Merge tag 'v6.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into gpio/for-next

Linux 6.17-rc5
This commit is contained in:
Bartosz Golaszewski committed 2025-09-08 09:16:23 +02:00
commit e10a7cf4f6
1111 files changed
+13691 -6187

No files matched your search

+3
View File
@@ -226,6 +226,8 @@ Domen Puncer <domen@coderock.org>
Douglas Gilbert <dougg@torque.net>
Drew Fustini <fustini@kernel.org> <drew@pdp7.com>
<duje@dujemihanovic.xyz> <duje.mihanovic@skole.hr>
Easwar Hariharan <easwar.hariharan@linux.microsoft.com> <easwar.hariharan@intel.com>
Easwar Hariharan <easwar.hariharan@linux.microsoft.com> <eahariha@linux.microsoft.com>
Ed L. Cashin <ecashin@coraid.com>
Elliot Berman <quic_eberman@quicinc.com> <eberman@codeaurora.org>
Enric Balletbo i Serra <eballetbo@kernel.org> <enric.balletbo@collabora.com>
@@ -587,6 +589,7 @@ Nikolay Aleksandrov <razor@blackwall.org> <nikolay@redhat.com>
Nikolay Aleksandrov <razor@blackwall.org> <nikolay@cumulusnetworks.com>
Nikolay Aleksandrov <razor@blackwall.org> <nikolay@nvidia.com>
Nikolay Aleksandrov <razor@blackwall.org> <nikolay@isovalent.com>
Nobuhiro Iwamatsu <nobuhiro.iwamatsu.x90@mail.toshiba> <nobuhiro1.iwamatsu@toshiba.co.jp>
Odelu Kukatla <quic_okukatla@quicinc.com> <okukatla@codeaurora.org>
Oleksandr Natalenko <oleksandr@natalenko.name> <oleksandr@redhat.com>
Oleksij Rempel <linux@rempel-privat.de> <bug-track@fisher-privat.net>
+7
View File
@@ -3222,6 +3222,10 @@ D: AIC5800 IEEE 1394, RAW I/O on 1394
D: Starter of Linux1394 effort
S: ask per mail for current address
N: Boris Pismenny
E: borisp@mellanox.com
D: Kernel TLS implementation and offload support.
N: Nicolas Pitre
E: nico@fluxnic.net
D: StrongARM SA1100 support integrator & hacker
@@ -4168,6 +4172,9 @@ S: 1513 Brewster Dr.
S: Carrollton, TX 75010
S: USA
N: Dave Watson
D: Kernel TLS implementation.
N: Tim Waugh
E: tim@cyberelk.net
D: Co-architect of the parallel-port sharing system
+1 -1
View File
@@ -731,7 +731,7 @@ Contact: linux-block@vger.kernel.org
Description:
[RW] If the device is registered for writeback throttling, then
this file shows the target minimum read latency. If this latency
is exceeded in a given window of time (see wb_window_usec), then
is exceeded in a given window of time (see curr_win_nsec), then
the writeback throttling will start scaling back writes. Writing
a value of '0' to this file disables the feature. Writing a
value of '-1' to this file resets the value to the default
@@ -79,7 +79,7 @@ zone_capacity_mb Device zone capacity (must always be equal to or lower than
the zone size. Default: zone size.
conv_zones Total number of conventioanl zones starting from sector 0.
Default: 8.
base_dir Path to the base directoy where to create the directory
base_dir Path to the base directory where to create the directory
containing the zone files of the device.
Default=/var/local/zloop.
The device directory containing the zone files is always
+2 -2
View File
@@ -435,8 +435,8 @@ both cgroups.
Controlling Controllers
-----------------------
Availablity
~~~~~~~~~~~
Availability
~~~~~~~~~~~~
A controller is available in a cgroup when it is supported by the kernel (i.e.,
compiled in, not disabled and not attached to a v1 hierarchy) and listed in the
@@ -214,8 +214,8 @@ Spectre_v1 X
Spectre_v2 X X
Spectre_v2_user X X * (Note 1)
SRBDS X X X X
SRSO X X
SSB (Note 4)
SRSO X X X X
SSB X
TAA X X X X * (Note 2)
TSA X X X X
=============== ============== ============ ============= ============== ============ ========
@@ -229,9 +229,6 @@ Notes:
3 -- Disables SMT if cross-thread mitigations are fully enabled, the CPU is
vulnerable, and STIBP is not supported
4 -- Speculative store bypass is always enabled by default (no kernel
mitigation applied) unless overridden with spec_store_bypass_disable option
When an attack-vector is disabled, all mitigations for the vulnerabilities
listed in the above table are disabled, unless mitigation is required for a
different enabled attack-vector or a mitigation is explicitly selected via a
+6 -5
View File
@@ -76,20 +76,21 @@ unit as preprocessor statement. The above example would then read::
within the corresponding compilation unit before the #include for
<linux/export.h>. Typically it's placed before the first #include statement.
