Pull SoC devicetree updates from Arnd Bergmann:
"A number of SoC platforms are adding modernized variants of their
already supported chips time, with a total of 12 new SoCs, and two
older SoC getting removed:
- Qualcomm Glymur is a compute SoC using 18 Oryon-2 CPU cores
- Qualcomm Mahua is a variant of Glymur with only 12 CPU cores, but
largely identical.
- Qualcomm Eliza is an embeded platform for mobile phone (SM7750) and
IOT (QC7790S/M) workloads
- Qualcomm IPQ5210 is a wireless networking SoC using Cortex-A53
cores
- Qualcomm apq8084 and ipq806x had only rudimentary support but no
actual products using them, so they are now gone.
- Axis ARTPEC-9 is a follow-up to the ARTPEC-8 embedded SoC, using
the Samsung SoC platform but now with Cortex-A55 cores
- ARM Zena is a virtual platform in FVP using Cortex-A720AE cores,
with additional versions planned to be merged in the future.
- ARM corstone-1000-a320 is a reference platform for IOT, using
low-end Cortex-A320 cores
- Microchip LAN9691 is an updated 64-bit variant of the arm32 lan966x
series of networking SoCs
- Microchip PIC64GX is an embedded RISC-V chip using SIFIVE U54 CPU
cores
- Rockchip RV1103B is the low-end 32-bit single-core vision processor
- Renesas RZ/G3L (r9a08g046) is an industrial embedded chip using
Cortex-A55 cores, similar to the G3E and G3S variants we already
supported.
- NXP S32N79 is an automotive SoC using Cortex-A78AE cores, a
significant upgrade from the older S32V and S32G series
These all come with at least one reference board or an initial product
using these, in total there are 67 newly added boards. The ones for
already supported SoCs are:
- Two more Aspeed BMC based boards
- Three older tablets based on 32-bit OMAP4 and Exynos5 SoCs
- One Set-top-box based on Allwinner H6
- 22 additional industrial/embedded boards using 64-bit NXP i.MX8M or
i.MX9 SoCs
- 20 Qualcomm SoC based machines across all possible markets:
workstation, gaming, laptop, phone, networking, reference, ...
- Three more Rockchips rk35xx based boards
- Four variants of the Toradex Verdin using TI AM62
Other notable bits are:
- A cleanup for the 32-bit Tegra paz00 board moved the last board
specific code on Tegra into equivalent dts syntax.
- There continues to be a significant number of fixes for static
checking of dtc syntax, but it feels like this is slowing down,
hopefully getting into a state where most known issues are
addressed
- Additional hardware support for many existing boards across SoC
families, notably Qualcomm, Broadcom, i.MX2, i.MX6, Rockchips,
STM32, Mediatek, Tegra, TI and Microchip"
* tag 'soc-dt-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (841 commits)
arm64: dts: ti: k3: Use memory-region-names for r5f
ARM: dts: imx: Add DT overlays for DH i.MX6 DHCOM SoM and boards
ARM: dts: imx6sx: remove fallback compatible string fsl,imx28-lcdif
ARM: dts: imx25: rename node name tcq to touchscreen
ARM: dts: imx: b850v3: Disable unused usdhc4
ARM: dts: imx: b850v3: Define GPIO line names
ARM: dts: imx: b850v3: Use alphabetical sorting
ARM: dts: imx: bx50v3: Configure phy-mode to eliminate a warning
ARM: dts: imx: bx50v3: Configure switch PHY max-speed to 100Mbps
ARM: dts: imx7ulp: Add CPU clock and OPP table support
ARM: dts: imx7-mba7: Deassert BOOT_EN after boot
ARM: dts: tqma7: add boot phase properties
ARM: dts: imx7s: add boot phase properties
ARM: dts: tqma6ul[l]: correct spelling of TQ-Systems
ARM: dts: mba6ulx: add boot phase properties
ARM: dts: imx6ul[l]-tqma6ul[l]: add boot phase properties
ARM: dts: imx6ul/imx6ull: add boot phase properties
ARM: dts: imx6qdl-mba6: add boot phase properties
ARM: dts: imx6qdl-tqma6: add boot phase properties
ARM: dts: imx6qdl: add boot phase properties
...
