Merge tag 'gcc-minimum-version-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic

Pull compiler version requirement update from Arnd Bergmann:
 "Require gcc-8 and binutils-2.30

  x86 already uses gcc-8 as the minimum version, this changes all other
  architectures to the same version. gcc-8 is used is Debian 10 and Red
  Hat Enterprise Linux 8, both of which are still supported, and
  binutils 2.30 is the oldest corresponding version on those.

  Ubuntu Pro 18.04 and SUSE Linux Enterprise Server 15 both use gcc-7 as
  the system compiler but additionally include toolchains that remain
  supported.

  With the new minimum toolchain versions, a number of workarounds for
  older versions can be dropped, in particular on x86_64 and arm64.
  Importantly, the updated compiler version allows removing two of the
  five remaining gcc plugins, as support for sancov and structeak
  features is already included in modern compiler versions.

  I tried collecting the known changes that are possible based on the
  new toolchain version, but expect that more cleanups will be possible.

  Since this touches multiple architectures, I merged the patches
  through the asm-generic tree."

* tag 'gcc-minimum-version-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  Makefile.kcov: apply needed compiler option unconditionally in CFLAGS_KCOV
  Documentation: update binutils-2.30 version reference
  gcc-plugins: remove SANCOV gcc plugin
  Kbuild: remove structleak gcc plugin
  arm64: drop binutils version checks
  raid6: skip avx512 checks
  kbuild: require gcc-8 and binutils-2.30

Documentation/admin-guide/README.rst

@@ -259,7 +259,7 @@ Configuring the kernel
 Compiling the kernel
 --------------------
 
- - Make sure you have at least gcc 5.1 available.
+ - Make sure you have at least gcc 8.1 available.
    For more information, refer to :ref:`Documentation/process/changes.rst <changes>`.
 
  - Do a ``make`` to create a compressed kernel image. It is also possible to do

Documentation/kbuild/makefiles.rst

@@ -625,10 +625,10 @@ gcc-min-version
 
   Example::
 
-    cflags-$(call gcc-min-version, 70100) := -foo
+    cflags-$(call gcc-min-version, 110100) := -foo
 
   In this example, cflags-y will be assigned the value -foo if $(CC) is gcc and
-  $(CONFIG_GCC_VERSION) is >= 7.1.
+  $(CONFIG_GCC_VERSION) is >= 11.1.
 
 clang-min-version
   clang-min-version tests if the value of $(CONFIG_CLANG_VERSION) is greater

Documentation/process/changes.rst

@@ -29,13 +29,13 @@ you probably needn't concern yourself with pcmciautils.
 ====================== ===============  ========================================
         Program        Minimal version       Command to check the version
 ====================== ===============  ========================================
-GNU C                  5.1              gcc --version
+GNU C                  8.1              gcc --version
 Clang/LLVM (optional)  13.0.1           clang --version
 Rust (optional)        1.78.0           rustc --version
 bindgen (optional)     0.65.1           bindgen --version
 GNU make               4.0              make --version
 bash                   4.2              bash --version
-binutils               2.25             ld -v
+binutils               2.30             ld -v
 flex                   2.5.35           flex --version
 bison                  2.0              bison --version
 pahole                 1.16             pahole --version
@@ -116,7 +116,7 @@ Bash 4.2 or newer is needed.
 Binutils
 --------
 
-Binutils 2.25 or newer is needed to build the kernel.
+Binutils 2.30 or newer is needed to build the kernel.
 
 pkg-config
 ----------

Documentation/translations/it_IT/process/changes.rst

@@ -32,13 +32,13 @@ PC Card, per esempio, probabilmente non dovreste preoccuparvi di pcmciautils.
 ====================== =================  ========================================
         Programma       Versione minima       Comando per verificare la versione
 ====================== =================  ========================================
-GNU C                  5.1                gcc --version
+GNU C                  8.1                gcc --version
 Clang/LLVM (optional)  13.0.0             clang --version
 Rust (opzionale)       1.78.0             rustc --version
 bindgen (opzionale)    0.65.1             bindgen --version
 GNU make               4.0                make --version
 bash                   4.2                bash --version
-binutils               2.25               ld -v
+binutils               2.30               ld -v
 flex                   2.5.35             flex --version
 bison                  2.0                bison --version
 pahole                 1.16               pahole --version
@@ -118,7 +118,7 @@ Questo richiede bash 4.2 o successivo.
 Binutils
 --------
 
