Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Minor overlapping changes in the conflicts.

In the macsec case, the change of the default ID macro
name overlapped with the 64-bit netlink attribute alignment
fixes in net-next.

Signed-off-by: David S. Miller <davem@davemloft.net>

Documentation/devicetree/bindings/arm/cpus.txt

@@ -192,7 +192,6 @@ nodes to be present and contain the properties described below.
 			  can be one of:
 			    "allwinner,sun6i-a31"
 			    "allwinner,sun8i-a23"
-			    "arm,psci"
 			    "arm,realview-smp"
 			    "brcm,bcm-nsp-smp"
 			    "brcm,brahma-b15"

Documentation/devicetree/bindings/phy/rockchip-dp-phy.txt

@@ -8,15 +8,19 @@ Required properties:
 	of memory mapped region.
 - clock-names: from common clock binding:
 	Required elements: "24m"
-- rockchip,grf: phandle to the syscon managing the "general register files"
 - #phy-cells : from the generic PHY bindings, must be 0;
 
 Example:
 
-edp_phy: edp-phy {
-	compatible = "rockchip,rk3288-dp-phy";
-	rockchip,grf = <&grf>;
-	clocks = <&cru SCLK_EDP_24M>;
-	clock-names = "24m";
-	#phy-cells = <0>;
+grf: syscon@ff770000 {
+	compatible = "rockchip,rk3288-grf", "syscon", "simple-mfd";
+
+...
+
+	edp_phy: edp-phy {
+		compatible = "rockchip,rk3288-dp-phy";
+		clocks = <&cru SCLK_EDP_24M>;
+		clock-names = "24m";
+		#phy-cells = <0>;
+	};
 };

Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt

@@ -3,17 +3,23 @@ Rockchip EMMC PHY
 
 Required properties:
  - compatible: rockchip,rk3399-emmc-phy
- - rockchip,grf : phandle to the syscon managing the "general
-   register files"
  - #phy-cells: must be 0
- - reg: PHY configure reg address offset in "general
+ - reg: PHY register address offset and length in "general
    register files"
 
 Example:
 
-emmcphy: phy {
-	compatible = "rockchip,rk3399-emmc-phy";
-	rockchip,grf = <&grf>;
-	reg = <0xf780>;
-	#phy-cells = <0>;
+
+grf: syscon@ff770000 {
+	compatible = "rockchip,rk3399-grf", "syscon", "simple-mfd";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+...
+
+	emmcphy: phy@f780 {
+		compatible = "rockchip,rk3399-emmc-phy";
+		reg = <0xf780 0x20>;
+		#phy-cells = <0>;
+	};
 };

Documentation/input/event-codes.txt

@@ -173,6 +173,10 @@ A few EV_ABS codes have special meanings:
     proximity of the device and while the value of the BTN_TOUCH code is 0. If
     the input device may be used freely in three dimensions, consider ABS_Z
     instead.
+  - BTN_TOOL_<name> should be set to 1 when the tool comes into detectable
+    proximity and set to 0 when the tool leaves detectable proximity.
+    BTN_TOOL_<name> signals the type of tool that is currently detected by the
+    hardware and is otherwise independent of ABS_DISTANCE and/or BTN_TOUCH.
 
 * ABS_MT_<name>:
   - Used to describe multitouch input events. Please see

Documentation/x86/x86_64/mm.txt

@@ -19,7 +19,7 @@ ffffff0000000000 - ffffff7fffffffff (=39 bits) %esp fixup stacks
 ffffffef00000000 - ffffffff00000000 (=64 GB) EFI region mapping space
 ... unused hole ...
 ffffffff80000000 - ffffffffa0000000 (=512 MB)  kernel text mapping, from phys 0
-ffffffffa0000000 - ffffffffff5fffff (=1525 MB) module mapping space
+ffffffffa0000000 - ffffffffff5fffff (=1526 MB) module mapping space
 ffffffffff600000 - ffffffffffdfffff (=8 MB) vsyscalls
 ffffffffffe00000 - ffffffffffffffff (=2 MB) unused hole
 
@@ -31,8 +31,8 @@ vmalloc space is lazily synchronized into the different PML4 pages of
 the processes using the page fault handler, with init_level4_pgt as
 reference.
 
