Merge tag 'riscv-for-linus-5.17-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux

Pull RISC-V updates from Palmer Dabbelt:

 - Support for the DA9063 as used on the HiFive Unmatched.

 - Support for relative extables, which puts us in line with other
   architectures and save some space in vmlinux.

 - A handful of kexec fixes/improvements, including the ability to run
   crash kernels from PCI-addressable memory on the HiFive Unmatched.

 - Support for the SBI SRST extension, which allows systems that do not
   have an explicit driver in Linux to reboot.

 - A handful of fixes and cleanups, including to the defconfigs and
   device trees.

* tag 'riscv-for-linus-5.17-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (52 commits)
  RISC-V: Use SBI SRST extension when available
  riscv: mm: fix wrong phys_ram_base value for RV64
  RISC-V: Use common riscv_cpuid_to_hartid_mask() for both SMP=y and SMP=n
  riscv: head: remove useless __PAGE_ALIGNED_BSS and .balign
  riscv: errata: alternative: mark vendor_patch_func __initdata
  riscv: head: make secondary_start_common() static
  riscv: remove cpu_stop()
  riscv: try to allocate crashkern region from 32bit addressible memory
  riscv: use hart id instead of cpu id on machine_kexec
  riscv: Don't use va_pa_offset on kdump
  riscv: dts: sifive: fu540-c000: Fix PLIC node
  riscv: dts: sifive: fu540-c000: Drop bogus soc node compatible values
  riscv: dts: sifive: Group tuples in register properties
  riscv: dts: sifive: Group tuples in interrupt properties
  riscv: dts: microchip: mpfs: Group tuples in interrupt properties
  riscv: dts: microchip: mpfs: Fix clock controller node
  riscv: dts: microchip: mpfs: Fix reference clock node
  riscv: dts: microchip: mpfs: Fix PLIC node
  riscv: dts: microchip: mpfs: Drop empty chosen node
  riscv: dts: canaan: Group tuples in interrupt properties
  ...

arch/riscv/Kconfig

@@ -14,6 +14,7 @@ config RISCV
 	def_bool y
 	select ARCH_CLOCKSOURCE_INIT
 	select ARCH_ENABLE_HUGEPAGE_MIGRATION if HUGETLB_PAGE && MIGRATION
+	select ARCH_ENABLE_SPLIT_PMD_PTLOCK if PGTABLE_LEVELS > 2
 	select ARCH_HAS_BINFMT_FLAT
 	select ARCH_HAS_DEBUG_VM_PGTABLE
 	select ARCH_HAS_DEBUG_VIRTUAL if MMU
@@ -75,6 +76,7 @@ config RISCV
 	select HAVE_ARCH_SECCOMP_FILTER
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_ARCH_TRANSPARENT_HUGEPAGE if 64BIT && MMU
+	select ARCH_ENABLE_THP_MIGRATION if TRANSPARENT_HUGEPAGE
 	select HAVE_ARCH_THREAD_STRUCT_WHITELIST
 	select HAVE_ARCH_VMAP_STACK if MMU && 64BIT
 	select HAVE_ASM_MODVERSIONS
@@ -279,7 +281,7 @@ choice
 		depends on 32BIT
 		bool "1GiB"
 	config MAXPHYSMEM_2GB
-		depends on 64BIT && CMODEL_MEDLOW
+		depends on 64BIT
 		bool "2GiB"
 	config MAXPHYSMEM_128GB
 		depends on 64BIT && CMODEL_MEDANY

arch/riscv/boot/dts/canaan/k210.dtsi

@@ -103,8 +103,8 @@
 		clint0: timer@2000000 {
 			compatible = "canaan,k210-clint", "sifive,clint0";
 			reg = <0x2000000 0xC000>;
-			interrupts-extended = <&cpu0_intc 3 &cpu0_intc 7
-					      &cpu1_intc 3 &cpu1_intc 7>;
+			interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>,
+					      <&cpu1_intc 3>, <&cpu1_intc 7>;
 		};
 
 		plic0: interrupt-controller@c000000 {
@@ -113,7 +113,7 @@
 			compatible = "canaan,k210-plic", "sifive,plic-1.0.0";
 			reg = <0xC000000 0x4000000>;
 			interrupt-controller;
-			interrupts-extended = <&cpu0_intc 11 &cpu1_intc 11>;
+			interrupts-extended = <&cpu0_intc 11>, <&cpu1_intc 11>;
 			riscv,ndev = <65>;
 		};
 
