mirror of
https://github.com/linux-msm/laptops-kernel.git
synced 2026-08-13 14:19:53 -07:00
master
740
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 Linus Torvalds
|
40286d6379 |
Merge tag 'pci-v7.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Allow TLP Processing Hints to be enabled for RCiEPs (George Abraham
P)
- Enable AtomicOps only if we know the Root Port supports them (Gerd
Bayer)
- Don't enable AtomicOps for RCiEPs since none of them need Atomic
Ops and we can't tell whether the Root Complex would support them
(Gerd Bayer)
- Leave Precision Time Measurement disabled until a driver enables it
to avoid PCIe errors (Mika Westerberg)
- Make pci_set_vga_state() fail if bridge doesn't support VGA
routing, i.e., PCI_BRIDGE_CTL_VGA is not writable, and return
errors to vga_get() callers including userspace via
/dev/vga_arbiter (Simon Richter)
- Validate max-link-speed from DT in j721e, brcmstb, mediatek-gen3,
rzg3s drivers (where the actual controller constraints are known),
and remove validation from the generic OF DT accessor (Hans Zhang)
- Remove pc110pad driver (no longer useful after 486 CPU support
removed) and no_pci_devices() (pc110pad was the last user) (Dmitry
Torokhov, Heiner Kallweit)
Resource management:
- Prevent assigning space to unimplemented bridge windows; previously
we mistakenly assumed prefetchable window existed and assigned
space and put a BAR there (Ahmed Naseef)
- Avoid shrinking bridge windows to fit in the initial Root Port
window; fixes one problem with devices with large BARs connected
via switches, e.g., Thunderbolt (Ilpo Järvinen)
- Pass full extent of empty space, not just the aligned space, to
resource_alignf callback so free space before the requested
alignment can be used (Ilpo Järvinen)
- Place small resources before larger ones for better utilization of
address space (Ilpo Järvinen)
- Fix alignment calculation for resource size larger than align,
e.g., bridge windows larger than the 1MB required alignment (Ilpo
Järvinen)
Reset:
- Update slot handling so all ARI functions are treated as being in
the same slot. They're all reset by Secondary Bus Reset, but
previously drivers of ARI functions that appeared to be on a
non-zero device weren't notified and fatal hardware errors could
result (Keith Busch)
- Make sysfs reset_subordinate hotplug safe to avoid spurious hotplug
events (Keith Busch)
- Hide Secondary Bus Reset ('bus') from sysfs reset_methods if masked
by CXL because it has no effect (Vidya Sagar)
- Avoid FLR for AMD NPU device, where it causes the device to hang
(Lizhi Hou)
Error handling:
- Clear only error bits in PCIe Device Status to avoid accidentally
clearing Emergency Power Reduction Detected (Shuai Xue)
- Check for AER errors even in devices without drivers (Lukas Wunner)
- Initialize ratelimit info so DPC and EDR paths log AER error
information (Kuppuswamy Sathyanarayanan)
Power control:
- Add UPD720201/UPD720202 USB 3.0 xHCI Host Controller .compatible so
generic pwrctrl driver can control it (Neil Armstrong)
Hotplug:
- Set LED_HW_PLUGGABLE for NPEM hotplug-capable ports so LED core
doesn't complain when setting brightness fails because the endpoint
is gone (Richard Cheng)
Peer-to-peer DMA:
- Allow wildcards in list of host bridges that support peer-to-peer
DMA between hierarchy domains and add all Google SoCs (Jacob
Moroni)
Endpoint framework:
- Advertise dynamic inbound mapping support in pci-epf-test and
update host pci_endpoint_test to skip doorbell testing if not
advertised by endpoint (Koichiro Den)
- Return 0, not remaining timeout, when MHI eDMA ops complete so
mhi_ep_ring_add_element() doesn't interpret non-zero as failure
(Daniel Hodges)
- Remove vntb and ntb duplicate resource teardown that leads to oops
when .allow_link() fails or .drop_link() is called (Koichiro Den)
- Disable vntb delayed work before clearing BAR mappings and
doorbells to avoid oops caused by doing the work after resources
have been torn down (Koichiro Den)
- Add a way to describe reserved subregions within BARs, e.g.,
platform-owned fixed register windows, and use it for the RK3588
BAR4 DMA ctrl window (Koichiro Den)
- Add BAR_DISABLED for BARs that will never be available to an EPF
driver, and change some BAR_RESERVED annotations to BAR_DISABLED
(Niklas Cassel)
- Add NTB .get_dma_dev() callback for cases where DMA API requires a
different device, e.g., vNTB devices (Koichiro Den)
- Add reserved region types for MSI-X Table and PBA so Endpoint
controllers can them as describe hardware-owned regions in a
BAR_RESERVED BAR (Manikanta Maddireddy)
- Make Tegra194/234 BAR0 programmable and remove 1MB size limit
(Manikanta Maddireddy)
- Expose Tegra BAR2 (MSI-X) and BAR4 (DMA) as 64-bit BAR_RESERVED
(Manikanta Maddireddy)
- Add Tegra194 and Tegra234 device table entries to pci_endpoint_test
(Manikanta Maddireddy)
- Skip the BAR subrange selftest if there are not enough inbound
window resources to run the test (Christian Bruel)
New native PCIe controller drivers:
- Add DT binding and driver for Andes QiLai SoC PCIe host controller
(Randolph Lin)
- Add DT binding and driver for ESWIN PCIe Root Complex (Senchuan
Zhang)
Baikal T-1 PCIe controller driver:
- Remove driver since it never quite became usable (Andy Shevchenko)
Cadence PCIe controller driver:
- Implement byte/word config reads with dword (32-bit) reads because
some Cadence controllers don't support sub-dword accesses (Aksh
Garg)
CIX Sky1 PCIe controller driver:
- Add 'power-domains' to DT binding for SCMI power domain (Gary Yang)
Freescale i.MX6 PCIe controller driver:
- Add i.MX94 and i.MX943 to fsl,imx6q-pcie-ep DT binding (Richard
Zhu)
- Delay instead of polling for L2/L3 Ready after PME_Turn_off when
suspending i.MX6SX because LTSSM registers are inaccessible
(Richard Zhu)
- Separate PERST# assertion (for resetting endpoints) from core reset
(for resetting the RC itself) to prepare for new DTs with PERST#
GPIO in per-Root Port nodes (Sherry Sun)
- Retain Root Port MSI capability on i.MX7D, i.MX8MM, and i.MX8MQ so
MSI from downstream devices will work (Richard Zhu)
- Fix i.MX95 reference clock source selection when internal refclk is
used (Franz Schnyder)
Freescale Layerscape PCIe controller driver:
- Allow building as a removable module (Sascha Hauer)
MediaTek PCIe Gen3 controller driver:
- Use dev_err_probe() to simplify error paths and make deferred probe
messages visible in /sys/kernel/debug/devices_deferred (Chen-Yu
Tsai)
- Power off device if setup fails (Chen-Yu Tsai)
- Integrate new pwrctrl API to enable power control for WiFi/BT
adapters on mainboard or in PCIe or M.2 slots (Chen-Yu Tsai)
NVIDIA Tegra194 PCIe controller driver:
- Poll less aggressively and non-atomically for PME_TO_Ack during
transition to L2 (Vidya Sagar)
- Disable LTSSM after transition to Detect on surprise link down to
stop toggling between Polling and Detect (Manikanta Maddireddy)
- Don't force the device into the D0 state before L2 when suspending
or shutting down the controller (Vidya Sagar)
- Disable PERST# IRQ only in Endpoint mode because it's not
registered in Root Port mode (Manikanta Maddireddy)
- Handle 'nvidia,refclk-select' as optional (Vidya Sagar)
- Disable direct speed change in Endpoint mode so link speed change
is controlled by the host (Vidya Sagar)
- Set LTR values before link up to avoid bogus LTR messages with 0
latency (Vidya Sagar)
- Allow system suspend when the Endpoint link is down (Vidya Sagar)
- Use DWC IP core version, not Tegra custom values, to avoid DWC core
version check warnings (Manikanta Maddireddy)
- Apply ECRC workaround to devices based on DesignWare 5.00a as well
as 4.90a (Manikanta Maddireddy)
- Disable PM Substate L1.2 in Endpoint mode to work around Tegra234
erratum (Vidya Sagar)
- Delay post-PERST# cleanup until core is powered on to avoid CBB
timeout (Manikanta Maddireddy)
- Assert CLKREQ# so switches that forward it to their downstream side
can bring up those links successfully (Vidya Sagar)
- Calibrate pipe to UPHY for Endpoint mode to reset stale PLL state
from any previous bad link state (Vidya Sagar)
- Remove IRQF_ONESHOT flag from Endpoint interrupt registration so
DMA driver and Endpoint controller driver can share the interrupt
line (Vidya Sagar)
- Enable DMA interrupt to support DMA in both Root Port and Endpoint
modes (Vidya Sagar)
- Enable hardware link retraining after link goes down in Endpoint
mode (Vidya Sagar)
- Add DT binding and driver support for core clock monitoring (Vidya
Sagar)
Qualcomm PCIe controller driver:
- Advertise 'Hot-Plug Capable' and set 'No Command Completed Support'
since Qcom Root Ports support hotplug events like DL_Up/Down and
can accept writes to Slot Control without delays between writes
(Krishna Chaitanya Chundru)
Renesas R-Car PCIe controller driver:
- Mark Endpoint BAR0 and BAR2 as Resizable (Koichiro Den)
- Reduce EPC BAR alignment requirement to 4K (Koichiro Den)
Renesas RZ/G3S PCIe controller driver:
- Add RZ/G3E to DT binding and to driver (John Madieu)
- Assert (not deassert) resets in probe error path (John Madieu)
- Assert resets in suspend path in reverse order they were deasserted
during probe (John Madieu)
- Rework inbound window algorithm to prevent mapping more than
intended region and enforce alignment on size, to prepare for
RZ/G3E support (John Madieu)
Rockchip DesignWare PCIe controller driver:
- Add tracepoints for PCIe controller LTSSM transitions and link rate
changes (Shawn Lin)
- Trace LTSSM events collected by the dw-rockchip debug FIFO (Shawn
Lin)
SOPHGO PCIe controller driver:
- Disable ASPM L0s and L1 on Sophgo 2042 PCIe Root Ports that
advertise support for them (Yao Zi)
Synopsys DesignWare PCIe controller driver:
- Continue with system suspend even if an Endpoint doesn't respond
with PME_TO_Ack message (Manivannan Sadhasivam)
- Set Endpoint MSI-X Table Size in the correct function of a
multi-function device when configuring MSI-X, not in Function 0
(Aksh Garg)
- Set Max Link Width and Max Link Speed for all functions of a
multi-function device, not just Function 0 (Aksh Garg)
- Expose PCIe event counters in groups 5-7 in debugfs (Hans Zhang)
Miscellaneous:
- Warn only once about invalid ACS kernel parameter format (Richard
Cheng)
- Suppress FW_BUG warning when writing sysfs 'numa_node' with the
current value (Li RongQing)
- Drop redundant 'depends on PCI' from Kconfig (Julian Braha)"
* tag 'pci-v7.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (165 commits)
PCI/P2PDMA: Add Google SoCs to the P2P DMA host bridge list
PCI/P2PDMA: Allow wildcard Device IDs in host bridge list
PCI: sg2042: Avoid L0s and L1 on Sophgo 2042 PCIe Root Ports
