Multiplexer subsystem has now added helpers for getting managed optional
mux-state.
Switch to the new devm_mux_state_get_optional_selected helper.
This change is only compile-tested.
Signed-off-by: Josua Mayer <josua@solid-run.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The driver start registering a regulator, but can still be
enabled even when it is unable to call into the regulator
subsystem:
aarch64-linux-ld: drivers/phy/renesas/phy-rcar-gen3-usb2.o: in function `rcar_gen3_phy_usb2_probe':
phy-rcar-gen3-usb2.c:(.text+0x2884): undefined reference to `devm_regulator_register'
Add a Kconfig dependency to avoid this configuration.
Fixes: b6d7dd1577 ("phy: renesas: rcar-gen3-usb2: Add regulator for OTG VBUS control")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Link: https://patch.msgid.link/20260202095118.1233046-1-arnd@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The existing ID detection logic returned false when both IDDIG and
VBUSVALID were set, which caused incorrect role determination in some
cases. The condition:
!(device && !vbus_valid)
did not properly reflect the intended relationship between IDDIG and
VBUSVALID signals.
Update the logic to:
return vbus_valid ? device : !device;
This ensures that when VBUS is valid, the role follows the IDDIG value,
and when VBUS is not valid, the role is inverted, matching the expected
OTG behavior.
Fixes: b725741f1c ("phy: renesas: rcar-gen3-usb2: Add support for RZ/T2H SoC")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20250821155957.1088337-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add initial support for the Renesas RZ/T2H SoC to the R-Car Gen3 USB2 PHY
driver. The RZ/T2H SoC requires configuration of additional
hardware-specific bits for proper VBUS level control and OTG operation.
Introduce the `vblvl_ctrl` flag in the SoC-specific driver data to enable
handling of VBUS level selection logic using `VBCTRL.VBLVL` bits. This is
required for managing the VBUS status detection and drive logic based on
SoC-specific needs.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250808215209.3692744-5-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Store the SoC-specific driver data pointer (struct rcar_gen3_phy_drv_data)
directly in struct rcar_gen3_chan instead of copying individual flags into
separate channel members.
Obtain the drvdata with of_device_get_match_data() in probe and assign it
to channel->phy_data. Update all call sites to reference
`channel->phy_data->*` for SoC-specific behaviour (for example no_adp_ctrl
and utmi_ctrl). Remove the redundant soc_no_adp_ctrl and utmi_ctrl fields
from struct rcar_gen3_chan.
This simplifies the probe path, reduces duplication, and makes it easier
to extend the driver with additional platform-specific fields in the
future.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20250808215209.3692744-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Pull phy updates from Vinod Koul:
"As usual featuring couple of new driver and bunch of new device
support and some driver changes to Freescale, rockchip driver along
with couple of yaml binding conversions.
New Support:
- Qualcomm IPQ5424 qusb2 support, IPQ5018 uniphy-pcie driver
- Rockchip usb2 support for RK3562, RK3036 usb2 phy support
- Samsung exynos2200 eusb2 phy support and driver refactoring for
this support, exynos7870 USBDRD support
- Mediatek MT7988 xs-phy support
- Broadcom BCM74110 usb phy support
- Renesas RZ/V2H(P) usb2 phy support
Updates:
- Freescale phy rate claculation updates, i.MX95 tuning support
- Better error handling for amlogic pcie phy
- Rockchip color depth configuration and management support
- Yaml binding conversion for RK3399 Type-C and PCIe Phy"
* tag 'phy-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (77 commits)
phy: tegra: p2u: Broaden architecture dependency
phy: rockchip: inno-usb2: Add usb2 phy support for rk3562
dt-bindings: phy: rockchip,inno-usb2phy: add rk3562
phy: rockchip: inno-usb2: add phy definition for rk3036
dt-bindings: phy: rockchip,inno-usb2phy: add rk3036 compatible
phy: freescale: fsl-samsung-hdmi: Improve LUT search for best clock
phy: freescale: fsl-samsung-hdmi: Refactor finding PHY settings
phy: freescale: fsl-samsung-hdmi: Rename phy_clk_round_rate
phy: renesas: phy-rcar-gen3-usb2: Add USB2.0 PHY support for RZ/V2H(P)
phy: renesas: phy-rcar-gen3-usb2: Sort compatible entries by SoC part number
dt-bindings: phy: renesas,usb2-phy: Document RZ/V2H(P) SoC
dt-bindings: phy: renesas,usb2-phy: Add clock constraint for RZ/G2L family
phy: exynos5-usbdrd: support Exynos USBDRD 3.2 4nm controller
phy: phy-snps-eusb2: add support for exynos2200
phy: phy-snps-eusb2: refactor reference clock init
phy: phy-snps-eusb2: make reset control optional
phy: phy-snps-eusb2: make repeater optional
phy: phy-snps-eusb2: split phy init code
phy: phy-snps-eusb2: refactor constructs names
phy: move phy-qcom-snps-eusb2 out of its vendor sub-directory
...