@@ -130,10 +130,11 @@
 			compatible = "canaan,k210-gpiohs", "sifive,gpio0";
 			reg = <0x38001000 0x1000>;
 			interrupt-controller;
-			interrupts = <34 35 36 37 38 39 40 41
-				      42 43 44 45 46 47 48 49
-				      50 51 52 53 54 55 56 57
-				      58 59 60 61 62 63 64 65>;
+			interrupts = <34>, <35>, <36>, <37>, <38>, <39>, <40>,
+				     <41>, <42>, <43>, <44>, <45>, <46>, <47>,
+				     <48>, <49>, <50>, <51>, <52>, <53>, <54>,
+				     <55>, <56>, <57>, <58>, <59>, <60>, <61>,
+				     <62>, <63>, <64>, <65>;
 			gpio-controller;
 			ngpios = <32>;
 		};
@@ -141,7 +142,7 @@
 		dmac0: dma-controller@50000000 {
 			compatible = "snps,axi-dma-1.01a";
 			reg = <0x50000000 0x1000>;
-			interrupts = <27 28 29 30 31 32>;
+			interrupts = <27>, <28>, <29>, <30>, <31>, <32>;
 			#dma-cells = <1>;
 			clocks = <&sysclk K210_CLK_DMA>, <&sysclk K210_CLK_DMA>;
 			clock-names = "core-clk", "cfgr-clk";
@@ -316,7 +317,7 @@
 			timer0: timer@502d0000 {
 				compatible = "snps,dw-apb-timer";
 				reg = <0x502D0000 0x100>;
-				interrupts = <14 15>;
+				interrupts = <14>, <15>;
 				clocks = <&sysclk K210_CLK_TIMER0>,
 					 <&sysclk K210_CLK_APB0>;
 				clock-names = "timer", "pclk";
@@ -326,7 +327,7 @@
 			timer1: timer@502e0000 {
 				compatible = "snps,dw-apb-timer";
 				reg = <0x502E0000 0x100>;
-				interrupts = <16 17>;
+				interrupts = <16>, <17>;
 				clocks = <&sysclk K210_CLK_TIMER1>,
 					 <&sysclk K210_CLK_APB0>;
 				clock-names = "timer", "pclk";
@@ -336,7 +337,7 @@
 			timer2: timer@502f0000 {
 				compatible = "snps,dw-apb-timer";
 				reg = <0x502F0000 0x100>;
-				interrupts = <18 19>;
+				interrupts = <18>, <19>;
 				clocks = <&sysclk K210_CLK_TIMER2>,
 					 <&sysclk K210_CLK_APB0>;
 				clock-names = "timer", "pclk";

arch/riscv/boot/dts/canaan/sipeed_maix_bit.dts

@@ -199,7 +199,7 @@
 };
 
 &spi3 {
-	spi-flash@0 {
+	flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <50000000>;

arch/riscv/boot/dts/canaan/sipeed_maix_dock.dts

@@ -201,7 +201,7 @@
 };
 
 &spi3 {
-	spi-flash@0 {
+	flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <50000000>;

arch/riscv/boot/dts/canaan/sipeed_maix_go.dts

@@ -209,7 +209,7 @@
 };
 
 &spi3 {
-	spi-flash@0 {
+	flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <50000000>;

arch/riscv/boot/dts/canaan/sipeed_maixduino.dts

@@ -174,7 +174,7 @@
 };
 
 &spi3 {
-	spi-flash@0 {
+	flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <50000000>;

arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts

@@ -35,6 +35,10 @@
 	};
 };
 
+&refclk {
+	clock-frequency = <600000000>;
+};
+
 &serial0 {
 	status = "okay";
 };

arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi

@@ -9,9 +9,6 @@
 	model = "Microchip PolarFire SoC";
 	compatible = "microchip,mpfs";
 
-	chosen {
-	};
-
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -142,6 +139,11 @@
 		};
 	};
 