PCI: cadence: Add flags for disabling ASPM capability for broken Root Ports
PCI: tegra194: Add core monitor clock support
dt-bindings: PCI: tegra194: Add monitor clock support
PCI: tegra194: Enable hardware hot reset mode in Endpoint mode
PCI: tegra194: Enable DMA interrupt
PCI: tegra194: Remove IRQF_ONESHOT flag during Endpoint interrupt registration
PCI: tegra194: Calibrate pipe to UPHY for Endpoint mode
PCI: tegra194: Assert CLKREQ# explicitly by default
PCI: tegra194: Fix CBB timeout caused by DBI access before core power-on
PCI: tegra194: Disable L1.2 capability of Tegra234 EP
PCI: dwc: Apply ECRC workaround to DesignWare 5.00a as well
PCI: tegra194: Use DWC IP core version
PCI: tegra194: Free up Endpoint resources during remove()
PCI: tegra194: Allow system suspend when the Endpoint link is not up
PCI: tegra194: Set LTR message request before PCIe link up in Endpoint mode
PCI: tegra194: Disable direct speed change for Endpoint mode
PCI: tegra194: Use devm_gpiod_get_optional() to parse "nvidia,refclk-select"
...
|
||
  Ilpo JärvinenandBjorn Helgaas
|
9036bd0efc |
PCI: Align head space better
When a bridge window contains big and small resource(s), the small resource(s) may not amount to the half of the size of the big resource which would allow calculate_head_align() to shrink the head alignment. This results in always placing the small resource(s) after the big resource. In general, it would be good to be able to place the small resource(s) before the big resource to achieve better utilization of the address space. In the cases where the large resource can only fit at the end of the window, it is even required. However, carrying the information over from pbus_size_mem() and calculate_head_align() to __pci_assign_resource() and pcibios_align_resource() is not easy with the current data structures. A somewhat hacky way to move the non-aligning tail part to the head is possible within pcibios_align_resource(). The free space between the start of the free space span and the aligned start address can be compared with the non-aligning remainder of the size. If the free space is larger than the remainder, placing the remainder before the start address is possible. This relocation should generally work, because PCI resources consist only power-of-2 atoms. Various arch requirements may still need to override the relocation, so the relocation is only applied selectively in such cases. Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221205 Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Xifer <xiferdev@gmail.com> Link: https://patch.msgid.link/20260324165633.4583-10-ilpo.jarvinen@linux.intel.com |
||
|
Ilpo JärvinenandBjorn Helgaas
|
4dd6e1aa35 |
m68k/PCI: Remove unnecessary second application of align
Aligning res->start by align inside pcibios_align_resource() is unnecessary because caller of pcibios_align_resource() is __find_resource_space() that aligns res->start with align before calling pcibios_align_resource(). Aligning by align in case of IORESOURCE_IO && start & 0x300 cannot ever result in changing start either because 0x300 bits would have not survived the earlier alignment if align was large enough to have an impact. Thus, remove the duplicated aligning from pcibios_align_resource(). Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Greg Ungerer <gerg@linux-m68k.org> Link: https://patch.msgid.link/20260324165633.4583-6-ilpo.jarvinen@linux.intel.com |
||
|
Ilpo JärvinenandBjorn Helgaas
|
f699bcc8bc |
resource: Pass full extent of empty space to resource_alignf callback
__find_resource_space() calculates the full extent of empty space but only passes the aligned space to resource_alignf callback. In some situations, the callback may choose take advantage of the free space before the requested alignment. Pass the full extent of the calculated empty space to resource_alignf callback as an additional parameter. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Xifer <xiferdev@gmail.com> Link: https://patch.msgid.link/20260324165633.4583-3-ilpo.jarvinen@linux.intel.com |
||
 Nathan Chancellor
|
8678591b47 |
kbuild: Split .modinfo out from ELF_DETAILS
Commit |
||
  Thomas GleixnerandPeter Zijlstra
|
99d2592023 |
rseq: Implement sys_rseq_slice_yield()
Provide a new syscall which has the only purpose to yield the CPU after the kernel granted a time slice extension. sched_yield() is not suitable for that because it unconditionally schedules, but the end of the time slice extension is not required to schedule when the task was already preempted. This also allows to have a strict check for termination to catch user space invoking random syscalls including sched_yield() from a time slice extension region. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://patch.msgid.link/20251215155708.929634896@linutronix.de |
||
 Christian Brauner
|
b36d4b6aa8 |
arch: hookup listns() system call
Add the listns() system call to all architectures. Link: https://patch.msgid.link/20251029-work-namespace-nstree-listns-v4-20-2e6f823ebdc0@kernel.org Tested-by: syzbot@syzkaller.appspotmail.com Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
Linus Torvalds
|
2f2c725493 |
Merge tag 'pci-v6.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Add PCI_FIND_NEXT_CAP() and PCI_FIND_NEXT_EXT_CAP() macros that
take config space accessor functions.