Pull SoC devicetree updates from Arnd Bergmann:
"There are a handful of new SoCs this time, all of these are more or
less related to chips in a wider family:
- SpacemiT Key Stone K3 is an 8-core risc-v chip, and the first
widely available RVA23 implementation. Note that this is entirely
unrelated with the similarly named Texas Instruments K3 chip family
that follwed the TI Keystone2 SoC.
- The Realtek Kent family of SoCs contains three chip models
rtd1501s, rtd1861b and rtd1920s, and is related to their earlier
Set-top-box and NAS products such as rtd1619, but is built on newer
Arm Cortex-A78 cores.
- The Qualcomm Milos family includes the Snapdragon 7s Gen 3 (SM7635)
mobile phone SoC built around Armv9 Kryo cores of the Arm
Cortex-A720 generation. This one is used in the Fairphone Gen 6
- Qualcomm Kaanapali is a new SoC based around eight high performance
Oryon CPU cores
- NXP i.MX8QP and i.MX952 are both feature reduced versions of chips
we already support, i.e. the i.MX8QM and i.MX952, with fewer CPU
cores and I/O interfaces.
As part of a cleanup, a number of SoC specific devicetree files got
removed because they did not have a single board using the .dtsi files
and they were never compile tested as a result: Samsung s3c6400, ST
spear320s, ST stm32mp21xc/stm32mp23xc/stm32mp25xc, Renesas
r8a779m0/r8a779m2/r8a779m4/r8a779m6/r8a779m7/r8a779m8/r8a779mb/
r9a07g044c1/r9a07g044l1/r9a07g054l1/r9a09g047e37, and TI
am3703/am3715. All of these could be restored easily if a new board
gets merged.
Broadcom/Cavium/Marvell ThunderX2 gets removed along with its only
machine, as all remaining users are assumed to be using ACPI based
firmware.
A relatively small number of 43 boards get added this time, and almost
all of them for arm64. Aside from the reference boards for the newly
added SoCs, this includes:
- Three server boards use 32-bit ASpeed BMCs
- One more reference board for 32-bit Microchip LAN9668
- 64-bit Arm single-board computers based on Amlogic s905y4, CIX
sky1, NXP ls1028a/imx8mn/imx8mp/imx91/imx93/imx95, Qualcomm
qcs6490/qrb2210 and Rockchip rk3568/rk3588s
- Carrier board for SOMs using Intel agilex5, Marvell Armada 7020,
NXP iMX8QP, Mediatek mt8370/mt8390 and rockchip rk3588
- Two mobile phones using Snapdragon 845
- A gaming device and a NAS box, both based on Rockchips rk356x
On top of the newly added boards and SoCs, there is a lot of
background activity going into cleanups, in particular towards getting
a warning-free dtc build, and the usual work on adding support for
more hardware on the previously added machines"
* tag 'soc-dt-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (757 commits)
dt-bindings: intel: Add Agilex eMMC support
arm64: dts: socfpga: agilex: add emmc support
arm64: dts: intel: agilex5: Add simple-bus node on top of dma controller node
ARM: dts: socfpga: fix dtbs_check warning for fpga-region
ARM: dts: socfpga: add #address-cells and #size-cells for sram node
dt-bindings: altera: document syscon as fallback for sys-mgr
arm64: dts: altera: Use lowercase hex
dt-bindings: arm: altera: combine Intel's SoCFPGA into altera.yaml
arm64: dts: socfpga: agilex5: Add IOMMUS property for ethernet nodes
arm64: dts: socfpga: agilex5: add support for modular board
dt-bindings: intel: Add Agilex5 SoCFPGA modular board
arm64: dts: socfpga: agilex5: Add dma-coherent property
arm64: dts: realtek: Add Kent SoC and EVB device trees
dt-bindings: arm: realtek: Add Kent Soc family compatibles
ARM: dts: samsung: Drop s3c6400.dtsi
ARM: dts: nuvoton: Minor whitespace cleanup
MAINTAINERS: Add Falcon DB
arm64: dts: a7k: add COM Express boards
ARM: dts: microchip: Drop usb_a9g20-dab-mmx.dtsi
arm64: dts: rockchip: Fix rk3588 PCIe range mappings
...
