Pull ARM updates from Russell King:
- fix a race condition handling PG_dcache_clean
- further cleanups for the fault handling, allowing RT to be enabled
- fixing nzones validation in adfs filesystem driver
- fix for module unwinding
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux:
ARM: 9463/1: Allow to enable RT
ARM: 9472/1: fix race condition on PG_dcache_clean in __sync_icache_dcache()
ARM: 9471/1: module: fix unwind section relocation out of range error
fs/adfs: validate nzones in adfs_validate_bblk()
ARM: provide individual is_translation_fault() and is_permission_fault()
ARM: move FSR fault status definitions before fsr_fs()
ARM: use BIT() and GENMASK() for fault status register fields
ARM: move is_permission_fault() and is_translation_fault() to fault.h
ARM: move vmalloc() lazy-page table population
ARM: ensure interrupts are enabled in __do_user_fault()
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Allow TLP Processing Hints to be enabled for RCiEPs (George Abraham
P)
- Enable AtomicOps only if we know the Root Port supports them (Gerd
Bayer)
- Don't enable AtomicOps for RCiEPs since none of them need Atomic
Ops and we can't tell whether the Root Complex would support them
(Gerd Bayer)
- Leave Precision Time Measurement disabled until a driver enables it
to avoid PCIe errors (Mika Westerberg)
- Make pci_set_vga_state() fail if bridge doesn't support VGA
routing, i.e., PCI_BRIDGE_CTL_VGA is not writable, and return
errors to vga_get() callers including userspace via
/dev/vga_arbiter (Simon Richter)
- Validate max-link-speed from DT in j721e, brcmstb, mediatek-gen3,
rzg3s drivers (where the actual controller constraints are known),
and remove validation from the generic OF DT accessor (Hans Zhang)
- Remove pc110pad driver (no longer useful after 486 CPU support
removed) and no_pci_devices() (pc110pad was the last user) (Dmitry
Torokhov, Heiner Kallweit)
Resource management:
- Prevent assigning space to unimplemented bridge windows; previously
we mistakenly assumed prefetchable window existed and assigned
space and put a BAR there (Ahmed Naseef)
- Avoid shrinking bridge windows to fit in the initial Root Port
window; fixes one problem with devices with large BARs connected
via switches, e.g., Thunderbolt (Ilpo Järvinen)
- Pass full extent of empty space, not just the aligned space, to
resource_alignf callback so free space before the requested
alignment can be used (Ilpo Järvinen)
- Place small resources before larger ones for better utilization of
address space (Ilpo Järvinen)
- Fix alignment calculation for resource size larger than align,
e.g., bridge windows larger than the 1MB required alignment (Ilpo
Järvinen)
Reset:
- Update slot handling so all ARI functions are treated as being in
the same slot. They're all reset by Secondary Bus Reset, but
previously drivers of ARI functions that appeared to be on a
non-zero device weren't notified and fatal hardware errors could
result (Keith Busch)
- Make sysfs reset_subordinate hotplug safe to avoid spurious hotplug
events (Keith Busch)
- Hide Secondary Bus Reset ('bus') from sysfs reset_methods if masked
by CXL because it has no effect (Vidya Sagar)
- Avoid FLR for AMD NPU device, where it causes the device to hang
(Lizhi Hou)
Error handling:
- Clear only error bits in PCIe Device Status to avoid accidentally
clearing Emergency Power Reduction Detected (Shuai Xue)
- Check for AER errors even in devices without drivers (Lukas Wunner)
- Initialize ratelimit info so DPC and EDR paths log AER error
information (Kuppuswamy Sathyanarayanan)
Power control:
- Add UPD720201/UPD720202 USB 3.0 xHCI Host Controller .compatible so
generic pwrctrl driver can control it (Neil Armstrong)
Hotplug:
- Set LED_HW_PLUGGABLE for NPEM hotplug-capable ports so LED core
doesn't complain when setting brightness fails because the endpoint
is gone (Richard Cheng)
Peer-to-peer DMA:
- Allow wildcards in list of host bridges that support peer-to-peer
DMA between hierarchy domains and add all Google SoCs (Jacob
Moroni)
Endpoint framework:
- Advertise dynamic inbound mapping support in pci-epf-test and