Implement pci_find_capability(), pci_find_ext_capability(), and
dwc, dwc endpoint, and cadence capability search interfaces with
them (Hans Zhang)
- Leave parent unit address 0 in 'interrupt-map' so that when we
build devicetree nodes to describe PCI functions that contain
multiple peripherals, we can build this property even when
interrupt controllers lack 'reg' properties (Lorenzo Pieralisi)
- Add a Xeon 6 quirk to disable Extended Tags and limit Max Read
Request Size to 128B to avoid a performance issue (Ilpo Järvinen)
- Add sysfs 'serial_number' file to expose the Device Serial Number
(Matthew Wood)
- Fix pci_acpi_preserve_config() memory leak (Nirmoy Das)
Resource management:
- Align m68k pcibios_enable_device() with other arches (Ilpo
Järvinen)
- Remove sparc pcibios_enable_device() implementations that don't do
anything beyond what pci_enable_resources() does (Ilpo Järvinen)
- Remove mips pcibios_enable_resources() and use
pci_enable_resources() instead (Ilpo Järvinen)
- Clean up bridge window sizing and assignment (Ilpo Järvinen),
including:
- Leave non-claimed bridge windows disabled
- Enable bridges even if a window wasn't assigned because not all
windows are required by downstream devices
- Preserve bridge window type when releasing the resource, since
the type is needed for reassignment
- Consolidate selection of bridge windows into two new
interfaces, pbus_select_window() and
pbus_select_window_for_type(), so this is done consistently
- Compute bridge window start and end earlier to avoid logging
stale information
MSI:
- Add quirk to disable MSI on RDC PCI to PCIe bridges (Marcos Del Sol
Vives)
Error handling:
- Align AER with EEH by allowing drivers to request a Bus Reset on
Non-Fatal Errors (in addition to the reset on Fatal Errors that we
already do) (Lukas Wunner)
- If error recovery fails, emit FAILED_RECOVERY uevents for the
devices, not for the bridge leading to them.
This makes them correspond to BEGIN_RECOVERY uevents (Lukas Wunner)
- Align AER with EEH by calling err_handler.error_detected()
callbacks to notify drivers if error recovery fails (Lukas Wunner)
- Align AER with EEH by restoring device error_state to
pci_channel_io_normal before the err_handler.slot_reset() callback.
This is earlier than before the err_handler.resume() callback
(Lukas Wunner)
- Emit a BEGIN_RECOVERY uevent when driver's
err_handler.error_detected() requests a reset, as well as when it
says recovery is complete or can be done without a reset (Niklas
Schnelle)
- Align s390 with AER and EEH by emitting uevents during error
recovery (Niklas Schnelle)
- Align EEH with AER and s390 by emitting BEGIN_RECOVERY,
SUCCESSFUL_RECOVERY, or FAILED_RECOVERY uevents depending on the
result of err_handler.error_detected() (Niklas Schnelle)
- Fix a NULL pointer dereference in aer_ratelimit() when ACPI GHES
error information identifies a device without an AER Capability
(Breno Leitao)
- Update error decoding and TLP Log printing for new errors in
current PCIe base spec (Lukas Wunner)
- Update error recovery documentation to match the current code
and use consistent nomenclature (Lukas Wunner)
ASPM:
- Enable all ClockPM and ASPM states for devicetree platforms, since
there's typically no firmware that enables ASPM
This is a risky change that may uncover hardware or configuration
defects at boot-time rather than when users enable ASPM via sysfs
later. Booting with "pcie_aspm=off" prevents this enabling
(Manivannan Sadhasivam)
- Remove the qcom code that enabled ASPM (Manivannan Sadhasivam)
Power management:
- If a device has already been disconnected, e.g., by a hotplug
removal, don't bother trying to resume it to D0 when detaching the
driver.
This avoids annoying "Unable to change power state from D3cold to
D0" messages (Mario Limonciello)
- Ensure devices are powered up before config reads for
'max_link_width', 'current_link_speed', 'current_link_width',
'secondary_bus_number', and 'subordinate_bus_number' sysfs files.