In a vain attempt to consolidate the email zoo switch everything to the
kernel.org account.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull new SoC families update from Arnd Bergmann:
"These three new families of SoC are split out into a separate branch
because they touch multiple parts of the source tree and are better
left separate for the initial merge.
- Black Sesame Technologies C1200 is an automotive SoC using
Cortex-A78 CPU cores
- Anlogic dr1v90 (not to be confused with Amlogic) is an FPGA
platform using a single nuclei ux900 RISC-V core
- Tenstorrent Blackhole is a Neural Processing Unit using custom
"Tensix" cores for computation offload managed by Linux running on
SiFive X280 RISC-V cores.
Support for all three is rather rudimentary at the moment and will get
improved as device drivers are merged through other tree"
* tag 'soc-newsoc-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (24 commits)
MAINTAINERS: add Black Sesame Technologies (BST) ARM SoC support
arm64: defconfig: enable BST platform support
arm64: dts: bst: add support for Black Sesame Technologies C1200 CDCU1.0 board
arm64: Kconfig: add ARCH_BST for Black Sesame Technologies SoCs
dt-bindings: arm: add Black Sesame Technologies (bst) SoC
dt-bindings: vendor-prefixes: Add Black Sesame Technologies Co., Ltd.
MAINTAINERS: Setup support for Anlogic tree
riscv: defconfig: Enable Anlogic SoC
riscv: dts: anlogic: Add Milianke MLKPAI FS01 board
riscv: dts: Add initial Anlogic DR1V90 SoC device tree
riscv: Add Anlogic SoC famly Kconfig support
dt-bindings: serial: snps-dw-apb-uart: Add Anlogic DR1V90 uart
dt-bindings: timer: Add Anlogic DR1V90 ACLINT MTIMER
dt-bindings: riscv: Add Anlogic DR1V90
dt-bindings: riscv: Add Nuclei UX900 compatibles
dt-bindings: vendor-prefixes: Add Anlogic, Milianke and Nuclei
riscv: defconfig: Enable Tenstorrent SoCs
riscv: Kconfig.socs: Add ARCH_TENSTORRENT for Tenstorrent SoCs
riscv: dts: Add Tenstorrent Blackhole SoC PCIe cards
dt-bindings: interrupt-controller: Add Tenstorrent Blackhole compatible
...
Pull devicetree updates from Rob Herring:
"DT bindings:
- Convert lattice,ice40-fpga-mgr, apm,xgene-storm-dma,
brcm,sr-thermal, amazon,al-thermal, brcm,ocotp, mt8173-mdp, Actions
Owl SPS, Marvell AP80x System Controller, Marvell CP110 System
Controller, cznic,moxtet, and apm,xgene-slimpro-mbox to DT schema
format
- Add i.MX95 fsl,irqsteer, MT8365 Mali Bifrost GPU, Anvo ANV32C81W
EEPROM, and Microchip pic64gx PLIC
- Add missing LGE, AMD Seattle, and APM X-Gene SoC platform
compatibles
- Updates to brcm,bcm2836-l1-intc, brcm,bcm2835-hvs, and bcm2711-hdmi
bindings to fix warnings on BCM2712 platforms
- Drop obsolete db8500-thermal.txt
- Treewide clean-up of extra blank lines and inconsistent quoting
- Ensure all .dtbo targets are applied to a base .dtb
- Speed up dt_binding_check by skipping running validation on empty
examples
DT core:
- Add of_machine_device_match() and of_machine_get_match_data()
helpers and convert users treewide
- Fix bounds checking of address properties in FDT code. Rework the
code to have a single implementation of the bounds checks.
- Rework of_irq_init() to ignore any implicit interrupt-parent (i.e.
in a parent node) on nodes without an interrupt. This matches the
spec description and fixes some RISC-V platforms.
