ5018 internal GE PHY
- micrel KSZ9477 switch-integrated PHYs:
- add MDI/MDI-X control support
- add RX error counters
- add cable test support
- add Signal Quality Indicator (SQI) reporting
- dp83tg720: improve reset handling and reduce link recovery time
- support bcm54811 (and its MII-Lite interface type)
- air_en8811h: support resume/suspend
- support PHY counters for QCA807x and QCA808x
- support WoL for QCA807x
- CAN drivers:
- rcar_canfd: support for Transceiver Delay Compensation
- kvaser: report FW versions via devlink dev info
- WiFi:
- extended regulatory info support (6 GHz)
- add statistics and beacon monitor for Multi-Link Operation (MLO)
- support S1G aggregation, improve S1G support
- add Radio Measurement action fields
- support per-radio RTS threshold
- some work around how FIPS affects wifi, which was wrong (RC4 is
used by TKIP, not only WEP)
- improvements for unsolicited probe response handling
- WiFi drivers:
- RealTek (rtw88):
- IBSS mode for SDIO devices
- RealTek (rtw89):
- BT coexistence for MLO/WiFi7
- concurrent station + P2P support
- support for USB devices RTL8851BU/RTL8852BU
- Intel (iwlwifi):
- use embedded PNVM in (to be released) FW images to fix
compatibility issues
- many cleanups (unused FW APIs, PCIe code, WoWLAN)
- some FIPS interoperability
- MediaTek (mt76):
- firmware recovery improvements
- more MLO work
- Qualcomm/Atheros (ath12k):
- fix scan on multi-radio devices
- more EHT/Wi-Fi 7 features
- encapsulation/decapsulation offload
- Broadcom (brcm80211):
- support SDIO 43751 device
- Bluetooth:
- hci_event: add support for handling LE BIG Sync Lost event
- ISO: add socket option to report packet seqnum via CMSG
- ISO: support SCM_TIMESTAMPING for ISO TS
- Bluetooth drivers:
- intel_pcie: support Function Level Reset
- nxpuart: add support for 4M baudrate
- nxpuart: implement powerup sequence, reset, FW dump, and FW loading"
* tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1742 commits)
dpll: zl3073x: Fix build failure
selftests: bpf: fix legacy netfilter options
ipv6: annotate data-races around rt->fib6_nsiblings
ipv6: fix possible infinite loop in fib6_info_uses_dev()
ipv6: prevent infinite loop in rt6_nlmsg_size()
ipv6: add a retry logic in net6_rt_notify()
vrf: Drop existing dst reference in vrf_ip6_input_dst
net/sched: taprio: align entry index attr validation with mqprio
net: fsl_pq_mdio: use dev_err_probe
selftests: rtnetlink.sh: remove esp4_offload after test
vsock: remove unnecessary null check in vsock_getname()
igb: xsk: solve negative overflow of nb_pkts in zerocopy mode
stmmac: xsk: fix negative overflow of budget in zerocopy mode
dt-bindings: ieee802154: Convert at86rf230.txt yaml format
net: dsa: microchip: Disable PTP function of KSZ8463
net: dsa: microchip: Setup fiber ports for KSZ8463
net: dsa: microchip: Write switch MAC address differently for KSZ8463
net: dsa: microchip: Use different registers for KSZ8463
net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver
dt-bindings: net: dsa: microchip: Add KSZ8463 switch support
...
|
||
|
Linus Torvalds
|
57fcb7d930 |
Merge tag 'vfs-6.17-rc1.fileattr' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull fileattr updates from Christian Brauner: "This introduces the new file_getattr() and file_setattr() system calls after lengthy discussions. Both system calls serve as successors and extensible companions to the FS_IOC_FSGETXATTR and FS_IOC_FSSETXATTR system calls which have started to show their age in addition to being named in a way that makes it easy to conflate them with extended attribute related operations. These syscalls allow userspace to set filesystem inode attributes on special files. One of the usage examples is the XFS quota projects. XFS has project quotas which could be attached to a directory. All new inodes in these directories inherit project ID set on parent directory. The project is created from userspace by opening and calling FS_IOC_FSSETXATTR on each inode. This is not possible for special files such as FIFO, SOCK, BLK etc. Therefore, some inodes are left with empty project ID. Those inodes then are not shown in the quota accounting but still exist in the directory. This is not critical but in the case when special files are created in the directory with already existing project quota, these new inodes inherit extended attributes. This creates a mix of special files with and without attributes. Moreover, special files with attributes don't have a possibility to become clear or change the attributes. This, in turn, prevents userspace from re-creating quota project on these existing files. In addition, these new system calls allow the implementation of additional attributes that we couldn't or didn't want to fit into the legacy ioctls anymore" * tag 'vfs-6.17-rc1.fileattr' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: fs: tighten a sanity check in file_attr_to_fileattr() tree-wide: s/struct fileattr/struct file_kattr/g fs: introduce file_getattr and file_setattr syscalls fs: prepare for extending file_get/setattr() fs: make vfs_fileattr_[get|set] return -EOPNOTSUPP selinux: implement inode_file_[g|s]etattr hooks lsm: introduce new hooks for setting/getting inode fsxattr fs: split fileattr related helpers into separate file |
||
  Kuniyuki IwashimaandJakub Kicinski
|
df30285b36 |
af_unix: Introduce SO_INQ.