Using the EXPORT_SYMBOL_GPL_FOR_MODULES() macro
-----------------------------------------------
Using the EXPORT_SYMBOL_FOR_MODULES() macro
-------------------------------------------
Symbols exported using this macro are put into a module namespace. This
namespace cannot be imported.
namespace cannot be imported. These exports are GPL-only as they are only
intended for in-tree modules.
The macro takes a comma separated list of module names, allowing only those
modules to access this symbol. Simple tail-globs are supported.
For example::
EXPORT_SYMBOL_GPL_FOR_MODULES(preempt_notifier_inc, "kvm,kvm-*")
EXPORT_SYMBOL_FOR_MODULES(preempt_notifier_inc, "kvm,kvm-*")
will limit usage of this symbol to modules whoes name matches the given
will limit usage of this symbol to modules whose name matches the given
patterns.
How to use Symbols exported in Namespaces
@@ -60,7 +60,6 @@ properties:
- const: bus
- const: core
- const: vsync
- const: lut
- const: tbu
- const: tbu_rt
# MSM8996 has additional iommu clock
@@ -62,11 +62,13 @@ properties:
items:
- description: GMAC main clock
- description: Peripheral registers interface clock
- description: APB glue registers interface clock
clock-names:
items:
- const: stmmaceth
- const: pclk
- const: apb
interrupts:
items:
@@ -88,8 +90,8 @@ examples:
compatible = "thead,th1520-gmac", "snps,dwmac-3.70a";
reg = <0xe7070000 0x2000>, <0xec003000 0x1000>;
reg-names = "dwmac", "apb";
clocks = <&clk 1>, <&clk 2>;
clock-names = "stmmaceth", "pclk";
clocks = <&clk 1>, <&clk 2>, <&clk 3>;
clock-names = "stmmaceth", "pclk", "apb";
interrupts = <66>;
interrupt-names = "macirq";
phy-mode = "rgmii-id";
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: Infineon Buck Regulators with PMBUS interfaces
maintainers:
- Not Me.
- Guenter Roeck <linux@roeck-us.net>
allOf:
- $ref: regulator.yaml#
@@ -20,6 +20,7 @@ properties:
- enum:
- fsl,imx7ulp-spi
- fsl,imx8qxp-spi
- nxp,s32g2-lpspi
- items:
- enum:
- fsl,imx8ulp-spi
@@ -27,6 +28,10 @@ properties:
- fsl,imx94-spi
- fsl,imx95-spi
- const: fsl,imx7ulp-spi
- items:
- const: nxp,s32g3-lpspi
- const: nxp,s32g2-lpspi
reg:
maxItems: 1
@@ -507,6 +507,8 @@ patternProperties:
description: Espressif Systems Co. Ltd.
"^est,.*":
description: ESTeem Wireless Modems
"^eswin,.*":
description: Beijing ESWIN Technology Group Co. Ltd.
"^ettus,.*":
description: NI Ettus Research
"^eukrea,.*":
+1 -1
View File
@@ -1420,7 +1420,7 @@ udp_hash_entries - INTEGER
A negative value means the networking namespace does not own its
hash buckets and shares the initial networking namespace's one.
udp_child_ehash_entries - INTEGER
udp_child_hash_entries - INTEGER
Control the number of hash buckets for UDP sockets in the child
networking namespace, which must be set before clone() or unshare().
@@ -12,6 +12,8 @@ add_addr_timeout - INTEGER (seconds)
resent to an MPTCP peer that has not acknowledged a previous
ADD_ADDR message.
Do not retransmit if set to 0.
The default value matches TCP_RTO_MAX. This is a per-namespace
sysctl.
+2 -3
View File
@@ -433,9 +433,8 @@ Threaded NAPI
Threaded NAPI is an operating mode that uses dedicated kernel
threads rather than software IRQ context for NAPI processing.
