mirror of
https://github.com/linux-msm/laptops-kernel.git
synced 2026-08-13 14:19:53 -07:00
counter: 104-quad-8: Remove IIO counter ABI
The IIO counter driver has been superseded by the Counter subsystem as discussed in [1]. This patch removes the IIO counter ABI from the 104-QUAD-8 driver. [1] https://lore.kernel.org/lkml/20210119104105.000010df@Huawei.com/ Cc: Syed Nayyar Waris <syednwaris@gmail.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Link: https://lore.kernel.org/r/98a39983d5df761c058a469d1346fd8ffdef8516.1611973018.git.vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This commit is contained in:
William Breathitt Gray
committed by
Jonathan Cameron
Jonathan Cameron
parent
01f68f067d
commit
e357e81fcf
@@ -1,133 +0,0 @@
|
||||
What: /sys/bus/iio/devices/iio:deviceX/in_count_count_mode_available
|
||||
What: /sys/bus/iio/devices/iio:deviceX/in_count_noise_error_available
|
||||
What: /sys/bus/iio/devices/iio:deviceX/in_count_quadrature_mode_available
|
||||
What: /sys/bus/iio/devices/iio:deviceX/in_index_index_polarity_available
|
||||
What: /sys/bus/iio/devices/iio:deviceX/in_index_synchronous_mode_available
|
||||
KernelVersion: 4.10
|
||||
Contact: linux-iio@vger.kernel.org
|
||||
Description:
|
||||
This interface is deprecated; please use the Counter subsystem.
|
||||
|
||||
Discrete set of available values for the respective counter
|
||||
configuration are listed in this file.
|
||||
|
||||
What: /sys/bus/iio/devices/iio:deviceX/in_countY_count_mode
|
||||
KernelVersion: 4.10
|
||||
Contact: linux-iio@vger.kernel.org
|
||||
Description:
|
||||
This interface is deprecated; please use the Counter subsystem.
|
||||
|
||||
Count mode for channel Y. Four count modes are available:
|
||||
normal, range limit, non-recycle, and modulo-n. The preset value
|
||||
for channel Y is used by the count mode where required.
|
||||
|
||||
Normal:
|
||||
Counting is continuous in either direction.
|
||||
|
||||
Range Limit:
|
||||
An upper or lower limit is set, mimicking limit switches
|
||||
in the mechanical counterpart. The upper limit is set to
|
||||
the preset value, while the lower limit is set to 0. The
|
||||
counter freezes at count = preset when counting up, and
|
||||
at count = 0 when counting down. At either of these
|
||||
limits, the counting is resumed only when the count
|
||||
direction is reversed.
|
||||
|
||||
Non-recycle:
|
||||
Counter is disabled whenever a 24-bit count overflow or
|
||||
underflow takes place. The counter is re-enabled when a
|
||||
new count value is loaded to the counter via a preset
|
||||
operation or write to raw.
|
||||
|
||||
Modulo-N:
|
||||
A count boundary is set between 0 and the preset value.
|
||||
The counter is reset to 0 at count = preset when
|
||||
counting up, while the counter is set to the preset
|
||||
value at count = 0 when counting down; the counter does
|
||||
not freeze at the bundary points, but counts
|
||||
continuously throughout.
|
||||
|
||||
What: /sys/bus/iio/devices/iio:deviceX/in_countY_noise_error
|
||||
KernelVersion: 4.10
|
||||
Contact: linux-iio@vger.kernel.org
|
||||
Description:
|
||||
This interface is deprecated; please use the Counter subsystem.
|
||||
|
||||
Read-only attribute that indicates whether excessive noise is
|
||||
present at the channel Y count inputs in quadrature clock mode;
|
||||
irrelevant in non-quadrature clock mode.
|
||||
|
||||
What: /sys/bus/iio/devices/iio:deviceX/in_countY_preset
|
||||
KernelVersion: 4.10
|
||||
Contact: linux-iio@vger.kernel.org
|
||||
Description:
|
||||
This interface is deprecated; please use the Counter subsystem.
|
||||
|
||||
If the counter device supports preset registers, the preset
|
||||
count for channel Y is provided by this attribute.