+	refclk: msspllclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+	};
+
 	soc {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -156,62 +158,48 @@
 			cache-size = <2097152>;
 			cache-unified;
 			interrupt-parent = <&plic>;
-			interrupts = <1 2 3>;
+			interrupts = <1>, <2>, <3>;
 			reg = <0x0 0x2010000 0x0 0x1000>;
 		};
 
 		clint@2000000 {
 			compatible = "sifive,fu540-c000-clint", "sifive,clint0";
 			reg = <0x0 0x2000000 0x0 0xC000>;
-			interrupts-extended = <&cpu0_intc 3 &cpu0_intc 7
-						&cpu1_intc 3 &cpu1_intc 7
-						&cpu2_intc 3 &cpu2_intc 7
-						&cpu3_intc 3 &cpu3_intc 7
-						&cpu4_intc 3 &cpu4_intc 7>;
+			interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>,
+					      <&cpu1_intc 3>, <&cpu1_intc 7>,
+					      <&cpu2_intc 3>, <&cpu2_intc 7>,
+					      <&cpu3_intc 3>, <&cpu3_intc 7>,
+					      <&cpu4_intc 3>, <&cpu4_intc 7>;
 		};
 
 		plic: interrupt-controller@c000000 {
-			#interrupt-cells = <1>;
 			compatible = "sifive,fu540-c000-plic", "sifive,plic-1.0.0";
 			reg = <0x0 0xc000000 0x0 0x4000000>;
-			riscv,ndev = <186>;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
 			interrupt-controller;
-			interrupts-extended = <&cpu0_intc 11
-					&cpu1_intc 11 &cpu1_intc 9
-					&cpu2_intc 11 &cpu2_intc 9
-					&cpu3_intc 11 &cpu3_intc 9
-					&cpu4_intc 11 &cpu4_intc 9>;
+			interrupts-extended = <&cpu0_intc 11>,
+					      <&cpu1_intc 11>, <&cpu1_intc 9>,
+					      <&cpu2_intc 11>, <&cpu2_intc 9>,
+					      <&cpu3_intc 11>, <&cpu3_intc 9>,
+					      <&cpu4_intc 11>, <&cpu4_intc 9>;
+			riscv,ndev = <186>;
 		};
 
 		dma@3000000 {
 			compatible = "sifive,fu540-c000-pdma";
 			reg = <0x0 0x3000000 0x0 0x8000>;
 			interrupt-parent = <&plic>;
-			interrupts = <23 24 25 26 27 28 29 30>;
+			interrupts = <23>, <24>, <25>, <26>, <27>, <28>, <29>,
+				     <30>;
 			#dma-cells = <1>;
 		};
 
-		refclk: refclk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <600000000>;
-			clock-output-names = "msspllclk";
-		};
-
 		clkcfg: clkcfg@20002000 {
 			compatible = "microchip,mpfs-clkcfg";
 			reg = <0x0 0x20002000 0x0 0x1000>;
-			reg-names = "mss_sysreg";
 			clocks = <&refclk>;
 			#clock-cells = <1>;
-			clock-output-names = "cpu", "axi", "ahb", "envm",	/* 0-3   */
-				 "mac0", "mac1", "mmc", "timer",		/* 4-7   */
-				"mmuart0", "mmuart1", "mmuart2", "mmuart3",	/* 8-11  */
-				"mmuart4", "spi0", "spi1", "i2c0",		/* 12-15 */
-				"i2c1", "can0", "can1", "usb",			/* 16-19 */
-				"rsvd", "rtc", "qspi", "gpio0",			/* 20-23 */
-				"gpio1", "gpio2", "ddrc", "fic0",		/* 24-27 */
-				"fic1", "fic2", "fic3", "athena", "cfm";	/* 28-32 */
 		};
 
 		serial0: serial@20000000 {
@@ -267,7 +255,7 @@
 			compatible = "microchip,mpfs-sd4hc", "cdns,sd4hc";
 			reg = <0x0 0x20008000 0x0 0x1000>;
 			interrupt-parent = <&plic>;
-			interrupts = <88 89>;
+			interrupts = <88>, <89>;
 			clocks = <&clkcfg 6>;
 			max-frequency = <200000000>;
 			status = "disabled";
@@ -277,7 +265,7 @@
 			compatible = "cdns,macb";
 			reg = <0x0 0x20110000 0x0 0x2000>;
 			interrupt-parent = <&plic>;
-			interrupts = <64 65 66 67>;
+			interrupts = <64>, <65>, <66>, <67>;
 			local-mac-address = [00 00 00 00 00 00];
 			clocks = <&clkcfg 4>, <&clkcfg 2>;
 			clock-names = "pclk", "hclk";
@@ -290,7 +278,7 @@
 			compatible = "cdns,macb";
 			reg = <0x0 0x20112000 0x0 0x2000>;
 			interrupt-parent = <&plic>;
-			interrupts = <70 71 72 73>;
+			interrupts = <70>, <71>, <72>, <73>;
 			local-mac-address = [00 00 00 00 00 00];
 			clocks = <&clkcfg 5>, <&clkcfg 2>;
 			status = "disabled";