The configuration is per netdevice and will affect all
NAPI instances of that device. Each NAPI instance will spawn a separate
thread (called ``napi/${ifc-name}-${napi-id}``).
Each threaded NAPI instance will spawn a separate thread
(called ``napi/${ifc-name}-${napi-id}``).
It is recommended to pin each kernel thread to a single CPU, the same
CPU as the CPU which services the interrupt. Note that the mapping
+16 -9
View File
@@ -8,8 +8,22 @@ like to know when a security bug is found so that it can be fixed and
disclosed as quickly as possible. Please report security bugs to the
Linux kernel security team.
Contact
-------
The security team and maintainers almost always require additional
information beyond what was initially provided in a report and rely on
active and efficient collaboration with the reporter to perform further
testing (e.g., verifying versions, configuration options, mitigations, or
patches). Before contacting the security team, the reporter must ensure
they are available to explain their findings, engage in discussions, and
run additional tests. Reports where the reporter does not respond promptly
or cannot effectively discuss their findings may be abandoned if the
communication does not quickly improve.
As it is with any bug, the more information provided the easier it
will be to diagnose and fix. Please review the procedure outlined in
'Documentation/admin-guide/reporting-issues.rst' if you are unclear about what
information is helpful. Any exploit code is very helpful and will not
be released without consent from the reporter unless it has already been
made public.
The Linux kernel security team can be contacted by email at
<security@kernel.org>. This is a private list of security officers
@@ -19,13 +33,6 @@ that can speed up the process considerably. It is possible that the
security team will bring in extra help from area maintainers to
understand and fix the security vulnerability.
As it is with any bug, the more information provided the easier it
will be to diagnose and fix. Please review the procedure outlined in
'Documentation/admin-guide/reporting-issues.rst' if you are unclear about what
information is helpful. Any exploit code is very helpful and will not
be released without consent from the reporter unless it has already been
made public.
Please send plain text emails without attachments where possible.
It is much harder to have a context-quoted discussion about a complex
issue if all the details are hidden away in attachments. Think of it like a
+25 -4
View File
@@ -2253,8 +2253,15 @@ device_setup
Default: 0x0000
ignore_ctl_error
Ignore any USB-controller regarding mixer interface (default: no)
``ignore_ctl_error=1`` may help when you get an error at accessing
the mixer element such as URB error -22. This happens on some
buggy USB device or the controller. This workaround corresponds to
the ``quirk_flags`` bit 14, too.
autoclock
Enable auto-clock selection for UAC2 devices (default: yes)
lowlatency
Enable low latency playback mode (default: yes).
Could disable it to switch back to the old mode if face a regression.
quirk_alias
Quirk alias list, pass strings like ``0123abcd:5678beef``, which
applies the existing quirk for the device 5678:beef to a new
@@ -2284,6 +2291,11 @@ delayed_register
The driver prints a message like "Found post-registration device
assignment: 1234abcd:04" for such a device, so that user can
notice the need.
skip_validation
Skip unit descriptor validation (default: no).
The option is used to ignores the validation errors with the hexdump
of the unit descriptor instead of a driver probe error, so that we
can check its details.
quirk_flags
Contains the bit flags for various device specific workarounds.
Applied to the corresponding card index.
@@ -2307,6 +2319,16 @@ quirk_flags
* bit 16: Set up the interface at first like UAC1
* bit 17: Apply the generic implicit feedback sync mode
* bit 18: Don't apply implicit feedback sync mode
* bit 19: Don't closed interface during setting sample rate
* bit 20: Force an interface reset whenever stopping & restarting
a stream
* bit 21: Do not set PCM rate (frequency) when only one rate is
available for the given endpoint.
* bit 22: Set the fixed resolution 16 for Mic Capture Volume
* bit 23: Set the fixed resolution 384 for Mic Capture Volume
* bit 24: Set minimum volume control value as mute for devices
where the lowest playback value represents muted state instead
of minimum audible volume
This module supports multiple devices, autoprobe and hotplugging.
@@ -2314,10 +2336,9 @@ NB: ``nrpacks`` parameter can be modified dynamically via sysfs.
Don't put the value over 20. Changing via sysfs has no sanity
check.
NB: ``ignore_ctl_error=1`` may help when you get an error at accessing
the mixer element such as URB error -22. This happens on some
buggy USB device or the controller. This workaround corresponds to
the ``quirk_flags`` bit 14, too.