update host pci_endpoint_test to skip doorbell testing if not
advertised by endpoint (Koichiro Den)
- Return 0, not remaining timeout, when MHI eDMA ops complete so
mhi_ep_ring_add_element() doesn't interpret non-zero as failure
(Daniel Hodges)
- Remove vntb and ntb duplicate resource teardown that leads to oops
when .allow_link() fails or .drop_link() is called (Koichiro Den)
- Disable vntb delayed work before clearing BAR mappings and
doorbells to avoid oops caused by doing the work after resources
have been torn down (Koichiro Den)
- Add a way to describe reserved subregions within BARs, e.g.,
platform-owned fixed register windows, and use it for the RK3588
BAR4 DMA ctrl window (Koichiro Den)
- Add BAR_DISABLED for BARs that will never be available to an EPF
driver, and change some BAR_RESERVED annotations to BAR_DISABLED
(Niklas Cassel)
- Add NTB .get_dma_dev() callback for cases where DMA API requires a
different device, e.g., vNTB devices (Koichiro Den)
- Add reserved region types for MSI-X Table and PBA so Endpoint
controllers can them as describe hardware-owned regions in a
BAR_RESERVED BAR (Manikanta Maddireddy)
- Make Tegra194/234 BAR0 programmable and remove 1MB size limit
(Manikanta Maddireddy)
- Expose Tegra BAR2 (MSI-X) and BAR4 (DMA) as 64-bit BAR_RESERVED
(Manikanta Maddireddy)
- Add Tegra194 and Tegra234 device table entries to pci_endpoint_test
(Manikanta Maddireddy)
- Skip the BAR subrange selftest if there are not enough inbound
window resources to run the test (Christian Bruel)
New native PCIe controller drivers:
- Add DT binding and driver for Andes QiLai SoC PCIe host controller
(Randolph Lin)
- Add DT binding and driver for ESWIN PCIe Root Complex (Senchuan
Zhang)
Baikal T-1 PCIe controller driver:
- Remove driver since it never quite became usable (Andy Shevchenko)
Cadence PCIe controller driver:
- Implement byte/word config reads with dword (32-bit) reads because
some Cadence controllers don't support sub-dword accesses (Aksh
Garg)
CIX Sky1 PCIe controller driver:
- Add 'power-domains' to DT binding for SCMI power domain (Gary Yang)
Freescale i.MX6 PCIe controller driver:
- Add i.MX94 and i.MX943 to fsl,imx6q-pcie-ep DT binding (Richard
Zhu)
- Delay instead of polling for L2/L3 Ready after PME_Turn_off when
suspending i.MX6SX because LTSSM registers are inaccessible
(Richard Zhu)
- Separate PERST# assertion (for resetting endpoints) from core reset
(for resetting the RC itself) to prepare for new DTs with PERST#
GPIO in per-Root Port nodes (Sherry Sun)
- Retain Root Port MSI capability on i.MX7D, i.MX8MM, and i.MX8MQ so
MSI from downstream devices will work (Richard Zhu)
- Fix i.MX95 reference clock source selection when internal refclk is
used (Franz Schnyder)
Freescale Layerscape PCIe controller driver:
- Allow building as a removable module (Sascha Hauer)
MediaTek PCIe Gen3 controller driver:
- Use dev_err_probe() to simplify error paths and make deferred probe
messages visible in /sys/kernel/debug/devices_deferred (Chen-Yu
Tsai)
- Power off device if setup fails (Chen-Yu Tsai)
- Integrate new pwrctrl API to enable power control for WiFi/BT
adapters on mainboard or in PCIe or M.2 slots (Chen-Yu Tsai)
NVIDIA Tegra194 PCIe controller driver:
- Poll less aggressively and non-atomically for PME_TO_Ack during
transition to L2 (Vidya Sagar)
- Disable LTSSM after transition to Detect on surprise link down to
stop toggling between Polling and Detect (Manikanta Maddireddy)
- Don't force the device into the D0 state before L2 when suspending
or shutting down the controller (Vidya Sagar)
- Disable PERST# IRQ only in Endpoint mode because it's not
registered in Root Port mode (Manikanta Maddireddy)
- Handle 'nvidia,refclk-select' as optional (Vidya Sagar)
- Disable direct speed change in Endpoint mode so link speed change
is controlled by the host (Vidya Sagar)
- Set LTR values before link up to avoid bogus LTR messages with 0
latency (Vidya Sagar)
- Allow system suspend when the Endpoint link is down (Vidya Sagar)
- Use DWC IP core version, not Tegra custom values, to avoid DWC core
version check warnings (Manikanta Maddireddy)
