linuxmsm/laptops-kernel
0
0 Fork 0
mirror of https://github.com/linux-msm/laptops-kernel.git synced 2026-08-13 14:19:53 -07:00
Code Issues Packages Projects Releases Wiki Activity

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Browse Source 
Pull networking fixes from David Miller:
 "Several small bug fixes all over:

   1) be2net driver uses wrong payload length when submitting MAC list
      get requests to the chip.  From Sathya Perla.

   2) Fix mwifiex memory leak on driver unload, from Amitkumar Karwar.

   3) Prevent random memory access in batman-adv, from Marek Lindner.

   4) batman-adv doesn't check for pskb_trim_rcsum() errors, also from
      Marek Lindner.

   5) Fix fec crashes on rapid link up/down, from Frank Li.

   6) Fix inner protocol grovelling in GSO, from Pravin B Shelar.

   7) Link event validation fix in qlcnic from Rajesh Borundia.

   8) Not all FEC chips can support checksum offload, fix from Shawn
      Guo.

   9) EXPORT_SYMBOL + inline doesn't make any sense, from Denis Efremov.

  10) Fix race in passthru mode during device removal in macvlan, from
      Jiri Pirko.

  11) Fix RCU hash table lookup socket state race in ipv6, leading to
      NULL pointer derefs, from Eric Dumazet.

  12) Add several missing HAS_DMA kconfig dependencies, from Geert
      Uyttterhoeven.

  13) Fix bogus PCI resource management in 3c59x driver, from Sergei
      Shtylyov.

  14) Fix info leak in ipv6 GRE tunnel driver, from Amerigo Wang.

  15) Fix device leak in ipv6 IPSEC policy layer, from Cong Wang.

  16) DMA mapping leak fix in qlge from Thadeu Lima de Souza Cascardo.

  17) Missing iounmap on probe failure in bna driver, from Wei Yongjun."

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (40 commits)
  bna: add missing iounmap() on error in bnad_init()
  qlge: fix dma map leak when the last chunk is not allocated
  xfrm6: release dev before returning error
  ipv6,gre: do not leak info to user-space
  virtio_net: use default napi weight by default
  emac: Fix EMAC soft reset on 460EX/GT
  3c59x: fix PCI resource management
  caif: CAIF_VIRTIO should depend on HAS_DMA
  net/ethernet: MACB should depend on HAS_DMA
  net/ethernet: ARM_AT91_ETHER should depend on HAS_DMA
  net/wireless: ATH9K should depend on HAS_DMA
  net/ethernet: STMMAC_ETH should depend on HAS_DMA
  net/ethernet: NET_CALXEDA_XGMAC should depend on HAS_DMA
  ipv6: do not clear pinet6 field
  macvlan: fix passthru mode race between dev removal and rx path
  ipv4: ip_output: remove inline marking of EXPORT_SYMBOL functions
  net/mlx4: Strengthen VLAN tags/priorities enforcement in VST mode
  net/mlx4_core: Add missing report on VST and spoof-checking dev caps
  net: fec: enable hardware checksum only on imx6q-fec
  qlcnic: Fix validation of link event command.
  ...
This commit is contained in:
Linus Torvalds committed 2013-05-13 13:25:36 -07:00
2 parents 1f638766ff ba21fc696d
commit dbbffe6898
48 files changed
+499 -264
Download Patch File Download Diff File Expand all files Collapse all files