This prevents using invalid data (~0) in drivers or lspci and,
depending on how the PCIe controller reports errors, may avoid
error interrupts or crashes (Brian Norris)
Virtualization:
- Add rescan/remove locking when enabling/disabling SR-IOV, which
avoids list corruption on s390, where disabling SR-IOV also
generates hotplug events (Niklas Schnelle)
Peer-to-peer DMA:
- Free struct p2p_pgmap, not a member within it, in the
pci_p2pdma_add_resource() error path (Sungho Kim)
Endpoint framework:
- Document sysfs interface for BAR assignment of vNTB endpoint
functions (Jerome Brunet)
- Fix array underflow in endpoint BAR test case (Dan Carpenter)
- Skip endpoint IRQ test if the IRQ is out of range to avoid false
errors (Christian Bruel)
- Fix endpoint test case for controllers with fixed-size BARs smaller
than requested by the test (Marek Vasut)
- Restore inbound translation when disabling doorbell so the endpoint
doorbell test case can be run more than once (Niklas Cassel)
- Avoid a NULL pointer dereference when releasing DMA channels in
endpoint DMA test case (Shin'ichiro Kawasaki)
- Convert tegra194 interrupt number to MSI vector to fix endpoint
Kselftest MSI_TEST test case (Niklas Cassel)
- Reset tegra194 BARs when running in endpoint mode so the BAR tests
don't overwrite the ATU settings in BAR4 (Niklas Cassel)
- Handle errors in tegra194 BPMP transactions so we don't mistakenly
skip future PERST# assertion (Vidya Sagar)
AMD MDB PCIe controller driver:
- Update DT binding example to separate PERST# to a Root Port stanza
to make multiple Root Ports possible in the future (Sai Krishna
Musham)
- Add driver support for PERST# being described in a Root Port
stanza, falling back to the host bridge if not found there (Sai
Krishna Musham)
Freescale i.MX6 PCIe controller driver:
- Enable the 3.3V Vaux supply if available so devices can request
wakeup with either Beacon or WAKE# (Richard Zhu)
MediaTek PCIe Gen3 controller driver:
- Add optional sys clock ready time setting to avoid sys_clk_rdy
signal glitching in MT6991 and MT8196 (AngeloGioacchino Del Regno)
- Add DT binding and driver support for MT6991 and MT8196
(AngeloGioacchino Del Regno)
NVIDIA Tegra PCIe controller driver:
- When asserting PERST#, disable the controller instead of mistakenly
disabling the PLL twice (Nagarjuna Kristam)
- Convert struct tegra_msi mask_lock to raw spinlock to avoid a lock
nesting error (Marek Vasut)
Qualcomm PCIe controller driver:
- Select PCI Power Control Slot driver so slot voltage rails can be
turned on/off if described in Root Port devicetree node (Qiang Yu)
- Parse only PCI bridge child nodes in devicetree, skipping unrelated
nodes such as OPP (Operating Performance Points), which caused
probe failures (Krishna Chaitanya Chundru)
- Add 8.0 GT/s and 32.0 GT/s equalization settings (Ziyue Zhang)
- Consolidate Root Port 'phy' and 'reset' properties in struct
qcom_pcie_port, regardless of whether we got them from the Root
Port node or the host bridge node (Manivannan Sadhasivam)
- Fetch and map the ELBI register space in the DWC core rather than
in each driver individually (Krishna Chaitanya Chundru)
- Enable ECAM mechanism in DWC core by setting up iATU with 'CFG
Shift Feature' and use this in the qcom driver (Krishna Chaitanya
Chundru)
- Add SM8750 compatible to qcom,pcie-sm8550.yaml (Krishna Chaitanya
Chundru)
- Update qcom,pcie-x1e80100.yaml to allow fifth PCIe host on Qualcomm
Glymur, which is compatible with X1E80100 but doesn't have the
cnoc_sf_axi clock (Qiang Yu)
Renesas R-Car PCIe controller driver:
- Fix a typo that prevented correct PHY initialization (Marek Vasut)
- Add a missing 1ms delay after PWR reset assertion as required by
the V4H manual (Marek Vasut)
- Assure reset has completed before DBI access to avoid SError (Marek
Vasut)
- Fix inverted PHY initialization check, which sometimes led to
timeouts and failure to start the controller (Marek Vasut)
- Pass the correct IRQ domain to generic_handle_domain_irq() to fix a
regression when converting to msi_create_parent_irq_domain()
(Claudiu Beznea)
- Drop the spinlock protecting the PMSR register - it's no longer
required since pci_lock already serializes accesses (Marek Vasut)
- Convert struct rcar_msi mask_lock to raw spinlock to avoid a lock
nesting error (Marek Vasut)
SOPHGO PCIe controller driver:
- Check for existence of struct cdns_pcie.ops before using it to
allow Cadence drivers that don't need to supply ops (Chen Wang)
- Add DT binding and driver for the SOPHGO SG2042 PCIe controller
(Chen Wang)
STMicroelectronics STM32MP25 PCIe controller driver:
- Update pinctrl documentation of initial states and use in runtime
suspend/resume (Christian Bruel)
- Add pinctrl_pm_select_init_state() for use by stm32 driver, which
needs it during resume (Christian Bruel)
- Add devicetree bindings and drivers for the STMicroelectronics
STM32MP25 in host and endpoint modes (Christian Bruel)
Synopsys DesignWare PCIe controller driver:
- Add support for x16 in devicetree 'num-lanes' property (Konrad
Dybcio)
- Verify that if DT specifies a single IRQ for all eDMA channels, it
is named 'dma' (Niklas Cassel)