- Apply ECRC workaround to devices based on DesignWare 5.00a as well
as 4.90a (Manikanta Maddireddy)
- Disable PM Substate L1.2 in Endpoint mode to work around Tegra234
erratum (Vidya Sagar)
- Delay post-PERST# cleanup until core is powered on to avoid CBB
timeout (Manikanta Maddireddy)
- Assert CLKREQ# so switches that forward it to their downstream side
can bring up those links successfully (Vidya Sagar)
- Calibrate pipe to UPHY for Endpoint mode to reset stale PLL state
from any previous bad link state (Vidya Sagar)
- Remove IRQF_ONESHOT flag from Endpoint interrupt registration so
DMA driver and Endpoint controller driver can share the interrupt
line (Vidya Sagar)
- Enable DMA interrupt to support DMA in both Root Port and Endpoint
modes (Vidya Sagar)
- Enable hardware link retraining after link goes down in Endpoint
mode (Vidya Sagar)
- Add DT binding and driver support for core clock monitoring (Vidya
Sagar)
Qualcomm PCIe controller driver:
- Advertise 'Hot-Plug Capable' and set 'No Command Completed Support'
since Qcom Root Ports support hotplug events like DL_Up/Down and
can accept writes to Slot Control without delays between writes
(Krishna Chaitanya Chundru)
Renesas R-Car PCIe controller driver:
- Mark Endpoint BAR0 and BAR2 as Resizable (Koichiro Den)
- Reduce EPC BAR alignment requirement to 4K (Koichiro Den)
Renesas RZ/G3S PCIe controller driver:
- Add RZ/G3E to DT binding and to driver (John Madieu)
- Assert (not deassert) resets in probe error path (John Madieu)
- Assert resets in suspend path in reverse order they were deasserted
during probe (John Madieu)
- Rework inbound window algorithm to prevent mapping more than
intended region and enforce alignment on size, to prepare for
RZ/G3E support (John Madieu)
Rockchip DesignWare PCIe controller driver:
- Add tracepoints for PCIe controller LTSSM transitions and link rate
changes (Shawn Lin)
- Trace LTSSM events collected by the dw-rockchip debug FIFO (Shawn
Lin)
SOPHGO PCIe controller driver:
- Disable ASPM L0s and L1 on Sophgo 2042 PCIe Root Ports that
advertise support for them (Yao Zi)
Synopsys DesignWare PCIe controller driver:
- Continue with system suspend even if an Endpoint doesn't respond
with PME_TO_Ack message (Manivannan Sadhasivam)
- Set Endpoint MSI-X Table Size in the correct function of a
multi-function device when configuring MSI-X, not in Function 0
(Aksh Garg)
- Set Max Link Width and Max Link Speed for all functions of a
multi-function device, not just Function 0 (Aksh Garg)
- Expose PCIe event counters in groups 5-7 in debugfs (Hans Zhang)
Miscellaneous:
- Warn only once about invalid ACS kernel parameter format (Richard
Cheng)
- Suppress FW_BUG warning when writing sysfs 'numa_node' with the
current value (Li RongQing)
- Drop redundant 'depends on PCI' from Kconfig (Julian Braha)"
* tag 'pci-v7.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (165 commits)
PCI/P2PDMA: Add Google SoCs to the P2P DMA host bridge list
PCI/P2PDMA: Allow wildcard Device IDs in host bridge list
PCI: sg2042: Avoid L0s and L1 on Sophgo 2042 PCIe Root Ports
PCI: cadence: Add flags for disabling ASPM capability for broken Root Ports
PCI: tegra194: Add core monitor clock support
dt-bindings: PCI: tegra194: Add monitor clock support
PCI: tegra194: Enable hardware hot reset mode in Endpoint mode
PCI: tegra194: Enable DMA interrupt
PCI: tegra194: Remove IRQF_ONESHOT flag during Endpoint interrupt registration
PCI: tegra194: Calibrate pipe to UPHY for Endpoint mode
PCI: tegra194: Assert CLKREQ# explicitly by default
PCI: tegra194: Fix CBB timeout caused by DBI access before core power-on
PCI: tegra194: Disable L1.2 capability of Tegra234 EP
PCI: dwc: Apply ECRC workaround to DesignWare 5.00a as well
PCI: tegra194: Use DWC IP core version
PCI: tegra194: Free up Endpoint resources during remove()
PCI: tegra194: Allow system suspend when the Endpoint link is not up
PCI: tegra194: Set LTR message request before PCIe link up in Endpoint mode
PCI: tegra194: Disable direct speed change for Endpoint mode
PCI: tegra194: Use devm_gpiod_get_optional() to parse "nvidia,refclk-select"
...