NB: ``ignore_ctl_error=1`` just provides a quick way to work around the
issues. If you have a buggy device that requires these quirks, please
report it to the upstream.
NB: ``quirk_alias`` option is provided only for testing / development.
If you want to have a proper support, contact to upstream for
+2 -2
View File
@@ -43,7 +43,7 @@ Following IOMMUFD objects are exposed to userspace:
- IOMMUFD_OBJ_HWPT_PAGING, representing an actual hardware I/O page table
(i.e. a single struct iommu_domain) managed by the iommu driver. "PAGING"
primarly indicates this type of HWPT should be linked to an IOAS. It also
primarily indicates this type of HWPT should be linked to an IOAS. It also
indicates that it is backed by an iommu_domain with __IOMMU_DOMAIN_PAGING
feature flag. This can be either an UNMANAGED stage-1 domain for a device
running in the user space, or a nesting parent stage-2 domain for mappings
@@ -76,7 +76,7 @@ Following IOMMUFD objects are exposed to userspace:
* Security namespace for guest owned ID, e.g. guest-controlled cache tags
* Non-device-affiliated event reporting, e.g. invalidation queue errors
* Access to a sharable nesting parent pagetable across physical IOMMUs
* Access to a shareable nesting parent pagetable across physical IOMMUs
* Virtualization of various platforms IDs, e.g. RIDs and others
* Delivery of paravirtualized invalidation
* Direct assigned invalidation queues
+55 -20
View File
@@ -931,13 +931,13 @@ F: Documentation/devicetree/bindings/dma/altr,msgdma.yaml
F: drivers/dma/altera-msgdma.c
ALTERA PIO DRIVER
M: Mun Yew Tham <mun.yew.tham@intel.com>
M: Adrian Ng <adrianhoyin.ng@altera.com>
L: linux-gpio@vger.kernel.org
S: Maintained
F: drivers/gpio/gpio-altera.c
ALTERA TRIPLE SPEED ETHERNET DRIVER
M: Joyce Ooi <joyce.ooi@intel.com>
M: Boon Khai Ng <boon.khai.ng@altera.com>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/ethernet/altera/
@@ -3526,7 +3526,7 @@ F: Documentation/devicetree/bindings/arm/ti/nspire.yaml
F: arch/arm/boot/dts/nspire/
ARM/TOSHIBA VISCONTI ARCHITECTURE
M: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
M: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.x90@mail.toshiba>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Supported
T: git git://git.kernel.org/pub/scm/linux/kernel/git/iwamatsu/linux-visconti.git
@@ -3667,6 +3667,7 @@ F: drivers/virt/coco/arm-cca-guest/
F: drivers/virt/coco/pkvm-guest/
F: tools/testing/selftests/arm64/
X: arch/arm64/boot/dts/
X: arch/arm64/configs/defconfig
ARROW SPEEDCHIPS XRS7000 SERIES ETHERNET SWITCH DRIVER
M: George McCollister <george.mccollister@gmail.com>
@@ -4205,7 +4206,7 @@ W: http://www.baycom.org/~tom/ham/ham.html
F: drivers/net/hamradio/baycom*
BCACHE (BLOCK LAYER CACHE)
M: Coly Li <colyli@kernel.org>
M: Coly Li <colyli@fnnas.com>
M: Kent Overstreet <kent.overstreet@linux.dev>
L: linux-bcache@vger.kernel.org
S: Maintained
@@ -4216,7 +4217,7 @@ F: drivers/md/bcache/
BCACHEFS
M: Kent Overstreet <kent.overstreet@linux.dev>
L: linux-bcachefs@vger.kernel.org
S: Supported
S: Externally maintained
C: irc://irc.oftc.net/bcache
P: Documentation/filesystems/bcachefs/SubmittingPatches.rst
T: git https://evilpiepirate.org/git/bcachefs.git