No files matched your search

drivers/net/caif/Kconfig
+1 -1
View File
@@ -43,7 +43,7 @@ config CAIF_HSI
config CAIF_VIRTIO
tristate "CAIF virtio transport driver"
depends on CAIF
depends on CAIF && HAS_DMA
select VHOST_RING
select VIRTIO
select GENERIC_ALLOCATOR
drivers/net/ethernet/3com/3c59x.c
+13 -12
View File
@@ -632,7 +632,6 @@ struct vortex_private {
pm_state_valid:1, /* pci_dev->saved_config_space has sane contents */
open:1,
medialock:1,
must_free_region:1, /* Flag: if zero, Cardbus owns the I/O region */
large_frames:1, /* accept large frames */
handling_irq:1; /* private in_irq indicator */
/* {get|set}_wol operations are already serialized by rtnl.
@@ -1012,6 +1011,12 @@ static int vortex_init_one(struct pci_dev *pdev,
if (rc < 0)
goto out;
rc = pci_request_regions(pdev, DRV_NAME);
if (rc < 0) {
pci_disable_device(pdev);
goto out;
}
unit = vortex_cards_found;
if (global_use_mmio < 0 && (unit >= MAX_UNITS || use_mmio[unit] < 0)) {
@@ -1027,6 +1032,7 @@ static int vortex_init_one(struct pci_dev *pdev,
if (!ioaddr) /* If mapping fails, fall-back to BAR 0... */
ioaddr = pci_iomap(pdev, 0, 0);
if (!ioaddr) {
pci_release_regions(pdev);
pci_disable_device(pdev);
rc = -ENOMEM;
goto out;
@@ -1036,6 +1042,7 @@ static int vortex_init_one(struct pci_dev *pdev,
ent->driver_data, unit);
if (rc < 0) {
pci_iounmap(pdev, ioaddr);
pci_release_regions(pdev);
pci_disable_device(pdev);
goto out;
}
@@ -1178,11 +1185,6 @@ static int vortex_probe1(struct device *gendev, void __iomem *ioaddr, int irq,
/* PCI-only startup logic */
if (pdev) {
/* EISA resources already marked, so only PCI needs to do this here */
/* Ignore return value, because Cardbus drivers already allocate for us */
if (request_region(dev->base_addr, vci->io_size, print_name) != NULL)
vp->must_free_region = 1;
/* enable bus-mastering if necessary */
if (vci->flags & PCI_USES_MASTER)
pci_set_master(pdev);
@@ -1220,7 +1222,7 @@ static int vortex_probe1(struct device *gendev, void __iomem *ioaddr, int irq,
&vp->rx_ring_dma);
retval = -ENOMEM;
if (!vp->rx_ring)
goto free_region;
goto free_device;
vp->tx_ring = (struct boom_tx_desc *)(vp->rx_ring + RX_RING_SIZE);
vp->tx_ring_dma = vp->rx_ring_dma + sizeof(struct boom_rx_desc) * RX_RING_SIZE;
@@ -1484,9 +1486,7 @@ free_ring:
+ sizeof(struct boom_tx_desc) * TX_RING_SIZE,
vp->rx_ring,
vp->rx_ring_dma);
free_region:
if (vp->must_free_region)
release_region(dev->base_addr, vci->io_size);
free_device:
free_netdev(dev);
pr_err(PFX "vortex_probe1 fails. Returns %d\n", retval);
out:
@@ -3254,8 +3254,9 @@ static void vortex_remove_one(struct pci_dev *pdev)
+ sizeof(struct boom_tx_desc) * TX_RING_SIZE,
vp->rx_ring,
vp->rx_ring_dma);
if (vp->must_free_region)
release_region(dev->base_addr, vp->io_size);
pci_release_regions(pdev);
free_netdev(dev);
}
drivers/net/ethernet/brocade/bna/bnad.c
+3 -2
View File
@@ -3236,9 +3236,10 @@ bnad_init(struct bnad *bnad,
sprintf(bnad->wq_name, "%s_wq_%d", BNAD_NAME, bnad->id);
bnad->work_q = create_singlethread_workqueue(bnad->wq_name);
if (!bnad->work_q)
if (!bnad->work_q) {
iounmap(bnad->bar0);
return -ENOMEM;
}
return 0;
}
drivers/net/ethernet/cadence/Kconfig
+2 -1
View File
@@ -22,7 +22,7 @@ if NET_CADENCE
config ARM_AT91_ETHER
tristate "AT91RM9200 Ethernet support"
depends on GENERIC_HARDIRQS
depends on GENERIC_HARDIRQS && HAS_DMA
select NET_CORE
select MACB
---help---
@@ -31,6 +31,7 @@ config ARM_AT91_ETHER
config MACB
tristate "Cadence MACB/GEM support"
depends on HAS_DMA
select PHYLIB
---help---
The Cadence MACB ethernet interface is found on many Atmel AT32 and
drivers/net/ethernet/calxeda/Kconfig
+1 -1
View File
@@ -1,6 +1,6 @@
config NET_CALXEDA_XGMAC
tristate "Calxeda 1G/10G XGMAC Ethernet driver"
depends on HAS_IOMEM
depends on HAS_IOMEM && HAS_DMA
select CRC32
help
This is the driver for the XGMAC Ethernet IP block found on Calxeda
drivers/net/ethernet/freescale/fec_main.c
+13 -7
View File
@@ -87,6 +87,8 @@
#define FEC_QUIRK_HAS_GBIT (1 << 3)
/* Controller has extend desc buffer */
#define FEC_QUIRK_HAS_BUFDESC_EX (1 << 4)