In an armv7 system that uses non-3G/1G split and with more than 512MB physical memory, driver load may fail with following error:
section 29 reloc 0 sym '': relocation 42 out of range (0xc2ab9be8 ->
0x7fad5998)
This happens when relocation R_ARM_PREL31 from the unwind section
.ARM.extab and .ARM.exidx are allocated from the VMALLOC space while
.text section is from MODULES_VADDR space. It exceeds the +/-1GB
relocation requirement of R_ARM_PREL31 hence triggers the error.
The fix is to mark .ARM.extab and .ARM.exidx sections as executable so
they can be allocated along with .text section and always meet range
requirement.
Co-developed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
When a bridge window contains big and small resource(s), the small
resource(s) may not amount to the half of the size of the big resource
which would allow calculate_head_align() to shrink the head alignment.
This results in always placing the small resource(s) after the big
resource.
In general, it would be good to be able to place the small resource(s)
before the big resource to achieve better utilization of the address space.
In the cases where the large resource can only fit at the end of the
window, it is even required.
However, carrying the information over from pbus_size_mem() and
calculate_head_align() to __pci_assign_resource() and
pcibios_align_resource() is not easy with the current data structures.
A somewhat hacky way to move the non-aligning tail part to the head is
possible within pcibios_align_resource(). The free space between the start
of the free space span and the aligned start address can be compared with
the non-aligning remainder of the size. If the free space is larger than
the remainder, placing the remainder before the start address is possible.
This relocation should generally work, because PCI resources consist only
power-of-2 atoms.
Various arch requirements may still need to override the relocation, so the
relocation is only applied selectively in such cases.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221205
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Xifer <xiferdev@gmail.com>
Link: https://patch.msgid.link/20260324165633.4583-10-ilpo.jarvinen@linux.intel.com
Aligning res->start by align inside pcibios_align_resource() is unnecessary
because caller of pcibios_align_resource() is __find_resource_space() that
aligns res->start with align before calling pcibios_align_resource().
Aligning by align in case of IORESOURCE_IO && start & 0x300 cannot ever
result in changing start either because 0x300 bits would have not survived
the earlier alignment if align was large enough to have an impact.
Thus, remove the duplicated aligning from pcibios_align_resource().
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260324165633.4583-5-ilpo.jarvinen@linux.intel.com
__find_resource_space() calculates the full extent of empty space but only
passes the aligned space to resource_alignf callback. In some situations,
the callback may choose take advantage of the free space before the
requested alignment.
Pass the full extent of the calculated empty space to resource_alignf
callback as an additional parameter.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Xifer <xiferdev@gmail.com>
Link: https://patch.msgid.link/20260324165633.4583-3-ilpo.jarvinen@linux.intel.com
Commit 3e86e4d74c ("kbuild: keep .modinfo section in
vmlinux.unstripped") added .modinfo to ELF_DETAILS while removing it
from COMMON_DISCARDS, as it was needed in vmlinux.unstripped and
ELF_DETAILS was present in all architecture specific vmlinux linker
scripts. While this shuffle is fine for vmlinux, ELF_DETAILS and
COMMON_DISCARDS may be used by other linker scripts, such as the s390
and x86 compressed boot images, which may not expect to have a .modinfo
section. In certain circumstances, this could result in a bootloader
failing to load the compressed kernel [1].