-Current X86-64 implementations only support 40 bits of address space,
-but we support up to 46 bits. This expands into MBZ space in the page tables.
+Current X86-64 implementations support up to 46 bits of address space (64 TB),
+which is our current limit. This expands into MBZ space in the page tables.
 
 We map EFI runtime services in the 'efi_pgd' PGD in a 64Gb large virtual
 memory window (this size is arbitrary, it can be raised later if needed).

MAINTAINERS

@@ -11072,6 +11072,15 @@ S:	Maintained
 F:	drivers/clk/ti/
 F:	include/linux/clk/ti.h
 
+TI ETHERNET SWITCH DRIVER (CPSW)
+M:	Mugunthan V N <mugunthanvnm@ti.com>
+R:	Grygorii Strashko <grygorii.strashko@ti.com>
+L:	linux-omap@vger.kernel.org
+L:	netdev@vger.kernel.org
+S:	Maintained
+F:	drivers/net/ethernet/ti/cpsw*
+F:	drivers/net/ethernet/ti/davinci*
+
 TI FLASH MEDIA INTERFACE DRIVER
 M:	Alex Dubov <oakad@yahoo.com>
 S:	Maintained

Makefile

@@ -1,7 +1,7 @@
 VERSION = 4
 PATCHLEVEL = 6
 SUBLEVEL = 0
-EXTRAVERSION = -rc4
+EXTRAVERSION = -rc5
 NAME = Blurry Fish Butt
 
 # *DOCUMENTATION*
@@ -1008,7 +1008,8 @@ prepare0: archprepare FORCE
 prepare: prepare0 prepare-objtool
 
 ifdef CONFIG_STACK_VALIDATION
-  has_libelf := $(shell echo "int main() {}" | $(HOSTCC) -xc -o /dev/null -lelf - &> /dev/null && echo 1 || echo 0)
+  has_libelf := $(call try-run,\
+		echo "int main() {}" | $(HOSTCC) -xc -o /dev/null -lelf -,1,0)
   ifeq ($(has_libelf),1)
     objtool_target := tools/objtool FORCE
   else

arch/arm/boot/dts/am33xx.dtsi

@@ -860,7 +860,7 @@
 			ti,no-idle-on-init;
 			reg = <0x50000000 0x2000>;
 			interrupts = <100>;
-			dmas = <&edma 52>;
+			dmas = <&edma 52 0>;
 			dma-names = "rxtx";
 			gpmc,num-cs = <7>;
 			gpmc,num-waitpins = <2>;

arch/arm/boot/dts/am4372.dtsi

@@ -884,7 +884,7 @@
 		gpmc: gpmc@50000000 {
 			compatible = "ti,am3352-gpmc";
 			ti,hwmods = "gpmc";
-			dmas = <&edma 52>;
+			dmas = <&edma 52 0>;
 			dma-names = "rxtx";
 			clocks = <&l3s_gclk>;
 			clock-names = "fck";

arch/arm/boot/dts/am57xx-beagle-x15.dts

@@ -99,13 +99,6 @@
 		#cooling-cells = <2>;
 	};
 
-	extcon_usb1: extcon_usb1 {
-		compatible = "linux,extcon-usb-gpio";
-		id-gpio = <&gpio7 25 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&extcon_usb1_pins>;
-	};
-
 	hdmi0: connector {
 		compatible = "hdmi-connector";
 		label = "hdmi";
@@ -349,12 +342,6 @@
 		>;
 	};
 