arch/riscv/boot/dts/sifive/fu540-c000.dtsi

@@ -137,20 +137,21 @@
 	soc {
 		#address-cells = <2>;
 		#size-cells = <2>;
-		compatible = "sifive,fu540-c000", "sifive,fu540", "simple-bus";
+		compatible = "simple-bus";
 		ranges;
 		plic0: interrupt-controller@c000000 {
-			#interrupt-cells = <1>;
 			compatible = "sifive,fu540-c000-plic", "sifive,plic-1.0.0";
 			reg = <0x0 0xc000000 0x0 0x4000000>;
-			riscv,ndev = <53>;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
 			interrupt-controller;
-			interrupts-extended = <
-				&cpu0_intc 0xffffffff
-				&cpu1_intc 0xffffffff &cpu1_intc 9
-				&cpu2_intc 0xffffffff &cpu2_intc 9
-				&cpu3_intc 0xffffffff &cpu3_intc 9
-				&cpu4_intc 0xffffffff &cpu4_intc 9>;
+			interrupts-extended =
+				<&cpu0_intc 0xffffffff>,
+				<&cpu1_intc 0xffffffff>, <&cpu1_intc 9>,
+				<&cpu2_intc 0xffffffff>, <&cpu2_intc 9>,
+				<&cpu3_intc 0xffffffff>, <&cpu3_intc 9>,
+				<&cpu4_intc 0xffffffff>, <&cpu4_intc 9>;
+			riscv,ndev = <53>;
 		};
 		prci: clock-controller@10000000 {
 			compatible = "sifive,fu540-c000-prci";
@@ -170,7 +171,8 @@
 			compatible = "sifive,fu540-c000-pdma";
 			reg = <0x0 0x3000000 0x0 0x8000>;
 			interrupt-parent = <&plic0>;
-			interrupts = <23 24 25 26 27 28 29 30>;
+			interrupts = <23>, <24>, <25>, <26>, <27>, <28>, <29>,
+				     <30>;
 			#dma-cells = <1>;
 		};
 		uart1: serial@10011000 {
@@ -195,8 +197,8 @@
 		};
 		qspi0: spi@10040000 {
 			compatible = "sifive,fu540-c000-spi", "sifive,spi0";
-			reg = <0x0 0x10040000 0x0 0x1000
-			       0x0 0x20000000 0x0 0x10000000>;
+			reg = <0x0 0x10040000 0x0 0x1000>,
+			      <0x0 0x20000000 0x0 0x10000000>;
 			interrupt-parent = <&plic0>;
 			interrupts = <51>;
 			clocks = <&prci PRCI_CLK_TLCLK>;
@@ -206,8 +208,8 @@
 		};
 		qspi1: spi@10041000 {
 			compatible = "sifive,fu540-c000-spi", "sifive,spi0";
-			reg = <0x0 0x10041000 0x0 0x1000
-			       0x0 0x30000000 0x0 0x10000000>;
+			reg = <0x0 0x10041000 0x0 0x1000>,
+			      <0x0 0x30000000 0x0 0x10000000>;
 			interrupt-parent = <&plic0>;
 			interrupts = <52>;
 			clocks = <&prci PRCI_CLK_TLCLK>;
@@ -229,8 +231,8 @@
 			compatible = "sifive,fu540-c000-gem";
 			interrupt-parent = <&plic0>;
 			interrupts = <53>;
-			reg = <0x0 0x10090000 0x0 0x2000
-			       0x0 0x100a0000 0x0 0x1000>;
+			reg = <0x0 0x10090000 0x0 0x2000>,
+			      <0x0 0x100a0000 0x0 0x1000>;
 			local-mac-address = [00 00 00 00 00 00];
 			clock-names = "pclk", "hclk";
 			clocks = <&prci PRCI_CLK_GEMGXLPLL>,
@@ -243,7 +245,7 @@
 			compatible = "sifive,fu540-c000-pwm", "sifive,pwm0";
 			reg = <0x0 0x10020000 0x0 0x1000>;
 			interrupt-parent = <&plic0>;
-			interrupts = <42 43 44 45>;
+			interrupts = <42>, <43>, <44>, <45>;
 			clocks = <&prci PRCI_CLK_TLCLK>;
 			#pwm-cells = <3>;
 			status = "disabled";
@@ -252,7 +254,7 @@
 			compatible = "sifive,fu540-c000-pwm", "sifive,pwm0";
 			reg = <0x0 0x10021000 0x0 0x1000>;
 			interrupt-parent = <&plic0>;
-			interrupts = <46 47 48 49>;
+			interrupts = <46>, <47>, <48>, <49>;
 			clocks = <&prci PRCI_CLK_TLCLK>;
 			#pwm-cells = <3>;
 			status = "disabled";
@@ -265,7 +267,7 @@
 			cache-size = <2097152>;
 			cache-unified;
 			interrupt-parent = <&plic0>;
-			interrupts = <1 2 3>;
+			interrupts = <1>, <2>, <3>;
 			reg = <0x0 0x2010000 0x0 0x1000>;
 		};
 		gpio: gpio@10060000 {