/* Controller has hardware checksum support */
#define FEC_QUIRK_HAS_CSUM (1 << 5)
static struct platform_device_id fec_devtype[] = {
{
@@ -105,7 +107,7 @@ static struct platform_device_id fec_devtype[] = {
}, {
.name = "imx6q-fec",
.driver_data = FEC_QUIRK_ENET_MAC | FEC_QUIRK_HAS_GBIT |
FEC_QUIRK_HAS_BUFDESC_EX,
FEC_QUIRK_HAS_BUFDESC_EX | FEC_QUIRK_HAS_CSUM,
}, {
.name = "mvf-fec",
.driver_data = FEC_QUIRK_ENET_MAC,
@@ -1744,6 +1746,8 @@ static const struct net_device_ops fec_netdev_ops = {
static int fec_enet_init(struct net_device *ndev)
{
struct fec_enet_private *fep = netdev_priv(ndev);
const struct platform_device_id *id_entry =
platform_get_device_id(fep->pdev);
struct bufdesc *cbd_base;
/* Allocate memory for buffer descriptors. */
@@ -1775,12 +1779,14 @@ static int fec_enet_init(struct net_device *ndev)
writel(FEC_RX_DISABLED_IMASK, fep->hwp + FEC_IMASK);
netif_napi_add(ndev, &fep->napi, fec_enet_rx_napi, FEC_NAPI_WEIGHT);
/* enable hw accelerator */
ndev->features |= (NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM
| NETIF_F_RXCSUM);
ndev->hw_features |= (NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM
| NETIF_F_RXCSUM);
fep->csum_flags |= FLAG_RX_CSUM_ENABLED;
if (id_entry->driver_data & FEC_QUIRK_HAS_CSUM) {
/* enable hw accelerator */
ndev->features |= (NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM
| NETIF_F_RXCSUM);
ndev->hw_features |= (NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM
| NETIF_F_RXCSUM);
fep->csum_flags |= FLAG_RX_CSUM_ENABLED;
}
fec_restart(ndev, 0);
drivers/net/ethernet/ibm/emac/core.c
+28 -8
View File
@@ -359,10 +359,26 @@ static int emac_reset(struct emac_instance *dev)
}
#ifdef CONFIG_PPC_DCR_NATIVE
/* Enable internal clock source */
if (emac_has_feature(dev, EMAC_FTR_460EX_PHY_CLK_FIX))
dcri_clrset(SDR0, SDR0_ETH_CFG,
0, SDR0_ETH_CFG_ECS << dev->cell_index);
/*
* PPC460EX/GT Embedded Processor Advanced User's Manual
* section 28.10.1 Mode Register 0 (EMACx_MR0) states:
* Note: The PHY must provide a TX Clk in order to perform a soft reset
* of the EMAC. If none is present, select the internal clock
* (SDR0_ETH_CFG[EMACx_PHY_CLK] = 1).
* After a soft reset, select the external clock.
*/
if (emac_has_feature(dev, EMAC_FTR_460EX_PHY_CLK_FIX)) {
if (dev->phy_address == 0xffffffff &&
dev->phy_map == 0xffffffff) {
/* No PHY: select internal loop clock before reset */
dcri_clrset(SDR0, SDR0_ETH_CFG,
0, SDR0_ETH_CFG_ECS << dev->cell_index);
} else {
/* PHY present: select external clock before reset */
dcri_clrset(SDR0, SDR0_ETH_CFG,
SDR0_ETH_CFG_ECS << dev->cell_index, 0);
}
}
#endif
out_be32(&p->mr0, EMAC_MR0_SRST);
@@ -370,10 +386,14 @@ static int emac_reset(struct emac_instance *dev)
--n;
#ifdef CONFIG_PPC_DCR_NATIVE
/* Enable external clock source */
if (emac_has_feature(dev, EMAC_FTR_460EX_PHY_CLK_FIX))
dcri_clrset(SDR0, SDR0_ETH_CFG,
SDR0_ETH_CFG_ECS << dev->cell_index, 0);
if (emac_has_feature(dev, EMAC_FTR_460EX_PHY_CLK_FIX)) {
if (dev->phy_address == 0xffffffff &&
dev->phy_map == 0xffffffff) {
/* No PHY: restore external clock source after reset */
dcri_clrset(SDR0, SDR0_ETH_CFG,
SDR0_ETH_CFG_ECS << dev->cell_index, 0);
}
}
#endif
if (n) {
drivers/net/ethernet/mellanox/mlx4/en_resources.c
+1 -1
View File
@@ -60,7 +60,7 @@ void mlx4_en_fill_qp_context(struct mlx4_en_priv *priv, int size, int stride,
context->pri_path.sched_queue = 0x83 | (priv->port - 1) << 6;
if (user_prio >= 0) {
context->pri_path.sched_queue |= user_prio << 3;
context->pri_path.feup = 1 << 6;
context->pri_path.feup = MLX4_FEUP_FORCE_ETH_UP;
}
context->pri_path.counter_index = 0xff;
context->cqn_send = cpu_to_be32(cqn);
drivers/net/ethernet/mellanox/mlx4/fw.c
+3 -1
View File
@@ -131,7 +131,9 @@ static void dump_dev_cap_flags2(struct mlx4_dev *dev, u64 flags)
[2] = "RSS XOR Hash Function support",
[3] = "Device manage flow steering support",
[4] = "Automatic MAC reassignment support",
[5] = "Time stamping support"
[5] = "Time stamping support",
[6] = "VST (control vlan insertion/stripping) support",