-Per generare il kernel è necessario avere Binutils 2.25 o superiore.
+Per generare il kernel è necessario avere Binutils 2.30 o superiore.
 
 pkg-config
 ----------

Documentation/translations/zh_CN/admin-guide/README.rst

@@ -224,7 +224,7 @@ Linux内核6.x版本 <http://kernel.org/>
 编译内核
 ---------
 
- - 确保您至少有gcc 5.1可用。
+ - 确保您至少有gcc 8.1可用。
    有关更多信息，请参阅 :ref:`Documentation/process/changes.rst <changes>` 。
 
  - 执行 ``make`` 来创建压缩内核映像。如果您安装了lilo以适配内核makefile，

arch/arm64/Kconfig

@@ -659,9 +659,6 @@ config ARM64_ERRATUM_843419
 
 	  If unsure, say Y.
 
-config ARM64_LD_HAS_FIX_ERRATUM_843419
-	def_bool $(ld-option,--fix-cortex-a53-843419)
-
 config ARM64_ERRATUM_1024718
 	bool "Cortex-A55: 1024718: Update of DBM/AP bits without break before make might result in incorrect update"
 	default y
@@ -1907,13 +1904,9 @@ config ARM64_PAN
 	  The feature is detected at runtime, and will remain as a 'nop'
 	  instruction if the cpu does not implement the feature.
 
-config AS_HAS_LSE_ATOMICS
-	def_bool $(as-instr,.arch_extension lse)
-
 config ARM64_LSE_ATOMICS
 	bool
 	default ARM64_USE_LSE_ATOMICS
-	depends on AS_HAS_LSE_ATOMICS
 
 config ARM64_USE_LSE_ATOMICS
 	bool "Atomic instructions"
@@ -1925,20 +1918,12 @@ config ARM64_USE_LSE_ATOMICS
 
 	  Say Y here to make use of these instructions for the in-kernel
 	  atomic routines. This incurs a small overhead on CPUs that do
-	  not support these instructions and requires the kernel to be
-	  built with binutils >= 2.25 in order for the new instructions
-	  to be used.
+	  not support these instructions.
 
 endmenu # "ARMv8.1 architectural features"
 
 menu "ARMv8.2 architectural features"
 
-config AS_HAS_ARMV8_2
-	def_bool $(cc-option,-Wa$(comma)-march=armv8.2-a)
-
-config AS_HAS_SHA3
-	def_bool $(as-instr,.arch armv8.2-a+sha3)
-
 config ARM64_PMEM
 	bool "Enable support for persistent memory"
 	select ARCH_HAS_PMEM_API
@@ -2012,7 +1997,6 @@ config ARM64_PTR_AUTH_KERNEL
 	bool "Use pointer authentication for kernel"
 	default y
 	depends on ARM64_PTR_AUTH
-	depends on (CC_HAS_SIGN_RETURN_ADDRESS || CC_HAS_BRANCH_PROT_PAC_RET) && AS_HAS_ARMV8_3
 	# Modern compilers insert a .note.gnu.property section note for PAC
 	# which is only understood by binutils starting with version 2.33.1.
 	depends on LD_IS_LLD || LD_VERSION >= 23301 || (CC_IS_GCC && GCC_VERSION < 90100)
@@ -2033,19 +2017,10 @@ config CC_HAS_BRANCH_PROT_PAC_RET
 	# GCC 9 or later, clang 8 or later
 	def_bool $(cc-option,-mbranch-protection=pac-ret+leaf)
 
-config CC_HAS_SIGN_RETURN_ADDRESS
-	# GCC 7, 8
-	def_bool $(cc-option,-msign-return-address=all)
-
-config AS_HAS_ARMV8_3
-	def_bool $(cc-option,-Wa$(comma)-march=armv8.3-a)
-
 config AS_HAS_CFI_NEGATE_RA_STATE
+	# binutils 2.34+
 	def_bool $(as-instr,.cfi_startproc\n.cfi_negate_ra_state\n.cfi_endproc\n)
 
-config AS_HAS_LDAPR
-	def_bool $(as-instr,.arch_extension rcpc)
-
 endmenu # "ARMv8.3 architectural features"
 
 menu "ARMv8.4 architectural features"
@@ -2073,20 +2048,13 @@ config ARM64_AMU_EXTN
 	  correctly reflect reality. Most commonly, the value read will be 0,
 	  indicating that the counter is not enabled.
 