arch/riscv/boot/dts/sifive/fu740-c000.dtsi

@@ -147,12 +147,12 @@
 			reg = <0x0 0xc000000 0x0 0x4000000>;
 			riscv,ndev = <69>;
 			interrupt-controller;
-			interrupts-extended = <
-				&cpu0_intc 0xffffffff
-				&cpu1_intc 0xffffffff &cpu1_intc 9
-				&cpu2_intc 0xffffffff &cpu2_intc 9
-				&cpu3_intc 0xffffffff &cpu3_intc 9
-				&cpu4_intc 0xffffffff &cpu4_intc 9>;
+			interrupts-extended =
+				<&cpu0_intc 0xffffffff>,
+				<&cpu1_intc 0xffffffff>, <&cpu1_intc 9>,
+				<&cpu2_intc 0xffffffff>, <&cpu2_intc 9>,
+				<&cpu3_intc 0xffffffff>, <&cpu3_intc 9>,
+				<&cpu4_intc 0xffffffff>, <&cpu4_intc 9>;
 		};
 		prci: clock-controller@10000000 {
 			compatible = "sifive,fu740-c000-prci";
@@ -273,7 +273,7 @@
 			cache-size = <2097152>;
 			cache-unified;
 			interrupt-parent = <&plic0>;
-			interrupts = <19 21 22 20>;
+			interrupts = <19>, <21>, <22>, <20>;
 			reg = <0x0 0x2010000 0x0 0x1000>;
 		};
 		gpio: gpio@10060000 {

arch/riscv/configs/defconfig

@@ -2,6 +2,7 @@ CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
+CONFIG_BPF_SYSCALL=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_CGROUPS=y
@@ -13,10 +14,10 @@ CONFIG_USER_NS=y
 CONFIG_CHECKPOINT_RESTORE=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_EXPERT=y
-CONFIG_BPF_SYSCALL=y
+# CONFIG_SYSFS_SYSCALL is not set
+CONFIG_SOC_MICROCHIP_POLARFIRE=y
 CONFIG_SOC_SIFIVE=y
 CONFIG_SOC_VIRT=y
-CONFIG_SOC_MICROCHIP_POLARFIRE=y
 CONFIG_SMP=y
 CONFIG_HOTPLUG_CPU=y
 CONFIG_VIRTUALIZATION=y
@@ -70,14 +71,14 @@ CONFIG_HW_RANDOM=y
 CONFIG_HW_RANDOM_VIRTIO=y
 CONFIG_SPI=y
 CONFIG_SPI_SIFIVE=y
+# CONFIG_PTP_1588_CLOCK is not set
 CONFIG_GPIOLIB=y
 CONFIG_GPIO_SIFIVE=y
-# CONFIG_PTP_1588_CLOCK is not set
-CONFIG_POWER_RESET=y
 CONFIG_DRM=m
 CONFIG_DRM_RADEON=m
 CONFIG_DRM_NOUVEAU=m
 CONFIG_DRM_VIRTIO_GPU=m
+CONFIG_FB=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_USB=y
 CONFIG_USB_XHCI_HCD=y
@@ -88,10 +89,10 @@ CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_HCD_PLATFORM=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_UAS=y
+CONFIG_MMC=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_SDHCI_CADENCE=y
-CONFIG_MMC=y
 CONFIG_MMC_SPI=y
 CONFIG_RTC_CLASS=y
 CONFIG_VIRTIO_PCI=y
@@ -142,5 +143,3 @@ CONFIG_RCU_EQS_DEBUG=y
 # CONFIG_FTRACE is not set
 # CONFIG_RUNTIME_TESTING_MENU is not set
 CONFIG_MEMTEST=y
-# CONFIG_SYSFS_SYSCALL is not set
-CONFIG_EFI=y