[7] = "FSM (MAC anti-spoofing) support"
};
int i;
drivers/net/ethernet/mellanox/mlx4/resource_tracker.c
+17 -12
View File
@@ -372,24 +372,29 @@ static int update_vport_qp_param(struct mlx4_dev *dev,
if (MLX4_QP_ST_RC == qp_type)
return -EINVAL;
/* force strip vlan by clear vsd */
qpc->param3 &= ~cpu_to_be32(MLX4_STRIP_VLAN);
if (0 != vp_oper->state.default_vlan) {
qpc->pri_path.vlan_control =
MLX4_VLAN_CTRL_ETH_TX_BLOCK_TAGGED |
MLX4_VLAN_CTRL_ETH_RX_BLOCK_PRIO_TAGGED |
MLX4_VLAN_CTRL_ETH_RX_BLOCK_UNTAGGED;
} else { /* priority tagged */
qpc->pri_path.vlan_control =
MLX4_VLAN_CTRL_ETH_TX_BLOCK_TAGGED |
MLX4_VLAN_CTRL_ETH_RX_BLOCK_TAGGED;
}
qpc->pri_path.fvl_rx |= MLX4_FVL_RX_FORCE_ETH_VLAN;
qpc->pri_path.vlan_index = vp_oper->vlan_idx;
qpc->pri_path.fl = (1 << 6) | (1 << 2); /* set cv bit and hide_cqe_vlan bit*/
qpc->pri_path.feup |= 1 << 3; /* set fvl bit */
qpc->pri_path.fl |= MLX4_FL_CV | MLX4_FL_ETH_HIDE_CQE_VLAN;
qpc->pri_path.feup |= MLX4_FEUP_FORCE_ETH_UP | MLX4_FVL_FORCE_ETH_VLAN;
qpc->pri_path.sched_queue &= 0xC7;
qpc->pri_path.sched_queue |= (vp_oper->state.default_qos) << 3;
mlx4_dbg(dev, "qp %d port %d Q 0x%x set vlan to %d vidx %d feup %x fl %x\n",
be32_to_cpu(qpc->local_qpn) & 0xffffff, port,
(int)(qpc->pri_path.sched_queue), vp_oper->state.default_vlan,
vp_oper->vlan_idx, (int)(qpc->pri_path.feup),
(int)(qpc->pri_path.fl));
}
if (vp_oper->state.spoofchk) {
qpc->pri_path.feup |= 1 << 5; /* set fsm bit */;
qpc->pri_path.feup |= MLX4_FSM_FORCE_ETH_SRC_MAC;
qpc->pri_path.grh_mylmc = (0x80 & qpc->pri_path.grh_mylmc) + vp_oper->mac_idx;
mlx4_dbg(dev, "spoof qp %d port %d feup 0x%x, myLmc 0x%x mindx %d\n",
be32_to_cpu(qpc->local_qpn) & 0xffffff, port,
(int)qpc->pri_path.feup, (int)qpc->pri_path.grh_mylmc,
vp_oper->mac_idx);
}
return 0;
}
drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
+2
View File
@@ -429,6 +429,7 @@ struct qlcnic_hardware_context {
u16 port_type;
u16 board_type;
u16 supported_type;
u16 link_speed;
u16 link_duplex;
@@ -1514,6 +1515,7 @@ void qlcnic_create_diag_entries(struct qlcnic_adapter *adapter);
void qlcnic_remove_diag_entries(struct qlcnic_adapter *adapter);
void qlcnic_82xx_add_sysfs(struct qlcnic_adapter *adapter);
void qlcnic_82xx_remove_sysfs(struct qlcnic_adapter *adapter);
int qlcnic_82xx_get_settings(struct qlcnic_adapter *, struct ethtool_cmd *);
int qlcnicvf_config_bridged_mode(struct qlcnic_adapter *, u32);
int qlcnicvf_config_led(struct qlcnic_adapter *, u32, u32);
drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c
+83 -12
View File
@@ -696,15 +696,14 @@ u32 qlcnic_83xx_mac_rcode(struct qlcnic_adapter *adapter)
return 1;
}
u32 qlcnic_83xx_mbx_poll(struct qlcnic_adapter *adapter)
u32 qlcnic_83xx_mbx_poll(struct qlcnic_adapter *adapter, u32 *wait_time)
{
u32 data;
unsigned long wait_time = 0;
struct qlcnic_hardware_context *ahw = adapter->ahw;
/* wait for mailbox completion */
do {
data = QLCRDX(ahw, QLCNIC_FW_MBX_CTRL);
if (++wait_time > QLCNIC_MBX_TIMEOUT) {
if (++(*wait_time) > QLCNIC_MBX_TIMEOUT) {
data = QLCNIC_RCODE_TIMEOUT;
break;
}
@@ -720,8 +719,8 @@ int qlcnic_83xx_mbx_op(struct qlcnic_adapter *adapter,
u16 opcode;
u8 mbx_err_code;
unsigned long flags;
u32 rsp, mbx_val, fw_data, rsp_num, mbx_cmd;
struct qlcnic_hardware_context *ahw = adapter->ahw;
u32 rsp, mbx_val, fw_data, rsp_num, mbx_cmd, wait_time = 0;
opcode = LSW(cmd->req.arg[0]);
if (!test_bit(QLC_83XX_MBX_READY, &adapter->ahw->idc.status)) {
@@ -754,15 +753,13 @@ int qlcnic_83xx_mbx_op(struct qlcnic_adapter *adapter,
/* Signal FW about the impending command */
QLCWRX(ahw, QLCNIC_HOST_MBX_CTRL, QLCNIC_SET_OWNER);
poll:
rsp = qlcnic_83xx_mbx_poll(adapter);
rsp = qlcnic_83xx_mbx_poll(adapter, &wait_time);
if (rsp != QLCNIC_RCODE_TIMEOUT) {
/* Get the FW response data */
fw_data = readl(QLCNIC_MBX_FW(ahw, 0));
if (fw_data & QLCNIC_MBX_ASYNC_EVENT) {
__qlcnic_83xx_process_aen(adapter);
mbx_val = QLCRDX(ahw, QLCNIC_HOST_MBX_CTRL);
if (mbx_val)
goto poll;
goto poll;
}
mbx_err_code = QLCNIC_MBX_STATUS(fw_data);
rsp_num = QLCNIC_MBX_NUM_REGS(fw_data);
