/spare/repo/libata-dev branch 'iomap-try3'

Documentation/networking/cxgb.txt

@@ -0,0 +1,352 @@
+                 Chelsio N210 10Gb Ethernet Network Controller
+
+                         Driver Release Notes for Linux
+
+                                 Version 2.1.1
+
+                                 June 20, 2005
+
+CONTENTS
+========
+ INTRODUCTION
+ FEATURES
+ PERFORMANCE
+ DRIVER MESSAGES
+ KNOWN ISSUES
+ SUPPORT
+
+
+INTRODUCTION
+============
+
+ This document describes the Linux driver for Chelsio 10Gb Ethernet Network
+ Controller. This driver supports the Chelsio N210 NIC and is backward
+ compatible with the Chelsio N110 model 10Gb NICs.
+
+
+FEATURES
+========
+
+ Adaptive Interrupts (adaptive-rx)
+ ---------------------------------
+
+  This feature provides an adaptive algorithm that adjusts the interrupt
+  coalescing parameters, allowing the driver to dynamically adapt the latency
+  settings to achieve the highest performance during various types of network
+  load.
+
+  The interface used to control this feature is ethtool. Please see the
+  ethtool manpage for additional usage information.
+
+  By default, adaptive-rx is disabled.
+  To enable adaptive-rx:
+
+      ethtool -C <interface> adaptive-rx on
+
+  To disable adaptive-rx, use ethtool:
+
+      ethtool -C <interface> adaptive-rx off
+
+  After disabling adaptive-rx, the timer latency value will be set to 50us.
+  You may set the timer latency after disabling adaptive-rx:
+
+      ethtool -C <interface> rx-usecs <microseconds>
+
+  An example to set the timer latency value to 100us on eth0:
+
+      ethtool -C eth0 rx-usecs 100
+
+  You may also provide a timer latency value while disabling adpative-rx:
+
+      ethtool -C <interface> adaptive-rx off rx-usecs <microseconds>
+
+  If adaptive-rx is disabled and a timer latency value is specified, the timer
+  will be set to the specified value until changed by the user or until
+  adaptive-rx is enabled.
+
+  To view the status of the adaptive-rx and timer latency values:
+
+      ethtool -c <interface>
+
+
+ TCP Segmentation Offloading (TSO) Support
+ -----------------------------------------
+
+  This feature, also known as "large send", enables a system's protocol stack
+  to offload portions of outbound TCP processing to a network interface card
+  thereby reducing system CPU utilization and enhancing performance.
+
+  The interface used to control this feature is ethtool version 1.8 or higher.
+  Please see the ethtool manpage for additional usage information.
+
+  By default, TSO is enabled.
+  To disable TSO:
+
+      ethtool -K <interface> tso off
+
+  To enable TSO:
+
+      ethtool -K <interface> tso on
+
+  To view the status of TSO:
+
+      ethtool -k <interface>
+
+
+PERFORMANCE
+===========
+
+ The following information is provided as an example of how to change system
+ parameters for "performance tuning" an what value to use. You may or may not
+ want to change these system parameters, depending on your server/workstation
+ application. Doing so is not warranted in any way by Chelsio Communications,
+ and is done at "YOUR OWN RISK". Chelsio will not be held responsible for loss
+ of data or damage to equipment.
+
+ Your distribution may have a different way of doing things, or you may prefer
+ a different method. These commands are shown only to provide an example of
+ what to do and are by no means definitive.
+
+ Making any of the following system changes will only last until you reboot
+ your system. You may want to write a script that runs at boot-up which
+ includes the optimal settings for your system.
+
+  Setting PCI Latency Timer:
+      setpci -d 1425:* 0x0c.l=0x0000F800
+
+  Disabling TCP timestamp:
+      sysctl -w net.ipv4.tcp_timestamps=0
+
+  Disabling SACK:
+      sysctl -w net.ipv4.tcp_sack=0
+
+  Setting large number of incoming connection requests:
+      sysctl -w net.ipv4.tcp_max_syn_backlog=3000
+
+  Setting maximum receive socket buffer size:
+      sysctl -w net.core.rmem_max=1024000
+
+  Setting maximum send socket buffer size:
+      sysctl -w net.core.wmem_max=1024000
+
+  Set smp_affinity (on a multiprocessor system) to a single CPU:
+      echo 1 > /proc/irq/<interrupt_number>/smp_affinity
+
+  Setting default receive socket buffer size:
+      sysctl -w net.core.rmem_default=524287
+
+  Setting default send socket buffer size:
+      sysctl -w net.core.wmem_default=524287
+
+  Setting maximum option memory buffers:
+      sysctl -w net.core.optmem_max=524287
+
+  Setting maximum backlog (# of unprocessed packets before kernel drops):
+      sysctl -w net.core.netdev_max_backlog=300000
+
+  Setting TCP read buffers (min/default/max):
+      sysctl -w net.ipv4.tcp_rmem="10000000 10000000 10000000"
+
+  Setting TCP write buffers (min/pressure/max):
+      sysctl -w net.ipv4.tcp_wmem="10000000 10000000 10000000"
+
+  Setting TCP buffer space (min/pressure/max):
+      sysctl -w net.ipv4.tcp_mem="10000000 10000000 10000000"
+
+  TCP window size for single connections:
+   The receive buffer (RX_WINDOW) size must be at least as large as the
+   Bandwidth-Delay Product of the communication link between the sender and
+   receiver. Due to the variations of RTT, you may want to increase the buffer
+   size up to 2 times the Bandwidth-Delay Product. Reference page 289 of
+   "TCP/IP Illustrated, Volume 1, The Protocols" by W. Richard Stevens.
+   At 10Gb speeds, use the following formula:
+       RX_WINDOW >= 1.25MBytes * RTT(in milliseconds)
+       Example for RTT with 100us: RX_WINDOW = (1,250,000 * 0.1) = 125,000
+   RX_WINDOW sizes of 256KB - 512KB should be sufficient.
+   Setting the min, max, and default receive buffer (RX_WINDOW) size:
+       sysctl -w net.ipv4.tcp_rmem="<min> <default> <max>"
+
+  TCP window size for multiple connections:
+   The receive buffer (RX_WINDOW) size may be calculated the same as single
+   connections, but should be divided by the number of connections. The
+   smaller window prevents congestion and facilitates better pacing,
+   especially if/when MAC level flow control does not work well or when it is
+   not supported on the machine. Experimentation may be necessary to attain
+   the correct value. This method is provided as a starting point fot the
+   correct receive buffer size.
+   Setting the min, max, and default receive buffer (RX_WINDOW) size is
+   performed in the same manner as single connection.
+
+
+DRIVER MESSAGES
+===============
+
+ The following messages are the most common messages logged by syslog. These
+ may be found in /var/log/messages.
+
+  Driver up:
+     Chelsio Network Driver - version 2.1.1
+
+  NIC detected:
+     eth#: Chelsio N210 1x10GBaseX NIC (rev #), PCIX 133MHz/64-bit
+
+  Link up:
+     eth#: link is up at 10 Gbps, full duplex
+
+  Link down:
+     eth#: link is down
+
+
+KNOWN ISSUES
+============
+
+ These issues have been identified during testing. The following information
+ is provided as a workaround to the problem. In some cases, this problem is
+ inherent to Linux or to a particular Linux Distribution and/or hardware
+ platform.
+
+  1. Large number of TCP retransmits on a multiprocessor (SMP) system.
+
+      On a system with multiple CPUs, the interrupt (IRQ) for the network
+      controller may be bound to more than one CPU. This will cause TCP
+      retransmits if the packet data were to be split across different CPUs
+      and re-assembled in a different order than expected.
+
+      To eliminate the TCP retransmits, set smp_affinity on the particular
+      interrupt to a single CPU. You can locate the interrupt (IRQ) used on
+      the N110/N210 by using ifconfig:
+          ifconfig <dev_name> | grep Interrupt
+      Set the smp_affinity to a single CPU:
+          echo 1 > /proc/irq/<interrupt_number>/smp_affinity
+
+      It is highly suggested that you do not run the irqbalance daemon on your
+      system, as this will change any smp_affinity setting you have applied.
+      The irqbalance daemon runs on a 10 second interval and binds interrupts
+      to the least loaded CPU determined by the daemon. To disable this daemon:
+          chkconfig --level 2345 irqbalance off
+
+      By default, some Linux distributions enable the kernel feature,
+      irqbalance, which performs the same function as the daemon. To disable
+      this feature, add the following line to your bootloader:
+          noirqbalance
+
+          Example using the Grub bootloader:
+              title Red Hat Enterprise Linux AS (2.4.21-27.ELsmp)
+              root (hd0,0)
+              kernel /vmlinuz-2.4.21-27.ELsmp ro root=/dev/hda3 noirqbalance
+              initrd /initrd-2.4.21-27.ELsmp.img
+
+  2. After running insmod, the driver is loaded and the incorrect network
+     interface is brought up without running ifup.
+
+      When using 2.4.x kernels, including RHEL kernels, the Linux kernel
+      invokes a script named "hotplug". This script is primarily used to
+      automatically bring up USB devices when they are plugged in, however,
+      the script also attempts to automatically bring up a network interface
+      after loading the kernel module. The hotplug script does this by scanning
+      the ifcfg-eth# config files in /etc/sysconfig/network-scripts, looking
+      for HWADDR=<mac_address>.
+
+      If the hotplug script does not find the HWADDRR within any of the
+      ifcfg-eth# files, it will bring up the device with the next available
+      interface name. If this interface is already configured for a different
+      network card, your new interface will have incorrect IP address and
+      network settings.
+
+      To solve this issue, you can add the HWADDR=<mac_address> key to the
+      interface config file of your network controller.
+
+      To disable this "hotplug" feature, you may add the driver (module name)
+      to the "blacklist" file located in /etc/hotplug. It has been noted that
+      this does not work for network devices because the net.agent script
+      does not use the blacklist file. Simply remove, or rename, the net.agent
+      script located in /etc/hotplug to disable this feature.
+
+  3. Transport Protocol (TP) hangs when running heavy multi-connection traffic
+     on an AMD Opteron system with HyperTransport PCI-X Tunnel chipset.
+
+      If your AMD Opteron system uses the AMD-8131 HyperTransport PCI-X Tunnel
+      chipset, you may experience the "133-Mhz Mode Split Completion Data
+      Corruption" bug identified by AMD while using a 133Mhz PCI-X card on the
+      bus PCI-X bus.
+
+      AMD states, "Under highly specific conditions, the AMD-8131 PCI-X Tunnel
+      can provide stale data via split completion cycles to a PCI-X card that
+      is operating at 133 Mhz", causing data corruption.
+
+      AMD's provides three workarounds for this problem, however, Chelsio
+      recommends the first option for best performance with this bug:
+
+        For 133Mhz secondary bus operation, limit the transaction length and
+        the number of outstanding transactions, via BIOS configuration
+        programming of the PCI-X card, to the following:
+
+           Data Length (bytes): 1k
+           Total allowed outstanding transactions: 2
+
+      Please refer to AMD 8131-HT/PCI-X Errata 26310 Rev 3.08 August 2004,
+      section 56, "133-MHz Mode Split Completion Data Corruption" for more
+      details with this bug and workarounds suggested by AMD.
+
+      It may be possible to work outside AMD's recommended PCI-X settings, try
+      increasing the Data Length to 2k bytes for increased performance. If you
+      have issues with these settings, please revert to the "safe" settings
+      and duplicate the problem before submitting a bug or asking for support.
+
+      NOTE: The default setting on most systems is 8 outstanding transactions
+            and 2k bytes data length.
+
+  4. On multiprocessor systems, it has been noted that an application which
+     is handling 10Gb networking can switch between CPUs causing degraded
+     and/or unstable performance.
+
+      If running on an SMP system and taking performance measurements, it
+      is suggested you either run the latest netperf-2.4.0+ or use a binding
+      tool such as Tim Hockin's procstate utilities (runon)
+      <http://www.hockin.org/~thockin/procstate/>.
+
+      Binding netserver and netperf (or other applications) to particular
+      CPUs will have a significant difference in performance measurements.
+      You may need to experiment which CPU to bind the application to in
+      order to achieve the best performance for your system.
+
+      If you are developing an application designed for 10Gb networking,
+      please keep in mind you may want to look at kernel functions
+      sched_setaffinity & sched_getaffinity to bind your application.
+
+      If you are just running user-space applications such as ftp, telnet,
+      etc., you may want to try the runon tool provided by Tim Hockin's
+      procstate utility. You could also try binding the interface to a
+      particular CPU: runon 0 ifup eth0
+
+
+SUPPORT
+=======
+
+ If you have problems with the software or hardware, please contact our
+ customer support team via email at support@chelsio.com or check our website
+ at http://www.chelsio.com
+
+===============================================================================
+
+ Chelsio Communications
+ 370 San Aleso Ave.
+ Suite 100
+ Sunnyvale, CA 94085
+ http://www.chelsio.com
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License, version 2, as
+published by the Free Software Foundation.
+
+You should have received a copy of the GNU General Public License along
+with this program; if not, write to the Free Software Foundation, Inc.,
+59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+
+THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED
+WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+
+ Copyright (c) 2003-2005 Chelsio Communications. All rights reserved.
+
+===============================================================================