arch/riscv/configs/nommu_k210_defconfig

@@ -29,7 +29,6 @@ CONFIG_EMBEDDED=y
 CONFIG_SLOB=y
 # CONFIG_MMU is not set
 CONFIG_SOC_CANAAN=y
-CONFIG_SOC_CANAAN_K210_DTB_SOURCE="k210_generic"
 CONFIG_MAXPHYSMEM_2GB=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
@@ -75,7 +74,6 @@ CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_USER=y
 # CONFIG_VIRTIO_MENU is not set
 # CONFIG_VHOST_MENU is not set
-# CONFIG_SURFACE_PLATFORMS is not set
 # CONFIG_FILE_LOCKING is not set
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY_USER is not set

arch/riscv/configs/nommu_k210_sdcard_defconfig

@@ -21,7 +21,6 @@ CONFIG_EMBEDDED=y
 CONFIG_SLOB=y
 # CONFIG_MMU is not set
 CONFIG_SOC_CANAAN=y
-CONFIG_SOC_CANAAN_K210_DTB_SOURCE="k210_generic"
 CONFIG_MAXPHYSMEM_2GB=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
@@ -30,7 +29,6 @@ CONFIG_CMDLINE_FORCE=y
 # CONFIG_SECCOMP is not set
 # CONFIG_STACKPROTECTOR is not set
 # CONFIG_GCC_PLUGINS is not set
-# CONFIG_BLK_DEV_BSG is not set
 # CONFIG_MQ_IOSCHED_DEADLINE is not set
 # CONFIG_MQ_IOSCHED_KYBER is not set
 CONFIG_BINFMT_FLAT=y
@@ -72,7 +70,6 @@ CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_USER=y
 # CONFIG_VIRTIO_MENU is not set
 # CONFIG_VHOST_MENU is not set
-# CONFIG_SURFACE_PLATFORMS is not set
 CONFIG_EXT2_FS=y
 # CONFIG_FILE_LOCKING is not set
 # CONFIG_DNOTIFY is not set

arch/riscv/configs/nommu_virt_defconfig

@@ -32,7 +32,6 @@ CONFIG_SMP=y
 CONFIG_CMDLINE="root=/dev/vda rw earlycon=uart8250,mmio,0x10000000,115200n8 console=ttyS0"
 CONFIG_CMDLINE_FORCE=y
 CONFIG_JUMP_LABEL=y
-# CONFIG_BLK_DEV_BSG is not set
 CONFIG_PARTITION_ADVANCED=y
 # CONFIG_MSDOS_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set

arch/riscv/configs/rv32_defconfig

@@ -2,6 +2,7 @@ CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
+CONFIG_BPF_SYSCALL=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_CGROUPS=y
@@ -13,7 +14,7 @@ CONFIG_USER_NS=y
 CONFIG_CHECKPOINT_RESTORE=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_EXPERT=y
-CONFIG_BPF_SYSCALL=y
+# CONFIG_SYSFS_SYSCALL is not set
 CONFIG_SOC_SIFIVE=y
 CONFIG_SOC_VIRT=y
 CONFIG_ARCH_RV32I=y
@@ -69,10 +70,10 @@ CONFIG_HW_RANDOM_VIRTIO=y
 CONFIG_SPI=y
 CONFIG_SPI_SIFIVE=y
 # CONFIG_PTP_1588_CLOCK is not set
-CONFIG_POWER_RESET=y
 CONFIG_DRM=y
 CONFIG_DRM_RADEON=y
 CONFIG_DRM_VIRTIO_GPU=y
+CONFIG_FB=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_USB=y
 CONFIG_USB_XHCI_HCD=y
@@ -132,4 +133,3 @@ CONFIG_RCU_EQS_DEBUG=y
 # CONFIG_FTRACE is not set
 # CONFIG_RUNTIME_TESTING_MENU is not set
 CONFIG_MEMTEST=y
-# CONFIG_SYSFS_SYSCALL is not set