@@ -7820,7 +7821,7 @@ Q: https://patchwork.freedesktop.org/project/nouveau/
Q: https://gitlab.freedesktop.org/drm/nouveau/-/merge_requests
B: https://gitlab.freedesktop.org/drm/nouveau/-/issues
C: irc://irc.oftc.net/nouveau
T: git https://gitlab.freedesktop.org/drm/nouveau.git
T: git https://gitlab.freedesktop.org/drm/misc/kernel.git
F: drivers/gpu/drm/nouveau/
F: include/uapi/drm/nouveau_drm.h
@@ -8426,6 +8427,17 @@ T: git https://gitlab.freedesktop.org/drm/misc/kernel.git
F: drivers/gpu/drm/scheduler/
F: include/drm/gpu_scheduler.h
DRM GPUVM
M: Danilo Krummrich <dakr@kernel.org>
R: Matthew Brost <matthew.brost@intel.com>
R: Thomas Hellström <thomas.hellstrom@linux.intel.com>
R: Alice Ryhl <aliceryhl@google.com>
L: dri-devel@lists.freedesktop.org
S: Supported
T: git https://gitlab.freedesktop.org/drm/misc/kernel.git
F: drivers/gpu/drm/drm_gpuvm.c
F: include/drm/drm_gpuvm.h
DRM LOG
M: Jocelyn Falempe <jfalempe@redhat.com>
M: Javier Martinez Canillas <javierm@redhat.com>
@@ -10377,7 +10389,7 @@ S: Maintained
F: drivers/input/touchscreen/goodix*
GOOGLE ETHERNET DRIVERS
M: Jeroen de Borst <jeroendb@google.com>
M: Joshua Washington <joshwash@google.com>
M: Harshitha Ramamurthy <hramamurthy@google.com>
L: netdev@vger.kernel.org
S: Maintained
@@ -10655,7 +10667,8 @@ S: Maintained
F: block/partitions/efi.*
HABANALABS PCI DRIVER
M: Yaron Avizrat <yaron.avizrat@intel.com>
M: Koby Elbaz <koby.elbaz@intel.com>
M: Konstantin Sinyuk <konstantin.sinyuk@intel.com>
L: dri-devel@lists.freedesktop.org
S: Supported
C: irc://irc.oftc.net/dri-devel
@@ -11013,7 +11026,7 @@ F: Documentation/admin-guide/perf/hns3-pmu.rst
F: drivers/perf/hisilicon/hns3_pmu.c
HISILICON I2C CONTROLLER DRIVER
M: Yicong Yang <yangyicong@hisilicon.com>
M: Devyn Liu <liudingyuan@h-partners.com>
L: linux-i2c@vger.kernel.org
S: Maintained
W: https://www.hisilicon.com
@@ -11438,6 +11451,7 @@ F: drivers/tty/hvc/
HUNG TASK DETECTOR
M: Andrew Morton <akpm@linux-foundation.org>
R: Lance Yang <lance.yang@linux.dev>
R: Masami Hiramatsu <mhiramat@kernel.org>
L: linux-kernel@vger.kernel.org
S: Maintained
F: include/linux/hung_task.h
@@ -12280,7 +12294,6 @@ F: include/linux/avf/virtchnl.h
F: include/linux/net/intel/*/
INTEL ETHERNET PROTOCOL DRIVER FOR RDMA
M: Mustafa Ismail <mustafa.ismail@intel.com>
M: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
L: linux-rdma@vger.kernel.org
S: Supported
@@ -12583,10 +12596,9 @@ S: Supported
F: drivers/cpufreq/intel_pstate.c
INTEL PTP DFL ToD DRIVER
M: Tianfei Zhang <tianfei.zhang@intel.com>
L: linux-fpga@vger.kernel.org
L: netdev@vger.kernel.org
S: Maintained
S: Orphan
F: drivers/ptp/ptp_dfl_tod.c
INTEL QUADRATURE ENCODER PERIPHERAL DRIVER
@@ -12724,9 +12736,8 @@ S: Maintained
F: drivers/platform/x86/intel/wmi/thunderbolt.c
INTEL WWAN IOSM DRIVER
M: M Chetan Kumar <m.chetan.kumar@intel.com>
L: netdev@vger.kernel.org
S: Maintained
S: Orphan
F: drivers/net/wwan/iosm/
INTEL(R) FLEXIBLE RETURN AND EVENT DELIVERY
@@ -13686,7 +13697,6 @@ F: scripts/Makefile.kmsan
KPROBES
M: Naveen N Rao <naveen@kernel.org>
M: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
M: "David S. Miller" <davem@davemloft.net>
M: Masami Hiramatsu <mhiramat@kernel.org>
L: linux-kernel@vger.kernel.org
@@ -15674,7 +15684,6 @@ MEDIATEK T7XX 5G WWAN MODEM DRIVER