Documentation/sound/alsa/ALSA-Configuration.txt

@@ -132,6 +132,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     mpu_irq	- IRQ # for MPU-401 UART (PnP setup)
     dma1	- first DMA # for AD1816A chip (PnP setup)
     dma2	- second DMA # for AD1816A chip (PnP setup)
+    clockfreq   - Clock frequency for AD1816A chip (default = 0, 33000Hz)
     
     Module supports up to 8 cards, autoprobe and PnP.
     

Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl

@@ -3422,10 +3422,17 @@ struct _snd_pcm_runtime {
 
       <para>
         The <structfield>iface</structfield> field specifies the type of
-      the control,
-      <constant>SNDRV_CTL_ELEM_IFACE_XXX</constant>. There are
-      <constant>MIXER</constant>, <constant>PCM</constant>,
-      <constant>CARD</constant>, etc.
+      the control, <constant>SNDRV_CTL_ELEM_IFACE_XXX</constant>, which
+      is usually <constant>MIXER</constant>.
+      Use <constant>CARD</constant> for global controls that are not
+      logically part of the mixer.
+      If the control is closely associated with some specific device on
+      the sound card, use <constant>HWDEP</constant>,
+      <constant>PCM</constant>, <constant>RAWMIDI</constant>,
+      <constant>TIMER</constant>, or <constant>SEQUENCER</constant>, and
+      specify the device number with the
+      <structfield>device</structfield> and
+      <structfield>subdevice</structfield> fields.
       </para>
 
       <para>

MAINTAINERS

@@ -2092,6 +2092,12 @@ M:	support@simtec.co.uk
 W:	http://www.simtec.co.uk/products/EB2410ITX/
 S:	Supported
 
+SIS 190 ETHERNET DRIVER
+P:	Francois Romieu
+M:	romieu@fr.zoreil.com
+L:	netdev@vger.kernel.org
+S:	Maintained
+
 SIS 5513 IDE CONTROLLER DRIVER
 P:	Lionel Bouton
 M:	Lionel.Bouton@inet6.fr

arch/i386/pci/common.c

@@ -165,7 +165,6 @@ static int __init pcibios_init(void)
 	if ((pci_probe & PCI_BIOS_SORT) && !(pci_probe & PCI_NO_SORT))
 		pcibios_sort();
 #endif
-	pci_assign_unassigned_resources();
 	return 0;
 }
 

arch/i386/pci/i386.c

@@ -170,43 +170,26 @@ static void __init pcibios_allocate_resources(int pass)
 static int __init pcibios_assign_resources(void)
 {
 	struct pci_dev *dev = NULL;
-	int idx;
-	struct resource *r;
+	struct resource *r, *pr;
 