We have an application that uses almost the same code for TCP and AF_UNIX (SOCK_STREAM). TCP can use TCP_INQ, but AF_UNIX doesn't have it and requires an extra syscall, ioctl(SIOCINQ) or getsockopt(SO_MEMINFO) as an alternative. Let's introduce the generic version of TCP_INQ. If SO_INQ is enabled, recvmsg() will put a cmsg of SCM_INQ that contains the exact value of ioctl(SIOCINQ). The cmsg is also included when msg->msg_get_inq is non-zero to make sockets io_uring-friendly. Note that SOCK_CUSTOM_SOCKOPT is flagged only for SOCK_STREAM to override setsockopt() for SOL_SOCKET. By having the flag in struct unix_sock, instead of struct sock, we can later add SO_INQ support for TCP and reuse tcp_sk(sk)->recvmsg_inq. Note also that supporting custom getsockopt() for SOL_SOCKET will need preparation for other SOCK_CUSTOM_SOCKOPT users (UDP, vsock, MPTCP). Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20250702223606.1054680-7-kuniyu@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
 Andrey AlbershteynandChristian Brauner
|
be7efb2d20 |
fs: introduce file_getattr and file_setattr syscalls
Introduce file_getattr() and file_setattr() syscalls to manipulate inode extended attributes. The syscalls takes pair of file descriptor and pathname. Then it operates on inode opened accroding to openat() semantics. The struct file_attr is passed to obtain/change extended attributes. This is an alternative to FS_IOC_FSSETXATTR ioctl with a difference that file don't need to be open as we can reference it with a path instead of fd. By having this we can manipulated inode extended attributes not only on regular files but also on special ones. This is not possible with FS_IOC_FSSETXATTR ioctl as with special files we can not call ioctl() directly on the filesystem inode using fd. This patch adds two new syscalls which allows userspace to get/set extended inode attributes on special files by using parent directory and a path - *at() like syscall. CC: linux-api@vger.kernel.org CC: linux-fsdevel@vger.kernel.org CC: linux-xfs@vger.kernel.org Signed-off-by: Andrey Albershteyn <aalbersh@kernel.org> Link: https://lore.kernel.org/20250630-xattrat-syscall-v6-6-c4e3bc35227b@kernel.org Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
 Al Viro
|
f65bbf0539 |
alpha: regularize the situation with asm/param.h
The only reason why alpha can't do what sparc et.al. are doing is that include/asm-generic/param.h relies upon the value of HZ set for userland header in uapi/asm/param.h being 100. We need that value to define USER_HZ and we need that definition to outlive the redefinition of HZ kernel-side. And alpha needs it to be 1024, not 100 like everybody else. So let's add __USER_HZ to uapi/asm-generic/param.h, defaulting to 100 and used to define HZ. That way include/asm-generic/param.h can use that thing instead of open-coding it - it won't be affected by undefining and redefining HZ. That done, alpha asm/param.h can be removed and uapi/asm/param.h switched to defining __USER_HZ and EXEC_PAGESIZE and then including <asm-generic/param.h> - asm/param.h will resolve to uapi/asm/param.h, which pulls <asm-generic/param.h>, which will do the right thing both in the kernel and userland contexts. Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> |
||
  Kuniyuki IwashimaandDavid S. Miller
|
77cbe1a6d8 |
af_unix: Introduce SO_PASSRIGHTS.