-config AS_HAS_ARMV8_4
-	def_bool $(cc-option,-Wa$(comma)-march=armv8.4-a)
-
 config ARM64_TLB_RANGE
 	bool "Enable support for tlbi range feature"
 	default y
-	depends on AS_HAS_ARMV8_4
 	help
 	  ARMv8.4-TLBI provides TLBI invalidation instruction that apply to a
 	  range of input addresses.
 
-	  The feature introduces new assembly instructions, and they were
-	  support when binutils >= 2.30.
-
 endmenu # "ARMv8.4 architectural features"
 
 menu "ARMv8.5 architectural features"
@@ -2162,7 +2130,6 @@ config ARM64_MTE
 	default y
 	depends on ARM64_AS_HAS_MTE && ARM64_TAGGED_ADDR_ABI
 	depends on AS_HAS_ARMV8_5
-	depends on AS_HAS_LSE_ATOMICS
 	# Required for tag checking in the uaccess routines
 	select ARM64_PAN
 	select ARCH_HAS_SUBPAGE_FAULTS

arch/arm64/Makefile

@@ -16,14 +16,11 @@ ifeq ($(CONFIG_RELOCATABLE), y)
 # Pass --no-apply-dynamic-relocs to restore pre-binutils-2.27 behaviour
 # for relative relocs, since this leads to better Image compression
 # with the relocation offsets always being zero.
-LDFLAGS_vmlinux		+= -shared -Bsymbolic -z notext \
-			$(call ld-option, --no-apply-dynamic-relocs)
+LDFLAGS_vmlinux	+= -shared -Bsymbolic -z notext --no-apply-dynamic-relocs
 endif
 
 ifeq ($(CONFIG_ARM64_ERRATUM_843419),y)
-  ifeq ($(CONFIG_ARM64_LD_HAS_FIX_ERRATUM_843419),y)
 LDFLAGS_vmlinux	+= --fix-cortex-a53-843419
-  endif
 endif
 
 cc_has_k_constraint := $(call try-run,echo				\
@@ -105,12 +102,8 @@ endif
 # hardware.
 ifeq ($(CONFIG_AS_HAS_ARMV8_5), y)
   asm-arch := armv8.5-a
-else ifeq ($(CONFIG_AS_HAS_ARMV8_4), y)
+else
   asm-arch := armv8.4-a
-else ifeq ($(CONFIG_AS_HAS_ARMV8_3), y)
-  asm-arch := armv8.3-a
-else ifeq ($(CONFIG_AS_HAS_ARMV8_2), y)
-  asm-arch := armv8.2-a
 endif
 
 ifdef asm-arch
@@ -201,16 +194,6 @@ install zinstall:
 
 archprepare:
 	$(Q)$(MAKE) $(build)=arch/arm64/tools kapi
-ifeq ($(CONFIG_ARM64_ERRATUM_843419),y)
-  ifneq ($(CONFIG_ARM64_LD_HAS_FIX_ERRATUM_843419),y)
-	@echo "warning: ld does not support --fix-cortex-a53-843419; kernel may be susceptible to erratum" >&2
-  endif
-endif
-ifeq ($(CONFIG_ARM64_USE_LSE_ATOMICS),y)
-  ifneq ($(CONFIG_ARM64_LSE_ATOMICS),y)
-	@echo "warning: LSE atomics not supported by binutils" >&2
-  endif
-endif
 
 ifeq ($(KBUILD_EXTMOD),)
 # We need to generate vdso-offsets.h before compiling certain files in kernel/.

arch/arm64/include/asm/rwonce.h

@@ -12,16 +12,12 @@
 
 #ifndef BUILD_VDSO
 
-#ifdef CONFIG_AS_HAS_LDAPR
 #define __LOAD_RCPC(sfx, regs...)					\
 	ALTERNATIVE(							\
 		"ldar"	#sfx "\t" #regs,				\
 		".arch_extension rcpc\n"				\
 		"ldapr"	#sfx "\t" #regs,				\
 	ARM64_HAS_LDAPR)
-#else
-#define __LOAD_RCPC(sfx, regs...)	"ldar" #sfx "\t" #regs
-#endif /* CONFIG_AS_HAS_LDAPR */
 