-	for_each_pci_dev(dev) {
-		int class = dev->class >> 8;
-
-		/* Don't touch classless devices and host bridges */
-		if (!class || class == PCI_CLASS_BRIDGE_HOST)
-			continue;
-
-		for(idx=0; idx<6; idx++) {
-			r = &dev->resource[idx];
-
-			/*
-			 *  Don't touch IDE controllers and I/O ports of video cards!
-			 */
-			if ((class == PCI_CLASS_STORAGE_IDE && idx < 4) ||
-			    (class == PCI_CLASS_DISPLAY_VGA && (r->flags & IORESOURCE_IO)))
-				continue;
-
-			/*
-			 *  We shall assign a new address to this resource, either because
-			 *  the BIOS forgot to do so or because we have decided the old
-			 *  address was unusable for some reason.
-			 */
-			if (!r->start && r->end)
-				pci_assign_resource(dev, idx);
-		}
-
-		if (pci_probe & PCI_ASSIGN_ROMS) {
+	if (!(pci_probe & PCI_ASSIGN_ROMS)) {
+		/* Try to use BIOS settings for ROMs, otherwise let
+		   pci_assign_unassigned_resources() allocate the new
+		   addresses. */
+		for_each_pci_dev(dev) {
 			r = &dev->resource[PCI_ROM_RESOURCE];
-			r->end -= r->start;
-			r->start = 0;
-			if (r->end)
-				pci_assign_resource(dev, PCI_ROM_RESOURCE);
+			if (!r->flags || !r->start)
+				continue;
+			pr = pci_find_parent_resource(dev, r);
+			if (!pr || request_resource(pr, r) < 0) {
+				r->end -= r->start;
+				r->start = 0;
+			}
 		}
 	}
+
+	pci_assign_unassigned_resources();
+
 	return 0;
 }
 

arch/ppc/syslib/m8xx_setup.c

@@ -57,7 +57,7 @@ unsigned char __res[sizeof(bd_t)];
 extern void m8xx_ide_init(void);
 
 extern unsigned long find_available_memory(void);
-extern void m8xx_cpm_reset();
+extern void m8xx_cpm_reset(void);
 extern void m8xx_wdt_handler_install(bd_t *bp);
 extern void rpxfb_alloc_pages(void);
 extern void cpm_interrupt_init(void);
@@ -266,8 +266,8 @@ m8xx_show_percpuinfo(struct seq_file *m, int i)
 
 	bp = (bd_t *)__res;
 
-	seq_printf(m, "clock\t\t: %ldMHz\n"
-		   "bus clock\t: %ldMHz\n",
+	seq_printf(m, "clock\t\t: %uMHz\n"
+		   "bus clock\t: %uMHz\n",
 		   bp->bi_intfreq / 1000000,
 		   bp->bi_busfreq / 1000000);
 

drivers/char/drm/Kconfig

@@ -23,13 +23,6 @@ config DRM_TDFX
 	  Choose this option if you have a 3dfx Banshee or Voodoo3 (or later),
 	  graphics card.  If M is selected, the module will be called tdfx.
 
-config DRM_GAMMA
-	tristate "3dlabs GMX 2000"
-	depends on DRM && BROKEN
-	help
-	  This is the old gamma driver, please tell me if it might actually
-	  work.
-
 config DRM_R128
 	tristate "ATI Rage 128"
 	depends on DRM && PCI
@@ -82,7 +75,7 @@ endchoice
 
 config DRM_MGA
 	tristate "Matrox g200/g400"
-	depends on DRM && AGP
+	depends on DRM
 	help
 	  Choose this option if you have a Matrox G200, G400 or G450 graphics
 	  card.  If M is selected, the module will be called mga.  AGP
@@ -103,3 +96,10 @@ config DRM_VIA
 	  Choose this option if you have a Via unichrome or compatible video
 	  chipset. If M is selected the module will be called via.
 
+config DRM_SAVAGE
+	tristate "Savage video cards"
+	depends on DRM
+	help
+	  Choose this option if you have a Savage3D/4/SuperSavage/Pro/Twister
+	  chipset. If M is selected the module will be called savage.
+

drivers/char/drm/Makefile

@@ -8,16 +8,16 @@ drm-objs    :=	drm_auth.o drm_bufs.o drm_context.o drm_dma.o drm_drawable.o \
 		drm_agpsupport.o drm_scatter.o ati_pcigart.o drm_pci.o \
 		drm_sysfs.o
 
-gamma-objs  := gamma_drv.o gamma_dma.o
 tdfx-objs   := tdfx_drv.o
 r128-objs   := r128_drv.o r128_cce.o r128_state.o r128_irq.o
 mga-objs    := mga_drv.o mga_dma.o mga_state.o mga_warp.o mga_irq.o
 i810-objs   := i810_drv.o i810_dma.o
 i830-objs   := i830_drv.o i830_dma.o i830_irq.o
 i915-objs   := i915_drv.o i915_dma.o i915_irq.o i915_mem.o
-radeon-objs := radeon_drv.o radeon_cp.o radeon_state.o radeon_mem.o radeon_irq.o
+radeon-objs := radeon_drv.o radeon_cp.o radeon_state.o radeon_mem.o radeon_irq.o r300_cmdbuf.o
 ffb-objs    := ffb_drv.o ffb_context.o
 sis-objs    := sis_drv.o sis_ds.o sis_mm.o
+savage-objs := savage_drv.o savage_bci.o savage_state.o
 via-objs    := via_irq.o via_drv.o via_ds.o via_map.o via_mm.o via_dma.o via_verifier.o via_video.o
 
 ifeq ($(CONFIG_COMPAT),y)
@@ -29,7 +29,6 @@ i915-objs   += i915_ioc32.o
 endif
 
 obj-$(CONFIG_DRM)	+= drm.o
-obj-$(CONFIG_DRM_GAMMA) += gamma.o
 obj-$(CONFIG_DRM_TDFX)	+= tdfx.o
 obj-$(CONFIG_DRM_R128)	+= r128.o
 obj-$(CONFIG_DRM_RADEON)+= radeon.o
@@ -39,5 +38,7 @@ obj-$(CONFIG_DRM_I830)	+= i830.o
 obj-$(CONFIG_DRM_I915)  += i915.o
 obj-$(CONFIG_DRM_FFB)   += ffb.o
 obj-$(CONFIG_DRM_SIS)   += sis.o
+obj-$(CONFIG_DRM_SAVAGE)+= savage.o
 obj-$(CONFIG_DRM_VIA)	+=via.o
 
+

drivers/char/drm/drm.h

@@ -98,7 +98,7 @@
 #define _DRM_LOCKING_CONTEXT(lock) ((lock) & ~(_DRM_LOCK_HELD|_DRM_LOCK_CONT))
 
 
-typedef unsigned long drm_handle_t;
+typedef unsigned int  drm_handle_t;
 typedef unsigned int  drm_context_t;
 typedef unsigned int  drm_drawable_t;
 typedef unsigned int  drm_magic_t;
@@ -209,7 +209,8 @@ typedef enum drm_map_type {
 	_DRM_REGISTERS	    = 1,  /**< no caching, no core dump */
 	_DRM_SHM	    = 2,  /**< shared, cached */
 	_DRM_AGP            = 3,  /**< AGP/GART */
-	_DRM_SCATTER_GATHER = 4	  /**< Scatter/gather memory for PCI DMA */
+	_DRM_SCATTER_GATHER = 4,  /**< Scatter/gather memory for PCI DMA */
+	_DRM_CONSISTENT     = 5,  /**< Consistent memory for PCI DMA */
 } drm_map_type_t;
 
 
@@ -368,7 +369,8 @@ typedef struct drm_buf_desc {
 	enum {
 		_DRM_PAGE_ALIGN = 0x01, /**< Align on page boundaries for DMA */
 		_DRM_AGP_BUFFER = 0x02, /**< Buffer is in AGP space */
-		_DRM_SG_BUFFER  = 0x04  /**< Scatter/gather memory buffer */
+		_DRM_SG_BUFFER  = 0x04, /**< Scatter/gather memory buffer */
+		_DRM_FB_BUFFER  = 0x08  /**< Buffer is in frame buffer */
 	}	      flags;
 	unsigned long agp_start; /**< 
 				  * Start address of where the AGP buffers are

drivers/char/drm/drmP.h

@@ -53,7 +53,6 @@
 #include <linux/init.h>
 #include <linux/file.h>
 #include <linux/pci.h>
-#include <linux/version.h>
 #include <linux/jiffies.h>
 #include <linux/smp_lock.h>	/* For (un)lock_kernel */
 #include <linux/mm.h>
@@ -96,6 +95,7 @@
 #define DRIVER_IRQ_SHARED  0x80
 #define DRIVER_IRQ_VBL     0x100
 #define DRIVER_DMA_QUEUE   0x200
+#define DRIVER_FB_DMA      0x400
 
 /***********************************************************************/
 /** \name Begin the DRM... */
@@ -160,36 +160,7 @@
 #define pte_unmap(pte)
 #endif
 
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,4,19)
-static inline struct page * vmalloc_to_page(void * vmalloc_addr)
-{
-	unsigned long addr = (unsigned long) vmalloc_addr;
-	struct page *page = NULL;
-	pgd_t *pgd = pgd_offset_k(addr);
-	pmd_t *pmd;
-	pte_t *ptep, pte;
-  
-	if (!pgd_none(*pgd)) {
-		pmd = pmd_offset(pgd, addr);
-		if (!pmd_none(*pmd)) {
-			preempt_disable();
-			ptep = pte_offset_map(pmd, addr);
-			pte = *ptep;
-			if (pte_present(pte))
-				page = pte_page(pte);
-			pte_unmap(ptep);
-			preempt_enable();
-		}
-	}
-	return page;
-}
-#endif
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
-#define DRM_RPR_ARG(vma)
-#else
 #define DRM_RPR_ARG(vma) vma,
-#endif
 