@@ -1276,11 +1273,13 @@ out:
return err;
}
static int qlcnic_83xx_diag_alloc_res(struct net_device *netdev, int test)
static int qlcnic_83xx_diag_alloc_res(struct net_device *netdev, int test,
int num_sds_ring)
{
struct qlcnic_adapter *adapter = netdev_priv(netdev);
struct qlcnic_host_sds_ring *sds_ring;
struct qlcnic_host_rds_ring *rds_ring;
u16 adapter_state = adapter->is_up;
u8 ring;
int ret;
@@ -1304,6 +1303,10 @@ static int qlcnic_83xx_diag_alloc_res(struct net_device *netdev, int test)
ret = qlcnic_fw_create_ctx(adapter);
if (ret) {
qlcnic_detach(adapter);
if (adapter_state == QLCNIC_ADAPTER_UP_MAGIC) {
adapter->max_sds_rings = num_sds_ring;
qlcnic_attach(adapter);
}
netif_device_attach(netdev);
return ret;
}
@@ -1596,7 +1599,8 @@ int qlcnic_83xx_loopback_test(struct net_device *netdev, u8 mode)
if (test_and_set_bit(__QLCNIC_RESETTING, &adapter->state))
return -EBUSY;
ret = qlcnic_83xx_diag_alloc_res(netdev, QLCNIC_LOOPBACK_TEST);
ret = qlcnic_83xx_diag_alloc_res(netdev, QLCNIC_LOOPBACK_TEST,
max_sds_rings);
if (ret)
goto fail_diag_alloc;
@@ -2830,6 +2834,23 @@ int qlcnic_83xx_test_link(struct qlcnic_adapter *adapter)
break;
}
config = cmd.rsp.arg[3];
if (QLC_83XX_SFP_PRESENT(config)) {
switch (ahw->module_type) {
case LINKEVENT_MODULE_OPTICAL_UNKNOWN:
case LINKEVENT_MODULE_OPTICAL_SRLR:
case LINKEVENT_MODULE_OPTICAL_LRM:
case LINKEVENT_MODULE_OPTICAL_SFP_1G:
ahw->supported_type = PORT_FIBRE;
break;
case LINKEVENT_MODULE_TWINAX_UNSUPPORTED_CABLE:
case LINKEVENT_MODULE_TWINAX_UNSUPPORTED_CABLELEN:
case LINKEVENT_MODULE_TWINAX:
ahw->supported_type = PORT_TP;
break;
default:
ahw->supported_type = PORT_OTHER;
}
}
if (config & 1)
err = 1;
}
@@ -2838,7 +2859,8 @@ out:
return config;
}
int qlcnic_83xx_get_settings(struct qlcnic_adapter *adapter)
int qlcnic_83xx_get_settings(struct qlcnic_adapter *adapter,
struct ethtool_cmd *ecmd)
{
u32 config = 0;
int status = 0;
@@ -2851,6 +2873,54 @@ int qlcnic_83xx_get_settings(struct qlcnic_adapter *adapter)
ahw->module_type = QLC_83XX_SFP_MODULE_TYPE(config);
/* hard code until there is a way to get it from flash */
ahw->board_type = QLCNIC_BRDTYPE_83XX_10G;
if (netif_running(adapter->netdev) && ahw->has_link_events) {
ethtool_cmd_speed_set(ecmd, ahw->link_speed);
ecmd->duplex = ahw->link_duplex;
ecmd->autoneg = ahw->link_autoneg;
} else {
ethtool_cmd_speed_set(ecmd, SPEED_UNKNOWN);
ecmd->duplex = DUPLEX_UNKNOWN;
ecmd->autoneg = AUTONEG_DISABLE;
}
if (ahw->port_type == QLCNIC_XGBE) {
ecmd->supported = SUPPORTED_1000baseT_Full;
ecmd->advertising = ADVERTISED_1000baseT_Full;
} else {
ecmd->supported = (SUPPORTED_10baseT_Half |
SUPPORTED_10baseT_Full |
SUPPORTED_100baseT_Half |
SUPPORTED_100baseT_Full |
SUPPORTED_1000baseT_Half |
SUPPORTED_1000baseT_Full);
ecmd->advertising = (ADVERTISED_100baseT_Half |
ADVERTISED_100baseT_Full |
ADVERTISED_1000baseT_Half |
ADVERTISED_1000baseT_Full);
}
switch (ahw->supported_type) {
case PORT_FIBRE:
ecmd->supported |= SUPPORTED_FIBRE;
ecmd->advertising |= ADVERTISED_FIBRE;
ecmd->port = PORT_FIBRE;
ecmd->transceiver = XCVR_EXTERNAL;
break;
case PORT_TP:
ecmd->supported |= SUPPORTED_TP;
ecmd->advertising |= ADVERTISED_TP;
ecmd->port = PORT_TP;
ecmd->transceiver = XCVR_INTERNAL;
break;
default:
ecmd->supported |= SUPPORTED_FIBRE;
ecmd->advertising |= ADVERTISED_FIBRE;
ecmd->port = PORT_OTHER;
ecmd->transceiver = XCVR_EXTERNAL;
break;
}
ecmd->phy_address = ahw->physical_port;
return status;
}
@@ -3046,7 +3116,8 @@ int qlcnic_83xx_interrupt_test(struct net_device *netdev)
if (test_and_set_bit(__QLCNIC_RESETTING, &adapter->state))
return -EIO;
ret = qlcnic_83xx_diag_alloc_res(netdev, QLCNIC_INTERRUPT_TEST);
ret = qlcnic_83xx_diag_alloc_res(netdev, QLCNIC_INTERRUPT_TEST,
max_sds_rings);
if (ret)
goto fail_diag_irq;
drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h
+2 -2
View File
@@ -603,7 +603,7 @@ int qlcnic_83xx_get_vnic_pf_info(struct qlcnic_adapter *, struct qlcnic_info *);
void qlcnic_83xx_get_minidump_template(struct qlcnic_adapter *);
void qlcnic_83xx_get_stats(struct qlcnic_adapter *adapter, u64 *data);