M: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com>
R: Chiranjeevi Rapolu <chiranjeevi.rapolu@linux.intel.com>
R: Liu Haijun <haijun.liu@mediatek.com>
R: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
R: Ricardo Martinez <ricardo.martinez@linux.intel.com>
L: netdev@vger.kernel.org
S: Supported
@@ -16061,6 +16070,23 @@ F: mm/mempolicy.c
F: mm/migrate.c
F: mm/migrate_device.c
MEMORY MANAGEMENT - MGLRU (MULTI-GEN LRU)
M: Andrew Morton <akpm@linux-foundation.org>
M: Axel Rasmussen <axelrasmussen@google.com>
M: Yuanchu Xie <yuanchu@google.com>
R: Wei Xu <weixugc@google.com>
L: linux-mm@kvack.org
S: Maintained
W: http://www.linux-mm.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
F: Documentation/admin-guide/mm/multigen_lru.rst
F: Documentation/mm/multigen_lru.rst
F: include/linux/mm_inline.h
F: include/linux/mmzone.h
F: mm/swap.c
F: mm/vmscan.c
F: mm/workingset.c
MEMORY MANAGEMENT - MISC
M: Andrew Morton <akpm@linux-foundation.org>
M: David Hildenbrand <david@redhat.com>
@@ -16251,8 +16277,10 @@ S: Maintained
W: http://www.linux-mm.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
F: rust/helpers/mm.c
F: rust/helpers/page.c
F: rust/kernel/mm.rs
F: rust/kernel/mm/
F: rust/kernel/page.rs
MEMORY MAPPING
M: Andrew Morton <akpm@linux-foundation.org>
@@ -17451,6 +17479,7 @@ F: drivers/net/ethernet/neterion/
NETFILTER
M: Pablo Neira Ayuso <pablo@netfilter.org>
M: Jozsef Kadlecsik <kadlec@netfilter.org>
M: Florian Westphal <fw@strlen.de>
L: netfilter-devel@vger.kernel.org
L: coreteam@netfilter.org
S: Maintained
@@ -17820,9 +17849,9 @@ F: net/ipv6/syncookies.c
F: net/ipv6/tcp*.c
NETWORKING [TLS]
M: Boris Pismenny <borisp@nvidia.com>
M: John Fastabend <john.fastabend@gmail.com>
M: Jakub Kicinski <kuba@kernel.org>
M: Sabrina Dubroca <sd@queasysnail.net>
L: netdev@vger.kernel.org
S: Maintained
F: include/net/tls.h
@@ -20850,8 +20879,8 @@ S: Maintained
F: drivers/firmware/qcom/qcom_qseecom_uefisecapp.c
QUALCOMM RMNET DRIVER
M: Subash Abhinov Kasiviswanathan <quic_subashab@quicinc.com>
M: Sean Tranchetti <quic_stranche@quicinc.com>
M: Subash Abhinov Kasiviswanathan <subash.a.kasiviswanathan@oss.qualcomm.com>
M: Sean Tranchetti <sean.tranchetti@oss.qualcomm.com>
L: netdev@vger.kernel.org
S: Maintained
F: Documentation/networking/device_drivers/cellular/qualcomm/rmnet.rst
@@ -22176,7 +22205,7 @@ F: arch/s390/mm
S390 NETWORK DRIVERS
M: Alexandra Winter <wintera@linux.ibm.com>
M: Thorsten Winkler <twinkler@linux.ibm.com>
R: Aswin Karuvally <aswin@linux.ibm.com>
L: linux-s390@vger.kernel.org
L: netdev@vger.kernel.org
S: Supported
@@ -24225,6 +24254,12 @@ S: Maintained
F: Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml
F: drivers/input/keyboard/sun4i-lradc-keys.c
SUNDANCE NETWORK DRIVER
M: Denis Kirjanov <dkirjanov@suse.de>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/ethernet/dlink/sundance.c
SUNPLUS ETHERNET DRIVER
M: Wells Lu <wellslutw@gmail.com>
L: netdev@vger.kernel.org
+1 -1
View File
@@ -2,7 +2,7 @@
VERSION = 6
PATCHLEVEL = 17
SUBLEVEL = 0
EXTRAVERSION = -rc1
EXTRAVERSION = -rc5
NAME = Baby Opossum Posse
# *DOCUMENTATION*
Loaded 20 of 1111 files, more files were not shown because too many files have changed in this diff. Show more