 #define VM_OFFSET(vma) ((vma)->vm_pgoff << PAGE_SHIFT)
 
@@ -474,7 +445,8 @@ typedef struct drm_device_dma {
 	unsigned long	  byte_count;
 	enum {
 		_DRM_DMA_USE_AGP = 0x01,
-		_DRM_DMA_USE_SG  = 0x02
+		_DRM_DMA_USE_SG  = 0x02,
+		_DRM_DMA_USE_FB  = 0x04
 	} flags;
 
 } drm_device_dma_t;
@@ -525,12 +497,19 @@ typedef struct drm_sigdata {
 	drm_hw_lock_t *lock;
 } drm_sigdata_t;
 
+typedef struct drm_dma_handle {
+	dma_addr_t busaddr;
+	void *vaddr;
+	size_t size;
+} drm_dma_handle_t;
+
 /**
  * Mappings list
  */
 typedef struct drm_map_list {
 	struct list_head	head;	/**< list head */
 	drm_map_t		*map;	/**< mapping */
+	unsigned int user_token;
 } drm_map_list_t;
 
 typedef drm_map_t drm_local_map_t;
@@ -578,7 +557,22 @@ struct drm_driver {
  	int (*kernel_context_switch)(struct drm_device *dev, int old, int new);
 	void (*kernel_context_switch_unlock)(struct drm_device *dev, drm_lock_t *lock);
 	int (*vblank_wait)(struct drm_device *dev, unsigned int *sequence);
+	
+	/**
+	 * Called by \c drm_device_is_agp.  Typically used to determine if a
+	 * card is really attached to AGP or not.
+	 *
+	 * \param dev  DRM device handle
+	 *
+	 * \returns
+	 * One of three values is returned depending on whether or not the
+	 * card is absolutely \b not AGP (return of 0), absolutely \b is AGP
+	 * (return of 1), or may or may not be AGP (return of 2).
+	 */
+	int (*device_is_agp) (struct drm_device * dev);
+
 	/* these have to be filled in */
+  
  	int (*postinit)(struct drm_device *, unsigned long flags);
 	irqreturn_t (*irq_handler)( DRM_IRQ_ARGS );
  	void (*irq_preinstall)(struct drm_device *dev);
@@ -722,11 +716,7 @@ typedef struct drm_device {
 	int               pci_slot;	/**< PCI slot number */
 	int               pci_func;	/**< PCI function number */
 #ifdef __alpha__
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,4,3)
-	struct pci_controler *hose;
-#else
 	struct pci_controller *hose;
-#endif
 #endif
 	drm_sg_mem_t      *sg;  /**< Scatter gather memory */
 	unsigned long     *ctx_bitmap;	/**< context bitmap */
@@ -736,6 +726,7 @@ typedef struct drm_device {
 
 	struct            drm_driver *driver;
 	drm_local_map_t   *agp_buffer_map;
+	unsigned int agp_buffer_token;
 	drm_head_t primary;		/**< primary screen head */
 } drm_device_t;
 
@@ -806,7 +797,7 @@ extern void	     *drm_ioremap_nocache(unsigned long offset, unsigned long size,
 					   drm_device_t *dev);
 extern void	     drm_ioremapfree(void *pt, unsigned long size, drm_device_t *dev);
 
-extern DRM_AGP_MEM   *drm_alloc_agp(struct agp_bridge_data *bridge, int pages, u32 type);
+extern DRM_AGP_MEM   *drm_alloc_agp(drm_device_t *dev, int pages, u32 type);
 extern int           drm_free_agp(DRM_AGP_MEM *handle, int pages);
 extern int           drm_bind_agp(DRM_AGP_MEM *handle, unsigned int start);
 extern int           drm_unbind_agp(DRM_AGP_MEM *handle);
@@ -881,11 +872,19 @@ extern int	     drm_lock_free(drm_device_t *dev,
 				    unsigned int context);
 
 				/* Buffer management support (drm_bufs.h) */
+extern int drm_addbufs_agp(drm_device_t *dev, drm_buf_desc_t *request);
+extern int drm_addbufs_pci(drm_device_t *dev, drm_buf_desc_t *request);
+extern int drm_addmap(drm_device_t *dev, unsigned int offset,
+		      unsigned int size, drm_map_type_t type,
+		      drm_map_flags_t flags, drm_local_map_t **map_ptr);
+extern int drm_addmap_ioctl(struct inode *inode, struct file *filp,
+			    unsigned int cmd, unsigned long arg);
+extern int drm_rmmap(drm_device_t *dev, drm_local_map_t *map);
+extern int drm_rmmap_locked(drm_device_t *dev, drm_local_map_t *map);
+extern int drm_rmmap_ioctl(struct inode *inode, struct file *filp,
+			   unsigned int cmd, unsigned long arg);
+
 extern int	     drm_order( unsigned long size );
-extern int	     drm_addmap( struct inode *inode, struct file *filp,
-				  unsigned int cmd, unsigned long arg );
-extern int	     drm_rmmap( struct inode *inode, struct file *filp,
-				 unsigned int cmd, unsigned long arg );
 extern int	     drm_addbufs( struct inode *inode, struct file *filp,
 				   unsigned int cmd, unsigned long arg );
 extern int	     drm_infobufs( struct inode *inode, struct file *filp,
@@ -896,6 +895,10 @@ extern int	     drm_freebufs( struct inode *inode, struct file *filp,
 				    unsigned int cmd, unsigned long arg );
 extern int	     drm_mapbufs( struct inode *inode, struct file *filp,
 				   unsigned int cmd, unsigned long arg );
+extern unsigned long drm_get_resource_start(drm_device_t *dev,
+					    unsigned int resource);
+extern unsigned long drm_get_resource_len(drm_device_t *dev,
+					  unsigned int resource);
 
 				/* DMA support (drm_dma.h) */
 extern int	     drm_dma_setup(drm_device_t *dev);
@@ -919,15 +922,18 @@ extern void          drm_vbl_send_signals( drm_device_t *dev );
 
 				/* AGP/GART support (drm_agpsupport.h) */
 extern drm_agp_head_t *drm_agp_init(drm_device_t *dev);
-extern int            drm_agp_acquire(struct inode *inode, struct file *filp,
-				       unsigned int cmd, unsigned long arg);
-extern void           drm_agp_do_release(drm_device_t *dev);
-extern int            drm_agp_release(struct inode *inode, struct file *filp,
-				       unsigned int cmd, unsigned long arg);
-extern int            drm_agp_enable(struct inode *inode, struct file *filp,
-				      unsigned int cmd, unsigned long arg);
-extern int            drm_agp_info(struct inode *inode, struct file *filp,
-				    unsigned int cmd, unsigned long arg);
+extern int drm_agp_acquire(drm_device_t * dev);
+extern int drm_agp_acquire_ioctl(struct inode *inode, struct file *filp,
+			   unsigned int cmd, unsigned long arg);
+extern int drm_agp_release(drm_device_t *dev);
+extern int drm_agp_release_ioctl(struct inode *inode, struct file *filp,
+			   unsigned int cmd, unsigned long arg);
+extern int drm_agp_enable(drm_device_t *dev, drm_agp_mode_t mode);
+extern int drm_agp_enable_ioctl(struct inode *inode, struct file *filp,
+			  unsigned int cmd, unsigned long arg);
+extern int drm_agp_info(drm_device_t * dev, drm_agp_info_t *info);
+extern int drm_agp_info_ioctl(struct inode *inode, struct file *filp,
+			unsigned int cmd, unsigned long arg);
 extern int            drm_agp_alloc(struct inode *inode, struct file *filp,
 				     unsigned int cmd, unsigned long arg);
 extern int            drm_agp_free(struct inode *inode, struct file *filp,
@@ -976,12 +982,10 @@ extern int            drm_ati_pcigart_cleanup(drm_device_t *dev,
 					       unsigned long addr,
 					       dma_addr_t bus_addr);
 
-extern void *drm_pci_alloc(drm_device_t * dev, size_t size,
-			   size_t align, dma_addr_t maxaddr,
-			   dma_addr_t * busaddr);
-
-extern void drm_pci_free(drm_device_t * dev, size_t size,
-			 void *vaddr, dma_addr_t busaddr);
+extern drm_dma_handle_t *drm_pci_alloc(drm_device_t *dev, size_t size,
+				       size_t align, dma_addr_t maxaddr);
+extern void __drm_pci_free(drm_device_t *dev, drm_dma_handle_t *dmah);
+extern void drm_pci_free(drm_device_t *dev, drm_dma_handle_t *dmah);
 