int qlcnic_83xx_get_settings(struct qlcnic_adapter *);
int qlcnic_83xx_get_settings(struct qlcnic_adapter *, struct ethtool_cmd *);
int qlcnic_83xx_set_settings(struct qlcnic_adapter *, struct ethtool_cmd *);
void qlcnic_83xx_get_pauseparam(struct qlcnic_adapter *,
struct ethtool_pauseparam *);
@@ -620,7 +620,7 @@ int qlcnic_83xx_flash_test(struct qlcnic_adapter *);
int qlcnic_83xx_enable_flash_write(struct qlcnic_adapter *);
int qlcnic_83xx_disable_flash_write(struct qlcnic_adapter *);
u32 qlcnic_83xx_mac_rcode(struct qlcnic_adapter *);
u32 qlcnic_83xx_mbx_poll(struct qlcnic_adapter *);
u32 qlcnic_83xx_mbx_poll(struct qlcnic_adapter *, u32 *);
void qlcnic_83xx_enable_mbx_poll(struct qlcnic_adapter *);
void qlcnic_83xx_disable_mbx_poll(struct qlcnic_adapter *);
#endif
drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c
+13 -9
View File
@@ -435,10 +435,6 @@ static void qlcnic_83xx_idc_attach_driver(struct qlcnic_adapter *adapter)
}
done:
netif_device_attach(netdev);
if (netif_running(netdev)) {
netif_carrier_on(netdev);
netif_wake_queue(netdev);
}
}
static int qlcnic_83xx_idc_enter_failed_state(struct qlcnic_adapter *adapter,
@@ -642,15 +638,21 @@ static int qlcnic_83xx_idc_reattach_driver(struct qlcnic_adapter *adapter)
static void qlcnic_83xx_idc_update_idc_params(struct qlcnic_adapter *adapter)
{
struct qlcnic_hardware_context *ahw = adapter->ahw;
qlcnic_83xx_idc_update_drv_presence_reg(adapter, 1, 1);
clear_bit(__QLCNIC_RESETTING, &adapter->state);
set_bit(QLC_83XX_MBX_READY, &adapter->ahw->idc.status);
qlcnic_83xx_idc_update_audit_reg(adapter, 0, 1);
set_bit(QLC_83XX_MODULE_LOADED, &adapter->ahw->idc.status);
adapter->ahw->idc.quiesce_req = 0;
adapter->ahw->idc.delay = QLC_83XX_IDC_FW_POLL_DELAY;
adapter->ahw->idc.err_code = 0;
adapter->ahw->idc.collect_dump = 0;
ahw->idc.quiesce_req = 0;
ahw->idc.delay = QLC_83XX_IDC_FW_POLL_DELAY;
ahw->idc.err_code = 0;
ahw->idc.collect_dump = 0;
ahw->reset_context = 0;
adapter->tx_timeo_cnt = 0;
clear_bit(__QLCNIC_RESETTING, &adapter->state);
}
/**
@@ -851,6 +853,7 @@ static int qlcnic_83xx_idc_ready_state(struct qlcnic_adapter *adapter)
/* Check for soft reset request */
if (ahw->reset_context &&
!(val & QLC_83XX_IDC_DISABLE_FW_RESET_RECOVERY)) {
adapter->ahw->reset_context = 0;
qlcnic_83xx_idc_tx_soft_reset(adapter);
return ret;
}
@@ -914,6 +917,7 @@ static int qlcnic_83xx_idc_need_quiesce_state(struct qlcnic_adapter *adapter)
static int qlcnic_83xx_idc_failed_state(struct qlcnic_adapter *adapter)
{
dev_err(&adapter->pdev->dev, "%s: please restart!!\n", __func__);
clear_bit(__QLCNIC_RESETTING, &adapter->state);
adapter->ahw->idc.err_code = -EIO;
return 0;
drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c
+27 -27
View File
@@ -131,12 +131,13 @@ static const char qlcnic_83xx_rx_stats_strings[][ETH_GSTRING_LEN] = {
"ctx_lro_pkt_cnt",
"ctx_ip_csum_error",
"ctx_rx_pkts_wo_ctx",
"ctx_rx_pkts_dropped_wo_sts",
"ctx_rx_pkts_drop_wo_sds_on_card",
"ctx_rx_pkts_drop_wo_sds_on_host",
"ctx_rx_osized_pkts",
"ctx_rx_pkts_dropped_wo_rds",
"ctx_rx_unexpected_mcast_pkts",
"ctx_invalid_mac_address",
"ctx_rx_rds_ring_prim_attemoted",
"ctx_rx_rds_ring_prim_attempted",
"ctx_rx_rds_ring_prim_success",
"ctx_num_lro_flows_added",
"ctx_num_lro_flows_removed",
@@ -251,6 +252,18 @@ static int
qlcnic_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
{
struct qlcnic_adapter *adapter = netdev_priv(dev);
if (qlcnic_82xx_check(adapter))
return qlcnic_82xx_get_settings(adapter, ecmd);
else if (qlcnic_83xx_check(adapter))
return qlcnic_83xx_get_settings(adapter, ecmd);
return -EIO;
}
int qlcnic_82xx_get_settings(struct qlcnic_adapter *adapter,
struct ethtool_cmd *ecmd)
{
struct qlcnic_hardware_context *ahw = adapter->ahw;
u32 speed, reg;
int check_sfp_module = 0;
@@ -276,10 +289,7 @@ qlcnic_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
} else if (adapter->ahw->port_type == QLCNIC_XGBE) {
u32 val = 0;
if (qlcnic_83xx_check(adapter))
qlcnic_83xx_get_settings(adapter);
else
val = QLCRD32(adapter, QLCNIC_PORT_MODE_ADDR);
