Modify these errant comments to use "/*" since they are not kernel-doc
comments.
Warning: ../include/sound/sof/header.h:182 This comment starts with '/**', but isn't a kernel-doc comment.
* OOPS header architecture specific data.
Warning: ../include/sound/sof/header.h:190 This comment starts with '/**', but isn't a kernel-doc comment.
* OOPS header platform specific data.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20260713175510.524728-1-rdunlap@infradead.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add SOF_DAI_AMD_I2S DAI type for ACP7.B/7.F I2S/TDM interfaces.
Register the ACPTDM topology DAI name and map it to SOF_DAI_AMD_I2S;
IPC3 continues to parse ACP I2S link parameters through SOF_ACPI2S_TOKENS
(including the format token from the prior commit), not a new token
group named after ACPTDM. Add sof_link_acp_i2s_load() and the
SOF_DAI_AMD_I2S PCM dai link fixup path.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20260701095759.1012929-16-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The firmware will be able to only save and restore the context related to
library management.
This means that even without a full context save, the libraries do not
need to be re-loaded to the firmware after second or consecutive boots.
This is reported via the FW_READY notification, where BIT(15) indicates:
0 - the library restore is not done
1 - library restore is done
This bit is only valid if full context save is not enabled, full context
save is by definition saves and restores the library related book-keeping
as well.
Add a new flag to tell the platform code if the libraries have been
restored, no need to reload them after boot.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://patch.msgid.link/20250619105623.4546-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ACE3 (Panther Lake) introduced support for microphone privacy feature which
can - in hardware - mute incoming audio data based on a state of a physical
switch.
The change in the privacy state is delivered through interface IP blocks
and can only be handled by the link owner.
In Intel platforms Soundwire is for example host owned, so the interrupt
can only be handled by the host.
Since the input stream is going to be muted by hardware, the host needs to
send a message to firmware about the change in privacy so it can execute a
fade out/in to enhance user experience.
The support for microphone privacy can be queried from the HW_CONFIG data
under the INTEL_MIC_PRIVACY_CAP tuple. This is Intel specific data, the
core will pass it to platform code if the intel_configure_mic_privacy()
callback is provided.
Platform code can call sof_ipc4_mic_privacy_state_change() to send the IPC
message to the firmware on state change.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://patch.msgid.link/20250307112816.1495-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Normally, the type of enums is "unsigned int" or "int". GCC has
the "-fshort-enums" option, which instructs the compiler to
use the smallest data type that can hold all the values in
the enum (i.e: char, short, int or their unsigned variants).
According to the GCC documentation, "-fshort-enums" may be
default on some targets. This seems to be the case for SOF
when built for a certain 32-bit ARM platform.
On Linux, this is not the case (tested with "aarch64-linux-gnu-gcc")
which means enums such as "enum sof_comp_type" will end up having
different sizes on Linux and SOF. Since "enum sof_comp_type" is used in
IPC-related structures such as "struct sof_ipc_comp", this means
the fields of the structures will end up being placed at different
offsets. This, in turn, leads to SOF not being able to properly
interpret data passed from Linux.
With this in mind, replace "enum sof_comp_type" from
"struct sof_ipc_comp" with "uint32_t".
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://patch.msgid.link/20240826182442.6191-1-laurentiumihalcea111@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With the module notification message the information about the notification
is provided via the mailbox with the sof_ipc4_notify_module_data struct.
It contains the module and instance id of the sender of the notification,
the event_id and optionally additional data which is module and event
specific.
At the same time add definitions to identify ALSA kcontrol change
notification.
These notifications use standardized event_id, modules must follow this if
they support such notifications:
upper 16 bit: 0xA15A as a magic identification value
lower 16 bit: param_id of the changed control
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231124150853.18648-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On Intel platforms there is a strict order requirement for the DMA
programming:
DSP side configures the buffer and sets the GEN bit
Host side sets the RUN bit.
In order to follow this flow, a new global message type has been added to
prepare the DSP side of the DMA:
host sends LOAD_LIBRARY_PREPARE with the dma_id
DSP side sets its buffer and sets the GEN bit
Host sets the RUN bit
Host sends LOAD_LIBRARY with dma_id and lib_id
DSP receives the library data.
It is up to the platform code to use the new prepare stage message and how
to handle the reply to it from the firmware, which can indicate that the
message type is not supported/handled.
In this case the kernel should proceed to the LOAD_LIBRARY stage assuming
a single stage library loading:
host sends LOAD_LIBRARY_PREPARE with the dma_id
DSP replies that the message type is not supported/handled
Host acknowledges the return code and sets the RUN bit
Host sends LOAD_LIBRARY with dma_id and lib_id
DSP receives the library data.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Chao Song <chao.song@linux.intel.com>
Link: https://lore.kernel.org/r/20230915114018.1701-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In the chained DMA mode, the firmware allocates buffers for the host
and link DMA, and takes care of copying data between host- and
link-DMA buffers in a low-latency thread. This is different to a
regular pipeline, no processing is allowed, and the connection between
host- and link DMA is handled with a dedicated IPC.
This patch exposes the macros needed to create the required IPC messages.
Signed-off-by: Jyri Sarha <jyri.sarha@intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230321092654.7292-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