 			       /* sysfs support (drm_sysfs.c) */
 struct drm_sysfs_class;
@@ -1012,17 +1016,26 @@ static __inline__ void drm_core_ioremapfree(struct drm_map *map, struct drm_devi
 		drm_ioremapfree( map->handle, map->size, dev );
 }
 
-static __inline__ struct drm_map *drm_core_findmap(struct drm_device *dev, unsigned long offset)
+static __inline__ struct drm_map *drm_core_findmap(struct drm_device *dev, unsigned int token)
 {
-	struct list_head *_list;
-	list_for_each( _list, &dev->maplist->head ) {
-		drm_map_list_t *_entry = list_entry( _list, drm_map_list_t, head );
-		if ( _entry->map &&
-		     _entry->map->offset == offset ) {
+	drm_map_list_t *_entry;
+	list_for_each_entry(_entry, &dev->maplist->head, head)
+		if (_entry->user_token == token)
 			return _entry->map;
+	return NULL;
+}
+
+static __inline__ int drm_device_is_agp(drm_device_t *dev)
+{
+	if ( dev->driver->device_is_agp != NULL ) {
+		int err = (*dev->driver->device_is_agp)( dev );
+	
+		if (err != 2) {
+			return err;
 		}
 	}
-	return NULL;
+
+	return pci_find_capability(dev->pdev, PCI_CAP_ID_AGP);
 }
 
 static __inline__ void drm_core_dropmap(struct drm_map *map)

drivers/char/drm/drm_agpsupport.c

@@ -37,7 +37,7 @@
 #if __OS_HAS_AGP
 
 /**
- * AGP information ioctl.
+ * Get AGP information.
  *
  * \param inode device inode.
  * \param filp file pointer.
@@ -48,51 +48,56 @@
  * Verifies the AGP device has been initialized and acquired and fills in the
  * drm_agp_info structure with the information in drm_agp_head::agp_info.
  */
-int drm_agp_info(struct inode *inode, struct file *filp,
-		  unsigned int cmd, unsigned long arg)
+int drm_agp_info(drm_device_t *dev, drm_agp_info_t *info)
 {
-	drm_file_t	 *priv	 = filp->private_data;
-	drm_device_t	 *dev	 = priv->head->dev;
 	DRM_AGP_KERN     *kern;
-	drm_agp_info_t   info;
 
 	if (!dev->agp || !dev->agp->acquired)
 		return -EINVAL;
 
 	kern                   = &dev->agp->agp_info;
-	info.agp_version_major = kern->version.major;
-	info.agp_version_minor = kern->version.minor;
-	info.mode              = kern->mode;
-	info.aperture_base     = kern->aper_base;
-	info.aperture_size     = kern->aper_size * 1024 * 1024;
-	info.memory_allowed    = kern->max_memory << PAGE_SHIFT;
-	info.memory_used       = kern->current_memory << PAGE_SHIFT;
-	info.id_vendor         = kern->device->vendor;
-	info.id_device         = kern->device->device;
+	info->agp_version_major = kern->version.major;
+	info->agp_version_minor = kern->version.minor;
+	info->mode              = kern->mode;
+	info->aperture_base     = kern->aper_base;
+	info->aperture_size     = kern->aper_size * 1024 * 1024;
+	info->memory_allowed    = kern->max_memory << PAGE_SHIFT;
+	info->memory_used       = kern->current_memory << PAGE_SHIFT;
+	info->id_vendor         = kern->device->vendor;
+	info->id_device         = kern->device->device;
 
-	if (copy_to_user((drm_agp_info_t __user *)arg, &info, sizeof(info)))
+	return 0;
+}
+EXPORT_SYMBOL(drm_agp_info);
+
+int drm_agp_info_ioctl(struct inode *inode, struct file *filp,
+		 unsigned int cmd, unsigned long arg)
+{
+	drm_file_t *priv = filp->private_data;
+	drm_device_t *dev = priv->head->dev;
+	drm_agp_info_t info;
+	int err;
+
+	err = drm_agp_info(dev, &info);
+	if (err)
+		return err;
+	
+	if (copy_to_user((drm_agp_info_t __user *) arg, &info, sizeof(info)))
 		return -EFAULT;
 	return 0;
 }
 
 /**
- * Acquire the AGP device (ioctl).
+ * Acquire the AGP device.
  *
- * \param inode device inode.
- * \param filp file pointer.
- * \param cmd command.
- * \param arg user argument.
+ * \param dev DRM device that is to acquire AGP
  * \return zero on success or a negative number on failure. 
  *
  * Verifies the AGP device hasn't been acquired before and calls
- * agp_acquire().
+ * \c agp_backend_acquire.
  */
-int drm_agp_acquire(struct inode *inode, struct file *filp,
-		     unsigned int cmd, unsigned long arg)
+int drm_agp_acquire(drm_device_t *dev)
 {
-	drm_file_t	 *priv	 = filp->private_data;
-	drm_device_t	 *dev	 = priv->head->dev;
-
 	if (!dev->agp)
 		return -ENODEV;
 	if (dev->agp->acquired)
@@ -102,9 +107,10 @@ int drm_agp_acquire(struct inode *inode, struct file *filp,
 	dev->agp->acquired = 1;
 	return 0;
 }
+EXPORT_SYMBOL(drm_agp_acquire);
 
 /**
- * Release the AGP device (ioctl).
+ * Acquire the AGP device (ioctl).
  *
  * \param inode device inode.
  * \param filp file pointer.
@@ -112,63 +118,80 @@ int drm_agp_acquire(struct inode *inode, struct file *filp,
  * \param arg user argument.
  * \return zero on success or a negative number on failure.
  *
- * Verifies the AGP device has been acquired and calls agp_backend_release().
+ * Verifies the AGP device hasn't been acquired before and calls
+ * \c agp_backend_acquire.
  */
-int drm_agp_release(struct inode *inode, struct file *filp,
-		     unsigned int cmd, unsigned long arg)
+int drm_agp_acquire_ioctl(struct inode *inode, struct file *filp,
+			  unsigned int cmd, unsigned long arg)
 {
-	drm_file_t	 *priv	 = filp->private_data;
-	drm_device_t	 *dev	 = priv->head->dev;
-
-	if (!dev->agp || !dev->agp->acquired)
-		return -EINVAL;
-	agp_backend_release(dev->agp->bridge);
-	dev->agp->acquired = 0;
-	return 0;
-
+	drm_file_t *priv = filp->private_data;
+	
+	return drm_agp_acquire( (drm_device_t *) priv->head->dev );
 }
 
 /**
  * Release the AGP device.
  *
- * Calls agp_backend_release().
+ * \param dev DRM device that is to release AGP
+ * \return zero on success or a negative number on failure.
+ *
+ * Verifies the AGP device has been acquired and calls \c agp_backend_release.
  */
-void drm_agp_do_release(drm_device_t *dev)
+int drm_agp_release(drm_device_t *dev)
 {
-  agp_backend_release(dev->agp->bridge);
+	if (!dev->agp || !dev->agp->acquired)
+		return -EINVAL;
+	agp_backend_release(dev->agp->bridge);
+	dev->agp->acquired = 0;
+	return 0;
+}
+EXPORT_SYMBOL(drm_agp_release);
+
+int drm_agp_release_ioctl(struct inode *inode, struct file *filp,
+			  unsigned int cmd, unsigned long arg)
+{
+	drm_file_t *priv = filp->private_data;
+	drm_device_t *dev = priv->head->dev;
+	
+	return drm_agp_release(dev);
 }
 
 /**
  * Enable the AGP bus.
  * 
- * \param inode device inode.
- * \param filp file pointer.
- * \param cmd command.
- * \param arg pointer to a drm_agp_mode structure.
+ * \param dev DRM device that has previously acquired AGP.
+ * \param mode Requested AGP mode.
  * \return zero on success or a negative number on failure.
  *
  * Verifies the AGP device has been acquired but not enabled, and calls
- * agp_enable().
+ * \c agp_enable.
  */
-int drm_agp_enable(struct inode *inode, struct file *filp,
-		    unsigned int cmd, unsigned long arg)
+int drm_agp_enable(drm_device_t *dev, drm_agp_mode_t mode)
 {
-	drm_file_t	 *priv	 = filp->private_data;
-	drm_device_t	 *dev	 = priv->head->dev;
-	drm_agp_mode_t   mode;
-
 	if (!dev->agp || !dev->agp->acquired)
 		return -EINVAL;
 