-	extcon_usb1_pins: extcon_usb1_pins {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MUX_MODE14) /* uart1_rtsn.gpio7_25 */
-		>;
-	};
-
 	tpd12s015_pins: pinmux_tpd12s015_pins {
 		pinctrl-single,pins = <
 			DRA7XX_CORE_IOPAD(0x37b0, PIN_OUTPUT | MUX_MODE14)		/* gpio7_10 CT_CP_HPD */
@@ -706,10 +693,6 @@
 	pinctrl-0 = <&usb1_pins>;
 };
 
-&omap_dwc3_1 {
-	extcon = <&extcon_usb1>;
-};
-
 &omap_dwc3_2 {
 	extcon = <&extcon_usb2>;
 };

arch/arm/boot/dts/dm814x-clocks.dtsi

@@ -4,6 +4,157 @@
  * published by the Free Software Foundation.
  */
 
+&pllss {
+	/*
+	 * See TRM "2.6.10 Connected outputso DPLLS" and
+	 * "2.6.11 Connected Outputs of DPLLJ". Only clkout is
+	 * connected except for hdmi and usb.
+	 */
+	adpll_mpu_ck: adpll@40 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-s-clock";
+		reg = <0x40 0x40>;
+		clocks = <&devosc_ck &devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow", "clkinphif";
+		clock-output-names = "481c5040.adpll.dcoclkldo",
+				     "481c5040.adpll.clkout",
+				     "481c5040.adpll.clkoutx2",
+				     "481c5040.adpll.clkouthif";
+	};
+
+	adpll_dsp_ck: adpll@80 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-lj-clock";
+		reg = <0x80 0x30>;
+		clocks = <&devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow";
+		clock-output-names = "481c5080.adpll.dcoclkldo",
+				     "481c5080.adpll.clkout",
+				     "481c5080.adpll.clkoutldo";
+	};
+
+	adpll_sgx_ck: adpll@b0 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-lj-clock";
+		reg = <0xb0 0x30>;
+		clocks = <&devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow";
+		clock-output-names = "481c50b0.adpll.dcoclkldo",
+				     "481c50b0.adpll.clkout",
+				     "481c50b0.adpll.clkoutldo";
+	};
+
+	adpll_hdvic_ck: adpll@e0 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-lj-clock";
+		reg = <0xe0 0x30>;
+		clocks = <&devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow";
+		clock-output-names = "481c50e0.adpll.dcoclkldo",
+				     "481c50e0.adpll.clkout",
+				     "481c50e0.adpll.clkoutldo";
+	};
+
+	adpll_l3_ck: adpll@110 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-lj-clock";
+		reg = <0x110 0x30>;
+		clocks = <&devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow";
+		clock-output-names = "481c5110.adpll.dcoclkldo",
+				     "481c5110.adpll.clkout",
+				     "481c5110.adpll.clkoutldo";
+	};
+
+	adpll_isp_ck: adpll@140 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-lj-clock";
+		reg = <0x140 0x30>;
+		clocks = <&devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow";
+		clock-output-names = "481c5140.adpll.dcoclkldo",
+				     "481c5140.adpll.clkout",
+				     "481c5140.adpll.clkoutldo";
+	};
+
+	adpll_dss_ck: adpll@170 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-lj-clock";
+		reg = <0x170 0x30>;
+		clocks = <&devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow";
+		clock-output-names = "481c5170.adpll.dcoclkldo",
+				     "481c5170.adpll.clkout",
+				     "481c5170.adpll.clkoutldo";
+	};
+
+	adpll_video0_ck: adpll@1a0 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-lj-clock";
+		reg = <0x1a0 0x30>;
+		clocks = <&devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow";
+		clock-output-names = "481c51a0.adpll.dcoclkldo",
+				     "481c51a0.adpll.clkout",
+				     "481c51a0.adpll.clkoutldo";
+	};
+
+	adpll_video1_ck: adpll@1d0 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-lj-clock";
+		reg = <0x1d0 0x30>;
+		clocks = <&devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow";
+		clock-output-names = "481c51d0.adpll.dcoclkldo",
+				     "481c51d0.adpll.clkout",
+				     "481c51d0.adpll.clkoutldo";
+	};
+
+	adpll_hdmi_ck: adpll@200 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-lj-clock";
+		reg = <0x200 0x30>;
+		clocks = <&devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow";
+		clock-output-names = "481c5200.adpll.dcoclkldo",
+				     "481c5200.adpll.clkout",
+				     "481c5200.adpll.clkoutldo";
+	};
+
+	adpll_audio_ck: adpll@230 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-lj-clock";
+		reg = <0x230 0x30>;
+		clocks = <&devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow";
+		clock-output-names = "481c5230.adpll.dcoclkldo",
+				     "481c5230.adpll.clkout",
+				     "481c5230.adpll.clkoutldo";
+	};
+
+	adpll_usb_ck: adpll@260 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-lj-clock";
+		reg = <0x260 0x30>;
+		clocks = <&devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow";
+		clock-output-names = "481c5260.adpll.dcoclkldo",
+				     "481c5260.adpll.clkout",
+				     "481c5260.adpll.clkoutldo";
+	};
+
+	adpll_ddr_ck: adpll@290 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-lj-clock";
+		reg = <0x290 0x30>;
+		clocks = <&devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow";
+		clock-output-names = "481c5290.adpll.dcoclkldo",
+				     "481c5290.adpll.clkout",
+				     "481c5290.adpll.clkoutldo";
+	};
+};
+
 &pllss_clocks {
 	timer1_fck: timer1_fck {
 		#clock-cells = <0>;
@@ -23,6 +174,24 @@
 		reg = <0x2e0>;
 	};
 
