The hdmi_colorspace enum was defined to represent the colorspace value
of the HDMI infoframes. It was later used by some HDMI drivers to
express the output format they should be setting up.
During the introduction of the HDMI helpers, it then was used to
represent it in the drm_connector_hdmi_state structure.
However, it's always been somewhat redundant with the DRM_COLOR_FORMAT_*
defines, and now with the drm_output_color_format enum. Let's
consolidate around drm_output_color_format in drm_connector_hdmi_state
to facilitate the current effort to provide a global output format
selection mechanism.
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260305-drm-rework-color-formats-v3-14-f3935f6db579@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Now that we introduced a new drm_output_color_format enum to represent
what DRM_COLOR_FORMAT_* bits were representing, we can switch to the new
enum.
The main difference is that while DRM_COLOR_FORMAT_ was a bitmask,
drm_output_color_format is a proper enum. However, the enum was done is
such a way than DRM_COLOR_FORMAT_X = BIT(DRM_OUTPUT_COLOR_FORMAT_X) so
the transitition is easier.
The only thing we need to consider is if the original code meant to use
that value as a bitmask, in which case we do need to keep the bit shift,
or as a discriminant in which case we don't.
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260305-drm-rework-color-formats-v3-3-f3935f6db579@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
The DP tunnel implementation relies on a drm_private_obj, that is
initialized by allocating and initializing a state, and then passing it
to drm_private_obj_init.
Since we're gradually moving away from that pattern to the more
established one relying on a atomic_create_state implementation, let's
migrate this instance to the new pattern.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260128-drm-private-obj-reset-v4-6-90891fa3d3b0@redhat.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The DP MST implementation relies on a drm_private_obj, that is
initialized by allocating and initializing a state, and then passing it
to drm_private_obj_init.
Since we're gradually moving away from that pattern to the more
established one relying on a atomic_create_state implementation, let's
migrate this instance to the new pattern.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260128-drm-private-obj-reset-v4-5-90891fa3d3b0@redhat.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
When multiple bridges are present, EDID detection capability
(DRM_BRIDGE_OP_EDID) takes precedence over modes detection
(DRM_BRIDGE_OP_MODES). To ensure the above two capabilities are
determined by the last bridge in the chain, we handle three cases:
Case 1: The later bridge declares only DRM_BRIDGE_OP_MODES
- If the previous bridge declares DRM_BRIDGE_OP_EDID, set
&drm_bridge_connector.bridge_edid to NULL and set
&drm_bridge_connector.bridge_modes to the later bridge.
- Ensure modes detection capability of the later bridge will not
be ignored.
Case 2: The later bridge declares only DRM_BRIDGE_OP_EDID
- If the previous bridge declares DRM_BRIDGE_OP_MODES, set
&drm_bridge_connector.bridge_modes to NULL and set
&drm_bridge_connector.bridge_edid to the later bridge.
- Although EDID detection capability has higher priority, this
operation is for balance and makes sense.
Case 3: the later bridge declares both of them
- Assign later bridge as &drm_bridge_connector.bridge_edid and
and &drm_bridge_connector.bridge_modes to this bridge.
- Just leave transfer of these two capabilities as before.
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Heiko Stuebner <heiko@sntech.de> (on rk3588)
Link: https://patch.msgid.link/20251217093321.3108939-2-damon.ding@rock-chips.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
There are DRM_BRIDGE_OP_HDMI_AUDIO bridges (e.g. Lontium LT9611UXC)
which don't implement DRM_BRIDGE_OP_HDMI and don't implement
hdmi_clear_audio_infoframe / hdmi_write_audio_infoframe callbacks.
Move corresponding checks under the DRM_BRIDGE_OP_HDMI condition, making
sure that we require those callbacks only from the bridges which are
actually going to use them.
Fixes: b626b1a1c9 ("drm/bridge: refactor HDMI InfoFrame callbacks")
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260126-drm-fix-lt9611uxc-v1-1-04a635a8f5cf@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Havign a single set of InfoFrame callbacks doesn't provide enough
information to the DRM framework about the InfoFrame types that are
actually supported. Also it's not really future-proof: it provides a way
to program only a single Vendor-Specific frame, however we might need to
support multiple VSIs at the same time (e.g. HDMI vs HDMI Forum
VSIs).
Provide separate sets of callbacks, one per the InfoFrame type.