As long as recvmsg() or recvmmsg() is used with cmsg, it is not possible to avoid receiving file descriptors via SCM_RIGHTS. This behaviour has occasionally been flagged as problematic, as it can be (ab)used to trigger DoS during close(), for example, by passing a FUSE-controlled fd or a hung NFS fd. For instance, as noted on the uAPI Group page [0], an untrusted peer could send a file descriptor pointing to a hung NFS mount and then close it. Once the receiver calls recvmsg() with msg_control, the descriptor is automatically installed, and then the responsibility for the final close() now falls on the receiver, which may result in blocking the process for a long time. Regarding this, systemd calls cmsg_close_all() [1] after each recvmsg() to close() unwanted file descriptors sent via SCM_RIGHTS. However, this cannot work around the issue at all, because the final fput() may still occur on the receiver's side once sendmsg() with SCM_RIGHTS succeeds. Also, even filtering by LSM at recvmsg() does not work for the same reason. Thus, we need a better way to refuse SCM_RIGHTS at sendmsg(). Let's introduce SO_PASSRIGHTS to disable SCM_RIGHTS. Note that this option is enabled by default for backward compatibility. Link: https://uapi-group.org/kernel-features/#disabling-reception-of-scm_rights-for-af_unix-sockets #[0] Link: https://github.com/systemd/systemd/blob/v257.5/src/basic/fd-util.c#L612-L628 #[1] Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Linus Torvalds
|
2d09a9449e |
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"Nothing major this time around.
Apart from the usual perf/PMU updates, some page table cleanups, the
notable features are average CPU frequency based on the AMUv1
counters, CONFIG_HOTPLUG_SMT and MOPS instructions (memcpy/memset) in
the uaccess routines.
Perf and PMUs:
- Support for the 'Rainier' CPU PMU from Arm
- Preparatory driver changes and cleanups that pave the way for BRBE
support
- Support for partial virtualisation of the Apple-M1 PMU
- Support for the second event filter in Arm CSPMU designs
- Minor fixes and cleanups (CMN and DWC PMUs)
- Enable EL2 requirements for FEAT_PMUv3p9
Power, CPU topology:
- Support for AMUv1-based average CPU frequency
- Run-time SMT control wired up for arm64 (CONFIG_HOTPLUG_SMT). It
adds a generic topology_is_primary_thread() function overridden by
x86 and powerpc
New(ish) features:
- MOPS (memcpy/memset) support for the uaccess routines
Security/confidential compute:
- Fix the DMA address for devices used in Realms with Arm CCA. The
CCA architecture uses the address bit to differentiate between
shared and private addresses
- Spectre-BHB: assume CPUs Linux doesn't know about vulnerable by
default
Memory management clean-ups:
- Drop the P*D_TABLE_BIT definition in preparation for 128-bit PTEs
- Some minor page table accessor clean-ups
- PIE/POE (permission indirection/overlay) helpers clean-up
Kselftests:
- MTE: skip hugetlb tests if MTE is not supported on such mappings
and user correct naming for sync/async tag checking modes
Miscellaneous:
- Add a PKEY_UNRESTRICTED definition as 0 to uapi (toolchain people
request)
- Sysreg updates for new register fields
- CPU type info for some Qualcomm Kryo cores"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (72 commits)
arm64: mm: Don't use %pK through printk
perf/arm_cspmu: Fix missing io.h include
arm64: errata: Add newer ARM cores to the spectre_bhb_loop_affected() lists
arm64: cputype: Add MIDR_CORTEX_A76AE
arm64: errata: Add KRYO 2XX/3XX/4XX silver cores to Spectre BHB safe list
arm64: errata: Assume that unknown CPUs _are_ vulnerable to Spectre BHB
arm64: errata: Add QCOM_KRYO_4XX_GOLD to the spectre_bhb_k24_list
arm64/sysreg: Enforce whole word match for open/close tokens
arm64/sysreg: Fix unbalanced closing block
arm64: Kconfig: Enable HOTPLUG_SMT
arm64: topology: Support SMT control on ACPI based system
arch_topology: Support SMT control for OF based system
cpu/SMT: Provide a default topology_is_primary_thread()
arm64/mm: Define PTDESC_ORDER
perf/arm_cspmu: Add PMEVFILT2R support
perf/arm_cspmu: Generalise event filtering
perf/arm_cspmu: Move register definitons to header
arm64/kernel: Always use level 2 or higher for early mappings
arm64/mm: Drop PXD_TABLE_BIT
arm64/mm: Check pmd_table() in pmd_trans_huge()
...