|
||||
|
||||
What: /sys/bus/iio/devices/iio:deviceX/in_countY_quadrature_mode
|
||||
KernelVersion: 4.10
|
||||
Contact: linux-iio@vger.kernel.org
|
||||
Description:
|
||||
This interface is deprecated; please use the Counter subsystem.
|
||||
|
||||
Configure channel Y counter for non-quadrature or quadrature
|
||||
clock mode. Selecting non-quadrature clock mode will disable
|
||||
synchronous load mode. In quadrature clock mode, the channel Y
|
||||
scale attribute selects the encoder phase division (scale of 1
|
||||
selects full-cycle, scale of 0.5 selects half-cycle, scale of
|
||||
0.25 selects quarter-cycle) processed by the channel Y counter.
|
||||
|
||||
Non-quadrature:
|
||||
The filter and decoder circuit are bypassed. Encoder A
|
||||
input serves as the count input and B as the UP/DOWN
|
||||
direction control input, with B = 1 selecting UP Count
|
||||
mode and B = 0 selecting Down Count mode.
|
||||
|
||||
Quadrature:
|
||||
Encoder A and B inputs are digitally filtered and
|
||||
decoded for UP/DN clock.
|
||||
|
||||
What: /sys/bus/iio/devices/iio:deviceX/in_countY_set_to_preset_on_index
|
||||
KernelVersion: 4.10
|
||||
Contact: linux-iio@vger.kernel.org
|
||||
Description:
|
||||
This interface is deprecated; please use the Counter subsystem.
|
||||
|
||||
Whether to set channel Y counter with channel Y preset value
|
||||
when channel Y index input is active, or continuously count.
|
||||
Valid attribute values are boolean.
|
||||
|
||||
What: /sys/bus/iio/devices/iio:deviceX/in_indexY_index_polarity
|
||||
KernelVersion: 4.10
|
||||
Contact: linux-iio@vger.kernel.org
|
||||
Description:
|
||||
This interface is deprecated; please use the Counter subsystem.
|
||||
|
||||
Active level of channel Y index input; irrelevant in
|
||||
non-synchronous load mode.
|
||||
|
||||
What: /sys/bus/iio/devices/iio:deviceX/in_indexY_synchronous_mode
|
||||
KernelVersion: 4.10
|
||||
Contact: linux-iio@vger.kernel.org
|
||||
Description:
|
||||
This interface is deprecated; please use the Counter subsystem.
|
||||
|
||||
Configure channel Y counter for non-synchronous or synchronous
|
||||
load mode. Synchronous load mode cannot be selected in
|
||||
non-quadrature clock mode.
|
||||
|
||||
Non-synchronous:
|
||||
A logic low level is the active level at this index
|
||||
input. The index function (as enabled via
|
||||
set_to_preset_on_index) is performed directly on the
|
||||
active level of the index input.
|
||||
|
||||
Synchronous:
|
||||
Intended for interfacing with encoder Index output in
|
||||
quadrature clock mode. The active level is configured
|
||||
via index_polarity. The index function (as enabled via
|
||||
set_to_preset_on_index) is performed synchronously with
|
||||
the quadrature clock on the active level of the index
|
||||
input.
|
||||
@@ -300,7 +300,6 @@ M: Syed Nayyar Waris <syednwaris@gmail.com>
|
||||
L: linux-iio@vger.kernel.org
|
||||
S: Maintained
|
||||
F: Documentation/ABI/testing/sysfs-bus-counter-104-quad-8
|
||||
F: Documentation/ABI/testing/sysfs-bus-iio-counter-104-quad-8
|
||||
F: drivers/counter/104-quad-8.c
|
||||
|
||||
ACCES PCI-IDIO-16 GPIO DRIVER
|
||||
|
||||
+64
-589
File diff suppressed because it is too large
Load Diff
@@ -14,7 +14,7 @@ if COUNTER
|
||||
|
||||
config 104_QUAD_8
|
||||
tristate "ACCES 104-QUAD-8 driver"
|
||||
depends on PC104 && X86 && IIO
|
||||
depends on PC104 && X86
|
||||
select ISA_BUS_API
|
||||
help
|
||||
Say yes here to build support for the ACCES 104-QUAD-8 quadrature
|
||||
|
||||
Reference in New Issue
Block a user