+	/* CPTS_RFT_CLK in RMII_REFCLK_SRC, usually sourced from auiod */
+	cpsw_cpts_rft_clk: cpsw_cpts_rft_clk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&adpll_video0_ck 1
+			  &adpll_video1_ck 1
+			  &adpll_audio_ck 1>;
+		ti,bit-shift = <1>;
+		reg = <0x2e8>;
+	};
+
+	/* REVISIT: Set up with a proper mux using RMII_REFCLK_SRC */
+	cpsw_125mhz_gclk: cpsw_125mhz_gclk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+	};
+
 	sysclk18_ck: sysclk18_ck {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
@@ -79,37 +248,6 @@
 		compatible = "fixed-clock";
 		clock-frequency = <1000000000>;
 	};
-
-	sysclk4_ck: sysclk4_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <222000000>;
-	};
-
-	sysclk6_ck: sysclk6_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <100000000>;
-	};
-
-	sysclk10_ck: sysclk10_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <48000000>;
-	};
-
-        cpsw_125mhz_gclk: cpsw_125mhz_gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <125000000>;
-	};
-
-	cpsw_cpts_rft_clk: cpsw_cpts_rft_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <250000000>;
-	};
-
 };
 
 &prcm_clocks {
@@ -138,6 +276,49 @@
 		clock-div = <78125>;
 	};
 