val = QLCRD32(adapter, QLCNIC_PORT_MODE_ADDR);
if (val == QLCNIC_PORT_MODE_802_3_AP) {
ecmd->supported = SUPPORTED_1000baseT_Full;
@@ -289,16 +299,13 @@ qlcnic_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
ecmd->advertising = ADVERTISED_10000baseT_Full;
}
if (netif_running(dev) && adapter->ahw->has_link_events) {
if (qlcnic_82xx_check(adapter)) {
reg = QLCRD32(adapter,
P3P_LINK_SPEED_REG(pcifn));
speed = P3P_LINK_SPEED_VAL(pcifn, reg);
ahw->link_speed = speed * P3P_LINK_SPEED_MHZ;
}
ethtool_cmd_speed_set(ecmd, adapter->ahw->link_speed);
ecmd->autoneg = adapter->ahw->link_autoneg;
ecmd->duplex = adapter->ahw->link_duplex;
if (netif_running(adapter->netdev) && ahw->has_link_events) {
reg = QLCRD32(adapter, P3P_LINK_SPEED_REG(pcifn));
speed = P3P_LINK_SPEED_VAL(pcifn, reg);
ahw->link_speed = speed * P3P_LINK_SPEED_MHZ;
ethtool_cmd_speed_set(ecmd, ahw->link_speed);
ecmd->autoneg = ahw->link_autoneg;
ecmd->duplex = ahw->link_duplex;
goto skip;
}
@@ -340,8 +347,8 @@ skip:
case QLCNIC_BRDTYPE_P3P_10G_SFP_QT:
ecmd->advertising |= ADVERTISED_TP;
ecmd->supported |= SUPPORTED_TP;
check_sfp_module = netif_running(dev) &&
adapter->ahw->has_link_events;
check_sfp_module = netif_running(adapter->netdev) &&
ahw->has_link_events;
case QLCNIC_BRDTYPE_P3P_10G_XFP:
ecmd->supported |= SUPPORTED_FIBRE;
ecmd->advertising |= ADVERTISED_FIBRE;
@@ -355,8 +362,8 @@ skip:
ecmd->advertising |=
(ADVERTISED_FIBRE | ADVERTISED_TP);
ecmd->port = PORT_FIBRE;
check_sfp_module = netif_running(dev) &&
adapter->ahw->has_link_events;
check_sfp_module = netif_running(adapter->netdev) &&
ahw->has_link_events;
} else {
ecmd->autoneg = AUTONEG_ENABLE;
ecmd->supported |= (SUPPORTED_TP | SUPPORTED_Autoneg);
@@ -365,13 +372,6 @@ skip:
ecmd->port = PORT_TP;
}
break;
case QLCNIC_BRDTYPE_83XX_10G:
ecmd->autoneg = AUTONEG_DISABLE;
ecmd->supported |= (SUPPORTED_FIBRE | SUPPORTED_TP);
ecmd->advertising |= (ADVERTISED_FIBRE | ADVERTISED_TP);
ecmd->port = PORT_FIBRE;
check_sfp_module = netif_running(dev) && ahw->has_link_events;
break;
default:
dev_err(&adapter->pdev->dev, "Unsupported board model %d\n",
adapter->ahw->board_type);
drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.h
+1 -1
View File
@@ -134,7 +134,7 @@ struct qlcnic_mailbox_metadata {
#define QLCNIC_SET_OWNER 1
#define QLCNIC_CLR_OWNER 0
#define QLCNIC_MBX_TIMEOUT 10000
#define QLCNIC_MBX_TIMEOUT 5000
#define QLCNIC_MBX_RSP_OK 1
#define QLCNIC_MBX_PORT_RSP_OK 0x1a
drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
+36 -10
View File
@@ -37,24 +37,24 @@ MODULE_PARM_DESC(qlcnic_mac_learn,
"Mac Filter (0=learning is disabled, 1=Driver learning is enabled, 2=FDB learning is enabled)");
int qlcnic_use_msi = 1;
MODULE_PARM_DESC(use_msi, "MSI interrupt (0=disabled, 1=enabled");
MODULE_PARM_DESC(use_msi, "MSI interrupt (0=disabled, 1=enabled)");
module_param_named(use_msi, qlcnic_use_msi, int, 0444);
int qlcnic_use_msi_x = 1;
MODULE_PARM_DESC(use_msi_x, "MSI-X interrupt (0=disabled, 1=enabled");
MODULE_PARM_DESC(use_msi_x, "MSI-X interrupt (0=disabled, 1=enabled)");
module_param_named(use_msi_x, qlcnic_use_msi_x, int, 0444);
int qlcnic_auto_fw_reset = 1;
MODULE_PARM_DESC(auto_fw_reset, "Auto firmware reset (0=disabled, 1=enabled");
MODULE_PARM_DESC(auto_fw_reset, "Auto firmware reset (0=disabled, 1=enabled)");
module_param_named(auto_fw_reset, qlcnic_auto_fw_reset, int, 0644);
int qlcnic_load_fw_file;
MODULE_PARM_DESC(load_fw_file, "Load firmware from (0=flash, 1=file");
MODULE_PARM_DESC(load_fw_file, "Load firmware from (0=flash, 1=file)");
module_param_named(load_fw_file, qlcnic_load_fw_file, int, 0444);
int qlcnic_config_npars;
module_param(qlcnic_config_npars, int, 0444);
MODULE_PARM_DESC(qlcnic_config_npars, "Configure NPARs (0=disabled, 1=enabled");
MODULE_PARM_DESC(qlcnic_config_npars, "Configure NPARs (0=disabled, 1=enabled)");
static int qlcnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent);
static void qlcnic_remove(struct pci_dev *pdev);
@@ -308,6 +308,23 @@ int qlcnic_read_mac_addr(struct qlcnic_adapter *adapter)