|
||
  Yury KhrustalevandCatalin Marinas
|
6d61527d93 |
mm/pkey: Add PKEY_UNRESTRICTED macro
Memory protection keys (pkeys) uapi has two macros for pkeys restrictions: - PKEY_DISABLE_ACCESS 0x1 - PKEY_DISABLE_WRITE 0x2 with implicit literal value of 0x0 that means "unrestricted". Code that works with pkeys has to use this literal value when implying that a pkey imposes no restrictions. This may reduce readability because 0 can be written in various ways (e.g. 0x0 or 0) and also because 0 in the context of pkeys can be mistaken for "no permissions" (akin PROT_NONE) while it actually means "no restrictions". This is important because pkeys are oftentimes used near mprotect() that uses PROT_ macros. This patch adds PKEY_UNRESTRICTED macro defined as 0x0. Signed-off-by: Yury Khrustalev <yury.khrustalev@arm.com> Acked-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Kevin Brodsky <kevin.brodsky@arm.com> Link: https://lore.kernel.org/r/20250113170619.484698-2-yury.khrustalev@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> |
||
|
Christian Brauner
|
c4a16820d9 |
fs: add open_tree_attr()
Add open_tree_attr() which allow to atomically create a detached mount tree and set mount options on it. If OPEN_TREE_CLONE is used this will allow the creation of a detached mount with a new set of mount options without it ever being exposed to userspace without that set of mount options applied. Link: https://lore.kernel.org/r/20250128-work-mnt_idmap-update-v2-v1-3-c25feb0d2eb3@kernel.org Reviewed-by: "Seth Forshee (DigitalOcean)" <sforshee@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
Linus Torvalds
|
8883957b3c |
Merge tag 'fsnotify_hsm_for_v6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fsnotify pre-content notification support from Jan Kara: "This introduces a new fsnotify event (FS_PRE_ACCESS) that gets generated before a file contents is accessed. The event is synchronous so if there is listener for this event, the kernel waits for reply. On success the execution continues as usual, on failure we propagate the error to userspace. This allows userspace to fill in file content on demand from slow storage. The context in which the events are generated has been picked so that we don't hold any locks and thus there's no risk of a deadlock for the userspace handler. The new pre-content event is available only for users with global CAP_SYS_ADMIN capability (similarly to other parts of fanotify functionality) and it is an administrator responsibility to make sure the userspace event handler doesn't do stupid stuff that can DoS the system. Based on your feedback from the last submission, fsnotify code has been improved and now file->f_mode encodes whether pre-content event needs to be generated for the file so the fast path when nobody wants pre-content event for the file just grows the additional file->f_mode check. As a bonus this also removes the checks whether the old FS_ACCESS event needs to be generated from the fast path. Also the place where the event is generated during page fault has been moved so now filemap_fault() generates the event if and only if there is no uptodate folio in the page cache. Also we have dropped FS_PRE_MODIFY event as current real-world users of the pre-content functionality don't really use it so let's start with the minimal useful feature set" * tag 'fsnotify_hsm_for_v6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: (21 commits) fanotify: Fix crash in fanotify_init(2) fs: don't block write during exec on pre-content watched files fs: enable pre-content events on supported file systems ext4: add pre-content fsnotify hook for DAX faults btrfs: disable defrag on pre-content watched files xfs: add pre-content fsnotify hook for DAX faults fsnotify: generate pre-content permission event on page fault mm: don't allow huge faults for files with pre content watches fanotify: disable readahead if we have pre-content watches fanotify: allow to set errno in FAN_DENY permission response fanotify: report file range info with pre-content events fanotify: introduce FAN_PRE_ACCESS permission event fsnotify: generate pre-content permission event on truncate fsnotify: pass optional file access range in pre-content event fsnotify: introduce pre-content permission events fanotify: reserve event bit of deprecated FAN_DIR_MODIFY fanotify: rename a misnamed constant fanotify: don't skip extra event info if no info_mode is set fsnotify: check if file is actually being watched for pre-content events on open fsnotify: opt-in for permission events at file open time ... |
||
 Anna Emese NyiriandJakub Kicinski
|
e45469e594 |
sock: Introduce SO_RCVPRIORITY socket option
Add new socket option, SO_RCVPRIORITY, to include SO_PRIORITY in the
ancillary data returned by recvmsg().
This is analogous to the existing support for SO_RCVMARK,
as implemented in commit
|
||
 Al ViroandJan Kara
|
ebe559609d |
fs: get rid of __FMODE_NONOTIFY kludge
All it takes to get rid of the __FMODE_NONOTIFY kludge is switching fanotify from anon_inode_getfd() to anon_inode_getfile_fmode() and adding a dentry_open_nonotify() helper to be used by fanotify on the other path. That's it - no more weird shit in OPEN_FMODE(), etc. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Link: https://lore.kernel.org/linux-fsdevel/20241113043003.GH3387508@ZenIV/ Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz> Link: https://patch.msgid.link/d1231137e7b661a382459e79a764259509a4115d.1731684329.git.josef@toxicpanda.com |