 /*
  * When building with LTO, there is an increased risk of the compiler

arch/arm64/kvm/Kconfig

@@ -19,7 +19,6 @@ if VIRTUALIZATION
 
 menuconfig KVM
 	bool "Kernel-based Virtual Machine (KVM) support"
-	depends on AS_HAS_ARMV8_4
 	select KVM_COMMON
 	select KVM_GENERIC_HARDWARE_ENABLING
 	select KVM_GENERIC_MMU_NOTIFIER

arch/arm64/lib/xor-neon.c

@@ -319,7 +319,7 @@ static void xor_arm64_eor3_5(unsigned long bytes,
 
 static int __init xor_neon_init(void)
 {
-	if (IS_ENABLED(CONFIG_AS_HAS_SHA3) && cpu_have_named_feature(SHA3)) {
+	if (cpu_have_named_feature(SHA3)) {
 		xor_block_inner_neon.do_3 = xor_arm64_eor3_3;
 		xor_block_inner_neon.do_4 = xor_arm64_eor3_4;
 		xor_block_inner_neon.do_5 = xor_arm64_eor3_5;

arch/um/Makefile

@@ -118,9 +118,7 @@ archprepare:
 	$(Q)$(MAKE) $(build)=$(HOST_DIR)/um include/generated/user_constants.h
 
 LINK-$(CONFIG_LD_SCRIPT_STATIC) += -static
-ifdef CONFIG_LD_SCRIPT_DYN
-LINK-$(call gcc-min-version, 60100)$(CONFIG_CC_IS_CLANG) += -no-pie
-endif
+LINK-$(CONFIG_LD_SCRIPT_DYN) += -no-pie
 LINK-$(CONFIG_LD_SCRIPT_DYN_RPATH) += -Wl,-rpath,/lib
 
 CFLAGS_NO_HARDENING := $(call cc-option, -fno-PIC,) $(call cc-option, -fno-pic,) \

drivers/gpu/drm/panel/panel-tpo-td028ttec1.c

@@ -86,11 +86,7 @@ struct td028ttec1_panel {
 
 #define to_td028ttec1_device(p) container_of(p, struct td028ttec1_panel, panel)
 
-/*
- * noinline_for_stack so we don't get multiple copies of tx_buf
- * on the stack in case of gcc-plugin-structleak
- */
-static int noinline_for_stack
+static int
 jbt_ret_write_0(struct td028ttec1_panel *lcd, u8 reg, int *err)
 {
 	struct spi_device *spi = lcd->spi;

include/linux/unroll.h

@@ -11,10 +11,8 @@
 
 #ifdef CONFIG_CC_IS_CLANG
 #define __pick_unrolled(x, y)		_Pragma(#x)
-#elif CONFIG_GCC_VERSION >= 80000
-#define __pick_unrolled(x, y)		_Pragma(#y)
 #else
-#define __pick_unrolled(x, y)		/* not supported */
+#define __pick_unrolled(x, y)		_Pragma(#y)
 #endif
 
 /**

kernel/gcov/gcc_4_7.c

@@ -22,10 +22,6 @@
 #define GCOV_COUNTERS			9
 #elif (__GNUC__ >= 10)
 #define GCOV_COUNTERS			8
-#elif (__GNUC__ >= 7)
-#define GCOV_COUNTERS			9
-#elif (__GNUC__ > 5) || (__GNUC__ == 5 && __GNUC_MINOR__ >= 1)
-#define GCOV_COUNTERS			10
 #else
 #define GCOV_COUNTERS			9
 #endif

lib/Kconfig.debug

@@ -2153,18 +2153,12 @@ config ARCH_HAS_KCOV
 	  build and run with CONFIG_KCOV. This typically requires
 	  disabling instrumentation for some early boot code.
 
-config CC_HAS_SANCOV_TRACE_PC
-	def_bool $(cc-option,-fsanitize-coverage=trace-pc)
-
-
 config KCOV
 	bool "Code coverage for fuzzing"
 	depends on ARCH_HAS_KCOV
-	depends on CC_HAS_SANCOV_TRACE_PC || GCC_PLUGINS
 	depends on !ARCH_WANTS_NO_INSTR || HAVE_NOINSTR_HACK || \
 		   GCC_VERSION >= 120000 || CC_IS_CLANG
 	select DEBUG_FS
-	select GCC_PLUGIN_SANCOV if !CC_HAS_SANCOV_TRACE_PC
 	select OBJTOOL if HAVE_NOINSTR_HACK
 	help
 	  KCOV exposes kernel code coverage information in a form suitable
@@ -2878,9 +2872,7 @@ config STACKINIT_KUNIT_TEST
 	help
 	  Test if the kernel is zero-initializing stack variables and
 	  padding. Coverage is controlled by compiler flags,
-	  CONFIG_INIT_STACK_ALL_PATTERN, CONFIG_INIT_STACK_ALL_ZERO,
-	  CONFIG_GCC_PLUGIN_STRUCTLEAK, CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF,
-	  or CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF_ALL.
+	  CONFIG_INIT_STACK_ALL_PATTERN or CONFIG_INIT_STACK_ALL_ZERO.
 