TI J721E PCIe driver:
- Add MODULE_DEVICE_TABLE() so driver can be autoloaded (Siddharth
Vadapalli)
- Power controller off before configuring the glue layer so the
controller latches the correct values on power-on (Siddharth
Vadapalli)
TI Keystone PCIe controller driver:
- Use devm_request_irq() so 'ks-pcie-error-irq' is freed when driver
exits with error (Siddharth Vadapalli)
- Add Peripheral Virtualization Unit (PVU), which restricts DMA from
PCIe devices to specific regions of host memory, to the ti,am65
binding (Jan Kiszka)
Xilinx NWL PCIe controller driver:
- Clear bootloader E_ECAM_CONTROL before merging in the new driver
value to avoid writing invalid values (Jani Nurminen)"
* tag 'pci-v6.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (141 commits)
PCI/AER: Avoid NULL pointer dereference in aer_ratelimit()
MAINTAINERS: Add entry for ST STM32MP25 PCIe drivers
PCI: stm32-ep: Add PCIe Endpoint support for STM32MP25
dt-bindings: PCI: Add STM32MP25 PCIe Endpoint bindings
PCI: stm32: Add PCIe host support for STM32MP25
PCI: xilinx-nwl: Fix ECAM programming
PCI: j721e: Fix incorrect error message in probe()
PCI: keystone: Use devm_request_irq() to free "ks-pcie-error-irq" on exit
dt-bindings: PCI: qcom,pcie-x1e80100: Set clocks minItems for the fifth Glymur PCIe Controller
PCI: dwc: Support 16-lane operation
PCI: Add lockdep assertion in pci_stop_and_remove_bus_device()
PCI/IOV: Add PCI rescan-remove locking when enabling/disabling SR-IOV
PCI: rcar-host: Convert struct rcar_msi mask_lock into raw spinlock
PCI: tegra194: Rename 'root_bus' to 'root_port_bus' in tegra_pcie_downstream_dev_to_D0()
PCI: tegra: Convert struct tegra_msi mask_lock into raw spinlock
PCI: rcar-gen4: Fix inverted break condition in PHY initialization
PCI: rcar-gen4: Assure reset occurs before DBI access
PCI: rcar-gen4: Add missing 1ms delay after PWR reset assertion
PCI: Set up bridge resources earlier
PCI: rcar-host: Drop PMSR spinlock
...
|
||
|
Linus Torvalds
|
6c7340a7a8 |
Merge tag 'sched-core-2025-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Core scheduler changes:
- Make migrate_{en,dis}able() inline, to improve performance
(Menglong Dong)
- Move STDL_INIT() functions out-of-line (Peter Zijlstra)
- Unify the SCHED_{SMT,CLUSTER,MC} Kconfig (Peter Zijlstra)
Fair scheduling:
- Defer throttling to when tasks exit to user-space, to reduce the
chance & impact of throttle-preemption with held locks and other
resources (Aaron Lu, Valentin Schneider)
- Get rid of sched_domains_curr_level hack for tl->cpumask(), as the
warning was getting triggered on certain topologies (Peter
Zijlstra)
Misc cleanups & fixes:
- Header cleanups (Menglong Dong)
- Fix race in push_dl_task() (Harshit Agarwal)"
* tag 'sched-core-2025-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Fix some typos in include/linux/preempt.h
sched: Make migrate_{en,dis}able() inline
rcu: Replace preempt.h with sched.h in include/linux/rcupdate.h
arch: Add the macro COMPILE_OFFSETS to all the asm-offsets.c
sched/fair: Do not balance task to a throttled cfs_rq
sched/fair: Do not special case tasks in throttled hierarchy
sched/fair: update_cfs_group() for throttled cfs_rqs
sched/fair: Propagate load for throttled cfs_rq
sched/fair: Get rid of throttled_lb_pair()
sched/fair: Task based throttle time accounting
sched/fair: Switch to task based throttle model
sched/fair: Implement throttle task work and related helpers
sched/fair: Add related data structure for task based throttle
sched: Unify the SCHED_{SMT,CLUSTER,MC} Kconfig
sched: Move STDL_INIT() functions out-of-line
sched/fair: Get rid of sched_domains_curr_level hack for tl->cpumask()
sched/deadline: Fix race in push_dl_task()
|
||
 Menglong DongandPeter Zijlstra
|
35561bab76 |
arch: Add the macro COMPILE_OFFSETS to all the asm-offsets.c
The include/generated/asm-offsets.h is generated in Kbuild during compiling from arch/SRCARCH/kernel/asm-offsets.c. When we want to generate another similar offset header file, circular dependency can happen. For example, we want to generate a offset file include/generated/test.h, which is included in include/sched/sched.h. If we generate asm-offsets.h first, it will fail, as include/sched/sched.h is included in asm-offsets.c and include/generated/test.h doesn't exist; If we generate test.h first, it can't success neither, as include/generated/asm-offsets.h is included by it. In x86_64, the macro COMPILE_OFFSETS is used to avoid such circular dependency. We can generate asm-offsets.h first, and if the COMPILE_OFFSETS is defined, we don't include the "generated/test.h". And we define the macro COMPILE_OFFSETS for all the asm-offsets.c for this purpose. Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> |
||
|
Ilpo JärvinenandBjorn Helgaas
|
2657a0c982 |
m68k/PCI: Use pci_enable_resources() in pcibios_enable_device()
m68k has a resource enable (check) loop in its pcibios_enable_device()
which for some reason differs from pci_enable_resources(). This could lead
to inconsistencies in behavior, especially now as pci_enable_resources()
and the bridge window resource flags behavior are going to be altered by
upcoming changes.