return 0;
}
static void qlcnic_delete_adapter_mac(struct qlcnic_adapter *adapter)
{
struct qlcnic_mac_list_s *cur;
struct list_head *head;
list_for_each(head, &adapter->mac_list) {
cur = list_entry(head, struct qlcnic_mac_list_s, list);
if (!memcmp(adapter->mac_addr, cur->mac_addr, ETH_ALEN)) {
qlcnic_sre_macaddr_change(adapter, cur->mac_addr,
0, QLCNIC_MAC_DEL);
list_del(&cur->list);
kfree(cur);
return;
}
}
}
static int qlcnic_set_mac(struct net_device *netdev, void *p)
{
struct qlcnic_adapter *adapter = netdev_priv(netdev);
@@ -322,11 +339,15 @@ static int qlcnic_set_mac(struct net_device *netdev, void *p)
if (!is_valid_ether_addr(addr->sa_data))
return -EINVAL;
if (!memcmp(adapter->mac_addr, addr->sa_data, ETH_ALEN))
return 0;
if (test_bit(__QLCNIC_DEV_UP, &adapter->state)) {
netif_device_detach(netdev);
qlcnic_napi_disable(adapter);
}
qlcnic_delete_adapter_mac(adapter);
memcpy(adapter->mac_addr, addr->sa_data, netdev->addr_len);
memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
qlcnic_set_multi(adapter->netdev);
@@ -2481,12 +2502,17 @@ static void qlcnic_tx_timeout(struct net_device *netdev)
if (test_bit(__QLCNIC_RESETTING, &adapter->state))
return;
dev_err(&netdev->dev, "transmit timeout, resetting.\n");
if (++adapter->tx_timeo_cnt >= QLCNIC_MAX_TX_TIMEOUTS)
adapter->need_fw_reset = 1;
else
if (++adapter->tx_timeo_cnt >= QLCNIC_MAX_TX_TIMEOUTS) {
netdev_info(netdev, "Tx timeout, reset the adapter.\n");
if (qlcnic_82xx_check(adapter))
adapter->need_fw_reset = 1;
else if (qlcnic_83xx_check(adapter))
qlcnic_83xx_idc_request_reset(adapter,
QLCNIC_FORCE_FW_DUMP_KEY);
} else {
netdev_info(netdev, "Tx timeout, reset adapter context.\n");
adapter->ahw->reset_context = 1;
}
}
static struct net_device_stats *qlcnic_get_stats(struct net_device *netdev)
drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c
+3 -5
View File
@@ -280,9 +280,9 @@ void qlcnic_sriov_cleanup(struct qlcnic_adapter *adapter)
static int qlcnic_sriov_post_bc_msg(struct qlcnic_adapter *adapter, u32 *hdr,
u32 *pay, u8 pci_func, u8 size)
{
u32 rsp, mbx_val, fw_data, rsp_num, mbx_cmd, val, wait_time = 0;
struct qlcnic_hardware_context *ahw = adapter->ahw;
unsigned long flags;
u32 rsp, mbx_val, fw_data, rsp_num, mbx_cmd, val;
u16 opcode;
u8 mbx_err_code;
int i, j;
@@ -330,15 +330,13 @@ static int qlcnic_sriov_post_bc_msg(struct qlcnic_adapter *adapter, u32 *hdr,
* assume something is wrong.
*/
poll:
rsp = qlcnic_83xx_mbx_poll(adapter);
rsp = qlcnic_83xx_mbx_poll(adapter, &wait_time);
if (rsp != QLCNIC_RCODE_TIMEOUT) {
/* Get the FW response data */
fw_data = readl(QLCNIC_MBX_FW(ahw, 0));
if (fw_data & QLCNIC_MBX_ASYNC_EVENT) {
__qlcnic_83xx_process_aen(adapter);
mbx_val = QLCRDX(ahw, QLCNIC_HOST_MBX_CTRL);
if (mbx_val)
goto poll;
goto poll;
}
mbx_err_code = QLCNIC_MBX_STATUS(fw_data);
rsp_num = QLCNIC_MBX_NUM_REGS(fw_data);
drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c
-3
View File
@@ -1133,9 +1133,6 @@ static int qlcnic_sriov_validate_linkevent(struct qlcnic_vf_info *vf,
if ((cmd->req.arg[1] >> 16) != vf->rx_ctx_id)
return -EINVAL;
if (!(cmd->req.arg[1] & BIT_8))
return -EINVAL;
return 0;
}
drivers/net/ethernet/qlogic/qlge/qlge_main.c
+7
View File
@@ -1106,6 +1106,7 @@ static int ql_get_next_chunk(struct ql_adapter *qdev, struct rx_ring *rx_ring,
if (pci_dma_mapping_error(qdev->pdev, map)) {
__free_pages(rx_ring->pg_chunk.page,
qdev->lbq_buf_order);
rx_ring->pg_chunk.page = NULL;
netif_err(qdev, drv, qdev->ndev,
"PCI mapping failed.\n");
return -ENOMEM;
@@ -2777,6 +2778,12 @@ static void ql_free_lbq_buffers(struct ql_adapter *qdev, struct rx_ring *rx_ring
curr_idx = 0;
}
if (rx_ring->pg_chunk.page) {
pci_unmap_page(qdev->pdev, rx_ring->pg_chunk.map,
ql_lbq_block_size(qdev), PCI_DMA_FROMDEVICE);
put_page(rx_ring->pg_chunk.page);
rx_ring->pg_chunk.page = NULL;
}
}
static void ql_free_sbq_buffers(struct ql_adapter *qdev, struct rx_ring *rx_ring)
Loaded 20 of 48 files, more files were not shown because too many files have changed in this diff. Show more