arch/riscv/errata/alternative.c

@@ -22,7 +22,8 @@ static struct cpu_manufacturer_info_t {
 } cpu_mfr_info;
 
 static void (*vendor_patch_func)(struct alt_entry *begin, struct alt_entry *end,
-				 unsigned long archid, unsigned long impid);
+				 unsigned long archid,
+				 unsigned long impid) __initdata;
 
 static inline void __init riscv_fill_cpu_mfr_info(void)
 {

arch/riscv/include/asm/Kbuild

@@ -1,6 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0
 generic-y += early_ioremap.h
-generic-y += extable.h
 generic-y += flat.h
 generic-y += kvm_para.h
 generic-y += user.h

arch/riscv/include/asm/asm-extable.h

@@ -0,0 +1,65 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+#ifndef __ASM_ASM_EXTABLE_H
+#define __ASM_ASM_EXTABLE_H
+
+#define EX_TYPE_NONE			0
+#define EX_TYPE_FIXUP			1
+#define EX_TYPE_BPF			2
+#define EX_TYPE_UACCESS_ERR_ZERO	3
+
+#ifdef __ASSEMBLY__
+
+#define __ASM_EXTABLE_RAW(insn, fixup, type, data)	\
+	.pushsection	__ex_table, "a";		\
+	.balign		4;				\
+	.long		((insn) - .);			\
+	.long		((fixup) - .);			\
+	.short		(type);				\
+	.short		(data);				\
+	.popsection;
+
+	.macro		_asm_extable, insn, fixup
+	__ASM_EXTABLE_RAW(\insn, \fixup, EX_TYPE_FIXUP, 0)
+	.endm
+
+#else /* __ASSEMBLY__ */
+
+#include <linux/bits.h>
+#include <linux/stringify.h>
+#include <asm/gpr-num.h>
+
+#define __ASM_EXTABLE_RAW(insn, fixup, type, data)	\
+	".pushsection	__ex_table, \"a\"\n"		\
+	".balign	4\n"				\
+	".long		((" insn ") - .)\n"		\
+	".long		((" fixup ") - .)\n"		\
+	".short		(" type ")\n"			\
+	".short		(" data ")\n"			\
+	".popsection\n"
+
+#define _ASM_EXTABLE(insn, fixup)	\
+	__ASM_EXTABLE_RAW(#insn, #fixup, __stringify(EX_TYPE_FIXUP), "0")
+
+#define EX_DATA_REG_ERR_SHIFT	0
+#define EX_DATA_REG_ERR		GENMASK(4, 0)
+#define EX_DATA_REG_ZERO_SHIFT	5
+#define EX_DATA_REG_ZERO	GENMASK(9, 5)
+
+#define EX_DATA_REG(reg, gpr)						\
+	"((.L__gpr_num_" #gpr ") << " __stringify(EX_DATA_REG_##reg##_SHIFT) ")"
+
+#define _ASM_EXTABLE_UACCESS_ERR_ZERO(insn, fixup, err, zero)		\
+	__DEFINE_ASM_GPR_NUMS						\
+	__ASM_EXTABLE_RAW(#insn, #fixup, 				\
+			  __stringify(EX_TYPE_UACCESS_ERR_ZERO),	\
+			  "("						\
+			    EX_DATA_REG(ERR, err) " | "			\
+			    EX_DATA_REG(ZERO, zero)			\
+			  ")")
+
+#define _ASM_EXTABLE_UACCESS_ERR(insn, fixup, err)			\
+	_ASM_EXTABLE_UACCESS_ERR_ZERO(insn, fixup, err, zero)
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __ASM_ASM_EXTABLE_H */