+	/* L4_HS 220 MHz*/
+	sysclk4_ck: sysclk4_ck {
+		#clock-cells = <0>;
+		compatible = "ti,fixed-factor-clock";
+		clocks = <&adpll_l3_ck 1>;
+		ti,clock-mult = <1>;
+		ti,clock-div = <1>;
+	};
+
+	/* L4_FWCFG */
+	sysclk5_ck: sysclk5_ck {
+		#clock-cells = <0>;
+		compatible = "ti,fixed-factor-clock";
+		clocks = <&adpll_l3_ck 1>;
+		ti,clock-mult = <1>;
+		ti,clock-div = <2>;
+	};
+
+	/* L4_LS 110 MHz */
+	sysclk6_ck: sysclk6_ck {
+		#clock-cells = <0>;
+		compatible = "ti,fixed-factor-clock";
+		clocks = <&adpll_l3_ck 1>;
+		ti,clock-mult = <1>;
+		ti,clock-div = <2>;
+	};
+
+	sysclk8_ck: sysclk8_ck {
+		#clock-cells = <0>;
+		compatible = "ti,fixed-factor-clock";
+		clocks = <&adpll_usb_ck 1>;
+		ti,clock-mult = <1>;
+		ti,clock-div = <1>;
+	};
+
+	sysclk10_ck: sysclk10_ck {
+		compatible = "ti,divider-clock";
+		reg = <0x324>;
+		ti,max-div = <7>;
+		#clock-cells = <0>;
+		clocks = <&adpll_usb_ck 1>;
+	};
+
 	aud_clkin0_ck: aud_clkin0_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";

arch/arm/boot/dts/dra62x-clocks.dtsi

@@ -6,6 +6,32 @@
 
 #include "dm814x-clocks.dtsi"
 
+/* Compared to dm814x, dra62x does not have hdic, l3 or dss PLLs */
+&adpll_hdvic_ck {
+	status = "disabled";
+};
+
+&adpll_l3_ck {
+	status = "disabled";
+};
+
+&adpll_dss_ck {
+	status = "disabled";
+};
+
+/* Compared to dm814x, dra62x has interconnect clocks on isp PLL */
+&sysclk4_ck {
+	clocks = <&adpll_isp_ck 1>;
+};
+
+&sysclk5_ck {
+	clocks = <&adpll_isp_ck 1>;
+};
+
+&sysclk6_ck {
+	clocks = <&adpll_isp_ck 1>;
+};
+
 /*
  * Compared to dm814x, dra62x has different shifts and more mux options.
  * Please add the extra options for ysclk_14 and 16 if really needed.

arch/arm/boot/dts/dra7xx-clocks.dtsi

@@ -98,12 +98,20 @@
 		clock-frequency = <32768>;
 	};
 
-	sys_32k_ck: sys_32k_ck {
+	sys_clk32_crystal_ck: sys_clk32_crystal_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
 	};
 
+	sys_clk32_pseudo_ck: sys_clk32_pseudo_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin1>;
+		clock-mult = <1>;
+		clock-div = <610>;
+	};
+
 	virt_12000000_ck: virt_12000000_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
@@ -2170,4 +2178,12 @@
 		ti,bit-shift = <22>;
 		reg = <0x0558>;
 	};
+
+	sys_32k_ck: sys_32k_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clk32_crystal_ck>, <&sys_clk32_pseudo_ck>, <&sys_clk32_pseudo_ck>, <&sys_clk32_pseudo_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x6c4>;
+	};
 };

arch/arm/boot/dts/qcom-msm8974.dtsi

@@ -1,6 +1,6 @@
 /dts-v1/;
 
-#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/clock/qcom,gcc-msm8974.h>
 #include "skeleton.dtsi"
 
@@ -460,8 +460,6 @@
 			clock-names = "core", "iface";
 			#address-cells = <1>;
 			#size-cells = <0>;
-			dmas = <&blsp2_dma 20>, <&blsp2_dma 21>;
-			dma-names = "tx", "rx";
 		};
 
 		spmi_bus: spmi@fc4cf000 {
@@ -479,16 +477,6 @@
 			interrupt-controller;
 			#interrupt-cells = <4>;
 		};
-
-		blsp2_dma: dma-controller@f9944000 {
-			compatible = "qcom,bam-v1.4.0";
-			reg = <0xf9944000 0x19000>;
-			interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP2_AHB_CLK>;
-			clock-names = "bam_clk";
-			#dma-cells = <1>;
-			qcom,ee = <0>;
-		};
 	};
 
 	smd {

arch/arm/boot/dts/r8a7791-koelsch.dts

@@ -661,6 +661,7 @@
 };
 