The check for !r->start && r->end is already covered by the more generic
checks done in pci_enable_resources().
The entire pcibios_enable_device() suspiciously looks copy-paste from some
other arch as also indicated by the preceding comment. However, it also
enables PCI_COMMAND_IO | PCI_COMMAND_MEMORY always for bridges. It is not
clear why that is being done as the commit
|
||
 Simon SchusterandChristian Brauner
|
bbc46b23af |
arch: copy_thread: pass clone_flags as u64
With the introduction of clone3 in commit |
||
|
Linus Torvalds
|
3bb38c5271 |
Merge tag 'm68k-for-v6.17-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
Pull m68k updates from Geert Uytterhoeven: - ptdescs conversions - Fix lost column on the graphical debug console - Replace __ASSEMBLY__ with __ASSEMBLER__ in headers - Miscellaneous fixes and improvements - defconfig updates * tag 'm68k-for-v6.17-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: mac: Improve clocksource driver commentary m68k: defconfig: Update defconfigs for v6.16-rc2 m68k: Replace __ASSEMBLY__ with __ASSEMBLER__ in non-uapi headers m68k: Replace __ASSEMBLY__ with __ASSEMBLER__ in uapi headers m68k: Enable dead code elimination m68k: Don't unregister boot console needlessly m68k: Remove unused "cursor home" code from debug console m68k: Avoid pointless recursion in debug console rendering m68k: Fix lost column on framebuffer debug console m68k: mm: Convert pointer table macros to use ptdescs m68k: mm: Convert init_pointer_table() to use ptdescs m68k: mm: Convert free_pointer_table() to use ptdescs m68k: mm: Convert get_pointer_table() to use ptdescs |
||
|
Linus Torvalds
|
d900c4ce63 |
Merge tag 'execve-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull execve updates from Kees Cook: - Introduce regular REGSET note macros arch-wide (Dave Martin) - Remove arbitrary 4K limitation of program header size (Yin Fengwei) - Reorder function qualifiers for copy_clone_args_from_user() (Dishank Jogi) * tag 'execve-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (25 commits) fork: reorder function qualifiers for copy_clone_args_from_user binfmt_elf: remove the 4k limitation of program header size binfmt_elf: Warn on missing or suspicious regset note names xtensa: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names um: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names x86/ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names sparc: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names sh: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names s390/ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names riscv: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names powerpc/ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names parisc: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names openrisc: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names nios2: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names MIPS: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names m68k: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names LoongArch: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names hexagon: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names csky: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names arm64: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names ... |
||
  Dave MartinandKees Cook
|
e572168e8d |
m68k: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
Instead of having the core code guess the note name for each regset, use USER_REGSET_NOTE_TYPE() to pick the correct name from elf.h. Signed-off-by: Dave Martin <Dave.Martin@arm.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Kees Cook <kees@kernel.org> Cc: Akihiko Odaki <akihiko.odaki@daynix.com> Cc: linux-m68k@lists.linux-m68k.org Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Akihiko Odaki <odaki@rsg.ci.i.u-tokyo.ac.jp> Link: https://lore.kernel.org/r/20250701135616.29630-11-Dave.Martin@arm.com Signed-off-by: Kees Cook <kees@kernel.org> |
||
  Finn ThainandGeert Uytterhoeven
|
83f672a7f6 |
m68k: Don't unregister boot console needlessly
When MACH_IS_MVME147, the boot console calls mvme147_scc_write() to
generate console output. That will continue to work even after
debug_cons_nputs() becomes unavailable so there's no need to
unregister the boot console.
Take the opportunity to remove a repeated MACH_IS_* test. Use the
actual .write method (instead of a wrapper) and test that pointer
instead. This means adding an unused parameter to debug_cons_nputs() for
consistency with the struct console API.
early_printk.c is only built when CONFIG_EARLY_PRINTK=y. As of late,
head.S is only built when CONFIG_MMU_MOTOROLA=y. So let the former symbol
depend on the latter, to obviate some ifdef conditionals.
Cc: Daniel Palmer <daniel@0x0f.com>
Fixes:
|
||
|
Finn ThainandGeert Uytterhoeven
|
e911044c28 |
m68k: Remove unused "cursor home" code from debug console
The cursor home operation is unused and seems undesirable for logging. Remove it. The console_not_cr label actually means "not line feed and not carriage return either" so take the opportunity to replace it with something less confusing. Rectify some inconsistent whitespace while we're here. Signed-off-by: Finn Thain <fthain@linux-m68k.org> Tested-by: Stan Johnson <userm57@yahoo.com> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/ec2d443d3c3213028bbbab7c2e0382cd53db75fe.1743115195.git.fthain@linux-m68k.org Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> |
||
|
Finn ThainandGeert Uytterhoeven
|
0da6458417 |
m68k: Avoid pointless recursion in debug console rendering
The recursive call to console_putc to effect a carriage return is needlessly slow and complicated. Instead, just clear the column counter directly. Setup %a0 earlier to avoid a repeated comparison. Signed-off-by: Finn Thain <fthain@linux-m68k.org> Tested-by: Stan Johnson <userm57@yahoo.com> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/a6104f41918bed4fd17f92c45df94ac7a5d30e40.1743115195.git.fthain@linux-m68k.org Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> |
||
|
Finn ThainandGeert Uytterhoeven
|
210a1ce8ed |
m68k: Fix lost column on framebuffer debug console
Move the cursor position rightward after rendering the character,
not before. This avoids complications that arise when the recursive
console_putc call has to wrap the line and/or scroll the display.