Commit ddc6cbef3e ("s390/boot/vmlinux.lds.S: Ensure bzImage ends with
SecureBoot trailer") recently addressed this for the s390 bzImage but
the same bug remains for arm, parisc, and x86. The presence of .modinfo
in the x86 bzImage was the root cause of the issue worked around with
commit d50f210913 ("kbuild: align modinfo section for Secureboot
Authenticode EDK2 compat"). misc.c in arch/x86/boot/compressed includes
lib/decompress_unzstd.c, which in turn includes lib/xxhash.c and its
MODULE_LICENSE / MODULE_DESCRIPTION macros due to the STATIC definition.
Split .modinfo out from ELF_DETAILS into its own macro and handle it in
all vmlinux linker scripts. Discard .modinfo in the places where it was
previously being discarded from being in COMMON_DISCARDS, as it has
never been necessary in those uses.
Cc: stable@vger.kernel.org
Fixes: 3e86e4d74c ("kbuild: keep .modinfo section in vmlinux.unstripped")
Reported-by: Ed W <lists@wildgooses.com>
Closes: https://lore.kernel.org/587f25e0-a80e-46a5-9f01-87cb40cfa377@wildgooses.com/ [1]
Tested-by: Ed W <lists@wildgooses.com> # x86_64
Link: https://patch.msgid.link/20260225-separate-modinfo-from-elf-details-v1-1-387ced6baf4b@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
This is the exact same thing as the 'alloc_obj()' version, only much
smaller because there are a lot fewer users of the *alloc_flex()
interface.
As with alloc_obj() version, this was done entirely with mindless brute
force, using the same script, except using 'flex' in the pattern rather
than 'objs*'.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
Pull asm-generic header updates from Arnd Bergmann:
"A series from Thomas Weißschuh cleans up the UAPI header files to no
longer contain any references to Kconfig symbols, as these make no
sense in userspace.
The build-time check for these was originally added by Sam Ravnborg in
linux-2.6.28, and a later version started warning for all newly added
CONFIG_* checks here but kept a list of known exceptions. With the
last exceptions gone from that list, the warning is now unconditional
in 'make headers_install'.
John Garry contributed a cleanup of cpumask_of_node()"
* tag 'asm-generic-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
scripts: headers_install.sh: Remove config leak ignore machinery
x86/uapi: Stop leaking kconfig references to userspace
nios2: uapi: Remove custom asm/swab.h from UAPI
ARM: uapi: Drop PSR_ENDSTATE
ARC: Always use SWAPE instructions for __arch_swab32()
include/asm-generic/topology.h: Remove unused definition of cpumask_of_node()
Pull x86 paravirt updates from Borislav Petkov:
- A nice cleanup to the paravirt code containing a unification of the
paravirt clock interface, taming the include hell by splitting the
pv_ops structure and removing of a bunch of obsolete code (Juergen
Gross)
* tag 'x86_paravirt_for_v7.0_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
x86/paravirt: Use XOR r32,r32 to clear register in pv_vcpu_is_preempted()
x86/paravirt: Remove trailing semicolons from alternative asm templates
x86/pvlocks: Move paravirt spinlock functions into own header
x86/paravirt: Specify pv_ops array in paravirt macros
x86/paravirt: Allow pv-calls outside paravirt.h
objtool: Allow multiple pv_ops arrays
x86/xen: Drop xen_mmu_ops
x86/xen: Drop xen_cpu_ops
x86/xen: Drop xen_irq_ops
x86/paravirt: Move pv_native_*() prototypes to paravirt.c
x86/paravirt: Introduce new paravirt-base.h header
x86/paravirt: Move paravirt_sched_clock() related code into tsc.c
x86/paravirt: Use common code for paravirt_steal_clock()
riscv/paravirt: Use common code for paravirt_steal_clock()
loongarch/paravirt: Use common code for paravirt_steal_clock()
arm64/paravirt: Use common code for paravirt_steal_clock()
arm/paravirt: Use common code for paravirt_steal_clock()
sched: Move clock related paravirt code to kernel/sched
paravirt: Remove asm/paravirt_api_clock.h
x86/paravirt: Move thunk macros to paravirt_types.h
...
