docs: move x86 documentation into Documentation/arch/

Move the x86 documentation under Documentation/arch/ as a way of cleaning
up the top-level directory and making the structure of our docs more
closely match the structure of the source directories it describes.

All in-kernel references to the old paths have been updated.

Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: linux-arch@vger.kernel.org
Cc: x86@kernel.org
Cc: Borislav Petkov <bp@alien8.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/lkml/20230315211523.108836-1-corbet@lwn.net/
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

Documentation/admin-guide/hw-vuln/mds.rst

@@ -58,7 +58,7 @@ Because the buffers are potentially shared between Hyper-Threads cross
 Hyper-Thread attacks are possible.
 
 Deeper technical information is available in the MDS specific x86
-architecture section: :ref:`Documentation/x86/mds.rst <mds>`.
+architecture section: :ref:`Documentation/arch/x86/mds.rst <mds>`.
 
 
 Attack scenarios

Documentation/admin-guide/hw-vuln/tsx_async_abort.rst

@@ -63,7 +63,7 @@ attacker needs to begin a TSX transaction and raise an asynchronous abort
 which in turn potentially leaks data stored in the buffers.
 
 More detailed technical information is available in the TAA specific x86
-architecture section: :ref:`Documentation/x86/tsx_async_abort.rst <tsx_async_abort>`.
+architecture section: :ref:`Documentation/arch/x86/tsx_async_abort.rst <tsx_async_abort>`.
 
 
 Attack scenarios

Documentation/admin-guide/kernel-parameters.rst

@@ -177,7 +177,7 @@ parameter is applicable::
 	X86-32	X86-32, aka i386 architecture is enabled.
 	X86-64	X86-64 architecture is enabled.
 			More X86-64 boot options can be found in
-			Documentation/x86/x86_64/boot-options.rst.
+			Documentation/arch/x86/x86_64/boot-options.rst.
 	X86	Either 32-bit or 64-bit x86 (same as X86-32+X86-64)
 	X86_UV	SGI UV support is enabled.
 	XEN	Xen support is enabled
@@ -192,10 +192,10 @@ In addition, the following text indicates that the option::
 Parameters denoted with BOOT are actually interpreted by the boot
 loader, and have no meaning to the kernel directly.
 Do not modify the syntax of boot loader parameters without extreme
-need or coordination with <Documentation/x86/boot.rst>.
+need or coordination with <Documentation/arch/x86/boot.rst>.
 
 There are also arch-specific kernel-parameters not documented here.
-See for example <Documentation/x86/x86_64/boot-options.rst>.
+See for example <Documentation/arch/x86/x86_64/boot-options.rst>.
 
 Note that ALL kernel parameters listed below are CASE SENSITIVE, and that
 a trailing = on the name of any parameter states that that parameter will

Documentation/admin-guide/kernel-parameters.txt

@@ -2973,7 +2973,7 @@
 
 	mce		[X86-32] Machine Check Exception
 
-	mce=option	[X86-64] See Documentation/x86/x86_64/boot-options.rst
+	mce=option	[X86-64] See Documentation/arch/x86/x86_64/boot-options.rst
 
 	md=		[HW] RAID subsystems devices and level
 			See Documentation/admin-guide/md.rst.
@@ -4410,7 +4410,7 @@
 			and performance comparison.
 
 	pirq=		[SMP,APIC] Manual mp-table setup
-			See Documentation/x86/i386/IO-APIC.rst.
+			See Documentation/arch/x86/i386/IO-APIC.rst.
 
 	plip=		[PPT,NET] Parallel port network link
 			Format: { parport<nr> | timid | 0 }
@@ -5588,7 +5588,7 @@
 
 	serialnumber	[BUGS=X86-32]
 
-	sev=option[,option...] [X86-64] See Documentation/x86/x86_64/boot-options.rst
+	sev=option[,option...] [X86-64] See Documentation/arch/x86/x86_64/boot-options.rst
 
 	shapers=	[NET]
 			Maximal number of shapers.
@@ -6767,7 +6767,7 @@
 			Can be used multiple times for multiple devices.
 
 	vga=		[BOOT,X86-32] Select a particular video mode
-			See Documentation/x86/boot.rst and
+			See Documentation/arch/x86/boot.rst and
 			Documentation/admin-guide/svga.rst.
 			Use vga=ask for menu.
 			This is actually a boot loader parameter; the value is

Documentation/admin-guide/ras.rst

@@ -199,7 +199,7 @@ Architecture (MCA)\ [#f3]_.
   mode).
 
 .. [#f3] For more details about the Machine Check Architecture (MCA),
-  please read Documentation/x86/x86_64/machinecheck.rst at the Kernel tree.
+  please read Documentation/arch/x86/x86_64/machinecheck.rst at the Kernel tree.
 
 EDAC - Error Detection And Correction
 *************************************

Documentation/admin-guide/sysctl/kernel.rst

@@ -95,7 +95,7 @@ is 0x15 and the full version number is 0x234, this file will contain
 the value 340 = 0x154.
 
 See the ``type_of_loader`` and ``ext_loader_type`` fields in
-Documentation/x86/boot.rst for additional information.
+Documentation/arch/x86/boot.rst for additional information.
 
 
 bootloader_version (x86 only)
@@ -105,7 +105,7 @@ The complete bootloader version number.  In the example above, this
 file will contain the value 564 = 0x234.
 
 See the ``type_of_loader`` and ``ext_loader_ver`` fields in
-Documentation/x86/boot.rst for additional information.
+Documentation/arch/x86/boot.rst for additional information.
 
 
 bpf_stats_enabled

Documentation/arch/index.rst

@@ -24,5 +24,5 @@ implementation.
    ../s390/index
    ../sh/index
    ../sparc/index
-   ../x86/index
+   x86/index
    ../xtensa/index

Documentation/arch/x86/boot.rst

@@ -1344,7 +1344,7 @@ follow::
 In addition to read/modify/write the setup header of the struct
 boot_params as that of 16-bit boot protocol, the boot loader should
 also fill the additional fields of the struct boot_params as
-described in chapter Documentation/x86/zero-page.rst.
+described in chapter Documentation/arch/x86/zero-page.rst.
 
 After setting up the struct boot_params, the boot loader can load the
 32/64-bit kernel in the same way as that of 16-bit boot protocol.
@@ -1380,7 +1380,7 @@ can be calculated as follows::
 In addition to read/modify/write the setup header of the struct
 boot_params as that of 16-bit boot protocol, the boot loader should
 also fill the additional fields of the struct boot_params as described
-in chapter Documentation/x86/zero-page.rst.
+in chapter Documentation/arch/x86/zero-page.rst.
 
 After setting up the struct boot_params, the boot loader can load
 64-bit kernel in the same way as that of 16-bit boot protocol, but

Documentation/arch/x86/booting-dt.rst

@@ -7,7 +7,7 @@ DeviceTree Booting
   the decompressor (the real mode entry point goes to the same  32bit
   entry point once it switched into protected mode). That entry point
   supports one calling convention which is documented in
-  Documentation/x86/boot.rst
+  Documentation/arch/x86/boot.rst
   The physical pointer to the device-tree block is passed via setup_data
   which requires at least boot protocol 2.09.
   The type filed is defined as