-	if (copy_from_user(&mode, (drm_agp_mode_t __user *)arg, sizeof(mode)))
-		return -EFAULT;
-
 	dev->agp->mode    = mode.mode;
 	agp_enable(dev->agp->bridge, mode.mode);
 	dev->agp->base    = dev->agp->agp_info.aper_base;
 	dev->agp->enabled = 1;
 	return 0;
 }
+EXPORT_SYMBOL(drm_agp_enable);
+
+int drm_agp_enable_ioctl(struct inode *inode, struct file *filp,
+		   unsigned int cmd, unsigned long arg)
+{
+	drm_file_t *priv = filp->private_data;
+	drm_device_t *dev = priv->head->dev;
+	drm_agp_mode_t mode;
+
+
+	if (copy_from_user(&mode, (drm_agp_mode_t __user *) arg, sizeof(mode)))
+		return -EFAULT;
+
+	return drm_agp_enable(dev, mode);
+}
 
 /**
  * Allocate AGP memory.
@@ -206,7 +229,7 @@ int drm_agp_alloc(struct inode *inode, struct file *filp,
 	pages = (request.size + PAGE_SIZE - 1) / PAGE_SIZE;
 	type = (u32) request.type;
 
-	if (!(memory = drm_alloc_agp(dev->agp->bridge, pages, type))) {
+	if (!(memory = drm_alloc_agp(dev, pages, type))) {
 		drm_free(entry, sizeof(*entry), DRM_MEM_AGPLISTS);
 		return -ENOMEM;
 	}
@@ -403,13 +426,8 @@ drm_agp_head_t *drm_agp_init(drm_device_t *dev)
 		return NULL;
 	}
 	head->memory = NULL;
-#if LINUX_VERSION_CODE <= 0x020408
-	head->cant_use_aperture = 0;
-	head->page_mask = ~(0xfff);
-#else
 	head->cant_use_aperture = head->agp_info.cant_use_aperture;
 	head->page_mask = head->agp_info.page_mask;
-#endif
 
 	return head;
 }
@@ -436,6 +454,7 @@ int drm_agp_bind_memory(DRM_AGP_MEM *handle, off_t start)
 		return -EINVAL;
 	return agp_bind_memory(handle, start);
 }
+EXPORT_SYMBOL(drm_agp_bind_memory);
 
 /** Calls agp_unbind_memory() */
 int drm_agp_unbind_memory(DRM_AGP_MEM *handle)

drivers/char/drm/drm_context.c

@@ -212,6 +212,7 @@ int drm_getsareactx(struct inode *inode, struct file *filp,
 	drm_ctx_priv_map_t __user *argp = (void __user *)arg;
 	drm_ctx_priv_map_t request;
 	drm_map_t *map;
+	drm_map_list_t *_entry;
 
 	if (copy_from_user(&request, argp, sizeof(request)))
 		return -EFAULT;
@@ -225,7 +226,17 @@ int drm_getsareactx(struct inode *inode, struct file *filp,
 	map = dev->context_sareas[request.ctx_id];
 	up(&dev->struct_sem);
 
-	request.handle = (void *) map->offset;
+	request.handle = 0;
+	list_for_each_entry(_entry, &dev->maplist->head,head) {
+		if (_entry->map == map) {
+			request.handle = (void *)(unsigned long)_entry->user_token;
+			break;
+		}
+	}
+	if (request.handle == 0)
+		return -EINVAL;
+
+
 	if (copy_to_user(argp, &request, sizeof(request)))
 		return -EFAULT;
 	return 0;
@@ -262,7 +273,7 @@ int drm_setsareactx(struct inode *inode, struct file *filp,
 	list_for_each(list, &dev->maplist->head) {
 		r_list = list_entry(list, drm_map_list_t, head);
 		if (r_list->map
-		    && r_list->map->offset == (unsigned long) request.handle)
+		    && r_list->user_token == (unsigned long) request.handle)
 			goto found;
 	}
 bad:
@@ -369,7 +380,7 @@ int drm_resctx( struct inode *inode, struct file *filp,
 		for ( i = 0 ; i < DRM_RESERVED_CONTEXTS ; i++ ) {
 			ctx.handle = i;
 			if ( copy_to_user( &res.contexts[i],
-					   &i, sizeof(i) ) )
+					   &ctx, sizeof(ctx) ) )
 				return -EFAULT;
 		}
 	}

drivers/char/drm/drm_drv.c

@@ -70,8 +70,8 @@ static drm_ioctl_desc_t		  drm_ioctls[] = {
 	[DRM_IOCTL_NR(DRM_IOCTL_UNBLOCK)]       = { drm_noop,        1, 1 },
 	[DRM_IOCTL_NR(DRM_IOCTL_AUTH_MAGIC)]    = { drm_authmagic,   1, 1 },
 
-	[DRM_IOCTL_NR(DRM_IOCTL_ADD_MAP)]       = { drm_addmap,      1, 1 },
-	[DRM_IOCTL_NR(DRM_IOCTL_RM_MAP)]        = { drm_rmmap,       1, 0 },
+	[DRM_IOCTL_NR(DRM_IOCTL_ADD_MAP)]       = { drm_addmap_ioctl,1, 1 },
+	[DRM_IOCTL_NR(DRM_IOCTL_RM_MAP)]        = { drm_rmmap_ioctl, 1, 0 },
 
 	[DRM_IOCTL_NR(DRM_IOCTL_SET_SAREA_CTX)] = { drm_setsareactx, 1, 1 },
 	[DRM_IOCTL_NR(DRM_IOCTL_GET_SAREA_CTX)] = { drm_getsareactx, 1, 0 },
@@ -102,10 +102,10 @@ static drm_ioctl_desc_t		  drm_ioctls[] = {
 	[DRM_IOCTL_NR(DRM_IOCTL_CONTROL)]       = { drm_control,     1, 1 },
 
 #if __OS_HAS_AGP
-	[DRM_IOCTL_NR(DRM_IOCTL_AGP_ACQUIRE)]   = { drm_agp_acquire, 1, 1 },
-	[DRM_IOCTL_NR(DRM_IOCTL_AGP_RELEASE)]   = { drm_agp_release, 1, 1 },
-	[DRM_IOCTL_NR(DRM_IOCTL_AGP_ENABLE)]    = { drm_agp_enable,  1, 1 },
-	[DRM_IOCTL_NR(DRM_IOCTL_AGP_INFO)]      = { drm_agp_info,    1, 0 },
+	[DRM_IOCTL_NR(DRM_IOCTL_AGP_ACQUIRE)]   = { drm_agp_acquire_ioctl, 1, 1 },
+	[DRM_IOCTL_NR(DRM_IOCTL_AGP_RELEASE)]   = { drm_agp_release_ioctl, 1, 1 },
+	[DRM_IOCTL_NR(DRM_IOCTL_AGP_ENABLE)]    = { drm_agp_enable_ioctl, 1, 1 },
+	[DRM_IOCTL_NR(DRM_IOCTL_AGP_INFO)]      = { drm_agp_info_ioctl, 1, 0 },
 	[DRM_IOCTL_NR(DRM_IOCTL_AGP_ALLOC)]     = { drm_agp_alloc,   1, 1 },
 	[DRM_IOCTL_NR(DRM_IOCTL_AGP_FREE)]      = { drm_agp_free,    1, 1 },
 	[DRM_IOCTL_NR(DRM_IOCTL_AGP_BIND)]      = { drm_agp_bind,    1, 1 },
@@ -127,14 +127,12 @@ static drm_ioctl_desc_t		  drm_ioctls[] = {
  *
  * Frees every resource in \p dev.
  *
- * \sa drm_device and setup().
+ * \sa drm_device
  */
 int drm_takedown( drm_device_t *dev )
 {
 	drm_magic_entry_t *pt, *next;
-	drm_map_t *map;
 	drm_map_list_t *r_list;
-	struct list_head *list, *list_next;
 	drm_vma_entry_t *vma, *vma_next;
 	int i;
 
@@ -142,6 +140,7 @@ int drm_takedown( drm_device_t *dev )
 
 	if (dev->driver->pretakedown)
 	  dev->driver->pretakedown(dev);
+	DRM_DEBUG("driver pretakedown completed\n");
 
 	if (dev->unique) {
 		drm_free(dev->unique, strlen(dev->unique) + 1, DRM_MEM_DRIVER);
@@ -178,11 +177,16 @@ int drm_takedown( drm_device_t *dev )
 		}
 		dev->agp->memory = NULL;
 