 config FORTIFY_KUNIT_TEST
 	tristate "Test fortified str*() and mem*() function internals at runtime" if !KUNIT_ALL_TESTS

lib/raid6/algos.c

@@ -28,10 +28,8 @@ EXPORT_SYMBOL_GPL(raid6_call);
 
 const struct raid6_calls * const raid6_algos[] = {
 #if defined(__i386__) && !defined(__arch_um__)
-#ifdef CONFIG_AS_AVX512
 	&raid6_avx512x2,
 	&raid6_avx512x1,
-#endif
 	&raid6_avx2x2,
 	&raid6_avx2x1,
 	&raid6_sse2x2,
@@ -42,11 +40,9 @@ const struct raid6_calls * const raid6_algos[] = {
 	&raid6_mmxx1,
 #endif
 #if defined(__x86_64__) && !defined(__arch_um__)
-#ifdef CONFIG_AS_AVX512
 	&raid6_avx512x4,
 	&raid6_avx512x2,
 	&raid6_avx512x1,
-#endif
 	&raid6_avx2x4,
 	&raid6_avx2x2,
 	&raid6_avx2x1,
@@ -96,9 +92,7 @@ EXPORT_SYMBOL_GPL(raid6_datap_recov);
 
 const struct raid6_recov_calls *const raid6_recov_algos[] = {
 #ifdef CONFIG_X86
-#ifdef CONFIG_AS_AVX512
 	&raid6_recov_avx512,
-#endif
 	&raid6_recov_avx2,
 	&raid6_recov_ssse3,
 #endif

lib/raid6/avx512.c

@@ -17,8 +17,6 @@
  *
  */
 
-#ifdef CONFIG_AS_AVX512
-
 #include <linux/raid/pq.h>
 #include "x86.h"
 
@@ -560,5 +558,3 @@ const struct raid6_calls raid6_avx512x4 = {
 	.priority = 2		/* Prefer AVX512 over priority 1 (SSE2 and others) */
 };
 #endif
-
-#endif /* CONFIG_AS_AVX512 */

lib/raid6/recov_avx512.c

@@ -6,8 +6,6 @@
  * Author: Megha Dey <megha.dey@linux.intel.com>
  */
 
-#ifdef CONFIG_AS_AVX512
-
 #include <linux/raid/pq.h>
 #include "x86.h"
 
@@ -377,7 +375,3 @@ const struct raid6_recov_calls raid6_recov_avx512 = {
 #endif
 	.priority = 3,
 };
-
-#else
-#warning "your version of binutils lacks AVX512 support"
-#endif

lib/raid6/test/Makefile

@@ -54,9 +54,6 @@ endif
 ifeq ($(IS_X86),yes)
         OBJS   += mmx.o sse1.o sse2.o avx2.o recov_ssse3.o recov_avx2.o avx512.o recov_avx512.o
         CFLAGS += -DCONFIG_X86
-        CFLAGS += $(shell echo "vpmovm2b %k1, %zmm5" |          \
-                    gcc -c -x assembler - >/dev/null 2>&1 &&    \
-                    rm ./-.o && echo -DCONFIG_AS_AVX512=1)
 else ifeq ($(HAS_NEON),yes)
         OBJS   += neon.o neon1.o neon2.o neon4.o neon8.o recov_neon.o recov_neon_inner.o
         CFLAGS += -DCONFIG_KERNEL_MODE_NEON=1

lib/test_fortify/Makefile

@@ -18,10 +18,7 @@ quiet_cmd_gen_fortify_log = CAT     $@
 $(obj)/test_fortify.log: $(addprefix $(obj)/, $(logs)) FORCE
 	$(call if_changed,gen_fortify_log)
 
-# GCC<=7 does not always produce *.d files.
-# Run the tests only for GCC>=8 or Clang.
-always-$(call gcc-min-version, 80000) += test_fortify.log
-always-$(CONFIG_CC_IS_CLANG)          += test_fortify.log
+always-y += test_fortify.log
 
 # Some architectures define __NO_FORTIFY if __SANITIZE_ADDRESS__ is undefined.
 # Pass CFLAGS_KASAN to avoid warnings.