 &pcie_bus_clk {
+	clock-frequency = <100000000>;
 	status = "okay";
 };
 

arch/arm/boot/dts/r8a7791-porter.dts

@@ -143,19 +143,11 @@
 };
 
 &pfc {
-	pinctrl-0 = <&scif_clk_pins>;
-	pinctrl-names = "default";
-
 	scif0_pins: serial0 {
 		renesas,groups = "scif0_data_d";
 		renesas,function = "scif0";
 	};
 
-	scif_clk_pins: scif_clk {
-		renesas,groups = "scif_clk";
-		renesas,function = "scif_clk";
-	};
-
 	ether_pins: ether {
 		renesas,groups = "eth_link", "eth_mdio", "eth_rmii";
 		renesas,function = "eth";
@@ -229,11 +221,6 @@
 	status = "okay";
 };
 
-&scif_clk {
-	clock-frequency = <14745600>;
-	status = "okay";
-};
-
 &ether {
 	pinctrl-0 = <&ether_pins &phy1_pins>;
 	pinctrl-names = "default";
@@ -414,6 +401,7 @@
 };
 
 &pcie_bus_clk {
+	clock-frequency = <100000000>;
 	status = "okay";
 };
 

arch/arm/boot/dts/r8a7791.dtsi

@@ -1083,9 +1083,8 @@
 		pcie_bus_clk: pcie_bus_clk {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
-			clock-frequency = <100000000>;
+			clock-frequency = <0>;
 			clock-output-names = "pcie_bus";
-			status = "disabled";
 		};
 
 		/* External SCIF clock */
@@ -1094,7 +1093,6 @@
 			#clock-cells = <0>;
 			/* This value must be overridden by the board. */
 			clock-frequency = <0>;
-			status = "disabled";
 		};
 
 		/* External USB clock - can be overridden by the board */
@@ -1112,7 +1110,6 @@
 			/* This value must be overridden by the board. */
 			clock-frequency = <0>;
 			clock-output-names = "can_clk";
-			status = "disabled";
 		};
 
 		/* Special CPG clocks */

arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c

@@ -71,6 +71,7 @@ struct platform_device *__init imx_add_sdhci_esdhc_imx(
 	if (!pdata)
 		pdata = &default_esdhc_pdata;
 
-	return imx_add_platform_device(data->devid, data->id, res,
-			ARRAY_SIZE(res), pdata, sizeof(*pdata));
+	return imx_add_platform_device_dmamask(data->devid, data->id, res,
+			ARRAY_SIZE(res), pdata, sizeof(*pdata),
+			DMA_BIT_MASK(32));
 }

arch/arm/mach-omap2/clockdomains7xx_data.c

@@ -461,7 +461,7 @@ static struct clockdomain ipu_7xx_clkdm = {
 	.cm_inst	  = DRA7XX_CM_CORE_AON_IPU_INST,
 	.clkdm_offs	  = DRA7XX_CM_CORE_AON_IPU_IPU_CDOFFS,
 	.dep_bit	  = DRA7XX_IPU_STATDEP_SHIFT,
-	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
+	.flags		  = CLKDM_CAN_SWSUP,
 };
 
 static struct clockdomain mpu1_7xx_clkdm = {

arch/arm/mach-omap2/io.c

@@ -737,7 +737,8 @@ void __init omap5_init_late(void)
 #ifdef CONFIG_SOC_DRA7XX
 void __init dra7xx_init_early(void)
 {
-	omap2_set_globals_tap(-1, OMAP2_L4_IO_ADDRESS(DRA7XX_TAP_BASE));
+	omap2_set_globals_tap(DRA7XX_CLASS,
+			      OMAP2_L4_IO_ADDRESS(DRA7XX_TAP_BASE));
 	omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRCM_MPU_BASE));
 	omap2_control_base_init();
 	omap4_pm_init_early();