-		if ( dev->agp->acquired ) drm_agp_do_release(dev);
+		if (dev->agp->acquired)
+		  drm_agp_release(dev);
 
 		dev->agp->acquired = 0;
 		dev->agp->enabled  = 0;
 	}
+	if (drm_core_check_feature(dev, DRIVER_SG) && dev->sg) {
+		drm_sg_cleanup(dev->sg);
+		dev->sg = NULL;
+	}
 
 				/* Clear vma list (only built for debugging) */
 	if ( dev->vmalist ) {
@@ -194,48 +198,11 @@ int drm_takedown( drm_device_t *dev )
 	}
 
 	if( dev->maplist ) {
-		list_for_each_safe( list, list_next, &dev->maplist->head ) {
-			r_list = (drm_map_list_t *)list;
-
-			if ( ( map = r_list->map ) ) {
-				switch ( map->type ) {
-				case _DRM_REGISTERS:
-				case _DRM_FRAME_BUFFER:
-					if (drm_core_has_MTRR(dev)) {
-						if ( map->mtrr >= 0 ) {
-							int retcode;
-							retcode = mtrr_del( map->mtrr,
-									    map->offset,
-									    map->size );
-							DRM_DEBUG( "mtrr_del=%d\n", retcode );
-						}
-					}
-					drm_ioremapfree( map->handle, map->size, dev );
-					break;
-				case _DRM_SHM:
-					vfree(map->handle);
-					break;
-
-				case _DRM_AGP:
-					/* Do nothing here, because this is all
-					 * handled in the AGP/GART driver.
-					 */
-					break;
-				case _DRM_SCATTER_GATHER:
-					/* Handle it */
-					if (drm_core_check_feature(dev, DRIVER_SG) && dev->sg) {
-						drm_sg_cleanup(dev->sg);
-						dev->sg = NULL;
-					}
-					break;
-				}
-				drm_free(map, sizeof(*map), DRM_MEM_MAPS);
-			}
-			list_del( list );
-			drm_free(r_list, sizeof(*r_list), DRM_MEM_MAPS);
- 		}
-		drm_free(dev->maplist, sizeof(*dev->maplist), DRM_MEM_MAPS);
-		dev->maplist = NULL;
+		while (!list_empty(&dev->maplist->head)) {
+			struct list_head *list = dev->maplist->head.next;
+			r_list = list_entry(list, drm_map_list_t, head);
+			drm_rmmap_locked(dev, r_list->map);
+		}
  	}
 
 	if (drm_core_check_feature(dev, DRIVER_DMA_QUEUE) && dev->queuelist ) {
@@ -264,6 +231,7 @@ int drm_takedown( drm_device_t *dev )
 	}
 	up( &dev->struct_sem );
 
+	DRM_DEBUG("takedown completed\n");
 	return 0;
 }
 
@@ -312,7 +280,7 @@ EXPORT_SYMBOL(drm_init);
  *
  * Cleans up all DRM device, calling takedown().
  * 
- * \sa drm_init().
+ * \sa drm_init
  */
 static void drm_cleanup( drm_device_t *dev )
 {
@@ -325,6 +293,11 @@ static void drm_cleanup( drm_device_t *dev )
 
 	drm_takedown( dev );	
 
+	if (dev->maplist) {
+		drm_free(dev->maplist, sizeof(*dev->maplist), DRM_MEM_MAPS);
+		dev->maplist = NULL;
+	}
+
 	drm_ctxbitmap_cleanup( dev );
 	
 	if (drm_core_has_MTRR(dev) && drm_core_has_AGP(dev) &&

drivers/char/drm/drm_fops.c

@@ -71,12 +71,6 @@ static int drm_setup( drm_device_t *dev )
 		dev->magiclist[i].tail = NULL;
 	}
 
-	dev->maplist = drm_alloc(sizeof(*dev->maplist),
-				  DRM_MEM_MAPS);
-	if(dev->maplist == NULL) return -ENOMEM;
-	memset(dev->maplist, 0, sizeof(*dev->maplist));
-	INIT_LIST_HEAD(&dev->maplist->head);
-
 	dev->ctxlist = drm_alloc(sizeof(*dev->ctxlist),
 				  DRM_MEM_CTXLIST);
 	if(dev->ctxlist == NULL) return -ENOMEM;

drivers/char/drm/drm_ioctl.c

@@ -208,7 +208,7 @@ int drm_getmap( struct inode *inode, struct file *filp,
 	map.size   = r_list->map->size;
 	map.type   = r_list->map->type;
 	map.flags  = r_list->map->flags;
-	map.handle = r_list->map->handle;
+	map.handle = (void *)(unsigned long) r_list->user_token;
 	map.mtrr   = r_list->map->mtrr;
 	up(&dev->struct_sem);
 

drivers/char/drm/drm_memory.c

@@ -142,27 +142,31 @@ void drm_free_pages(unsigned long address, int order, int area)
 
 #if __OS_HAS_AGP
 /** Wrapper around agp_allocate_memory() */
-DRM_AGP_MEM *drm_alloc_agp(struct agp_bridge_data *bridge, int pages, u32 type)
+DRM_AGP_MEM *drm_alloc_agp(drm_device_t *dev, int pages, u32 type)
 {
-	return drm_agp_allocate_memory(bridge, pages, type);
+	return drm_agp_allocate_memory(dev->agp->bridge, pages, type);
 }
+EXPORT_SYMBOL(drm_alloc_agp);
 
 /** Wrapper around agp_free_memory() */
 int drm_free_agp(DRM_AGP_MEM *handle, int pages)
 {
 	return drm_agp_free_memory(handle) ? 0 : -EINVAL;
 }
+EXPORT_SYMBOL(drm_free_agp);
 
 /** Wrapper around agp_bind_memory() */
 int drm_bind_agp(DRM_AGP_MEM *handle, unsigned int start)
 {
 	return drm_agp_bind_memory(handle, start);
 }
+EXPORT_SYMBOL(drm_bind_agp);
 
 /** Wrapper around agp_unbind_memory() */
 int drm_unbind_agp(DRM_AGP_MEM *handle)
 {
 	return drm_agp_unbind_memory(handle);
 }
+EXPORT_SYMBOL(drm_unbind_agp);
 #endif /* agp */
 #endif /* debug_memory */

drivers/char/drm/drm_pci.c

@@ -46,11 +46,11 @@
 /**
  * \brief Allocate a PCI consistent memory block, for DMA.
  */
-void *drm_pci_alloc(drm_device_t * dev, size_t size, size_t align,
-		    dma_addr_t maxaddr, dma_addr_t * busaddr)
+drm_dma_handle_t *drm_pci_alloc(drm_device_t * dev, size_t size, size_t align,
+				dma_addr_t maxaddr)
 {
-	void *address;
-#if DRM_DEBUG_MEMORY
+	drm_dma_handle_t *dmah;
+#ifdef DRM_DEBUG_MEMORY
 	int area = DRM_MEM_DMA;
 
 	spin_lock(&drm_mem_lock);
@@ -74,13 +74,19 @@ void *drm_pci_alloc(drm_device_t * dev, size_t size, size_t align,
 		return NULL;
 	}
 
-	address = pci_alloc_consistent(dev->pdev, size, busaddr);
+	dmah = kmalloc(sizeof(drm_dma_handle_t), GFP_KERNEL);
+	if (!dmah)
+		return NULL;
+	
+	dmah->size = size;
+	dmah->vaddr = pci_alloc_consistent(dev->pdev, size, &dmah->busaddr);
 
-#if DRM_DEBUG_MEMORY
-	if (address == NULL) {
+#ifdef DRM_DEBUG_MEMORY
+	if (dmah->vaddr == NULL) {
 		spin_lock(&drm_mem_lock);
 		++drm_mem_stats[area].fail_count;
 		spin_unlock(&drm_mem_lock);
+		kfree(dmah);
 		return NULL;
 	}
 
@@ -90,37 +96,42 @@ void *drm_pci_alloc(drm_device_t * dev, size_t size, size_t align,
 	drm_ram_used += size;
 	spin_unlock(&drm_mem_lock);
 #else
-	if (address == NULL)
+	if (dmah->vaddr == NULL) {
+		kfree(dmah);
 		return NULL;
+	}
 #endif
 
-	memset(address, 0, size);
+	memset(dmah->vaddr, 0, size);
 
-	return address;
+	return dmah;
 }
 EXPORT_SYMBOL(drm_pci_alloc);
 