This also fixes the linewrap bug that crops off the rightmost column.
When the cursor is at the bottom of the display, a linefeed will not
move the cursor position further downward. Instead, the display scrolls
upward. Avoid the repeated add/subtract sequence by way of a single
subtraction at the initialization of console_struct_num_rows.
Fixes:
|
||
 Andrey AlbershteynandChristian Brauner
|
be7efb2d20 |
fs: introduce file_getattr and file_setattr syscalls
Introduce file_getattr() and file_setattr() syscalls to manipulate inode extended attributes. The syscalls takes pair of file descriptor and pathname. Then it operates on inode opened accroding to openat() semantics. The struct file_attr is passed to obtain/change extended attributes. This is an alternative to FS_IOC_FSSETXATTR ioctl with a difference that file don't need to be open as we can reference it with a path instead of fd. By having this we can manipulated inode extended attributes not only on regular files but also on special ones. This is not possible with FS_IOC_FSSETXATTR ioctl as with special files we can not call ioctl() directly on the filesystem inode using fd. This patch adds two new syscalls which allows userspace to get/set extended inode attributes on special files by using parent directory and a path - *at() like syscall. CC: linux-api@vger.kernel.org CC: linux-fsdevel@vger.kernel.org CC: linux-xfs@vger.kernel.org Signed-off-by: Andrey Albershteyn <aalbersh@kernel.org> Link: https://lore.kernel.org/20250630-xattrat-syscall-v6-6-c4e3bc35227b@kernel.org Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
Linus Torvalds
|
8630c59e99 |
Merge tag 'kbuild-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Add support for the EXPORT_SYMBOL_GPL_FOR_MODULES() macro, which
exports a symbol only to specified modules
- Improve ABI handling in gendwarfksyms
- Forcibly link lib-y objects to vmlinux even if CONFIG_MODULES=n
- Add checkers for redundant or missing <linux/export.h> inclusion
- Deprecate the extra-y syntax
- Fix a genksyms bug when including enum constants from *.symref files
* tag 'kbuild-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (28 commits)
genksyms: Fix enum consts from a reference affecting new values
arch: use always-$(KBUILD_BUILTIN) for vmlinux.lds
kbuild: set y instead of 1 to KBUILD_{BUILTIN,MODULES}
efi/libstub: use 'targets' instead of extra-y in Makefile
module: make __mod_device_table__* symbols static
scripts/misc-check: check unnecessary #include <linux/export.h> when W=1
scripts/misc-check: check missing #include <linux/export.h> when W=1
scripts/misc-check: add double-quotes to satisfy shellcheck
kbuild: move W=1 check for scripts/misc-check to top-level Makefile
scripts/tags.sh: allow to use alternative ctags implementation
kconfig: introduce menu type enum
docs: symbol-namespaces: fix reST warning with literal block
kbuild: link lib-y objects to vmlinux forcibly even when CONFIG_MODULES=n
tinyconfig: enable CONFIG_LD_DEAD_CODE_DATA_ELIMINATION
docs/core-api/symbol-namespaces: drop table of contents and section numbering
modpost: check forbidden MODULE_IMPORT_NS("module:") at compile time
kbuild: move kbuild syntax processing to scripts/Makefile.build
Makefile: remove dependency on archscripts for header installation
Documentation/kbuild: Add new gendwarfksyms kABI rules
Documentation/kbuild: Drop section numbers
...
|
||
 Masahiro Yamada
|
e21efe833e |
arch: use always-$(KBUILD_BUILTIN) for vmlinux.lds
The extra-y syntax is deprecated. Instead, use always-$(KBUILD_BUILTIN), which behaves equivalently. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: Nicolas Schier <n.schier@avm.de> |
||
|
Linus Torvalds
|
df7b9b4f6b |
Merge tag 'm68knommu-for-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
Pull m68knommu updates from Greg Ungerer: - use new gpio line value settings - use strscpy() more * tag 'm68knommu-for-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68k: Replace memcpy() + manual NUL-termination with strscpy() m68k/kernel: replace strncpy() with strscpy() m68k: coldfire: gpio: use new line value setter callbacks |
||
  Thorsten BlumandGreg Ungerer
|
eb43efd062 |
m68k: Replace memcpy() + manual NUL-termination with strscpy()
Use strscpy() to safely copy the command-line string instead of memcpy() followed by a manual NUL-termination. The source string is also NUL-terminated and meets the __must_be_cstr() requirement of strscpy(). No functional changes intended. Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Signed-off-by: Greg Ungerer <gerg@linux-m68k.org> |
||
 Mohammad Mahdi AnbarakiandGreg Ungerer
|
245bb7b95a |
m68k/kernel: replace strncpy() with strscpy()
Swapped out strncpy() for strscpy() in parse_uboot_commandline() while copying to commandp. strscpy() makes sure the string is properly null- terminated and gives a more useful return value so it's just a safer choice overall. Link: https://github.com/KSPP/linux/issues/90 Signed-off-by: Mohammad Mahdi Anbaraki <m.mahdianbaraki@gmail.com> Signed-off-by: Greg Ungerer <gerg@linux-m68k.org> |