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260107-limit-infoframes-2-v4-6-213d0d3bd490@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Having only a single set of callbacks, hdmi_clear_infoframe and
hdmi_write_infoframe, bridge drivers don't have an easy way to signal to
the DRM framework, which InfoFrames are actually supported by the
hardware and by the driver and which are not. Also, it makes it
extremely easy for HDMI bridge drivers to skip implementing the
seemingly required InfoFrames (e.g. HDMI VSI). Last, but not least,
those callbacks take a single 'type' parameter, which makes it
impossible to implement support for multiple VSIs (which will be
required once we start working on HDMI Forum VSI).
Split the callbacks into a per-InfoFrame-kind pairs, letting the bridge
drivers actually signal supported features. The implementation follows
the overall drm_bridge design, where the bridge has a single
drm_bridge_funcs implementation and signals, which functions are to be
called using the drm_bridge->ops flags.
The AVI and HDMI VSI are assumed to be required for a normal HDMI
operation (with the drivers getting a drm_warn_once() stub
implementation if one is missing). The Audio InfoFrame is handled by the
existing DRM_BRIDGE_OP_HDMI_AUDIO, while the SPD and HDR DRM InfoFrames
got new drm_bridge_ops values.
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260107-limit-infoframes-2-v4-5-213d0d3bd490@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
drm-misc-next for 6.20:
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
- draw: Add API to check if a format conversion can be done
- panic: Rename draw_panic_static_* to draw_panic_screen_*, Add kunit
tests
- shmem: Improve tests
Driver Changes:
- ast: Big endian fixes
- etnaviv: Add PPU flop reset support
- panfrost: Add GPU_PM_RT support for RZ/G3E SoC
- panthor: multiple fixes around VM termination, huge page support
- pl111: Fix build regression
- v3d: Fix DMA segment size
- bridge:
- Add connector argument to .hpd_notify
- Plenty of patches to convert existing drivers to refcounting
- Convert Rockchip's inno hdmi support to a proper bridge
- lontium-lt9611uxc: Switch to HDMI audio helpers
- panel:
- New panel: BOE NV140WUM-T08
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patch.msgid.link/20260108-literate-nyala-of-courtesy-de501a@houat
Beyond Display related:
- Switch to use kernel standard fault injection in i915 (Juha-Pekka)
Display uAPI related:
- Display uapi vs. hw state fixes (Ville)
- Expose sharpness only if num_scalers is >= 2 (Nemesa)
Display related:
- More display driver refactor and clean-ups, specially towards separation (Jani)
- Add initial support Xe3p_LPD for NVL (Gustavo, Sai, )
- BMG FBC W/a (Vinod)
- RPM fix (Dibin)
- Add MTL+ platforms to support dpll framework (Mika, Imre)
- Other PLL related fixes (Imre)
- Fix DIMM_S DRAM decoding on ICL (Ville)
- Async flip refactor (Ville, Jouni)
- Go back to using AUX interrupts (Ville)
- Reduce severity of failed DII FEC enabling (Grzelak)
- Enable system cache support for FBC (Vinod)
- Move PSR/Panel Replay sink data into intel_connector and other PSR changes (Jouni)
- Detect AuxCCS support via display parent interface (Tvrtko)
- Clean up link BW/DSC slice config computation(Imre)
- Toggle powerdown states for C10 on HDMI (Gustavo)
- Add parent interface for PC8 forcewake tricks (Ville)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/aUW3bVDdE63aSFOJ@intel.com
drm-misc-next for v6.19-rc1:
UAPI Changes:
- Add userptr support to ivpu.
- Add IOCTL's for resource and telemetry data in amdxdna.
Core Changes:
- Improve some atomic state checking handling.
- drm/client updates.
- Use forward declarations instead of including drm_print.h
- RUse allocation flags in ttm_pool/device_init and allow specifying max
useful pool size and propagate ENOSPC.
- Updates and fixes to scheduler and bridge code.
- Add support for quirking DisplayID checksum errors.
Driver Changes:
- Assorted cleanups and fixes in rcar-du, accel/ivpu, panel/nv3052cf,
sti, imxm, accel/qaic, accel/amdxdna, imagination, tidss, sti,
panthor, vkms.
- Add Samsung S6E3FC2X01 DDIC/AMS641RW, Synaptics TDDI series DSI,
TL121BVMS07-00 (IL79900A) panels.
- Add mali MediaTek MT8196 SoC gpu support.
- Add etnaviv GC8000 Nano Ultra VIP r6205 support.
- Document powervr ge7800 support in the devicetree.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/5afae707-c9aa-4a47-b726-5e1f1aa7a106@linux.intel.com
Maxime Ripard
Kees CookandLinus Torvalds
Thomas Zimmermann
Damon DingandLuca Ceresoli
Dmitry Baryshkov
Dave Airlie
Imre Deak
Suraj Kandpal