 /**
- * \brief Free a PCI consistent memory block.
+ * \brief Free a PCI consistent memory block with freeing its descriptor.
+ *
+ * This function is for internal use in the Linux-specific DRM core code.
  */
 void
-drm_pci_free(drm_device_t * dev, size_t size, void *vaddr, dma_addr_t busaddr)
+__drm_pci_free(drm_device_t * dev, drm_dma_handle_t *dmah)
 {
-#if DRM_DEBUG_MEMORY
+#ifdef DRM_DEBUG_MEMORY
 	int area = DRM_MEM_DMA;
 	int alloc_count;
 	int free_count;
 #endif
 
-	if (!vaddr) {
-#if DRM_DEBUG_MEMORY
+	if (!dmah->vaddr) {
+#ifdef DRM_DEBUG_MEMORY
 		DRM_MEM_ERROR(area, "Attempt to free address 0\n");
 #endif
 	} else {
-		pci_free_consistent(dev->pdev, size, vaddr, busaddr);
+		pci_free_consistent(dev->pdev, dmah->size, dmah->vaddr,
+				    dmah->busaddr);
 	}
 
-#if DRM_DEBUG_MEMORY
+#ifdef DRM_DEBUG_MEMORY
 	spin_lock(&drm_mem_lock);
 	free_count = ++drm_mem_stats[area].free_count;
 	alloc_count = drm_mem_stats[area].succeed_count;
@@ -135,6 +146,16 @@ drm_pci_free(drm_device_t * dev, size_t size, void *vaddr, dma_addr_t busaddr)
 #endif
 
 }
+
+/**
+ * \brief Free a PCI consistent memory block
+ */
+void
+drm_pci_free(drm_device_t *dev, drm_dma_handle_t *dmah)
+{
+	__drm_pci_free(dev, dmah);
+	kfree(dmah);
+}
 EXPORT_SYMBOL(drm_pci_free);
 
 /*@}*/

drivers/char/drm/drm_pciids.h

@@ -25,6 +25,8 @@
 	{0x1002, 0x4965, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R250}, \
 	{0x1002, 0x4966, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R250}, \
 	{0x1002, 0x4967, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R250}, \
+	{0x1002, 0x4A49, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420}, \
+	{0x1002, 0x4A4B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420}, \
 	{0x1002, 0x4C57, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV200|CHIP_IS_MOBILITY}, \
 	{0x1002, 0x4C58, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV200|CHIP_IS_MOBILITY}, \
 	{0x1002, 0x4C59, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV100|CHIP_IS_MOBILITY}, \
@@ -33,7 +35,17 @@
 	{0x1002, 0x4C65, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R250|CHIP_IS_MOBILITY}, \
 	{0x1002, 0x4C66, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R250|CHIP_IS_MOBILITY}, \
 	{0x1002, 0x4C67, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R250|CHIP_IS_MOBILITY}, \
+	{0x1002, 0x4E44, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R300}, \
+	{0x1002, 0x4E45, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R300}, \
+	{0x1002, 0x4E46, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV350}, \
+	{0x1002, 0x4E47, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R300}, \
+	{0x1002, 0x4E48, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R350}, \
+	{0x1002, 0x4E49, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R350}, \
+	{0x1002, 0x4E4A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV350}, \
+	{0x1002, 0x4E4B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R350}, \
 	{0x1002, 0x4E50, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV350|CHIP_IS_MOBILITY}, \
+	{0x1002, 0x4E51, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV350|CHIP_IS_MOBILITY}, \
+	{0x1002, 0x4E54, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV350|CHIP_IS_MOBILITY}, \
 	{0x1002, 0x5144, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R100|CHIP_SINGLE_CRTC}, \
 	{0x1002, 0x5145, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R100|CHIP_SINGLE_CRTC}, \
 	{0x1002, 0x5146, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R100|CHIP_SINGLE_CRTC}, \
@@ -56,6 +68,7 @@
 	{0x1002, 0x516A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R200}, \
 	{0x1002, 0x516B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R200}, \
 	{0x1002, 0x516C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R200}, \
+	{0x1002, 0x5460, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV350}, \
 	{0x1002, 0x5834, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS300|CHIP_IS_IGP}, \
 	{0x1002, 0x5835, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS300|CHIP_IS_IGP|CHIP_IS_MOBILITY}, \
 	{0x1002, 0x5836, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS300|CHIP_IS_IGP}, \
@@ -116,9 +129,10 @@
 	{0, 0, 0}
 
 #define mga_PCI_IDS \
-	{0x102b, 0x0521, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
-	{0x102b, 0x0525, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
-	{0x102b, 0x2527, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x102b, 0x0520, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MGA_CARD_TYPE_G200}, \
+	{0x102b, 0x0521, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MGA_CARD_TYPE_G200}, \
+	{0x102b, 0x0525, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MGA_CARD_TYPE_G400}, \
+	{0x102b, 0x2527, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MGA_CARD_TYPE_G550}, \
 	{0, 0, 0}
 
 #define mach64_PCI_IDS \
@@ -162,9 +176,10 @@
 
 #define viadrv_PCI_IDS \
 	{0x1106, 0x3022, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x1106, 0x3118, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
 	{0x1106, 0x3122, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
 	{0x1106, 0x7205, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
-	{0x1106, 0x7204, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x1106, 0x3108, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
 	{0, 0, 0}
 
 #define i810_PCI_IDS \
@@ -181,33 +196,30 @@
 	{0x8086, 0x2572, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
 	{0, 0, 0}
 
-#define gamma_PCI_IDS \
-	{0x3d3d, 0x0008, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
-	{0, 0, 0}
-
 #define savage_PCI_IDS \
-	{0x5333, 0x8a22, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
-	{0x5333, 0x8a23, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
-	{0x5333, 0x8c10, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
-	{0x5333, 0x8c11, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
-	{0x5333, 0x8c12, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
-	{0x5333, 0x8c13, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
-	{0x5333, 0x8c20, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
-	{0x5333, 0x8c21, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
-	{0x5333, 0x8c22, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
-	{0x5333, 0x8c24, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
-	{0x5333, 0x8c26, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
-	{0x5333, 0x8c2a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
-	{0x5333, 0x8c2b, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
-	{0x5333, 0x8c2c, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
-	{0x5333, 0x8c2d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
-	{0x5333, 0x8c2e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
-	{0x5333, 0x8c2f, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
-	{0x5333, 0x8a25, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
-	{0x5333, 0x8a26, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
-	{0x5333, 0x8d01, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
-	{0x5333, 0x8d02, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
-	{0x5333, 0x8d04, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x5333, 0x8a20, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_SAVAGE3D}, \
+	{0x5333, 0x8a21, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_SAVAGE3D}, \
+	{0x5333, 0x8a22, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_SAVAGE4}, \
+	{0x5333, 0x8a23, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_SAVAGE4}, \
+	{0x5333, 0x8c10, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_SAVAGE_MX}, \
+	{0x5333, 0x8c11, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_SAVAGE_MX}, \
+	{0x5333, 0x8c12, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_SAVAGE_MX}, \
+	{0x5333, 0x8c13, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_SAVAGE_MX}, \
+	{0x5333, 0x8c22, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_SUPERSAVAGE}, \
+	{0x5333, 0x8c24, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_SUPERSAVAGE}, \
+	{0x5333, 0x8c26, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_SUPERSAVAGE}, \
+	{0x5333, 0x8c2a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_SUPERSAVAGE}, \
+	{0x5333, 0x8c2b, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_SUPERSAVAGE}, \
+	{0x5333, 0x8c2c, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_SUPERSAVAGE}, \
+	{0x5333, 0x8c2d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_SUPERSAVAGE}, \
+	{0x5333, 0x8c2e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_SUPERSAVAGE}, \
+	{0x5333, 0x8c2f, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_SUPERSAVAGE}, \
+	{0x5333, 0x8a25, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_PROSAVAGE}, \
+	{0x5333, 0x8a26, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_PROSAVAGE}, \
+	{0x5333, 0x8d01, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_TWISTER}, \
+	{0x5333, 0x8d02, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_TWISTER}, \
+	{0x5333, 0x8d03, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_PROSAVAGEDDR}, \
+	{0x5333, 0x8d04, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_PROSAVAGEDDR}, \
 	{0, 0, 0}
 
 #define ffb_PCI_IDS \
@@ -223,10 +235,3 @@
 	{0x8086, 0x2772, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
 	{0, 0, 0}
 
-#define viadrv_PCI_IDS \
-	{0x1106, 0x3022, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
-	{0x1106, 0x3122, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
-	{0x1106, 0x7205, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
-	{0x1106, 0x7204, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
-	{0, 0, 0}
-