arch/riscv/include/asm/extable.h

@@ -0,0 +1,48 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_RISCV_EXTABLE_H
+#define _ASM_RISCV_EXTABLE_H
+
+/*
+ * The exception table consists of pairs of relative offsets: the first
+ * is the relative offset to an instruction that is allowed to fault,
+ * and the second is the relative offset at which the program should
+ * continue. No registers are modified, so it is entirely up to the
+ * continuation code to figure out what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path.  This means when everything is well,
+ * we don't even have to jump over them.  Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+
+struct exception_table_entry {
+	int insn, fixup;
+	short type, data;
+};
+
+#define ARCH_HAS_RELATIVE_EXTABLE
+
+#define swap_ex_entry_fixup(a, b, tmp, delta)		\
+do {							\
+	(a)->fixup = (b)->fixup + (delta);		\
+	(b)->fixup = (tmp).fixup - (delta);		\
+	(a)->type = (b)->type;				\
+	(b)->type = (tmp).type;				\
+	(a)->data = (b)->data;				\
+	(b)->data = (tmp).data;				\
+} while (0)
+
+bool fixup_exception(struct pt_regs *regs);
+
+#if defined(CONFIG_BPF_JIT) && defined(CONFIG_ARCH_RV64I)
+bool ex_handler_bpf(const struct exception_table_entry *ex, struct pt_regs *regs);
+#else
+static inline bool
+ex_handler_bpf(const struct exception_table_entry *ex,
+	       struct pt_regs *regs)
+{
+	return false;
+}
+#endif
+
+#endif

arch/riscv/include/asm/futex.h

@@ -11,6 +11,7 @@
 #include <linux/uaccess.h>
 #include <linux/errno.h>
 #include <asm/asm.h>
+#include <asm/asm-extable.h>
 
 /* We don't even really need the extable code, but for now keep it simple */
 #ifndef CONFIG_MMU
@@ -20,23 +21,14 @@
 
 #define __futex_atomic_op(insn, ret, oldval, uaddr, oparg)	\
 {								\
-	uintptr_t tmp;						\
 	__enable_user_access();					\
 	__asm__ __volatile__ (					\
 	"1:	" insn "				\n"	\
 	"2:						\n"	\
-	"	.section .fixup,\"ax\"			\n"	\
-	"	.balign 4				\n"	\
-	"3:	li %[r],%[e]				\n"	\
-	"	jump 2b,%[t]				\n"	\
-	"	.previous				\n"	\
-	"	.section __ex_table,\"a\"		\n"	\
-	"	.balign " RISCV_SZPTR "			\n"	\
-	"	" RISCV_PTR " 1b, 3b			\n"	\
-	"	.previous				\n"	\
+	_ASM_EXTABLE_UACCESS_ERR(1b, 2b, %[r])			\
 	: [r] "+r" (ret), [ov] "=&r" (oldval),			\
-	  [u] "+m" (*uaddr), [t] "=&r" (tmp)			\
-	: [op] "Jr" (oparg), [e] "i" (-EFAULT)			\
+	  [u] "+m" (*uaddr)					\
+	: [op] "Jr" (oparg)					\
 	: "memory");						\
 	__disable_user_access();				\
 }
@@ -98,18 +90,10 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
 	"2:	sc.w.aqrl %[t],%z[nv],%[u]		\n"
 	"	bnez %[t],1b				\n"
 	"3:						\n"
-	"	.section .fixup,\"ax\"			\n"
-	"	.balign 4				\n"
-	"4:	li %[r],%[e]				\n"
-	"	jump 3b,%[t]				\n"
-	"	.previous				\n"
-	"	.section __ex_table,\"a\"		\n"
-	"	.balign " RISCV_SZPTR "			\n"
-	"	" RISCV_PTR " 1b, 4b			\n"
-	"	" RISCV_PTR " 2b, 4b			\n"
-	"	.previous				\n"
+		_ASM_EXTABLE_UACCESS_ERR(1b, 3b, %[r])	\
+		_ASM_EXTABLE_UACCESS_ERR(2b, 3b, %[r])	\
 	: [r] "+r" (ret), [v] "=&r" (val), [u] "+m" (*uaddr), [t] "=&r" (tmp)
-	: [ov] "Jr" (oldval), [nv] "Jr" (newval), [e] "i" (-EFAULT)
+	: [ov] "Jr" (oldval), [nv] "Jr" (newval)
 	: "memory");
 	__disable_user_access();