Remove the arch-specific variant of paravirt_steal_clock() and use
the common one instead.
This allows to remove paravirt.c and paravirt.h from arch/arm.
Until all archs supporting Xen have been switched to the common code
of paravirt_steal_clock(), drivers/xen/time.c needs to include
asm/paravirt.h for those archs, while this is not necessary for arm
any longer.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260105110520.21356-8-jgross@suse.com
Paravirt clock related functions are available in multiple archs.
In order to share the common parts, move the common static keys
to kernel/sched/ and remove them from the arch specific files.
Make a common paravirt_steal_clock() implementation available in
kernel/sched/cputime.c, guarding it with a new config option
CONFIG_HAVE_PV_STEAL_CLOCK_GEN, which can be selected by an arch
in case it wants to use that common variant.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260105110520.21356-7-jgross@suse.com
Pull ARM development updates from Russell King:
- Use string choices helpers
- Add support for HAVE_FUNCTION_GRAPH_FREGS
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux:
ARM: 9457/1: ftrace: Implement HAVE_FUNCTION_GRAPH_FREGS
ARM: 9456/1: mm: fault: use string choices helper
ARM: 9454/1: kernel: bios32: use string choices helper
ARM: 9451/1: mm: l2x0: use string choices helper
Enable support for ftrace's funcgraph-retval feature by capturing r0-r3
and fp.
Since ARM does not provide its own __arch_ftrace_regs structure,
we instead populate pt_regs with the registers required by ftrace.
Cc: Donglin Peng <pengdonglin@sangfor.com.cn>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Pull VDSO updates from Thomas Gleixner:
- Further consolidation of the VDSO infrastructure and the common data
store
- Simplification of the related Kconfig logic
- Improve the VDSO selftest suite
* tag 'timers-vdso-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
selftests: vDSO: Drop vdso_test_clock_getres
selftests: vDSO: vdso_test_abi: Add tests for clock_gettime64()
selftests: vDSO: vdso_test_abi: Test CPUTIME clocks
selftests: vDSO: vdso_test_abi: Use explicit indices for name array
selftests: vDSO: vdso_test_abi: Drop clock availability tests
selftests: vDSO: vdso_test_abi: Use ksft_finished()
selftests: vDSO: vdso_test_abi: Correctly skip whole test with missing vDSO
selftests: vDSO: Fix -Wunitialized in powerpc VDSO_CALL() wrapper
vdso: Add struct __kernel_old_timeval forward declaration to gettime.h
vdso: Gate VDSO_GETRANDOM behind HAVE_GENERIC_VDSO
vdso: Drop Kconfig GENERIC_VDSO_TIME_NS
vdso: Drop Kconfig GENERIC_VDSO_DATA_STORE
vdso: Drop kconfig GENERIC_COMPAT_VDSO
vdso: Drop kconfig GENERIC_VDSO_32
riscv: vdso: Untangle Kconfig logic
time: Build generic update_vsyscall() only with generic time vDSO
vdso/gettimeofday: Remove !CONFIG_TIME_NS stubs
vdso: Move ENABLE_COMPAT_VDSO from core to arm64
ARM: VDSO: Remove cntvct_ok global variable
vdso/datastore: Gate time data behind CONFIG_GENERIC_GETTIMEOFDAY
Pull scheduler updates from Ingo Molnar:
"Core scheduler changes:
- Make migrate_{en,dis}able() inline, to improve performance
(Menglong Dong)
- Move STDL_INIT() functions out-of-line (Peter Zijlstra)
- Unify the SCHED_{SMT,CLUSTER,MC} Kconfig (Peter Zijlstra)
Fair scheduling:
- Defer throttling to when tasks exit to user-space, to reduce the
chance & impact of throttle-preemption with held locks and other
resources (Aaron Lu, Valentin Schneider)
- Get rid of sched_domains_curr_level hack for tl->cpumask(), as the
warning was getting triggered on certain topologies (Peter
Zijlstra)
Misc cleanups & fixes:
- Header cleanups (Menglong Dong)
- Fix race in push_dl_task() (Harshit Agarwal)"
* tag 'sched-core-2025-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Fix some typos in include/linux/preempt.h