- Avoid a spurious message on overlay removal
- Skip DT kunit tests on RISCV+ACPI"
* tag 'devicetree-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (55 commits)
dt-bindings: kbuild: Skip validating empty examples
dt-bindings: interrupt-controller: brcm,bcm2836-l1-intc: Drop interrupt-controller requirement
dt-bindings: display: Fix brcm,bcm2835-hvs bindings for BCM2712
dt-bindings: display: bcm2711-hdmi: Add interrupt details for BCM2712
of: Skip devicetree kunit tests when RISCV+ACPI doesn't populate root node
soc: tegra: Simplify with of_machine_device_match()
soc: qcom: ubwc: Simplify with of_machine_get_match_data()
powercap: dtpm: Simplify with of_machine_get_match_data()
platform: surface: Simplify with of_machine_get_match_data()
irqchip/atmel-aic: Simplify with of_machine_get_match_data()
firmware: qcom: scm: Simplify with of_machine_device_match()
cpuidle: big_little: Simplify with of_machine_device_match()
cpufreq: sun50i: Simplify with of_machine_device_match()
cpufreq: mediatek: Simplify with of_machine_get_match_data()
cpufreq: dt-platdev: Simplify with of_machine_get_match_data()
of: Add wrappers to match root node with OF device ID tables
dt-bindings: eeprom: at25: Add Anvo ANV32C81W
of/reserved_mem: Simplify the logic of __reserved_mem_alloc_size()
of/reserved_mem: Simplify the logic of fdt_scan_reserved_mem_reg_nodes()
of/reserved_mem: Simplify the logic of __reserved_mem_reserve_reg()
...
Initial Anlogic Platform Support
Add bindings for the serial and timer peripherals, and a basic soc dtsi
for the Anlogic dr1v90 SoC. The Milianke MLKPAI FS01 is the first board
for this SoC. Add myself as maintainer for this platform for the time
being.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'anlogic-initial-6.19-v2' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
MAINTAINERS: Setup support for Anlogic tree
riscv: defconfig: Enable Anlogic SoC
riscv: dts: anlogic: Add Milianke MLKPAI FS01 board
riscv: dts: Add initial Anlogic DR1V90 SoC device tree
riscv: Add Anlogic SoC famly Kconfig support
dt-bindings: serial: snps-dw-apb-uart: Add Anlogic DR1V90 uart
dt-bindings: timer: Add Anlogic DR1V90 ACLINT MTIMER
dt-bindings: riscv: Add Anlogic DR1V90
dt-bindings: riscv: Add Nuclei UX900 compatibles
dt-bindings: vendor-prefixes: Add Anlogic, Milianke and Nuclei
Add MTIMER support for Anlogic DR1V90 SoC, which uses Nuclei UX900 with
a TIMER unit compliant with the ACLINT specification.
Signed-off-by: Junhui Liu <junhui.liu@pigmoral.tech>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Pull devicetree updates from Rob Herring:
"DT core:
- Update dtc to upstream version v1.7.2-35-g52f07dcca47c
- Add stub for of_get_next_child_with_prefix()
- Convert of_msi_map_id() callers to of_msi_xlate()
DT bindings:
- Convert multiple text board bindings to DT schema format
- Add bindings for synaptics,synaptics_i2c touchscreen controller,
innolux,n133hse-ea1 and nlt,nl12880bc20-spwg-24 displays, and NXP
vf610 reboot controller
- Add new Arm Cortex-A320/A520AE/A720AE and C1-Nano/Pro/Premium/Ultra
CPUs. Add missing Applied Micro CPU compatibles. Add pu-supply and
fsl,soc-operating-points properties for CPU nodes.
- Add QCom Glymur PDC and tegra264-agic interrupt controllers
- Add samsung,exynos8890-mali GPU to Arm Mali Midgard
- Drop Samsung S3C2410 display related bindings
- Allow separate DP lane and AUX connections in dp-connector
- Add some missing, undocumented vendor prefixes
- Add missing '#address-cells' properties in interrupt controller
bindings which dtc now warns about
- Drop duplicate socfpga-sdram-edac.txt, moxa,moxart-watchdog.txt,
fsl/mpic.txt, ti,opa362.txt, and cavium-thunder2.txt legacy text
bindings which are already covered by existing schemas.