sched: Make migrate_{en,dis}able() inline
rcu: Replace preempt.h with sched.h in include/linux/rcupdate.h
arch: Add the macro COMPILE_OFFSETS to all the asm-offsets.c
sched/fair: Do not balance task to a throttled cfs_rq
sched/fair: Do not special case tasks in throttled hierarchy
sched/fair: update_cfs_group() for throttled cfs_rqs
sched/fair: Propagate load for throttled cfs_rq
sched/fair: Get rid of throttled_lb_pair()
sched/fair: Task based throttle time accounting
sched/fair: Switch to task based throttle model
sched/fair: Implement throttle task work and related helpers
sched/fair: Add related data structure for task based throttle
sched: Unify the SCHED_{SMT,CLUSTER,MC} Kconfig
sched: Move STDL_INIT() functions out-of-line
sched/fair: Get rid of sched_domains_curr_level hack for tl->cpumask()
sched/deadline: Fix race in push_dl_task()
Pull hardening updates from Kees Cook:
"One notable addition is the creation of the 'transitional' keyword for
kconfig so CONFIG renaming can go more smoothly.
This has been a long-standing deficiency, and with the renaming of
CONFIG_CFI_CLANG to CONFIG_CFI (since GCC will soon have KCFI
support), this came up again.
The breadth of the diffstat is mainly this renaming.
- Clean up usage of TRAILING_OVERLAP() (Gustavo A. R. Silva)
- lkdtm: fortify: Fix potential NULL dereference on kmalloc failure
(Junjie Cao)
- Add str_assert_deassert() helper (Lad Prabhakar)
- gcc-plugins: Remove TODO_verify_il for GCC >= 16
- kconfig: Fix BrokenPipeError warnings in selftests
- kconfig: Add transitional symbol attribute for migration support
- kcfi: Rename CONFIG_CFI_CLANG to CONFIG_CFI"
* tag 'hardening-v6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
lib/string_choices: Add str_assert_deassert() helper
kcfi: Rename CONFIG_CFI_CLANG to CONFIG_CFI
kconfig: Add transitional symbol attribute for migration support
kconfig: Fix BrokenPipeError warnings in selftests
gcc-plugins: Remove TODO_verify_il for GCC >= 16
stddef: Introduce __TRAILING_OVERLAP()
stddef: Remove token-pasting in TRAILING_OVERLAP()
lkdtm: fortify: Fix potential NULL dereference on kmalloc failure
Pull copy_process updates from Christian Brauner:
"This contains the changes to enable support for clone3() on nios2
which apparently is still a thing.
The more exciting part of this is that it cleans up the inconsistency
in how the 64-bit flag argument is passed from copy_process() into the
various other copy_*() helpers"
[ Fixed up rv ltl_monitor 32-bit support as per Sasha Levin in the merge ]
* tag 'kernel-6.18-rc1.clone3' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
nios2: implement architecture-specific portion of sys_clone3
arch: copy_thread: pass clone_flags as u64
copy_process: pass clone_flags as u64 across calltree
copy_sighand: Handle architectures where sizeof(unsigned long) < sizeof(u64)
The include/generated/asm-offsets.h is generated in Kbuild during
compiling from arch/SRCARCH/kernel/asm-offsets.c. When we want to
generate another similar offset header file, circular dependency can
happen.
For example, we want to generate a offset file include/generated/test.h,
which is included in include/sched/sched.h. If we generate asm-offsets.h
first, it will fail, as include/sched/sched.h is included in asm-offsets.c
and include/generated/test.h doesn't exist; If we generate test.h first,
it can't success neither, as include/generated/asm-offsets.h is included
by it.
In x86_64, the macro COMPILE_OFFSETS is used to avoid such circular
dependency. We can generate asm-offsets.h first, and if the
COMPILE_OFFSETS is defined, we don't include the "generated/test.h".
And we define the macro COMPILE_OFFSETS for all the asm-offsets.c for this
purpose.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