- Various binding fixes for Mediatek platforms in mailbox, regulator,
pinctrl, timer, and display
- Drop work-around for yamllint quoting of values containing ','
- Various spelling, typo, grammar, and duplicated words fixes in DT
bindings and docs
- Add binding guidelines for defining properties at top level of
schemas, lack of node name ABI, and usage of simple-mfd"
* tag 'devicetree-for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (81 commits)
dt-bindings: arm: altera: Drop socfpga-sdram-edac.txt
dt-bindings: gpu: Convert nvidia,gk20a to DT schema
dt-bindings: rng: sparc_sun_oracle_rng: convert to DT schema
dt-bindings: vendor-prefixes: update regex for properties without a prefix
dt-bindings: display: bridge: convert megachips-stdpxxxx-ge-b850v3-fw.txt to yaml
scripts: dt_to_config: fix grammar and a typo in --help text
dt-bindings: fix spelling, typos, grammar, duplicated words
docs: dt: fix grammar and spelling
of: base: Add of_get_next_child_with_prefix() stub
dt-bindings: trivial-devices: Add compatible string synaptics,synaptics_i2c
dt-bindings: soc: mediatek: pwrap: Add power-domains property
dt-bindings: pinctrl: mt65xx: Allow gpio-line-names
dt-bindings: media: Convert MediaTek mt8173-vpu bindings to DT schema
dt-bindings: arm: mediatek: Support mt8183-audiosys variant
dt-bindings: mailbox: mediatek,gce-mailbox: Make clock-names optional
dt-bindings: regulator: mediatek,mt6331: Add missing compatible
dt-bindings: regulator: mediatek,mt6331: Fix various regulator names
dt-bindings: regulator: mediatek,mt6332-regulator: Add missing compatible
dt-bindings: pinctrl: mediatek,mt7622-pinctrl: Add missing base reg
dt-bindings: pinctrl: mediatek,mt7622-pinctrl: Add missing pwm_ch7_2
...
Pull pwm updates from Uwe Kleine-König:
"The core highlights for this cycle are:
- The pca9586 driver was converted to the waveform API
- Waveform drivers automatically provide a gpio chip to make PWMs
usable as GPIOs (The pca9586 driver did that in a driver specific
implementation before)
Otherwise it's the usual mix of fixes and device tree and driver
changes to support new hardware variants"
* tag 'pwm/for-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux: (30 commits)
pwm: cros-ec: Avoid -Wflex-array-member-not-at-end warnings
dt-bindings: pwm: samsung: add exynos8890 compatible
dt-bindings: pwm: apple,s5l-fpwm: Add t6020-fpwm compatible
dt-bindings: pwm: nxp,lpc1850-sct-pwm: Minor whitespace cleanup in example
pwm: pca9586: Convert to waveform API
pwm: pca9685: Drop GPIO support
pwm: pca9685: Make use of register caching in regmap
pwm: pca9685: Use bulk write to atomicially update registers
pwm: pca9685: Don't disable hardware in .free()
pwm: Add the S32G support in the Freescale FTM driver
dt-bindings: pwm: fsl,vf610-ftm-pwm: Add compatible for s32g2 and s32g3
pwm: mediatek: Lock and cache clock rate
pwm: mediatek: Fix various issues in the .apply() callback
pwm: mediatek: Implement .get_state() callback
pwm: mediatek: Initialize clks when the hardware is enabled at probe time
pwm: mediatek: Rework parameters for clk helper function
pwm: mediatek: Introduce and use a few more register defines
pwm: mediatek: Simplify representation of channel offsets
pwm: tiecap: Document behaviour of hardware disable
pwm: Provide a gpio device for waveform drivers
...
Add a compatible for the General Purpose Timer (GPT) found on the
MediaTek Helio X10 MT6795 SoC which is fully compatible with the
one found in MT6577.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
